Zinc Sulfide Research Articles

Evaluating the photocatalytic properties of zinc sulfide and zinc indium sulfide microspheres: A comparative approach

Evaluating the photocatalytic properties of zinc sulfide and zinc indium sulfide microspheres: A comparative approach

Application of Mechano-Luminescence-Optoelectronic Composites for Delamination Detection in Fiber Reinforced Polymer Composites

Abstract Fiber reinforced polymer (FRP) composites have attracted significant attention from the aerospace industry in recent years. FRP composites have the advantage of being light weight, high strength and resistant to corrosion making them an attractive option for various applications in the aerospace industry. However, FRP composites are prone to delamination which can eventually compromise structural integrity leading to sudden failure. An effective damage detection methodology is therefore necessary to monitor delamination in structures. In this study, mechano-luminescence-optoelectronic (MLO) composites were integrated with FRP composites to create MLO-FRP test coupons for delamination detection. The MLO composites were prepared by coupling a Poly(3-hexylthiophene) (P3HT)-based sensor with a copper dopped zinc sulfide (ZnS:Cu) composite. MLO composites were attached to the surface of FRP composites to create MLO-FRP test coupons. The MLO-FRP test coupon was mounted on a 3-point bending load frame and subjected to cyclic loading and unloadings at various displacements with the first displacement starting from zero to 5 mm. The second displacement starting from zero to 6 mm and so on. A direct current (DC) voltage was recorded from the MLO composites at a constant loading rate to validate its DC-based strain sensing capability. Other parameters such as applied load, strain energy release rate and strain were also obtained with the aim of tracking delamination propagation in FRP composites. Results showed MLO composites were sensitive to delamination propagation highlighting their potential to be used in structures for health monitoring.

Review and Outlook of Zinc Sulfide Nanostructures for Supercapacitors

Review and Outlook of Zinc Sulfide Nanostructures for Supercapacitors

Trace Selenium Doping for Improving the Reaction Kinetics of ZnS Cathode for Aqueous Zn-S Batteries.

Aqueous Zinc-sulfur (Zn-S) batteries are promising for the field of energy storage due to their low cost, high theoretical capacity, and safety. However, the large volume expansion and the inherently poor conductivity of sulfur would result in electrode cracking and sluggish reaction kinetics, limiting the practical application of Zn-S batteries. Herein, commercial zinc sulfide (ZnS) is employed instead of S as cathode and proposed a doping modification strategy to solve the above problems. The designed ZnS0.93Se0.07 cathode shows good cycle stability and much-improved reaction kinetics, which is due to the smaller bandgap of ZnS0.93Se0.07 (1.40eV) compared to ZnS (1.86eV). As a result, the obtained ZnS0.93Se0.07 cathode exhibits a high specific capacity of 552 mAh g-1 (1672.6 mAh g-1 based on S) at 0.1 A g-1 and 330 mAh g-1 (1000 mAh g-1 based on S) at 2 A g-1. Moreover, the ZnS0.93Se0.07 cathode can provide a high areal capacity of 3.8 mAh cm-2 at a high mass loading of 10mg cm-2 and limited electrolyte (4µL mg-1). This work provides a simple and effective cathode modification strategy, which is conducive to promoting the practical application of Zn-S batteries.

Properties investigation of ZnS/porous silicon heterojunction for gas sensing

In this work, the gas sensing properties of ZnS/Porous silicon heterostructures have been investigated. . Zinc sulfide(ZnS) with high gas sensing performance is successfully synthesized over the Porous silicon substrate by the spray pyrolysis method. The properties of the as-prepared samples were characterized X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform spectrum (FTIR) and optical properties. The results reveal that the properties of the ZnS/Porous silicon heterostructures enhanced when the when the ZnS concentration is increased. The performance ZnS/Porous silicon as a gas-sensing show that the maximum sensitivity is found to be 5.11 at ZnS concentration of 0.5 M and etching time of 15 min compared to the other sensitivities. The ZnS-PSi heterojunction based gas sensor may be used for UV-light photo-detectors due to a valuable properties such as high sensitivity and fast response.

