Zr-based Metal-organic Frameworks Research Articles

Bifunctional enzyme-mimicking metal-organic frameworks for sensitive acetylcholine analysis

The development of nanomaterials with multi-enzyme-like activity is crucial for addressing challenges in multi-enzyme-based biosensing systems, including cross-talk between different enzymes and the complexities and costs associated with detection. In this study, Pt nanoparticles (Pt NPs) were successfully supported on a Zr-based metal-organic framework (MOF-808) to create a composite catalyst named MOF-808/Pt NPs. This composite catalyst effectively mimics the functions of acetylcholinesterase (AChE) and peroxidase (POD). Leveraging this capability, we replaced AChE and POD with MOF-808/Pt NPs and constructed a biosensor for sensitive detection of acetylcholine (ACh). The MOF-808/Pt NPs catalyze the hydrolysis of ACh, resulting in the production of acetic acid. The subsequent reduction in pH value further enhances the POD-like activity of the MOFs, enabling signal amplification through the oxidation of a colorimetric substrate. This biosensor capitalizes on pH variations during the reaction to modulate the different enzyme-like activities of the MOFs, simplifying the detection process and eliminating cross-talk between different enzymes. The developed biosensor holds great promise for clinical diagnostic analysis and offers significant application value in the field.

Preparation of Zr-MOF/Poly(hexamethylenediamine-tannic acid)/Attapulgite for efficient Cr(VI) removal

In this study, attapulgite (ATP) was modified by Zr-based metal organic framework (UiO-66-NH2) and poly(hexamethylenediamine-tannic acid) (HTA), an amino material named UiO-66-NH2/HTA/ATP (UHA) was prepared to efficiently remove Cr(VI). The morphology and structure of UHA were analyzed through various characterization methods. The conditions and influencing factors of UHA preparation and Cr(VI) adsorption were studied. The material had a maximum adsorption capacity of 270.3 mg/g for Cr(VI) when pH was 2.0, temperature was 298 K, adsorption time was 300 min, and ionic strength was 0.01 mol/L, which was obtained by the Langmuir fitting model. The adsorption process conforms to the pseudo-second-order kinetic and Langmuir isothermal models, indicating that the adsorption process is mainly based on the chemical adsorption of monolayers. X-ray photoelectron spectroscopy analysis shows that UHA mainly removes Cr(VI) by hydrogen bonding, electrostatic attraction, reduction, and complexation. Thermodynamic investigation suggested a disordered, endothermic and spontaneous adsorption process. After UHA treatment, the simulated wastewater containing Cr(VI) met the discharge standard, and the results of cycling experiments showed that UHA has good renewable performance and offers potential prospects for Cr(VI) removal in water.

Atomically Contacted Cs3Bi2Br9 QDs@UiO-66 Composite for Photocatalytic CO2 Reduction.

Metal halide perovskite quantum dots (QDs) are widely studied in the field of photocatalytic CO2 due to their strong light absorption and long carrier migration length. However, it can not exhibit high catalytic performance because of the radiative recombination and the lack of effective catalytic sites. Metal organic frameworks (MOFs) encapsulated QDs can not only solve the aforementioned problems, but also maintain their own unique characteristics with ultra-high specific surfaces area and abundant metal sites. In this work, lead-free bismuth-based halide perovskite QDs are encapsulated into Zr-based MOF (UiO-66), which combines the advantages with high power conversion efficiency of QDs and the high surface area and porosity of UiO-66. In addition, benefiting from the close contact between the Cs3Bi2Br9 QDs and the UiO-66 enables the photogenerated electrons in the QDs to be rapidly transferred to the MOF. As a result, the Cs3Bi2Br9@UiO-66 composite exhibits a higher yield for photocatalytic CO2 reduction than that of the prepared large-sized composite of Cs3Bi2Br9 and UiO-66.

A Porphyrinic Metal-Organic Framework with Cooperative Adsorption Domains for PFAS Removal from Water.

