Zinc Research Articles

Na ions doped Fe2VO4 cathode for high performance aqueous zinc‐ion batteries

Aqueous zinc ion batteries are thought to be a new generation of secondary batteries that will replace lithium ion batteries due to their great safety and inexpensive cost. In the cathode materials of aqueous zinc ion batteries with long life and high capacity, abundant active sites and crystal structure stability play an important role. In the present work, the strategy of Na+ intercalation of Fe2VO4 (FVO) is proposed, aiming at the insertion of Na+, which not only enriches the active sites, but also sodium and iron ions act as guest species with the negatively charged VOx lattice to provide strong electrostatic attraction to stabilize the lamellar structure. In terms of electrochemical performance, the discharge specific capacity is 370 mAh g‐1 at a current density of 0.1 A g‐1, and when the current density is arising 5 A g‐1, the specific capacity also reaches 200 mAh g‐1 after cycling 2000 with a capacity retention of 99%, which is better than the electrochemical performance of Fe2VO4 (FVO) alone at 50 mAh g‐1. The superior electrochemical performance proves that FVO‐Na is an ideal cathode material for zinc ion batteries.

First‐Principles Calculation of SnSe2 Material as Anode Material of Zinc Ion Battery

ABSTRACTThe development of high‐performance ion battery anode materials is conducive to the rapid development of urban rail transit. Based on first‐principles calculations, this paper studies the potential performance of the recently discovered two‐dimensional material SnSe2 as a negative electrode for zinc ion batteries. By calculating the adsorption energy, the most stable adsorption configuration of Zn was determined. The band gap of intrinsic SnSe2 decreases after strain, which promotes the transition of carriers. The band gap opens after the strain occurs in the Zn adsorbed SnSe2 system (Zn‐SnSe2), which confirms the regulation of strain on the band gap. The lowest diffusion barrier of Zn is 0.083 eV. The theoretical zinc storage capacity is calculated to be 387.550 mAh/g. The calculation results provide theoretical parameters for the application of SnSe2 in ion batteries.

Stable Zinc Metal Battery Development: Using Fibrous Zirconia for Rapid Surface Conduction of Zinc Ions With Modified Water Solvation Structure.

The two most critical technical issues in Zn-based batteries, dendrite formation, and hydrogen evolution reaction, can be simultaneously addressed by introducing negatively charged fibrous ZrO2 as a separator. Electron redistribution between ZrO2 and Zn2+ ions renders the ZrO2 surface a preferred adsorption site for Zn2+ ions, making surface conduction the primary ion-transport mode. Surface conduction enables fibrous ZrO2 to exhibit a 6.54 times higher single-Zn-ion conductivity than that of conventional glass fiber, minimizing the concentration gradient of Zn2+ and suppressing dendrite formation. Additionally, strong Zr─O─Zn bonding stabilizes the Zn2+ ions with fewer solvated H2O molecules (≈2), preventing water molecules from approaching the electrode surface, as evidenced by a 58.8% decrease in the hydrogen evolution rate. Consequently, the cycling stability of a fibrous-ZrO2-based Zn/Zn symmetric cell (3000h at 1mAhcm-2 and 5mAcm-2) is approximately ten times greater than that of the conventional variant. Furthermore, a fibrous-ZrO2-based Zn-I2 full cell exhibits a notably high energy density (271.4Whkg-1) as well as a long lifespan (≈5000 cycles) at an ultrahigh current density (4Ag-1).

Micro/Meso‐Porous Double‐Shell Hollow Carbon Spheres through Spatially Confined Pyrolysis for Supercapacitors and Zinc‐Ion Capacitor

AbstractEnergy storage in supercapacitors and hybrid zinc ion capacitors (ZIC) using porous carbon materials offers a promising alternative method for clean energy solutions. The unique combination of hierarchical porous structure and nitrogen doping in these materials has demonstrated significant capacity for energy storage. Nevertheless, the full potential of these materials, particularly the relationship between pore structure configuration and performance, remains underexplored. Herein, a confined pyrolysis strategy based on the polymerization characteristics of polydopamine (PDA) was developed to construction of hollow carbon spheres with microporous/mesoporous dual shell structure. The depth of micropores and cavity can be controlled by adjusting the duration of heat treatment and hydrothermal treatment, in accordance with the decomposition and polymerization characteristics of PDA. Due to the elasticity of this structure, the relationship between the micro/mesoporous depth of the prepared carbon spheres and the energy storage performance in supercapacitors and ZIC is established. Through optimizing the ion transport capacity of carbon spheres and considering the influence of its internal cavity structure on energy storage, the resulting carbon spheres exhibit high specific capacitance of 389 F g−1 in supercapacitor and specific capacitance of 260 F g−1 and excellent stability with 99.3 % retention after 30000 chare/discharge cycles in ZIC.

