Zeta Potential Research Articles

Demystifying the Potential of Embelin-Loaded Nanoformulations: a Comprehensive Review.

Phytoconstituent based therapies have the potential to reduce the adverse effects and enhance overall patient compliance for different diseased conditions. Embelin (EMB) is a natural compound extracted from Embelia ribes that has demonstrated high therapeutic potential, particularly as anti-inflammatory and anticancer therapeutic applications. However, its poor water solubility and low oral bioavailability limitations make it challenging to use in biomedical applications. Nanostructure-based novel formulations have shown the potential to improve physicochemical and biological characteristics of active pharmaceutical ingredients obtained from plants. Different nanoformulations that have been utilized to encapsulate/entrap EMB for various therapeutic applications are nanoliposomes, nanostructured lipid carriers, niosomes, polymeric nanoparticles, nanosuspensions, phytosomes, self nanoemulsifying drug delivery system, silver nanoparticles, microparticles, solid lipid nanoparticle, gold nanoparticles and nanomicelles. The common methods reported for the preparation of EMB nanoformulations are thin film hydration, nanoprecipitation, ethanol injection, emulsification followed by sonication. The size of nanoformulations ranged in between 50 and 345nm. In this review, the mentioned EMB loaded nanocarriers are methodically discussed for size, shape, drug entrapment, zeta potential, in vitro release & permeation and in vivo studies. Potential of EMB with other drugs (dual drug approach) incorporated in nanocarriers are also discussed (physicochemical and preclinical characteristics). Patents related to EMB nanoformulations are also presented which showed the clinical translation of this bioactive for future utilization in different indications.

Enhancing Vaccine Efficacy with Polyethylenimine-Modified Lovastatin-Loaded Nanoparticle Pickering Emulsion Adjuvant.

Despite the potent immunoadjuvant properties of mevalonate pathway inhibitors, their application is constrained by poor solubility and instability. In this study, we developed a cationic nanoparticle-stabilized Pickering emulsion loaded with lovastatin (Lov-PPE), using polyethylenimine (PEI)-modified PLGA nanoparticles and squalene as carriers. The system was prepared and tested by evaluating the physicochemical properties and adjuvant efficacy of the Lov-PPE. Lov-PPE/O demonstrated good particle size distribution and zeta potential, with an adsorption efficiency of up to 73.07%. The immunization results showed that Lov-PPE/O significantly promoted the production of OVA-specific IgG antibodies, activated CD4+ and CD8+ T cells, and induced a strong mixed Th1/2 immune response. Additionally, safety assessments indicated that Lov-PPE/O has good in vivo safety. This study demonstrates that the PEI-modified lovastatin PLGA nanoparticle Pickering emulsion (Lov-PPE) is an effective vaccine adjuvant capable of significantly enhancing humoral and cellular immune responses while possessing good safety, offering a new strategy for vaccine formulation development.

Synthesis of Silver Nanoparticles and Forced Convective Heat Transfer Coefficient Measurement of Silver-Water Nanofluids at Laminar Flow

Heat management in industries and other areas is a major issue currently worldwide. Conventional heat transfer fluids like water and ethylene glycol are not very effective. Nanofluids (NFs), composed of nanoparticles (NPs) dispersed throughout a base fluid (BF), have recently been identified as promising heat management agents for various industrial and other applications. Heat transmission is one of the many uses for AgNPs–water NFs (silver NPs (AgNPs) dispersed in water). The goal of this work was to determine the AgNPs–water NFs' forced convective heat transfer coefficient (HTC) in laminar flow. Due to this, we present the results of the HTC study of AgNPs–water NFs in laminar flow in this paper. First, using AgNO3 as a precursor, a chemical reduction approach was used for facile synthesis of AgNPs in one pot at ambient temperature. Synthesized NPs were examined using ultraviolet-visible spectroscopy (UV-vis), X-ray diffraction (XRD), and transform electron microscopy (TEM) techniques. The average particle size obtained from TEM is 25 nm. The required quantity of AgNPs was added to the water to produce 0.5 and 1.0 vol% of AgNPs–water NFs. Next, zeta potential and dynamic light scattering (DLS), in addition to time-lapse observation and captured picture comparison, were used to assess the stability of the formulated NFs. To calculate the forced convective HTC of prepared NFs in laminar flow, a vertical shell and tube heat transfer apparatus and computer-based data recorder were used. According to the results, in comparison to BF, the HTC of 0.5 and 1.0 vol% NFs was 3.3 and 5 times greater, respectively which encourages the use of AgNPs–water NFs in industry and other heat management. Jagannath University Journal of Science, Volume 11, Number 1, June 2024, pp. 13−22