The removal of toxic poly- and perfluoroalkyl substances (PFAS) as persistent pollutants from wastewater is imperative but challenging for water remediation. Many adsorbents including activated carbon, biochar, and clay minerals have been investigated for PFAS removal, but most of these materials are faced with high cost or/and low efficiency. The use of metal-organic frameworks (MOFs) as sorbents is attractive for efficient removal of PFAS due to their tailor-made structures and high surface areas. Herein, we synthesized, characterized a water stable Zr-based porphyrinic MOF (PCN-224) with cooperative adsorption domains, and demonstrated its excellent capture performance toward perfluorooctane sulfonate (PFOS), perfluorohexane sulfonate (PFHxS) and perfluorobutane sulfonate (PFBS). PCN-224 has maximum uptake capacities of 963, 517, and 395 mg g-1 for PFOS, PFHxS, and PFBS, respectively, which are much higher than that of granular activated carbon. Moreover, coexistent anions (Cl-, SO4 2-) and humic acid have negligible effects on PFOS adsorption. The excellent adsorption performance of PCN-224 toward PFOS is due to the orthogonal cationic channel pores with a diameter of 1.9 nm, the hydrophobic porphyrin units, and the Zr6 clusters with acidic sites. PCN-224 can be readily regenerated and reused. This work highlights the potential of MOFs with multiple adsorption domains for water remediation.

Atomically Precise Single-Site Catalysts via Exsolution in a Polyoxometalate-Metal-Organic-Framework Architecture.

Single-site catalysts (SSCs) achieve a high catalytic performance through atomically dispersed active sites. A challenge facing the development of SSCs is aggregation of active catalytic species. Reducing the loading of these sites to very low levels is a common strategy to mitigate aggregation and sintering; however, this limits the tools that can be used to characterize the SSCs. Here we report a sintering-resistant SSC with high loading that is achieved by incorporating Anderson-Evans polyoxometalate clusters (POMs, MMo6O24, M = Rh/Pt) within NU-1000, a Zr-based metal-organic framework (MOF). The dual confinement provided by isolating the active site within the POM, then isolating the POMs within the MOF, facilitates the formation of isolated noble metal sites with low coordination numbers via exsolution from the POM during activation. The high loading (up to 3.2 wt %) that can be achieved without sintering allowed the local structure transformation in the POM cluster and the surrounding MOF to be evaluated using in situ X-ray scattering with pair distribution function (PDF) analysis. Notably, the Rh/Pt···Mo distance in the active catalyst is shorter than the M···M bond lengths in the respective bulk metals. Models of the active cluster structure were identified based on the PDF data with complementary computation and X-ray absorption spectroscopy analysis.

Ultrasensitive electrochemical sensing platform based on Zr-based MOF embellished single-wall carbon nanotube networks for trace analysis of methyl parathion

In this work, a novel electrochemical sensor was designed based on Zr-based metal–organic framework (UIO-66) nanoparticles embellished single-wall carbon nanotube networks (SCN) for the detection of methyl parathion (MP). The synergistic combination of SCN and UIO-66 nanoparticles could fully exert each advantage to boost the MP electrochemical sensing analysis performance. SCN with one-dimensional hollow nanostructures formed three-dimensional interconnected carbon conductive networks, which possessed excellent conductive properties and acceptable specific surface area, enabling efficient transport of electrons and ions. UIO-66 nanoparticles with Zr-OH groups contributes and porous structure to the good affinity for phosphate groups on MP molecules, which enhanced the selective recognition and enrichment capability of sensing electrode towards MP. Under the multifunctional integration of SCN and UIO-66 nanoparticles, the SCN@UIO-66/GCE sensor could present satisfactory MP electrochemical detection performance (LOD: 8.05 nM, linear MP concentration range: 0.01–10 μM). The satisfactory practical property was realized at the SCN@UIO-66/GCE sensor with satisfactory recovery rates of 98.28–101.95 % and low RSD of 1.23–3.01 % for the electrochemical detection of MP in orange juice and lettuce samples.