Mechanism-Guided Rational Design of Anode Coatings for Aqueous Zinc Ion Batteries.

Aqueous zinc ion batteries (ZIBs) hold promises as a safer, more cost-effective, and environmental-friendly alternative to lithium-ion batteries, especially for stationary energy storage. Recent advancements in protective anode coatings, which fine-tune zinc ion solvation structure, have yielded significant improvements in the aqueous ZIB performance, addressing dendrite formation and side reactions, thereby prolonging cycle lifetime. Understanding the underlying mechanisms of these coatings as ions sieves is crucial for further optimization and achieving long-term stability, which is a key requirement for practical applications. This concept explores recent developments in ZIB anode coatings from the view of molecular mechanisms and points out future research directions.

Bidirectional enhancement of output performance of nanogenerators by M-COFs materials

The emergence of nanogenerators, which have the ability to capture mechanical energy from the environment and to collect and transmit tiny energy, is rapidly becoming a hot research topic. The performance of electrode materials is the key to the efficiency of nanogenerators. Covalent organic skeletons (COFs), a class of crystalline organic porous materials with the advantages of large specific surface area, high porosity, tunable structure, and flexible tailorability, have very significant advantages in being used as nanogenerator materials. In this paper, we synthesised two COF materials to investigate the effect of the introduction of active metals on the friction power generation performance of COFs without changing their topology, COF-2 containing zinc ions is capable of generating a short-circuit current of 107.5 µA during friction. The porous structure increases the effective contact area to form a larger charge density, and the introduction of metal ions can accelerate the charge separation and transport. The two bidirectional synergistic effects of the materials significantly improve the output performance of the nanogenerator, and a simple and efficient method is explored for the enhancement of the output performance of COF-based triboelectric nanogenerators.

The Development and Prospect of Stable Polyanion Compound Cathodes in LIBs and Promising Complementers.

Cathode materials are usually the key to determining battery capacity, suitable cathode materials are an important prerequisite to meet the needs of large-scale energy storage systems in the future. Polyanionic compounds have significant advantages in metal ion storage, such as high operating voltage, excellent structural stability, safety, low cost, and environmental friendliness, and can be excellent cathode options for rechargeable metal-ion batteries. Although some polyanionic compounds have been commercialized, there are still some shortcomings in electronic conductivity, reversible specific capacity, and rate performance, which obviously limits the development of polyanionic compound cathodes in large-scale energy storage systems. Up to now, many strategies including structural design, ion doping, surface coating, and electrolyte optimization have been explored to improve the above defects. Based on the above contents, this paper briefly reviews the research progress and optimization strategies of typical polyanionic compound cathodes in the fields of lithium-ion batteries (LIBs) and other promising metal ion batteries (sodium ion batteries (SIBs), potassium ion batteries (PIBs), magnesium ion batteries (MIBs), calcium ion batteries (CIBs), zinc ion batteries (ZIBs), aluminum ion batteries (AIBs), etc.), aiming to provide a valuable reference for accelerating the commercial application of polyanionic compound cathodes in rechargeable battery systems.

Rapid and Efficient Dual Detection Of Zn2+ Ions and Oxytetracycline Hydrochloride Using a Responsive Fluorescent "On-Off" Sensor Based on Simple Salen-Type Schiff Base Ligand.