Unleashing Ultrahigh Capacity and Lasting Stability: Aqueous Zinc‐Sulfur Batteries

AbstractDespite of multifarious dominance of sulfur‐based batteries, polysulfide‐shuttling and use of high‐cost organic electrolytes with flammability risks hinder their applicability as commercial devices. Herein a polysulfide‐free aqueous zinc‐sulfur (Zn─S) rechargeable battery is explored, which offers a low‐cost and environmentally friendly energy storage system being Zn and Sulfur (S) highly abundant with high theoretical capacity. However, the stability of Zn anode is quite challenging due to dendritic growth and corrosion leading to the capacity decay. This work showcases the utilization of ethylene glycol (EG) and iodine (I2) as an electrolyte additive in aqueous zinc acetate [Zn(OAc)2] electrolyte for stabilizing the Zn─S battery performance. EG as an additive is able to mitigate the corrosion rate of the Zn electrode by 15 times which is supported by molecular dynamics simulation. The assembled Zn─S battery delivered an outstanding capacity of 1210 mA h g−1 at 0.1 C with a 91% capacity retention even after 250 cycles, along with remarkable reversible prolonged cycling stability of 3000 cycles at 1 C, with 64.5% capacity retention. More importantly, in situ electrochemical Raman spectroscopy is utilized to monitor the real‐time formation of zinc sulfide (ZnS) as a single discharge product and simultaneously debunking the polysulfide shuttling in the system which is further supported by XPS, UV‐Vis and IR spectroscopy.

Imaging of low Z masked with high Z (Pb, U) materials using 14 MeV neutron

An experimental study has been performed using 14 MeV neutrons for imaging of low Z material (particularly composed of C, H, O elements) masked with thick layers of dense and high Z materials. The experimental setup consists of a D-T neutron generator, a metallic collimator and an imaging system. The imaging system is designed with a polypropylene zinc sulphide scintillator screen integrated with a lens coupled 16-bit ICCD camera. Imaging capability of the system was investigated using iron test samples with holes and line pair features. The minimum hole size of 2 mm could be imaged at a contrast of 36% and a line of 2 mm width visible at a contrast of 24% indicating the system's resolution of ∼ mm. Low Z samples such as water (H2O) and polyethylene (C2H2) n placed behind thick layers of Pb (40 mm) and Uranium (35 mm), were imaged successfully. These images reveal the system's ability towards low Z material imaging in the presence of heavier metals. Good contrast images acquired at a lower neutron yield of ∼ 5 × 108 n/sec of D-T neutron generator has provided a possibility to realise fast neutron imaging having moderate resolution (∼ mm) with a smaller footprint and an economical system design for field applications.

Influence of the Phosphor Layer Composition on Flexible Electroluminescent Device Performance

Electroluminescence (EL) is an innovative technology in the lighting area. EL devices’ main structure consists of a phosphor layer sandwiched between two electrodes. In this work, several alternating-current EL devices were developed by applying a set of sequential layers with combinations of in-house prepared inks and a commercially available ink as the phosphor layer. A flexible polyester textile substrate was functionalized with the inks by spray coating, after knife coating an interfacial layer directly on the surface. A thorough study was carried out on the phosphor layer composition to optimize the EL device performance, more precisely, illuminance intensity and illuminance homogeneity. The developed phosphor layer was composed of zinc sulfide doped with copper (between 30.0 and 38.1 wt%) and diluted by using a diluent at different concentrations (from 28.0 to 35.5 wt%). The best peak illuminance intensity of 61 lux was obtained when the phosphor ink presented a 35.4% ZnS:Cu ratio and was diluted with 33.0% diluent. This study aimed to determine the best formulation of the phosphor layer, which can be highly useful for further developments of EL devices, taking into account different applications in the market.