UV light promoted dihydrolipoic acid and its alanine derivative directed rapid synthesis of stable gold nanoparticles and their catalytic activity

In general, colloidal gold nanoparticles (AuNPs) have been synthesized in heated or boiling water containing HAuCl4 precursor with sodium citrate as reducing stabilizing reagent. Although temperature plays a driving for synthesis of AuNPs, elevated temperature in thermal reduction method causes aggregation of the AuNPs. The preferential, rapid and strong binding of dihydro-lipoic acid and its derivatives on surface of AuNPs via thiol − Au chemistry promote the production of very stable AuNPs. In this study, we have developed citric acid (CA), dihydrolipoic acid (DHLA) and DHLA-Alanine (DHLA-Ala) directed rapid synthesis of ultra-stable AuNPs, DHLA@AuNPs and DHLA-Ala@AuNPs, under the UV (311 nm) irradiation at room temperature (RT: 25 °C) in around 10 min (min). CA is used as a potential reducing agent to expedite both reduction of Au3+ ion and AuNP formation, DHLA and DHLA-Ala act as stabilizing agents by replacing CA molecules on surface of AuNPs in order to produce quite stable AuNP. It is worthy to mention that reduction of Au3+ ion, formation and surface stabilization of AuNPs are consequently occurred in one step. We also investigated how experimental parameters including reaction time and temperature, pH of reaction solution, affect formation of the AuNPs. The effects of salt concentration and storage temperature were studied to show stability of the AuNPs. The synthesized DHLA@AuNPs and DHLA-Alanine@AuNPs were characterized via UV-Vis spectrophotometer (UV-Vis), scanning transmission electron microscope (STEM), dynamic light scattering (DLS) and Zeta potential (ZT) devices. The reduction of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) was efficiently catalyzed by the AuNPs in the presence of sodium borohydride in aqueous solution.

Atorvastatin loaded glycerosomal patch as an effective transdermal drug delivery: optimization and evaluation.

Aim: The study explores glycerosomes as effective vesicular systems for transdermal delivery of atorvastatin (ATO) to overcome drawbacks related to its oral administration.Methodology: The objectives of this study were to formulate, by thin-film hydration method, optimize using definitive screening design and evaluate ATO-loaded glycerosomes (ATOG) which were then incorporated into patch followed by the evaluation of glycerosomes containing different concentration of glycerol.Results & discussion: Vesicle size, Polydispersity index (PDI), zeta potential, entrapment efficiency and loading capacity of spherical ATOG (0-30%w/w) showed 137.3-192d.nm, 0.292-0.403, -3.81 to-6.76mV, 80.03-92.77% and 5.80-6.40%, respectively. In-vitro release study showed sustained release, increased skin permeability and better cell viability than pure drug. ATOG patches showed greater skin permeability than pure drug and ATO-liposomal patches.Conclusion: The study concludes that ATOGs are promising for effective transdermal delivery.

Exploring Nanocarriers for Boosting Entacapone Bioavailability: A Journey through System Characterization and Assessment of Toxicity and Pharmacological and 2D Permeability Paybacks.