The cooperative performance of iodo and copper in a Zr-based UiO-67 metal-organic framework for highly selective photocatalytic CO2 reduction to methanol

Photocatalytic CO2 reduction (PCR) to fuels using metal-organic frameworks (MOFs) offers promising solutions for both enhancing energy supply and mitigating global warming. However, research addressing the selectivity towards MeOH production, the role of CO2 uptake in productivity, and the identification of intermediates remains limited. Herein, we present an iodo/copper functionalization strategy for the Zr-based UiO-67 MOF. The resulting bifunctional Cu/I2-Zr-BPDC/BPyDC exhibited remarkable selectivity in light-driven CO2 reduction to MeOH, revealing the first investigation of halogen bonding's effect on PCR. Crucially, Cu/I2-Zr-BPDC/BPyDC surpassed not only pristine Zr-BPyDC, I2-Zr-BPDC, and Cu-Zr-BPyDC, but also boasted the best catalytic performance among reported MOFs. Furthermore, Cu/I2-Zr-BPDC/BPyDC demonstrated a CO2 uptake capacity of 48.6 mg g−1, 1.7 times greater than non-modified Zr-BPyDC, suggesting a direct correlation between CO2 adsorption efficiency and CO2 conversion. In addition to assigning CuII ↔ CuI catalytic cycle, collaborative performance of I and Cu functions in CO2 activation was traced by infrared spectra that elucidate the CI…OCO interaction and Cu…CO2/CuCO2H complex formation. This work provides valuable insights for engineering selective and high-performance PCR catalyst through the rational incorporation of functionalities within MOFs.

Zr-Based MOF-545 Metal-Organic Framework Loaded with Highly Dispersed Small Size Ni Nanoparticles for CO2 Methanation.

We report the use of Zr-based metal-organic frameworks (MOFs) MOF-545 and MOF-545(Cu) as supports to prepare catalysts with uniformly and highly dispersed Ni nanoparticles (NPs) for CO2 hydrogenation into CH4. In the first step, we studied the MOF support under catalytic conditions using operando diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy, ex situ characterizations (PXRD, XPS, TEM, and EDX-element mapping), and DFT calculations. We showed that the high-temperature conditions undoubtedly confer a potential for catalytic functionality to the solids toward CH4 production, while no role of the Cu could be evidenced. The MOF was shown to be transformed into a catalytically active material, amorphized but still structured with dehydroxylated Zr-oxoclusters, in line with DFT calculations. In the second step, Ni@MOF-545 catalysts were prepared using either impregnation (IM) or double solvent (DS) methods, followed by a dry reduction (R) route under H2 to immobilize Ni NPs. The highest catalytic activity was obtained with the Ni@MOF-545 DS R catalyst (595 mmolCH4 gNi-1 h-1) with 100% CH4 selectivity and 60% CO2 conversion after ∼3 h. The higher catalytic activity of Ni@MOF-545 DS R is a result of much smaller (∼5 nm) and better dispersed Ni NPs than in the IM sample (20-40 nm), the latter exhibiting sintering. The advantages of the encapsulation of Ni NPs by the DS method and of the use of a MOF-545-based support are discussed, highlighting the interest of designing yet-unexplored Zr-based MOFs loaded with Ni NPs for CO2 hydrogenation.

Design of a dual-mode ratiometric fluorescent probe via MOF-on-MOF strategy for Al (III) and pH detection

BackgroundThe construction of ratiometric fluorescent MOF sensors with integrated self-calibration and dual-channel detection can efficiently overcome the deficiencies of single-signal sensing. In this regard, the rational design of structurally functionalized MOFs is paramount for enhancing their performance in ratiometric fluorescent sensors. Lately, the concept of MOF-on-MOF design has garnered notable interest as a potential strategy for regulating the structural parameters of MOFs by integrating two or more distinct MOF types. Great efforts have been dedicated to exploring new MOF-on-MOF hybrids and developing their applications in diverse fields. Even so, these materials are still in the stage of advancement in the sensing field. ResultsHerein, a Zr-based metal-organic framework anchored on a rare-earth metal-organic framework (UiO-66(OH)2@Y-TCPP) was prepared for the ratiometric fluorescence detection toward Al (III) and pH. In this probe, the UiO-66(OH)2 featured hydroxyl active sites for Al (III), leading to a significant enhancement in fluorescence intensity upon the addition of Al (III), while the signal emitted by the red-emitting Y-TCPP, serving as the reference, remained constant. UiO-66(OH)2@Y-TCPP exhibited excellent selectivity for Al (III) sensing with a wider linear range of 0.1–1000 μM, and a lower detection limit of 0.06 μM. This probe has also been utilized for the quantitative determination of Al (III) in hydrotalcite chewable tablets with satisfactory results. In addition, the probe realized ratiometric pH sensing in the range of 7–13 using UiO-66(OH)2 as an interior reference. The paper-based probe strip was developed for visual pH sensing. By installing color recognition and processing software on a smartphone, real-time and convenient pH sensing could be achieved. SignificanceThis is the first ratiometric fluorescent sensor for Al (III) and pH detection based on a MOF-on-MOF composite probe, which yields two different response modes. The detection results of Al (III) in hydrotalcite chewable tables and smartphone imaging for pH test paper demonstrate the practicability of the probe. This work opens up a new outlook on constructing a multi-functional application platform with substantial potential for employment in environmental and biological analysis tasks.