This research has progressed to an effective detection chemosensor of zinc, aluminum ions and oxytetracycline hydrochloride antibiotic based on the fluorescence technique. A straightforward method utilizing microwave irradiation was employed to synthesize the salen-type Schiff base ligand N,N'-bis(salicylaldehyde)4,5-dichloro-1,2-phenylenediamine (H2I), providing a good 70 % yield. In ethanol, the H2I sensor demonstrated remarkable rapidity, selectivity, and sensitivity in detecting zinc ions. The fluorescence spectrum exhibited a 44-fold substantial enhancement at 522 nm and achieved a low limit of detection (LOD) of 1.47 μM. Furthermore, the H2I probe's emission intensity increased by 124 times when compared to the ligand's ability to detect Al3+ ions at 494 nm with a LOD value of 7.4 μM. Additional research was done using the H2I probe's effective Zn2+ detection capability. The ability to recognize zinc ions in different real water samples demonstrated a recovery rate of 98.67 % to 103.31 %. Interestingly, a naked-eye visible fluorescence color of H2I solution impregnated filter papers turned colorless into yell ow under UV irradiation by adding Zn2+ ions, renders it suitable for developing a practical zinc ion detection kit test. In particular, the I-Zn2+ complex effectively quenched the fluorescence toward oxytetracycline hydrochloride (OTC) with a LOD value of 1.49×10-2 μM in DMSO:H2O (6 : 4, v/v). This is a novel and effective procedure for sensing OTC antibiotic by the I-Zn2+ complex. These findings hold immense potential for the development of dual fluorescent probes, thereby enhancing sensitivity and specificity in identifying metal ions and antibiotics in a wide range of applications.

Synthesis and structural studies on zinc(II) macrocyclic and hetrocyclic complexes derived from schiff base and mixed ligands of 1,4-dihydroquinoxaline-2,3-dione, orthophenylene diamine and hydroquinone

In this study two new zinc(II) complexes involving oxygen and nitrogen donor sequences derived from 1,4-dihydroquinoxaline-2,3-dione (QXD), o-phenylenediamine (OPD) and hydroquinone (HQ) were synthesized through a template procedure. The structural elucidation of these complexes was carried out using measurement of molar conductance in 1x10-3 M solution of DMSO and various spectral techniques; 1H and 13C NMR, FT-IR, UV-VIS and AAS. The results showed that the zinc(II) ion coordinates with the Schiff base ligands in octahedral geometry, leading to the formation of stable macrocyclic and heterocyclic structures. The cyclic ligand (L) was found to coordinate as NNNN donor, through four imine nitrogen atoms which were formed up on condensation of the –NH2 groups on o-phenylenediamine with C=O group on quinoxaline dione in a 2:2 mole ratio, in the presence of one mole equivalent of ZnCl2 in ethanol medium. It also indicates the formation of a new mixed ligand zinc(II) complex with an OO OO O O coordination around zinc(II). The study contributes to the understanding of the coordination chemistry of zinc(II) with Schiff bases and provides insights into the development of novel zinc-based complex compounds. KEY WORDS: Macrocyclic and mixed ligand, 1,4-Dihydroquinoxaline-2,3-dione, o-Phenylenediamine, Hydroquinone Bull. Chem. Soc. Ethiop. 2025, 39(1), 49-64. DOI: https://dx.doi.org/10.4314/bcse.v39i1.4

Zinc Influences the Efficacy of Betulinic Acid Treatment and Radiotherapy in Breast Cancer Cells

The trace element zinc influences a number of biological reactions, including cell growth, apoptosis, and DNA damage, which affect tumor therapy. The natural compound betulinic acid (BA) and its derivatives are known for their antiviral, antibacterial, and antitumor effects. Previous studies show that BA and 3-acetyl-28-sulfamoyloxybetulin (CAI3) have high cytotoxicity and induce radiosensitization in breast cancer cells. This study investigates the effects of zinc supplementation on treatment with BA or CAI3 and radiotherapy of breast cancer cell lines MDA-MB-231 and HS578T. Expression analysis shows that BA and CAI3 lead to altered expression of genes involved in zinc metabolism. Zinc supplementation affects cell survival and cell death alone and in combination with BA or CAI3 in both breast cancer cell lines. In MDA-MB-231 cells, zinc excess protects against ROS formation by BA or CAI3 and exhibits radioprotective effects compared to the single agent treatment. In contrast, in HS578T cells, zinc induces ROS formation but does not affect radiosensitivity. The variable effects of zinc on radiosensitivity highlight the importance of individualized treatment approaches. Although zinc has cytotoxic, pro-apoptotic, and anti-clonogenic effects, it seems worthwhile to consider its radioprotective properties when making treatment decisions in the case of adjuvant radiotherapy of breast cancer.