Catechol-O-methyltransferase inhibitors (iCOMT), such as entacapone, have been successfully employed to treat tremor-related symptoms of Parkinson's disease. However, iCOMT has been associated with a short half-life and poor oral bioavailability. Nanobased drug delivery systems have often been used to overcome this type of setbacks. Therefore, entacapone was encapsulated in PEGylated poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles (NPs) via a nanoprecipitation process, as well as in PEGylated nanostructured lipid carriers (NLCs) using a solvent emulsification/evaporation method. Both nanoformulations presented sub-200 nm populations, with zeta-potential (ZP) values close to -30 mV, and showed stability at different pHs, while maintaining their physicochemical properties mostly intact, presenting only a change in their superficial charge (ZP values), indicating their interaction. Both nanoformulations presented interaction with mucins, which anticipates good permeation and bioavailability for oral and topical administration. No cytotoxic effects were observed for lyophilized PLGA NPs encapsulating entacapone, in which 2-hydroxypropyl-ß-cyclodextrin (HPβCD) was used as a cryoprotectant at 3% concentration (HP-PLGA@Ent), in human hepatocellular carcinoma (HepG2), human neuroblastoma (SH-SY5Y), or human epithelial colorectal adenocarcinoma (Caco-2) cell lines. Conversely, NLCs encapsulating entacapone (W-NLCs@Ent) presented cytotoxic effects on the HepG2 cell line, likely due to intracellular lipid accumulation or storage. Both nanoformulations maintained a COMT inhibition effect in HepG2 cells, using 3-BTD as the COMT probe. An increase of entacapone permeability in both monolayer and coculture models (Caco-2 and Caco-2/HT29-MTX, respectively) was observed for the developed nanoformulations. Overall, this work shows that encapsulated entacapone in different nanocarriers could be a stimulating alternative to solve entacapone setbacks, since they improve its physicochemical properties and permeability while still maintaining the COMT inhibitory activity.

Evaluation of Mucoadhesive Nano-Bilosomal In Situ Gels Containing Anti-Psychotic Clozapine for Treatment of Schizophrenia: In Vitro and In Vivo Studies

Background/Objectives: Patients with schizophrenia have significant challenges in adhering to and complying with oral medicines, resulting in adverse consequences such as symptom worsening and psychotic relapse. Methods: This study aimed to develop clove oil-based bilosomes using definitive screening design (DSD) to maximize the anti-schizophrenic action of clozapine and promote its nose-to-brain delivery. The target was to optimize the physicochemical properties of bilosomes and incorporate them into mucoadhesive intranasal in situ gels, searching for augmented ex vivo and in vivo clozapine delivery. Results: The bilosomes’ particle size was decreased by increasing the span, SDC, and clove oil amounts. In addition to using a high lipid amount, the aforementioned components also helped increase the entrapment efficiency values. Increased zeta potential was only observed by increasing surfactant amount and reducing clozapine concentration. After incorporation of optimized liquid clove oil-based bilosomes, which had a spherical nano-sized vesicular shape, into P 407-dependent gels, an HPMC (2% w/w)/P 407 (20% w/w)-containing formulation (G6) was selected as an optimized gel owing to its acceptable gelation time (13.28 s), gel strength (27.72 s), viscosity (12,766.67 cP), and mucoadhesive strength (4273.93 dyne/cm2). The optimized G6 exhibited higher Jss (50.86 μg/cm2·h−1) through the nasal mucosa compared to the control gel (23.03 μg/cm2·h−1). Compared to the control gel, G6 displayed higher relative bioavailability (491.37%) than a commercial tablet (264.46%). Following ELISA analysis, dopamine and serotonin were significantly reduced, while BDNF was remarkably increased after administration of optimized G6 into schizophrenic rats. Conclusions: Our study indicates the potential of intranasal bilosomal gels in upgrading the anti-schizophrenic and neuroprotective activity of clozapine.

Chitosan xerogel embedded with green synthesized cerium oxide nanoparticle: An effective controlled release fertilizer for improved cabbage growth

With the growing awareness on the adverse effects of conventional fertilizers; the use of sustainable and controlled release fertilizers has garnered much significance. In the present study, we report the synthesis of chitosan-benzaldehyde Schiff base xerogel incorporated with green synthesized cerium oxide nanoparticle using Psidium guajava leaves extract as a sustainable fertilizer. Spherical CeO2 NPs having an average particle size of 15.3 nm and zeta potential of – 39.9 mV was obtained. The urea-loaded nanocomposite xerogel (CsB@U/CeO2) was examined for cabbage growth. The water retention capacity extended for >2 weeks. A controlled release profile for urea was accomplished from CsB@U/CeO2 for a period extending for 30 days. The kinetics assay suggested that presence of CeO2 NPs asserted a greater role in urea-controlled release from the CsB@U/CeO2 nanocomposite hydrogel owing to polymer relaxation. The growth parameters of cabbages such as head height, diameter, fresh head weight, head circumference was enhanced in plants fertilized by CsB@U/CeO2 as compared to urea. Furthermore, the phenolic content, free radical scavenging activity, protein content, sugar and flavonoid content were also found higher in CsB@U/CeO2 fertilized plants. This study puts forth CsB@U/CeO2 xerogel can be potentially harnessed as an alternative to urea in sustainable agriculture.