Interior and Exterior Surface Modification of Zr-Based Metal-Organic Frameworks for Trace Benzene Removal.

The emission of volatile organic compounds (VOCs) significantly contributes to air pollution and poses a serious threat to human health. Benzene, one of the most toxic VOCs, is difficult for the human body to metabolize and is classified as a Group 1 carcinogen. The development of efficient adsorbents for removing trace amounts of benzene from ambient air is thus of great importance. In this work, we studied the benzene adsorption properties of four Zr-based metal-organic frameworks (Zr-MOFs) through static volumetric and dynamic breakthrough experiments. Two previously reported Zr-MOFs, BUT-12 and STA-26, were prepared with a tritopic carboxylic acid ligand (H3L1) functionalized with three methyl groups, and STA-26 is a 2-fold interpenetrated network of BUT-12. Two new isoreticular Zr-MOFs, BUT-12-Et and STA-26-Et, were synthesized using a similar ligand, H3L2, where the methyl groups are replaced with ethyl groups. There are mesopores in BUT-12 and BUT-12-Et and micropores in STA-26 and STA-26-Et. The four Zr-MOFs all showed high stability in liquid water and acidic aqueous solutions. The microporous STA-26 and STA-26-Et showed much higher benzene uptakes than mesoporous BUT-12 and BUT-12-Et at room temperature under low pressures. Particularly, the benzene adsorption capacity of STA-26-Et was high up to 2.21 mmol/g at P/P0 = 0.001 (P0 = 12.78 kPa), higher than those of the other three Zr-MOFs and most reported solid adsorbents. Breakthrough experiments confirmed that STA-26-Et could effectively capture trace benzene (10 ppm) from dry air; however, its benzene capture capacity was reduced by 90% under humid conditions (RH = 50%). Coating of the crystals of STA-26-Et with polydimethylsiloxane (PDMS) increased the hydrophobicity of the exterior MOF surfaces, leading to a more than 2-fold improvement in its benzene capture capacity in the breakthrough experiment under humid condition. PDMS coating of STA-26-Et likely slowed down the water adsorption process, and thus, the adsorbent afforded more efficient capture of benzene. This work demonstrates that modifying both the interior and exterior surfaces of MOFs can effectively enhance their performance in capturing trace benzene from ambient air, even under humid conditions. This finding is meaningful for the development of new adsorbents for effective air purification applications.

Preparation of PDMS and PDMS-UiO-66 oxygen-rich membranes and modules for membrane-aerated biofilm reactors.

A membrane-aerated biofilm reactor (MABR) combines membrane technology with biofilm processes and has unique advantages in the treatment of organic wastewater and volatile wastewater. The common membranes for MABR systems usually have relatively uneven pore structures and low bubble point pressure, resulting in unsatisfactory O2 utilization and wastewater treatment efficiency. In this work, polydimethylsiloxane (PDMS) and UiO-66 (a Zr-based metal organic framework) were coated on the surface of a commercial polypropylene (PP) hollow fiber membrane to prepare oxygen-rich MABR membranes and modules, which showed an attractive O2 utilization rate and wastewater treatment efficiency. The bubble points of the PDMS and PDMS-UiO-66 membranes were significantly higher than those of the PP membranes, and the PDMS-UiO-66 membranes had better oxygen enrichment capacity and biological affinity. The optimal PDMS-UiO-66 membrane modules had an O2 permeance of 31.65 GPU (1 GPU = 3.35 × 10-10 mol m-2 s-1 Pa-1), with O2/N2 selectivity of 2.21. The membrane hanging effect and processing capacity for domestic sewage were greatly improved. This study may provide insights and guidelines to fabricate porous mixed matrix membranes and modules in the industry for MABR. The developed products are expected to be applied in the actual separation process.