Rational design of α-MnO2@TiO2 composites for high-performance zinc ions batteries

Aqueous zinc ions batteries (AZIBs) have attracted widespread interest due to their remarkable energy density, non-toxicity, environmental friendliness and low cost. However, the application of MnO2 cathode materials for AZIBs is limited owing to the dissolution of Mn2+, structural collapse and intrinsic poor conductivity. Herein, α-MnO2@TiO2 composites were synthesized via simple hydrothermal and calcination approaches. Some smaller TiO2 were coated on the MnO2 nanorods to form the protective layer. The TiO2 protective layer not only prevents the dissolution of Mn2+ and structural collapse of MnO2, but also enhances the conductivity of the material due to the presence of Ti3+ defects, which increased electrode materials wettability, specific surface area and diffusion rate of Zn2+. In addition, the coating TiO2 causes surface adsorbed oxygen and surface binding defects in α-MnO2@TiO2, and increases surface reactivity and electrochemically active sites, which provides abundant channels and available insertion electrochemically active sites for H+/Zn2+ transport. As a result, α-MnO2@TiO2–2 delivers a high specific capacity of 182.90 mAh g−1 at 1 A g−1 after 600 cycles and outstanding rate capacity of 127.91 mAh g−1 at 5 A g−1. This work provides an idea for exploring high-performance cathode materials for AZIBs.

A potent nano-strategy for dual energy deprivation to inhibit pancreatic cancer progression

Pancreatic cancer is a highly malignant tumor that poses significant threats to public health, and glycolysis plays a crucial role in its energy metabolism. Here, glycolysis was confirmed to be directly associated with poor prognosis through the use of clinical samples from 130 patients with pancreatic ductal adenocarcinoma (PDAC), and the effectiveness of zinc ions (Zn2+) in inhibiting glycolysis-related genes was further validated. Therefore, polyvinyl pyrrolidone (PVP)-modified zinc sulfide nanomedicines (ZnS-PVP) were developed for dual energy suppression by targeting glycolysis and mitochondrial respiration in pancreatic cancer. On the one hand, the released Zn2+ efficiently inhibited glycolysis in pancreatic cancer cells through the PI3K-Akt-mTOR-HIF-1α signaling axis. On the other hand, acid-responsive release of hydrogen sulfide (H2S) gas damaged mitochondria and further reduced energy compensation by inhibiting oxidative phosphorylation. This two-pronged energy deprivation nano-strategy effectively eliminated pancreatic cancer cells and was proven to overcome chemotherapeutic resistance. Moreover, ZnS-PVP administration combined with immune checkpoint blockade (ICB) therapy significantly suppressed tumor progression in mouse orthotopic pancreatic tumor models, as also demonstrated in a pancreatic cancer patient-derived xenograft (PDX) model. Our work highlights the positive role of bioactive metal ions in targeting tumor energy metabolism and the great potential of nano-strategy for energy deprivation in the treatment of pancreatic cancer.

Zinc ions activate AKT and promote prostate cancer cell proliferation via disrupting AKT intramolecular interaction.

Prostate is a zinc rich organ and the physiological function of the abundant zinc ions is relatively less understood. AKT kinase is a pivotal regulator downstream of cytokines, growth factors and other extracellular stimuli, and the attachment of its PH domain to PtdIns-3,4,5-P3 (PIP3) and the subsequent phosphorylation of its kinase domain by PDPK1 are considered important for its activation. Herein, we report a regulatory mechanism of AKT kinase by zinc ions. Mechanistically, zinc ions directly bind to AKT and facilitate AKT activation through disrupting the interaction between PH and kinase domains within AKT molecule. Consistently, AKT1-H89A/E91A mutant (zinc-binding-deficient) fails to respond to zinc ions and exhibits strong interaction between PH and kinase domains, and it is less oncogenic in orthotopic xenograft model of prostate cancer. On the other hand, the AKT1-W80L mutant with minimum intra-molecular interaction between PH and kinase domains shows strong tumor promoting capacity although it could not be further stimulated by zinc ions. Overall, this study reveals a distinctive regulatory mechanism of AKT activation and implies a tumor promoting role of the zinc ions in prostate cancer.