Systematic Approach in the Development of Chitosan Functionalized Iloperidone Nanoemulsions for Transnasal Delivery, In Vitro and In Vivo Studies.

Iloperidone, a second-generation USFDA approved antipsychotic and BCS class II drug shows poor oral bioavailability of 28%. The present research deals with optimization of transnasal nanoemulsions of Iloperidone using Design Expert (Version 11) and further surface functionalization with chitosan for potentiating nose to brain delivery. Chitosan functionalized transnasal Iloperidone nanoemulsions were developed using oleic acid, charge inducer, Tween 80, TranscutolHP and chitosan using ultrasonication technique and evaluated. Droplet size, polydispersity index and zeta potential of Iloperidone nanoemulsions was found to be 173 ± 0.5nm, 0.413 ± 0.2 and - 22.5 ± 0.1mV while that of chitosan functionalized Iloperidone nanoemulsions was 146.4 ± 0.5nm, 0.291 ± 0.02 and + 23.6 ± 0.3mV respectively. Ninhydrin assay, TEM and FTIR studies confirmed surface functionalization of Iloperidone nanoemulsion droplets with chitosan. In vitro release of Iloperidone from nanoemulsions and chitosan functionalized nanoemulsions was 90.41 ± 2.1% and 72.02 ± 0.21% while ex vivo permeation of Iloperidone across goat nasal mucosa was 1270.58 ± 0.023μg/cm2 and 1096.13 ± 0.043μg/cm2 respectively at the end of 8h. Studies in RPMI 2650 nasal and Neuro2A brain cell line lines indicated safety of chitosan functionalized transnasal Iloperidone nanoemulsions. Studies in Wistar rats showed increased cataleptic effects, reduced cognitive impairment and anxiety-related behaviour with greater brain accumulation indicating promising potential of this approach in nose to brain drug delivery.

Formulation and characterization of cholesterol-based nanoparticles of gabapentin protecting from retinal injury.

This study aimed to prepare cholesterol and stearic acid-based solid lipid nanoparticles of gabapentin (GAB-SLNs) for protection against streptozotocin (STZ)-induced retinal injury in rats. We prepared four preparations of GAB-SLNs using a hot high-shear homogenization ultrasonication process, and the best formulation was selected and tested for biological activity. The retinal injury was brought in male adult albino rats while gabapentin doses continued for 6weeks. Six groups of rats were assigned as the vehicle, diabetic, diabetic + gabapentin (10-20mg/kg), and diabetic + GAB-SLNs (10-20mg/kg). GAB-SLN#2 was selected as the optimized formulation with high entrapment efficacy (EE%, 98.64% ± 1.97%), small particle size (185.65 ± 2.41nm), high negative Zeta potential (-32.18 ± 0.98mV), low polydispersity index (0.28 ± 0.02), and elevated drug release (99.27% ± 3.48%). The TEM image of GAB-SLN#2 revealed a smooth surface with a spherical shape. GAB-SLNs provided greater protection against retinal injury than free gabapentin as indicated by the histopathology data which demonstrated more organization of retinal layers and less degeneration in ganglion cell layer in rats treated with GAB-SLN#2. Further, GAB-SLN#2 reduced the inflammatory proteins (IL-6/JAK2/STAT3) and vascular endothelial growth factor (VEGF). The preparation of GAB-SLNs enhanced the physical properties of gabapentin and improved its biological activity as a neuroprotectant. Further studies are warranted to validate this technique for the use of oral gabapentin in other neurological disorders.

