A 1 mWh Advanced Iron-Chromium Redox Flow Battery and 200 Kw Li-Ion Battery Hybrid Unit

Abstract

An aqueous-based true redox flow battery has many unique advantages, such as long lifetime, safe, non-capacity decay, minimal disposal requirement, and flexible power and energy design. All these make it a great candidate for the vast renewable energy storage market. The key issue with this technology is the cost and availability of the energy-storage media. Due to the limited vanadium resources, it is very difficult for the widely studied vanadium-based redox flow battery to be commercially used for fast-growing renewable energy storage market.Iron-chromium redox flow battery was invented by Dr. Larry Thaller’s group in NASA more than 45 years ago. The unique advantages for this system are the abundance of Fe and Cr resources on earth and its low energy storage cost. Even for a mixed Fe/Cr system, the electrolyte cost is still less than 10$/kWh. The major issue with this system is the continuous capacity decay due to hydrogen generation, which makes this system impractical for long-term operations.In the past two years, this limiting problem was successfully solved by researchers at Creek Channel, Inc.1,2 By using a special system design, the hydrogen generation level was largely reduced, down to less than 0.5% per full cycle. A capacity recovery system was also successfully developed, which can compensate the system capacity loss due to hydrogen generation. More than 1000 cycles of operation have been carried out using a system with a kW-scale stack and 100 L electrolyte over a few months. Stable system capacity and stable continuous operation were successfully achieved.With these breakthrough results, a demonstration project of 30 MWh capacity using containerized product is being developed at Lion Creek Co. Ltd. For a 20’ ISO container-sized product, the deliverable energy is 250 kWh, and the max discharge capacity is 35 kW. For a Two 40’ ISO container-sized product, by using a hybrid design integrating with a 200 kW and 100 kWh Li-ion battery, the deliverable energy is 1100 kWh, and the long-duration discharge power can be as high as 330 kW. Larger projects can be readily built up using multiple 1.1 MWh units. The cost for such these products is lower than 100$/kWh, and the energy storage cost using this product is less than $0.02/kWh. With this energy storage cost, it is possible to achieve our ambitious 100% renewable energy goal in the near future.In this poster, we will present our recent progress on the development of a 1 MWh advanced Fe-Cr redox flow battery and 200 kW Li-ion battery hybrid unit. US 10777836 B1. Redox Flow Battery Systems Including a Balance Arrangement and Methods of Manufacture and Operation.US 10826102 B1. Fe-Cr Redox Flow Battery Systems Including a Balance Arrangement and Methods of Manufacture and Operation. Figure 1