Radiation shielding properties of heavy-weight concrete and heavy-weight geopolymer concrete incorporating nano-ZnS

The population growth and the subsequent increase in energy demand for buildings require the widespread use of sustainable materials in the construction industry. Therefore, geopolymer concretes (GPC) are expanding with the ability to emit less greenhouse gases (GHG) compared to conventional concrete. In this study, the effect of adding different content of Zinc sulfide nanoparticle (nano-ZnS) 0, 1.5, 3, 4.5, and 6 % by weight of cement on density (ρ), compressive strength, gamma ray radiation protection characteristics, and microstructure based on scanning electron microscope (SEM) is investigated in heavy-weight concrete (HWC) and heavy-weight geopolymer concrete (HGC). The results have shown that nano-ZnS nanoparticles improve the strength and gamma ray shielding properties of HWC and HGC by modifying the microstructure so that by adding the optimal amount of 6 % nano-ZnS, the maximum compressive strength for HWC and HGC was obtained by 57.4 and 41.5 %, respectively. In addition, the highest linear attenuation coefficient (µ)was obtained with the addition of 4.5 % nano-ZnS for HWC and HGC, 12.8 and 8.9 %, respectively.Furthermore, the life cycle assessment (LCA) of the three phases of raw material production, transportation and concrete production has revealed that HGC has emitted 41.5 % less CO2 compared to HWC. In general, HGC in the presence of the optimal amount of nanoparticles has shown a more visible improvement in compressive strength and gamma ray shielding properties. In addition, HGC as an environmentally friendly material, has significantly reduced the emission of CO2.

Toward Sustainable Electroluminescent Devices for Lighting and Sensing

AbstractIn today's rapidly evolving technological landscape, electroluminescent devices have emerged as pivotal components, illuminating a path toward energy‐efficient lighting solutions, advanced displays, and integrated sensing technologies, profoundly impacting sectors ranging from consumer electronics to sustainable urban development. Based in such socio‐scientific‐economic scenario, and in the pursuit of sustainable and environmentally conscious technologies, this work presents a novel approach to the development of a multifunctional electroluminescent (EL) device capable of both efficient lighting and electric field frequency sensing applications. The proposed device integrates a composite based on zinc sulfide co‐doped with copper (ZnS:Cu) phosphor particles and plant‐based UV resin, to achieve enhanced functional properties and reduced environmental impact. The developed anycubic plant‐based UV resin clear (ECOr)/ZnS:Cu inks display viscosity values between 0.5 and 100 Pa.s (ensuring good quality of screen‐prints), and after printing composites exhibit thermal stability up to ≈200 °C; morphological homogeneity, dielectric properties dependent on the ZnS:Cu content (dielectric constant of 12.8 for the sample with 80 wt.% of filler); 30 cd.m2 luminance for the sample with 80 wt.% of ZnS:Cu; and colorimetric electric field frequency sensing capability in the 0–3 kHz range. Thus, this research contributes to the advancement of sustainable technologies that prioritize both multifunctionality and environmental responsibility in the fabrication of electroluminescent devices for lighting and sensing.

Weak alkaline flotation separation of galena from sphalerite with 6-butylamino-1,3,5-triazine-2(1H)-thione-4-thiol sodium

The reduction of lime usage in flotation separation of lead–zinc sulfide ores has an interesting topic for protecting environment and recovering valuable metal minerals. In this study, BN (6-butylamino-1,3,5-triazine-2(1H)-thione-4-thiol sodium) was introduced for the first time as a selective collector for galena flotation. The results of UV spectra, adsorption capacity, zeta potential and in-situ AFM manifested that BN exhibited the selective affinity towards Pb2+ over Zn2+ ions, and preferred to adsorb on galena surface, not on sphalerite. The FTIR and XPS further uncovered that BN assembled on galena via bonding its sulfur atoms with lead ions of galena to form the surface BN-Pb complexes. The micro-flotation findings revealed that BN returned the stronger collecting power and higher selectivity than isobutyl xanthate during flotation separation of galena from sphalerite, and achieved their effective separation at low alkaline conditions (pH ∼ 8.0). This study also offers an enlightenment for the design of chelating collectors suitable for use under weak alkaline conditions.