The Development of a Novel Nanoherbal Passionfruit (Passiflora edulis) Leaves with Safety and Analgesic Effect

Passionfruit (Passiflora edulis) leaves are proven to contain flavonoids especially quercetin and showed a significant antinociceptive effect at acetic acid-induced wriggling. Modification of passionfruit leaf extract into nanoparticles can provide therapeutic effects precisely, quickly, and optimally. This study aimed to provide the method of preparation, and characterization of nanoherbal passionfruit leaves (NPL) and evaluate its safety profiles and analgesic effect. NPL was synthesized using ionic gelation methods, with 3 formula variations. Passionfruit leaf extract was dissolved using mixed solvents. The passionfruit leaves extract solution was suspended in Chitosan and dripped with sodium tripolyphosphate solution until nanoparticle formation. The characterization of the NPL study was evaluated by measuring the particle size, polydispersity index (PI), zeta potential, entrapment efficiency (EE), drug release, and transmission electron microscope (TEM) images. The safety profiles of NPL were then assessed in mice by acute and subchronic toxicity using OECD methods. The effectiveness of NPL as an analgesic was tested using an acetic acid test (visceral pain) in mice. We found the particle size of the NPL’s best formula (F2-NPL) obtained was 187.6 nm with polydispersity index 0.626 and zeta potential +31.2 mV. The entrapment efficiency of flavonoid content in NPL was 50.9 % and the flavonoid release for 3 h with 3 replications were 22.91, 27.88 and 25.27 % respectively. The morphology of the particles by TEM showed that the nanoparticles were circular shape. Safety evaluation in mice resulted in the LD50 of NPL being greater than 5000 mg/kg in the acute toxicity study and had no adverse effects on blood, liver, and renal profiles in the subchronic toxicity study. The NPL-200 group had better effectiveness as an analgesic (84.87 %) compared to NPL-50 (37.80 %) and NPL-100 (69.15 %). This finding indicates that the NPL is a safe and effective formula for enhancing analgesic effects. Thus, enables its applications for the treatment of various diseases related to analgesics and inflammation such as osteoarthritis. HIGHLIGHTS The development of traditional medicine continues to be improved, to obtain the availability of safe, high quality, efficacious traditional medicines that are scientifically tested and can be widely utilized both for self-treatment by the community and in health services It is known that the most widely reported flavonoid derivative contained in edulis leaves is quercetin. Quercetin has poor bioavailability, solubility, and stability, reducing its therapeutic effect. By creating nanoparticles, adjustments can be made to natural products including quercetin in flavonoids in order to maximize their activity, boost their bioavailability, solubility, and capacity to be swiftly absorbed in the body to deliver the best possible therapeutic effects In developing nanoherbal passionfruit leaves using the ionic galation method, several solvents were used. It is known that no chemical substance can be said to be completely safe. It is important to study the toxicity profile further to obtain safe traditional medicines. Nanoparticle formulation of passion fruit leaf extract can provide better pain inhibition effectiveness in mice GRAPHICAL ABSTRACT

Design of self-emulsifying oral delivery systems for semaglutide: reverse micelles versus hydrophobic ion pairs.

It was the aim of this study to evaluate the potential of reverse micelles (RM) and hydrophobic ion pairs (HIP) for incorporation of semaglutide into self-emulsifying oral drug delivery systems. Reverse micelles loaded with semaglutide were formed with a cationic (ethyl lauroyl arginate, ELA) and an anionic surfactant (docusate, DOC), whereas HIP were formed between semaglutide and ELA. Maximum solubility of the peptide and the rate of dissolution was evaluated in various lipophilic phases (glycerol monocaprylocaprate:caprylic acid 1:4 (m/m), glycerol monolinoleate:caprylic acid 1:4 (m/m) and glycerol monocaprylocaprate:glycerol monolinoleate 1:4 (m/m)). Self-emulsifying drug delivery systems (SEDDS) loaded with RM and HIP were characterized regarding size distribution, zeta potential, cytocompatibility and Caco-2 permeability. Droplet sizes between 50 and 300nm with polydispersity index (PDI) around 0.3 and zeta potentials between - 45 mV (RMDOC) and 36 mV (RMELA) were obtained. RM provided an almost 2-fold higher lipophilicity of semaglutide than HIP resulting in a 4.2-fold higher payload of SEDDS compared to HIP. SEDDS containing RM or HIP showed high cytocompatibilities with a cell survival above 75% for concentrations up to 0.1% on Caco-2 cells and acceptable hemolytic activity. Permeation studies across Caco-2 monolayer revealed an at least 2-fold increase in permeability of semaglutide for the developed formulations.