Construction of oxime-functionalized PCN-222 based on the directed molecular structure design for recovering uranium from wastewater.

The directed construction of productive adsorbents is essential to avoid damaging human health from the harmful radioactive and toxic U(VI)-containing wastewater. Herein, a sort of Zr-based metal organic framework (MOF) called PCN-222 was synthesized and oxime functionalized based on directed molecular structure design to synthesize an efficient adsorbent with antimicrobial activity, named PCN-222-OM, for recovering U(VI) from wastewater. PCN-222-OM unfolded splendid adsorption capacity (403.4 mg·g-1) at pH = 6.0 because of abundant holey structure and mighty chelation for oxime groups with U(VI) ions. PCN-222-OM also exhibited outstanding selectivity and reusability during the adsorption. The XPS spectra authenticated the -NH and oxime groups which revealed a momentous function. Concurrently, PCN-222-OM also possessed good antimicrobial activity, antibiofouling activity, and environmental safety; adequately decreased detrimental repercussions about bacteria and Halamphora on adsorption capacity; and met non-toxic and non-hazardous requirements for the application. The splendid antimicrobial activity and antibiofouling activity perhaps arose from the Zr6(μ3-O)4(μ3-OH)4(H2O)4(OH)4 clusters and rich functional groups within PCN-222-OM. Originally proposed PCN-222-OM was one potentially propitious material to recover U(VI) in wastewater on account of outstanding adsorption capacity, antimicrobial activity, antibiofouling activity, and environmental safety, meanwhile providing a newfangled conception on the construction of peculiar efficient adsorbent.

A modulator-induced defect strategy to construct different mesopore ratios Zr-based metal-organic frameworks for ultrafast adsorption of heterocyclic aromatic amines

The platform of isostructural crystalline metal-organic frameworks (MOFs) with structural defects and additional pores is an emerging technology for rapidly removing hazardous small molecules. Herein, this paper designed a series of Zr-based MOFs (UiO-66) with different mesopore ratios by inducing linker/cluster missing through monocarboxylic acid modulators; besides their adsorption capacity and mechanism for heterocyclic aromatic amines (HAAs) were investigated. The UiO-66 defected with lauric acid (UiO-66-12A) showed the best adsorption performance and its adsorption capacity and rate for HAAs were 1.25–5.63 and 1.74–5.82 times higher than UiO-66, respectively. The zeta potentials of adsorbents in the presence of HAAs aqueous solutions underscore the pivotal role of electrostatic interactions during adsorption. Fourier Transform Infrared (FT-IR) and X-ray photoelectron spectroscopy (XPS) demonstrated that π-π stacking, coordination and hydrogen bonding interactions were also critical factors in promoting adsorption. Moreover, simulation calculations revealed that UiO-66 with missing clusters can provide more active sites and stronger interactions. These findings provided a novel and feasible strategy for the rapid removal of hazardous small molecules from complex food environments, which could improve the adsorption capacity and convenient processes of MOFs through building appropriate inherent microporous structures. The comprehensive and systematic understanding of the adsorption mechanism in this paper is conducive to the future advancement of nanomaterials.

Single-Chain Conjugated Polymer Guests Confined inside Metal-Organic Frameworks (MOFs): Boosting the Detection and Degradation of a Sulfur Mustard Simulant.