High peak power passively Q-switched Tm:YAP solid-state laser with Cr2+:ZnSe and Cr2+:ZnS saturable absorber

We experimentally demonstrate a passively Q-switched thulium-doped YAlO3 (Tm:YAP) laser based on the Cr2+:ZnSe (Chromium, Zinc Selenide) and Cr2+:ZnS (Zinc Sulfide) crystals. Wavelength tuning for 1.87 μm, 1.90 μm, and 1.94 μm operations was achieved by employing a birefringent plate. The impact of varying doping concentrations of Cr2+:ZnS crystals and a Cr2+:ZnSe crystal on the laser output was investigated. During the analysis, the passively Q-switched Tm:YAP laser achieved a pulse with the highest peak power of 107.5 kW and the narrowest pulse width of ∼6 ns, utilizing a Cr2+:ZnSe crystal as the saturable absorber (SA) with a modulation depth (ΔR) of 14 %.

Optimized piezoelectric bone regeneration through inhibiting sympathetic nerve-bone interaction

Electrical cues are crucial for osteogenesis. To tackle critical-sized bone defects, piezoelectric materials non-invasively generate electrical stimuli via ultrasonic excitation, imitating natural bone's piezoelectricity. Two-dimensional piezoelectric nanomaterials, with their flexibility and cellular interactions, effectively improve osteogenic outcomes. Yet, the concurrent electrical and injury signals may overly activate sympathetic nerves, causing excessive norepinephrine release, which hinders osteogenic differentiation by targeting mesenchymal stem cells' β2-receptors. Addressing this, we developed a sophisticated drug carrier, encapsulating piezoelectric zinc sulfide (ZnS) in a polydopamine (PDA) coating with the β blocker propranolol (PRO), creating ZnS@PDA-PRO. This nanocarrier generates electrical signals and releases Zn2+ to promote osteogenic differentiation, while PRO mitigates sympathetic nerve inhibition, enhancing the regeneration of critical-sized bone defects.

Sulfuric acid leaching of a complex zinc sulfide concentrate with high copper and lead concentrations under oxygen pressure

ABSTRACT This paper presents the use of an oxygen pressure-based acid leaching process for the selective extraction of basic metals from a complex zinc ore containing high concentrations of lead (6.00%) and copper (2.47%). The effects of leaching temperature, ore particle size distribution, leaching time, liquid-to-solid ratio, and oxygen partial pressure on the leaching efficiencies of zinc and copper were investigated, and the phase transformation behaviour of lead compounds was studied. Under the optimal conditions that is, a particle size of −48/+40 μm, initial sulfuric acid concentration of 150 g/L, liquid-to-solid ratio of 6:1, leaching time of 150 min, leaching temperature of 150°C, and oxygen partial pressure of 0.8 MPa – the leaching efficiencies of zinc, copper, and iron were 98.85%, 82.69%, and 33%, respectively. The leaching residue showed that almost all of the zinc sulfide was dissolved as ZnSO4, and most of the negatively charged bivalent sulfur was converted to zero-valent element sulfur. Through the pressure leaching reaction, galena in the concentrate was converted to lead jarosite (PbFe6(SO4)4(OH)12) and elemental sulfur. The formation of lead jarosite facilitated the removal of a significant portion of iron during leaching, reducing the subsequent purification burden.

Fabrication of Multifunctional Tents Using Canvas Fabric.