Biodegradable polymeric nanocomposite containing phloretin for enhanced oral bioavailability and improved myocardial ischaemic recovery

Aim The study aimed to enhance phloretin’s oral absorption and systemic availability through nanoencapsulation within biodegradable polymers, improving its anti-oxidant and cardioprotective potential. Methods Phloretin-loaded polymeric nanocomposites were prepared using ionic gelation and optimised for yield, encapsulation, loading, particle size, PdI and zeta potential. The formulation was characterised by FTIR, XRD, FESEM and MS. In-vitro drug release, stability, pharmacokinetics, biodistribution, anti-oxidant capacity, haemolysis and both in-vitro and in-vivo assessments were conducted in an ischaemia-induced rat model. Results The average particle size, zeta potential, encapsulation and drug loading of the optimised nanoparticles were 105.8 ± 1.92 nm, −41.5 ± 1.10 mV, 92.36 ± 0.01% and 18.47 ± 0.38%, respectively. Nano-phloretin enhanced oral bioavailability, anti-oxidant capacity. In-vivo, it reduced myocardial infarct size by ∼46% versus ∼13% for free phloretin, showing significant cardiomyocyte protection and ROS suppression. Conclusion The study demonstrates polymer-based nanoparticles as effective oral drug delivery systems capable of enhancing both systemic bioavailability and therapeutic efficacy of the encapsulated drug.

Utility of Microwave-Synthesized Silver Nano Particles as Spectrofluorimetric Sensors for the Determination of Nano Concentrations of Favipravir: Application to Dosage Forms and Spiked Human Plasma.

A simple and facile microwave-assisted method was developed for the synthesis of highly fluorescent silver-nanoparticles (Ag-NPs). The synthesis of silver-nanoparticles depends on a redox reaction between silver nitrate and ascorbic acid using chitosan as a stabilizing agent. The produced Ag-NPs were characterized using Zeta potential and transmission electron microscope micrograph where they are spherical in shape with smooth surface morphology and size of 26.81 ± 2.2nm. Favipiravir (FAV) was found to cause an obvious enhancement in the fluorescence of Ag-NPs; hence, they were used for its spectrofluorimetric estimation. The fluorescence intensity was measured at 430nm after excitation at 360nm. Under optimum conditions, a good linear relationship was accomplished between the FAV concentration and the fluorescence intensity in a range of (5.0-200.0) ng/mL with a limit of detection of 1.59 ng/mL. The method was successfully applied for the assay of the drug in its commercial tablets and spiked human plasma samples, and the results obtained were satisfactory.

Lymphatic targeting of cilnidipine by designing and developing a nanostructured lipid carrier drug delivery system

Objective The objective of current research is to design, develop, and optimize a cilnidipine (CLN) nanostructured lipid carrier (NLC)-based drug delivery system for the effective treatment of hypertension (HT). Significance Oral administration of CLN-loaded NLC (CLN NLC) containing glyceryl monostearate (GMS) as a solid and isopropyl myristate (IPM) as a liquid lipid may show remarkable lymphatic uptake through payer patches. Methods The emulsification probe sonication technique was used followed by optimization using 32 factorial designs. Results The optimized batch showed a mean particle size of 115.4 ± 0.22 nm with encapsulation efficiency of 98.32 ± 0.23%, polydispersity index (PDI) of 0.342 ± 0.03, and zeta potential (ZP, ζ) was −60.5 ± 0.24 which indicate excellent physical stability. In vitro studies showed a controlled release of CLN NLCs. Pharmacokinetics studies determined the C max of NLCs (373.47 ± 15.1) indicates 2.3-fold enhancement compared with plain drug (160.64 ± 7.63). Pharmacodynamic studies indicated that CLN NLCs were maintaining systolic blood pressure in a controlled manner without any signs of side effects. Conclusion CLN NLCs significantly improved lymphatic delivery and proved to be effective in the treatment and management of HT. It has been proved that CLN NLCs are found to be better than any traditional CLN dosage form due to enhancement in solubility, absorption, bioavailability, intestinal permeability, avoidance of first-pass metabolism, P-glycoprotein efflux and reduction in dose-related side effects, achievement of controlled and sustained release action.

