Abstract
본 논문에서는 부궤환 회로, 푸쉬풀 구조, 광대역 RF choke, 전송 선로 트랜스포머를 이용하여 30~512 MHz의 초광대역에서 동작하는 100 W 고효율 전력 증폭기를 설계하였다. 출력 전력을 향상시키고자 전송 선로를 이용한 트랜스포머에 병렬로 커패시터를 삽입하여 적절하게 로드 임피던스를 정합하였다. 제작한 광대역 전력 증폭기는 동작 주파수 대역에서 100 W 이상의 출력 전력과 <TEX>$18.34{\pm}0.9\;dB$</TEX>의 높고 고른 이득 특성을 보였다. one-tone 측정에서 2차 고조파는 -34 dBc 이하, 3차 고조파는 -12 dBc 이하의 선형성 특성을 보였으며, 출력 전력 100 W에서 약 40% 이상의 고효율 특성을 보였다. This paper presents a design of a 100 W high-efficiency power amplifier, whose operational frequency band expands from 30 to 512 MHz, using negative feedback network, push-pull structure, broadband RF choke, and transmission line transformer for balun configuration. The push-pull amplifier has been tuned for higher output power using a shunt capacitor as a matching component at its load especially for high-frequency region. The implemented power amplifier exhibited a very flat power gain of <TEX>$18.34{\pm}0.9\;dB$</TEX> throughout the operating frequency band and very high power-added efficiency(PAE) of greater than 40% at an output power of 100 W. It also showed second- and third-harmonic distortion levels of below -34 dBc and -12 dBc, respectively, through the entire operating frequency band.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: The Journal of Korean Institute of Electromagnetic Engineering and Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