Bioleaching of Industrial Metallic Steel Waste by Mixed Cultures of Thermoacidophilic Archaea

Different mixed cultures of extremely thermoacidophilic microorganisms were used for bioleaching of metalliferous industrial dust waste derived from the basic oxygen furnace (BOF) steelmaking process. Such mixed cultures can extract various metals from multi-metallic BOF-dust waste, improving the metal dissolution and bioleaching performance in frames of metal recycling processes to assist circular economies and waste management. The results of the investigation showed that mixed cultures of thermoacidophilic archaea of the order Sulfolobales (Acidianus spp., Sulfolobus spp., and Metallosphaera sedula) during their growth in laboratory glass bioreactors provided a superior bioleaching system to Acidianus manzaensis alone. Depending on the composition of mixed thermoacidophilic cultures, extraction of various metals from BOF-dust could be achieved. Among the three different types of mixed cultures tested, the mixed culture system of A. manzaensis, A. brierleyi, and S. acidocaldarius was most effective for extraction of major elements (Fe, Ca, Zn, Mn, and Al). The mixed culture of A. manzaensis, A. brierleyi, and M. sedula showed high performance for bioleaching of most of the minor elements (Cu, Ni, Pb, Co, Mo, and Sr). The efficient ability of mixed cultures to colonise the mineral matrix of the metal waste product was observed via scanning electron microscopy, while their metal extraction capacities were analysed by inductively coupled plasma mass spectrometry. These investigations will promote the further design of microbial consortia in order to break down the solid matrix and efficiently extract metals from metalliferous waste materials.

Co-solvent electrolyte-induced zinc anode surface reconstruction for high performance zinc ion batteries

The progress of rechargeable zinc (Zn) ion batteries (RZBs) has been significantly impeded by the occurrence of side reactions and dendritic issues on Zn anodes, which are attributed to the intricate reaction kinetics observed in aqueous electrolytes. Herein, we propose a co-solvent electrolyte comprising a combination of N, N-dimethylformamide (DMF) and Dimethyl sulfoxide (DMSO). This electrolyte reconstructs the surface of the Zn anode and generates a dense and robust solid electrolyte interface (SEI), which promotes uniform Zn2+ deposition and enhances Zn2+ transport kinetics. The DFT further shows that the electrolyte has a unique solvated structure which enables uniform Zn2+ deposition and the creation of stable SEI. By utilizing these advantages, the co-solvent electrolyte is capable of enduring uninterrupted cycling for more than 4000 h at a current density of 1 mA cm−2, and for over 2000 h at a current density of 5 mA cm−2. Furthermore, the Zn||NH4V4O10 full cell demonstrated exceptional electrochemical performance with regard to charge/discharge capacity and cycle stability. This study showcases the effectiveness of non-aqueous electrolytes, which will enable the progress of secure and high-capacity RZBs.

Trace Amounts of Multifunctional Electrolyte Additives Enhance Cyclic Stability of High-Rate Aqueous Zinc-Ion Batteries.

Aqueous zinc ion batteries (AZIBs) are renowned for their exceptional safety and eco-friendliness. However, they face cycling stability and reversibility challenges, particularly under high-rate conditions due to corrosion and harmful side reactions. This work introduces fumaric acid (FA) as a trace amount, suitable high-rate, multifunctional, low-cost, and environmentally friendly electrolyte additive to address these issues. FA additives serve as prioritized anchors to form water-poor Inner Helmholtz Plane on Zn anodes and adsorb chemically on Zn anode surfaces to establish a unique in situ solid-electrolyte interface. The combined mechanisms effectively inhibit dendrite growth and suppress interfacial side reactions, resulting in excellent stability of Zn anodes. Consequently, with just tiny quantities of FA, Zn anodes achieve a high Coulombic efficiency (CE) of 99.55 % and exhibit a remarkable lifespan over 2580 hours at 5mA cm-2, 1 mAh cm-2 in Zn//Zn cells. Even under high-rate conditions (10mA cm-2, 1 mAh cm-2), it can still run almost for 2020 hours. Additionally, the Zn//V2O5 full cell with FA retains a high specific capacity of 106.95 mAh g-1 after 2000 cycles at 5 A g-1. This work provides a novel additive for the design of electrolytes for high-rate AZIBs.

A Feasible Strategy for High-Performance Aqueous Zinc-Ion Batteries: Introducing Conducting Polymer.