Herein, this study was compiled to investigate a suitable solution for the fabrication and development of the multifunctional defense tent from previously reported research. The military always needs to protect their soldiers and equipment from detection. The advancement of infrared detection technology emphasizes the significance of infrared camouflage materials, reducing thermal emissions for various applications. Objects emit infrared radiation detectable by devices, making military targets easily identifiable. Infrared camouflage mitigates detection by lowering an object's infrared radiation, achieved by methods such as reducing surface temperature, which is crucial in designing military tents with infrared (IR) camouflage, considering water repellency and antibacterial features. Water repellency, as well as antimicrobial properties, in army tents is also important as they have to survive in different situations. All these problems should be addressed with the required properties; therefore, the authors try to introduce a new method from which multifunctional tents can be produced through economical, multifunctional, and sustainable materials that have IR protection, water repellency, ultraviolet (UV) protection, air filtration and permeability, and antimicrobial properties. There is still no tent that performs multiple functions at a time, even those functions that do not correlate with each other such as water repellency, IR protection, antimicrobial, and air permeability. So, a multifunctional tent could be the solution to all these problems having all the properties discussed above. In this study based on the literature review, authors concluded a method for the required tent for canvas fabric coated with zinc sulfide (ZnS), graphene oxide (GO), and zinc oxide (ZnO), or these materials should be incorporated in fiber formation because fiber composition has more impact. These multifunctional tents will be very beneficial due to their multifunctions like weather resistance, durability, and long life. These would help the army in their missions by concealing their soldiers and equipment from detection by cameras and providing filtered air inside the tent in case of gases or explosions. The proposed method will help to fulfill the stated and implied needs of customers.

Tuning structure, stability and magnetism in vanadium doped zinc sulfide for spintronic applications: Insights from first-principles and Monte Carlo approaches

This work utilizes a multi-scale computational approach combining first-principles density functional theory (DFT) and Monte Carlo statistical simulations to provide fundamental insights into the impacts of vanadium (V) doping on the structural, electronic, magnetic, and thermodynamic properties of wurtzite zinc sulfide (ZnS). 2 × 2 × 2 ZnS supercells with controlled V doping concentrations from 12.5%–25% substituting zinc sites were constructed. The introduction of V dopants induces systematic expansions in lattice parameters and cell volume, attributed to the larger ionic radius of V2+ than Zn2+, while the average compressibility shows minimal variation. However, V incorporation is found to soften ZnS by over 15% at higher dopant contents, increasing compliance and anisotropy. Stable ferromagnetic spin couplings emerge, mediated by host carriers without precipitating V secondary phases. The band structure develops half-metallic electronic properties with the lifting of spin degeneracy and preferential spin-up band metallicity induced by V-3d and S-3p hybridization effects. This results in 100% spin polarization at the Fermi level. Monte Carlo simulations based on a tight-binding Hamiltonian constructed from maximally localized Wannier functions to accurately calculate the exchange interactions between V spins successfully reproduce the magnetic phase transition behavior. The results confirm high Curie temperatures exceeding 300 K at 25% V, attributable to the significant strengthening of short-range ferromagnetic couplings over antiferromagnetic interactions. The integrated computational approach provides fundamental insights into the microscopic origin of carrier-mediated ferromagnetism in V-doped wurtzite ZnS dilute magnetic semiconductors. The systematic first-principles calculations and statistical mechanics modeling establish clear structure–property relationships linking V doping configurations and concentrations to tuned mechanical response, enhanced stability, electronic structure modifications, spin polarization, and magnetic ordering temperatures in ZnS. The results present design pathways and predictive capabilities to guide experimental efforts toward emerging high-performance magnetic materials for spintronic technologies.

Nanobiostimulant action of trigolic formulated zinc sulfide nanoparticles (ZnS-T NPs) on rice seeds by triggering antioxidant defense network and plant growth specific transcription factors