Comparison of the efficacy of alginate nanoparticles containing Cymbopogon citratus essential oil and citral on melanoma and breast cancer cell lines under normoxic and hypoxic conditions

BackgroundSolid tumors often develop hypoxic regions, leading to aggressive behavior and increased drug resistance.MethodsThe chemical composition of Cymbopogon citratus essential oil (EO) was analyzed using GC-MS. Alginate nanoparticles containing the EO and its primary component, citral, were synthesized via the ionic gelation method. Encapsulation was confirmed using ATR-FTIR analysis. The anticancer efficacy of C. citratus EO, citral, and their respective alginate nanoparticles was evaluated under normoxic (21% oxygen) and hypoxic (1% oxygen) conditions on breast cancer (MDA-MB-231) and melanoma (A-375) cell lines. Additionally, qPCR and flow cytometry were used to assess apoptosis gene expression ratios (Bax/Bcl-2) and levels of apoptosis.ResultsCitral (80.98%) was identified as the major component of the EO. Alginate nanoparticles containing C. citratus EO and citral (C. citratus-AlgNPs and citral-AlgNPs) were synthesized with particle sizes of 195 ± 4 nm and 222 ± 9 nm, and zeta potentials of -22 ± 3 mV and − 17 ± 1 mV, respectively. Both samples demonstrated significantly greater efficacy under hypoxic conditions. Citral and C. citratus-AlgNPs had IC50 values of 27 (19–39) µg/mL and 25 (4-147) µg/mL, respectively, against MDA-MB-231 and A-375 cells. Flow cytometry showed increased apoptosis under hypoxic conditions, with the highest rates observed for citral-AlgNPs and C. citratus-AlgNPs (84 ± 5 and 92 ± 5% in MDA-MB-231 and A-375 cells, respectively).ConclusionThis study demonstrates that alginate nanoparticles enhance the anticancer activity of C. citratus-AlgNPs and citral, particularly under hypoxic conditions, highlighting their potential for hypoxia-targeted cancer therapies.

Effect of ultraviolet aging and neonicotinoids on the transport of degradable microplastics in saturated porous media

The environmental safety and risk of transporting degradable microplastics (DMPs) and agrochemicals are being actively studied and evaluated. In this study, the aging of polylactic acid (PLA), polyhydroxyalkanoate (PHA), and poly (butylene adipate-co-terephthalate) (PBAT) DMPs were comprehensively explored under ultraviolet (UV) irradiation. The effects of neonicotinoids (acetamiprid, dinotefuran, and nitenpyram) on the transport of DMPs before and after aging were investigated using column experiments and density-functional theory. PHA exhibited stronger resistance to UV degradation than PLA and PBAT owing to its higher hydrophobicity. During aging, ester groups (C–O) were broken in the DMPs and carbonyl groups (C=O) were formed. The calculated molecular electrostatic potential and localized orbital locator as well as the measured zeta potential, verified that the adsorption of neonicotinoids on the DMPs supplemented their surface charge at lower neonicotinoid concentrations, but effectively shielded it at high concentrations. The promoting effect of UV aging on transport was approximately equal for PLA and PBAT but lower for PHA. With the increasing degree of aging, the inhibitory effect of neonicotinoids on DMP recovery became more pronounced. Neonicotinoids, especially dinotefuran, had the most prominent inhibitory effect on the transport of aged PLA and PBAT, with the recoveries of PLA and PBAT UV-aged for 24 h reduced by 38.63% and 34.18%, respectively. These results indicate that the potential ecological hazards arising from the aging and transport of DMPs in the actual environment deserve further investigation.

Encapsulation of Dexamethasone into mRNA–Lipid Nanoparticles Is a Promising Approach for the Development of Liver-Targeted Anti-Inflammatory Therapies

