Abstract
Проанализирована роль декоративно-отделочных, облицовочных материалов и покрытий полов в формировании опасных факторов пожара (ОФП). Проведены расчеты распространения ОФП в модельном помещении с учетом вклада облицовочного материала стен и потолка. Показана возможность применения рассмотренного подхода для моделирования условий (стандартных и нестандартных) испытаний строительных материалов и конструкций на пожарную опасность (например, фасадных систем) и гибкого нормирования при использовании декоративно-отделочных, облицовочных материалов и покрытий полов в зданиях и сооружениях.Article presents the study of the possibility to describe thermal decomposition and thermal oxidation processes of fire load finishing materials by means of the kinetic parameters. These parameters are defined by results of termogravimetric analysis for modeling the dynamics of fire development. Nowadays the problem of modeling the distribution of hazardous fire factors (HFF) in buildings and constructions has wide practical application, however techniques of HFF modeling do not take into account as fire load finishing and facing materials of building and construction premises in development of a fire, so they are not considered at an estimation of safe evacuation of people from buildings and constructions as well as at calculation of fire risk, too. When describing a seat of fire there are used fire hazard indicators having essential uncertainty according to the technical literature sources and experimental data while formation should be based on the possibility of their thermodestruction and thermooxidation under the influence of heat loads of various intensity. At the same time, the speed of the specified processes should be interconnected with values of heat loads. The presented work is of current importance because it is necessary to describe thermodestruction and thermooxidation processes of fire load material at modeling the dynamics of HFF distribution in buildings and constructions by means of kinetic parameters received as the results of thermogravimetric analysis. On the example of calcium silicate and wood composition there are carried out calculations of HFF distribution in a test premise taking into account the contribution of wall and ceiling facing material. There is shown the prevailing, in comparison with a seat of fire, contribution of wall and ceiling facing material to HFF formation at its initial stage which is especially important from the point of view of ensuring safe evacuation of people at fire in buildings and constructions. On the basis of the conducted analysis of research results there are developed proposals for applying the considered approach to model conditions for (standard and non-standard) tests of building materials and structures for fire hazard (for example, front systems) and flexible rationing of use of decorative - finishing and facing materials as well as floor coverings in buildings and structures.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.