Abstract
A ultra-wideband low noise amplifier (LNA) with integrated notch filter for interference rejection is designed using 0.18-μm CMOS technology. The three–stage LNA employs a current reuse structure to reduce the power consumption and a serial LC circuit with Q-enhancement circuit to produce band rejection in the 5-6GHz frequency band. The load tank optimization for the current reuse stage is discussed for gain flatness tuning Measurements show that this LNA has a peak gain of 21.5dB in the low band (3-5GHz) and 15 dB in the high band (6-10GHz) while consuming 12mA of current from a 1.8V DC supply. The measured noise figure (NF) and IIP3 are 4.0dB and -18.5dBm at 3.5GHz, 5.1dB and -15.5dBm at 7.2GHz respectively. A 6-12dB gain notch in the 5-6GHz is realized for interference rejection.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