Under a changing climate, nanotechnological interventions for climate resilience in crops are critical to maintaining food security. Prior research has documented the affirmative response of nano zinc sulfide (nZnS) on physiological traits of fungal-infested rice seeds. Here, we propose an application of trigolic formulated zinc sulfide nanoparticles (ZnS-T NPs) on rice seeds as nanobiostimulant to improve physiological parameters by triggering antioxidative defense system, whose mechanism was investigated at transcriptional level by differential expression of genes in germinated seedlings. Nanopriming of healthy rice seeds with ZnS-T NPs (50 μg/ml), considerably intensified the seed vitality factors, including germination percentage, seedling length, dry weight and overall vigor index. Differential activation of antioxidant enzymes, viz. SOD (35.47%), APX (33.80%) and CAT (45.94%), in ZnS-T NPs treated seedlings reduced the probability of redox imbalance and promoted the vitality of rice seedlings. In gene expression profiling by reverse transcription quantitative real time PCR (qRT-PCR), the notable up-regulation of target antioxidant genes (CuZn SOD, APX and CAT) and plant growth specific genes (CKX and GRF) in ZnS-T NPs treated rice seedlings substantiates their molecular role in stimulating both antioxidant defenses and plant growth mechanisms. The improved physiological quality parameters of ZnS-T NPs treated rice seeds under pot house conditions corresponded well with in vitro findings, which validated the beneficial boosted impact of ZnS-T NPs on rice seed development. Inclusively, the study on ZnS-T NPs offers fresh perspectives into biochemical and molecular reactions of rice, potentially positioning them as nanobiostimulant capable of eliciting broad-spectrum immune and growth-enhancing responses.

Study on Optimization of Deep Purification Process Design of Zinc Oxygen Pressure Acid Leaching Solution

According to the characteristics of high impurity content and complex composition of oxygen pressure leaching (OPL) solution of zinc sulfide concentrate, combined with the quality requirements of large plate electrowinning and automatic plate stripping, the advanced purification process of solution was designed. Through the deep purification process consisting of neutralization indium precipitation and low iron purification, high temperature antimony salt nickel and cobalt removal, copper slag chlorine removal, low temperature zinc powder replacement copper and cadmium removal, fine purification, calcium and magnesium removal, the contents of harmful impurities such as iron, indium, copper, cadmium, nickel, cobalt, fluorine and chlorine in the solution are strictly controlled to ensure that the quality of the deeply purified zinc sulfate solution is qualified and can meet the needs of continuous and stable production. The energy-saving effect of advanced purification process is obvious, and the average DC power consumption per ton of electric zinc is 2880kWh, reaching the advanced level of the same industry in China. The good effect of advanced purification process ensures the successful application of OPL and large plate zinc electrowinning, and improves the technology and equipment level of zinc smelting industry, which has important popularization and application value.

Extraction of internal trapped light from the light emitting devices using ZnS nanomaterial

The extraction of internal light generated in light-emitting devices in an economical way is always challenging. Modern technology demands more and more stable and enhanced performances of devices fabricated in simple and cost-effective processes with low cost of manufacturing. In this paper, we have demonstrated the synthesis of Zinc Sulfide nanomaterial by a facile and cost-effective solvothermal method, and its performance in light extraction application at light-emitting devices is investigated extensively. The simulation result of light extraction performances of ZnS nanomaterial is correlated with the experimental result, which is satisfactory. Experimental performance carried out in 25 mg ZnS nanomaterial thin film placed over the COB-LED light extracts more intense light than other thin films of ZnS nanomaterial. The simulation result of light extraction also suggests the enhancement of light extraction in 25 mg ZnS nanomaterial. The light extraction performance of ZnS nanomaterial thin film is more questing which can be endorsed for practical and industrial applications.

Photocatalytic Degradation of Methylene Blue Dye by Using Different Nanoparticles

Zinc sulfide nanoparticles (NPs) were produced through a straightforward and cost-efficient chemical co-precipitation technique, intended for use in the photocatalytic decomposition of methylene blue (MB) dye, both under ultraviolet and visible light exposure. To evaluate the synthesized nanoparticles, various analytical tools including ultraviolet-visible (UV-Vis) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffractometry (XRD) were employed. The XRD analysis confirmed the cubic symmetry of the synthesized NPs. SEM analysis revealed that the nanoparticles tend to aggregate, forming clusters of nanoparticles. TEM analysis illustrated that the ZnS nanoparticles exhibit a spherical morphology with uniform size distribution. Additionally, Fourier-transform infrared (FTIR) analysis exhibited a vibrational peak at 616 cm-1. The degradation of methyl blue was investigated using a UV-Vis spectrophotometer as part of the study.