Aqueous zinc ion batteries (AZIBs) offer great potential for large-scale energy storage because of their high safety, low cost and acceptable energy density. However, the cycle life of AZIBs is inevitably affected by parasitic reactions and dendritic growth caused by multiple factors such as electrode, electrolyte and separator, which pose significant obstacles to the practical application of AZIBs. To address these challenges, conducting polymer (CP) based materials have gained widespread attention in the realm of rechargeable batteries due to the adjustable band gap, controllable morphology, and excellent flexibility of CPs. In particular, CPs exhibit remarkable conductivity, low dimensionality, and doping characteristics, making them highly promising for integration into the AZIB system. In this review, the problems associated with the cathode, anode, electrolyte, and separator of AZIBs are discussed, and the application of CPs for their modification is summarized. The review provides a comprehensive analysis of the action mechanisms involved in the CP modification process and offers valuable insights for the design and development of CPs that can be effectively utilized in AZIBs. Additionally, the review presents a promising outlook of this research field, aiming to further advance the application of low-cost and high-performance CPs and their composites in AZIBs.

Organic Electrolyte Additives for Aqueous Zinc Ion Batteries:Progress and Outlook.

Aqueous zinc ion batteries (AZIBs) are considered one of the most prospective new-generation electrochemical energy storage devices with the advantages of high specific capacity, good safety, and high economic efficiency. Nevertheless, the enduring problems of low Coulombic efficiency (CE) and inadequate cycling stability of zinc anodes, originating from dendrites, hydrogen precipitation and passivation, are closely tied to their thermodynamic instability in aqueous electrolytes, which significantly shortens the cycle life of the battery. Electrolyte additives can solve the above difficulties and are important for the advancement of affordable and reliable AZIBs. Organic electrolyte additives have attracted widespread attention due to their unique properties, however, there is a lack of systematic discussion on the performance and mechanism of action of organic electrolyte additives. In this review, a comprehensive overview of the application of organic electrolyte additives in AZIBs is presented. The role of organic electrolyte additives in stabilizing zinc anodes is described and evaluated. Finally, further potential directions and prospects for improving and directing organic electrolyte additives for AZIBs are presented.

Harnessing biological insights: Integrating proton regulation, pH buffer and zincophility for highly stable Zn anode

Zinc anodes are severely threatened by hydrogen evolution, dendrite growth and by-products. Inspired by the mechanisms of L-carnosine (L-car) in maintaining intracellular pH stability and fostering mucosal repair in biological systems, this study innovatively proposed a comprehensive strategy integrating proton regulation, pH buffer and zincophility by introducing L-car as an electrolyte additive to achieve remarkable stability of zinc anode. Experimental validations and theoretical calculations demonstrate that the abundant N and O sites in L-car can form robust hydrogen bonds with protons, effectively impeding interfacial proton transport and substantially mitigating HER. Moreover, dual pH buffering sites of L-car facilitate dynamic modulation of proton concentration, stabilizing the pH of electrolyte, and suppressing Zn corrosion/passivation/by-product. Concurrently, the robust chelation between L-car and Zn2+ orchestrates uniform zinc ion deposition. This synergistic trifecta of L-car endows Zn ion batteries with an extraordinary cycling stability, extending to an ultralong duration of 5500 h. Furthermore, the Zn//MnO2 full battery, demonstrates remarkable stability, retaining a specific capacity of 106.1 mAh/g with 79.2 % retention after 1000 cycles at 3 A/g. This study pioneers the interdisciplinary application of L-car in electrolyte modification, presenting a novel paradigm for stabilizing zinc anodes.

Zinc and copper effect mechanical cell adhesion properties of the amyloid precursor protein.

The amyloid precursor protein (APP) can be modulated by the binding of copper and zinc ions. Both ions bind with low nanomolar affinities to both subdomains (E1and E2) in the extracellular domain of APP. However, the impact of ion binding on structural and mechanical trans-dimerization properties is yet unclear. Using a bead aggregation assay (BAA), we found that zinc ions increase the dimerization of both subdomains, while copper promotes only dimerization of the E1 domain. In line with this, scanning force spectroscopy (SFS) analysis revealed an increase in APP adhesion force up to three-fold for copper and zinc. Interestingly, however, copper did not alter the separation length of APP dimers, whereas high zinc concentrations caused alterations in the structural features and a decrease of separation length. Together, our data provide clear differences in copper and zinc mediated APP trans-dimerization and indicate that zinc binding might favor a less flexible APP structure. This fact is of significant interest since changes in zinc and copper ion homeostasis are observed in Alzheimer's disease (AD) and were reported to affect synaptic plasticity. Thus, modulation of APP trans-dimerization by copper and zinc could contribute to early synaptic instability in AD.