Real-time detection and effective degradation of toxic gases have attracted considerable attention in environmental monitoring and human health. Here, we demonstrate a solvent-assisted dynamic assembly strategy to strongly enhance the detection and degradation performance for 2-chloroethyl ethyl sulfide (CEES, as a sulfur mustard simulant) via confinement of a conjugated polymer in metal-organic frameworks (MOFs). The conjugated polymer poly(9,9-di-n-octylfluorene-altbenzothiadiazole) (F8BT) is infiltrated into one-dimensional nanochannels of the Zr-based topological MOF NU-1000 in a single-chain manner, which is caused by the nanoconfinement effect and the steric hindrance between 9,9-dioctylfluorene units and benzothiadiazole units. The obtained F8BT⊂NU-1000 composites provide a high specific surface area and abundant active sites. Based on the cooperative effect of F8BT and NU-1000, rapid and sensitive detection of CEES has been achieved. Moreover, the F8BT⊂NU-1000 composites can selectively oxidize CEES into 2-chloroethyl ethyl sulfoxide (CEESO) under mild photooxidation conditions. Overall, this study opens a new avenue for the fabrication of conjugated polymer/MOF hybrid materials that show great potential for the sensitive detection and effective removal of hazardous chemicals.

MOF@COF Nanocapsules Enhance Soft Tissue Sarcoma Treatment: Synergistic Effects of Photodynamic Therapy and PARP Inhibition on Tumor Growth Suppression and Immune Response Activation.

Soft tissue sarcomas (STS) are highly malignant tumors with limited treatment options owing to their heterogeneity and resistance to conventional therapies. Photodynamic therapy (PDT) and poly-ADP-ribose polymerase (PARP) inhibitors (PARPi) have shown potential for STS treatment, with PDT being effective for sarcomas located on the extremities and body surface and PARPi targeting defects in homologous recombination repair. To address the limitations of PDT and harness the potential of PARPi, herein, a novel therapeutic approach for STS treatment combining nanocapsules bearing integrated metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), i.e., MOF@COF, with PDT and PARPi is proposed. Nanocapsules are designed, referred to as ZTN@COF@poloxamer, which contain a Zr-based MOF and tetrakis (4-carbethoxyphenyl) porphyrin as a photosensitizer, are coated with a COF to improve the sensitizing properties, and are loaded with niraparib to inhibit DNA repair. Experiments demonstrate that this new nanocapsules treatment significantly inhibits STS growth, promotes tumor cell apoptosis, exhibits high antitumor activity with minimal side effects, activates the immune response of the tumor, and inhibits lung metastasis in vivo. Therefore, MOF@COF nanocapsules combined with PARPi offer a promising approach for STS treatment, with the potential to enhance the efficacy of PDT and prevent tumor recurrence.

A Controlled Release Aptasensor Utilizing AIE-Active MOFs as High-Efficiency ECL Nanoprobe for the Sensitive Detection of Adenosine Triphosphate.

Improving the sensitivity in electrochemiluminescence (ECL) detection systems necessitates the integration of robust ECL luminophores and efficient signal transduction. In this study, we report a novel ECL nanoprobe (Zr-MOF) that exhibits strong and stable emission by incorporating aggregation-induced emission ligands into Zr-based metal-organic frameworks (MOFs). Meanwhile, we designed a high-performance signal modulator through the implementation of a well-designed controlled release system with a self-on/off function. ZnS quantum dots (QDs) encapsulated within the cavities of aminated mesoporous silica nanoparticles (NH2-SiO2) serve as the ECL quenchers, while adenosine triphosphate (ATP) aptamers adsorbed on the surface of NH2-SiO2 through electrostatic interaction act as "gatekeepers." Based on the target-triggered ECL resonance energy transfer between Zr-MOF and ZnS QDs, we establish a coreactant-free ECL aptasensor for the sensitive detection of ATP, achieving an impressive low detection limit of 0.033 nM. This study not only demonstrates the successful combination of ECL with controlled release strategies but also opens new avenues for developing highly efficient MOFs-based ECL systems.

Enhanced Catalytic Activity through the Variation of Hierarchical Porosity in a Zr-Based Metal–Organic Framework

Enhanced Catalytic Activity through the Variation of Hierarchical Porosity in a Zr-Based Metal–Organic Framework

Probing oxygen exchange between UiO-66(Zr) MOF and water using 17 O solid-state NMR.