The objective of this study was to develop two lipid nanoparticle (LNP) formulations capable of efficiently expressing a reporter mRNA while co-delivering the anti-inflammatory drug dexamethasone (DX) to reduce inflammatory side effects in protein replacement therapies. Two types of LNPs were developed, in which 25% of cholesterol was replaced by DX. These LNPs contained either 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) or 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) as a helper lipid. The resulting LNPs exhibited high stability, homogeneity, and near-neutral Zeta potentials. SAXS experiments confirmed DX incorporation into the LNP core, with slow in vitro DX release observed over 48 h. The LNPs achieved high mRNA encapsulation efficiency (95–100%) and effectively transfected HepG2 cells, dendritic cells, and hPBMCs. While LNPs increased cytokine release (IL-1β, TNF-α, MCP-1), LNPs-DX significantly reduced cytokine levels, demonstrating enhanced anti-inflammatory properties while maintaining mRNA expression levels. In vivo biodistribution showed predominant liver localization post-intramuscular injection, regardless of the DSPC or DOPE composition. LNPs co-loaded with mRNA and DX are promising candidates for continuous protein replacement. Due to their ability to reduce treatment-related inflammation while maintaining significant mRNA expression levels, these LNPs are perfectly suited for the treatment of liver-related metabolic diseases.

Oral Active Carbon Quantum Dots for Diabetes

Background/Objectives: Metformin (Met), an oral drug used to treat type II diabetes, is known to control blood glucose levels. Metformin carbon quantum dots (MetCQDs) were prepared to enhance the bioavailability and effectiveness of metformin. Several studies have shown that carbon quantum dots (CQDs) have attractive properties like small particle size, high penetrability, low cytotoxicity, and ease of synthesis. CQDs are made from a carbon source, namely, citric acid, and a heteroatom, such as nitrogen. The active molecule can be a carbon source or a heteroatom, as reported here. Methods: This study aims to produce MetCQDs from an active molecule. MetCQDs were successfully produced by microwave-based production methods and characterized. The effect of the MetCQDs was tested in Wistar albino rats following a Streptozocin-induced diabetic model. Results: The results show that the products have a particle size of 9.02 ± 0.04 nm, a zeta potential of −10.4 ± 0.214 mV, and a quantum yield of 15.1 ± 0.045%. Stability studies and spectrophotometric analyses were carried out and the effectiveness of MetCQDs evaluated in diabetic rats. The results show a significant reduction in blood sugar levels (34.1–51.1%) compared to the group receiving only metformin (37.1–55.3%) over a period of 30 to 360 min. Histopathological examinations of the liver tissue indicate improvement in the liver health indicators of the group treated with MetCQDs. Conclusions: Based on these results, the products have potential therapeutic advantages in diabetes management through their increased efficacy and may have reduced side effects compared to the control group.

Fully Atom-Efficient Solvent-Mediated Biopolymer Manufacturing: A Base Case Illustrated with Macromolecular Surfactants Tailored to Stable Polymer-Water Interfaces.

This work introduces a novel 1-pot, 0-waste, 0-VOC methodology for synthesizing polymeric surfactants using acrylated epoxidized soybean oil and acrylated glycerol as primary monomers. These macromolecular surfactants are synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization, allowing for tunable hydrophilic-lipophilic balance (HLB) and ionic properties. We characterize the copolymers' chemical composition and surface-active properties, and evaluate their effectiveness in forming and stabilizing emulsions of semiepoxidized soybean oil and poly(acrylated epoxidized high oleic soybean oil). Comprehensive analyses, including gel permeation chromatography, nuclear magnetic resonance spectroscopy, dynamic light scattering, particle size distribution, zeta potential, and critical micelle concentration, provide detailed insights into the copolymers and the emulsions they form. The results demonstrate that the RAFT-polymerized surfactants offer long-lasting stability and effectively disperse both common oil-in-water emulsions and highly viscous and hydrophobic polymer latexes. These surfactants outperform traditional small molecule surfactants by reducing particle size and preventing phase separation, even over extended storage periods. Stable polymer-water interfaces are achieved through HLB control, tailored by monomer composition, and the final product requires no additional purification since polymerization occurs in liquid surfactants. While small molecules contribute to rapid micelle formation, the polymeric components enhance long-term stability through steric repulsion and slower dynamics. This method enables even the emulsification of polymers with submicron particle size, which ordinarily requires emulsion polymerization. Integrating biobased polymeric surfactants with advanced polymer processing techniques opens new possibilities for transforming highly hydrophobic polymers into latexes, facilitating downstream applications. This innovation enhances the environmental sustainability of surfactant production and broadens the potential for polymer emulsification technologies. Additionally, the integrated solution-processing approach demonstrated here can be applied to other emerging polymers, where judiciously selected nonvolatile solvents facilitate the polymerization and play a role in the final application.