Abstract
This chapter begins with a discussion of the IPv6 addressing architecture, as designed by the original IPng working groups. The most obvious difference between IPv4 and IPv6 is in their addressing formats. IPv4 uses 32-bit (4-byte) addresses to uniquely identify nodes within the global Internet. IPv6 uses 128-bit (16-byte) addresses to uniquely identify nodes within the global Internet. It also discusses the IPv6 address space, address formats, and the way in which addresses are intended to be allocated. IPv6 does away with broadcasts, relies instead on unicast and multicast and adds a new category: anycast addresses. Three types of addresses unicast, multicast, and anycast are discussed, and unicast is defined as an identifier for a single interface. A packet sent to a unicast address is delivered to the interface identified by that address. Multicast and anycast addressing is discussed in the chapter.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.