The Zr-based Metal Organic Framework (MOF) UiO-66(Zr) is widely employed owing to its good thermal and chemical stabilities. Although the long-range structure of this MOF is preserved in the presence of water during several days, little is known about the formation of defects, which cannot be detected using diffraction techniques. We apply here 17 O solid-state NMR spectroscopy at 18.8 T to investigate the reactivity of UiO-66, through the exchange of oxygen atoms between the different sites of the MOF and water. For that purpose, we have selectively enriched in 17 O isotope the carboxylate groups of UiO-66(Zr) by using it with 17 O-labeled terephthalic acid prepared using mechanochemistry. In the presence of water at 50 °C and a following dehydration at 150 °C, we observe an overall exchange of O atoms between COO- and μ3 -O2- sites. Furthermore, we demonstrate that the three distinct oxygen sites, μ3 -OH, μ3 -O2- and COO- , of UiO-66(Zr) MOF can be enriched in 17 O isotope by post-synthetic hydrothermal treatment in the presence of 17 O-enriched water. These results demonstrate the lability of Zr-O bonds and the reactivity of UiO-66(Zr) with water.

Porous Composite‐Mediated Bimetallic Cluster POMs/Zr‐MOF for Catalytic Transfer Hydrogenation of Biomass‐Derived Aldehydes and Ketones

AbstractSynergistic catalytic effects and metal node modulation are pivotal to the performance of multifunctional catalysts.We present a versatile strategy for constructing bimetallic M1M2 cluster catalysts (polyoxometalates (POMs)/Zr‐based metal‐organic frameworks (Zr‐MOF); M1 = Zr; M2 = W, V, Mo) by a microwave‐assisted in‐situ precoordination‐postmodification approach, which consisted of the grafting of POM single clusters onto Zr–O clusters of hierarchical porous composites (defective Zr‐MOF (HUiO‐66x)) and the modulation of metal nodes in Zr‐MOF. Hierarchical porosity and double active centers in the POMs/Zr‐MOF result in greater accessibility to catalytic sites and adjustable acid–base properties, thus providing opportunities for the catalytic transfer hydrogenation of biomass‐derived aldehydes/ketones. The synergistic acid–base couple sites (W6+–O2−–Zr4+) not only bridge hydrogen donors into the reaction system but also promote the dissociation of α‐C(sp3)‐H from isopropanol and subsequent hydrogen transfer to the activated carbonyl in furfural. Enhanced substrate adsorption and decreased activation barrier of the rate‐determining step are keys for the direct hydrogen transfer from carbonyl compounds to near‐quantitative corresponding alcohols via an eight‐membered‐ring transition state to achieving unprecedented low‐temperature catalytic performance over bimetallic Zr–W clusters. The proposed general method of bimetallic cluster catalysts reveals the roles of accessible metal modulation and synergistic catalytic centers toward specific catalysis.

Solid-state 13C-NMR spectroscopic determination of side-chain mobilities in zirconium-based metal–organic frameworks

Abstract. Porous interpenetrated zirconium–organic frameworks (PIZOFs) are a class of Zr-based metal–organic frameworks (MOFs) which are composed of long, rod-like dicarboxylate linkers and Zr6O4(OH)4(O2C)12 nodes. Long oligoethylene glycol or aliphatic side chains are covalently attached to the linker molecules in the cases of PIZOF-10 and PIZOF-11, respectively. These side chains are supposedly highly mobile, thus mimicking a solvent environment. It is anticipated that such MOFs could be used as a solid catalyst – the MOF – with pore systems showing properties similar to a liquid reaction medium. To quantify the side-chain mobility, here we have applied different 1D and 2D NMR solid-state spectroscopic techniques like cross-polarization (CP) and dipolar-coupling chemical-shift correlation (DIPSHIFT) studies. The rather high 1H-13C CP efficiency observed for the CH2 groups of the side chains indicates that the long side chains are unexpectedly immobile or at least that their motions are strongly anisotropic. More detailed information about the mobility of the side chains was then obtained from DIPSHIFT experiments. Analytical expressions for elaborate data analysis are derived. These expressions are used to correlate order parameters and to slow motional rates with signals in indirect spectral dimensions, thus enabling the quantification of order parameters for the CH2 groups. The ends of the chains are rather mobile, whereas the carbon atoms close to the linker are more spatially restricted in mobility.