Yield Of Foxtail Millet Research Articles

Effect of Compound Fertilizer on Foxtail Millet Productivity and Soil Environment.

The effects of balanced fertilization with nitrogen, phosphorus, and potassium (NPK) on foxtail millet productivity and the soil environment under the same conditions of total nutrients have received limited research attention. Therefore, in this study, three balanced fertilization patterns of 27-14-10 (T1), 27-17-7 (T2), and 30-10-11 (T3), and one no fertilization treatment (CK), a total of four treatments, were set up through a two-year field experiment to study the effects of balanced fertilization patterns on foxtail millet yield and soil environment. Mantel analysis was conducted to reveal the correlation between soil environmental factors and the community and their contribution to productivity. The results showed that: (1) all balanced fertilization treatments significantly increased foxtail millet yield, with the highest yield in the T1 treatment. (2) The contents of EC, available K, available P, and alkaline-hydrolyzable nitrogen in the soil of the two-year TI treatments were higher than those of the other treatments and increased by 7.20-9.36%, 24.87-52.35%, 55.83-56.38%, and 21.05-43.95%, respectively, compared with CK. (3) Soil urease activity in the T1 treatment increased significantly by 26.67% and 9.00% compared with the control over the two years. Sucrase activity increased by 36.27% and 23.88% in the T1 treatment compared to CK, and glutaminase activity increased by 33.33% and 19.23% in the T1 treatment compared to CK. (4) T1 treatment significantly increased the OUT number and diversity index of the soil bacterial community. (5) Mantel analysis and principal component analysis showed that available soil nutrients and soil enzymes were positively correlated, and soil enzymes and soil nutrients contributed more to foxtail millet productivity. In this study, the 27-14-10 balanced fertilization pattern was more effective, providing a theoretical basis for the research and development of special fertilizers for foxtail millet and offering technical guidance for realizing the light simplified cultivation of foxtail millet and sustainable development of cost-saving and increased efficiency.

Effect of different tillage and crop residue retention practices on growth and yield of foxtail millet and greengram under rainfed condition

Effect of different tillage and crop residue retention practices on growth and yield of foxtail millet and greengram under rainfed condition

Maize-Straw Biochar Enhances Soil Properties and Grain Yield of Foxtail Millet in a Newly Reclaimed Land

Large-scale land reclamation has become common in northwestern China; however, low soil fertility and poor soil water-holding capacity limit agricultural production on these reclaimed lands, requiring increased fertilizer and irrigation inputs. Biochar, produced from agricultural waste, has shown potential in improving soil quality and water-holding capacity. In this two-year field study (2021 and 2022), we investigated the effects of biochar produced from maize straw on soil properties and grain yield of foxtail millet grown on newly reclaimed land. Three biochar treatments (3000, 4500, and 6000 kg ha−1) were compared to a control (CK) with no biochar application. Biochar application resulted in increased soil organic matter, total phosphorus, total nitrogen, soil enzyme activity, and soil organic acid content. It also significantly decreased soil pH and bulk density. Compared with the CK, biochar increased available nitrogen from 29.7% to 108% in 2021 and 37.0% to 88.4% in 2022. Similarly, biochar increased available phosphorus from 64.7% to 143% in 2021 and 41.9% to 96.5% in 2022. Grain yields ranged from 3092 to 4753 kg ha−1. Biochar treatments increased grain yield compared to the CK, ranging from 12.2% to 24.6% in 2021 and 27.1% to 53.7% in 2022. Correlation analysis revealed that soil pH was negatively related to soil oxalic acid content, phosphorus content, and sucrase activity. Available nitrogen and phosphorus contents were negatively related to soil bulk density and positively related to catalase activity. Soil water content was negatively correlated with soil bulk density and positively correlated with organic matter. In conclusion, biochar improved the rhizosphere soil pH and the effectiveness of soil fertility in the newly reclaimed soil, resulting in an enhanced grain yield of foxtail millet.

Evaluation of Nitrogen Fertilizer Supply and Soil Nitrate Thresholds for High Yields of Foxtail Millet

Foxtail millet is an important cereal crop in the North China Plain. However, excessive nitrogen fertilizer application over the years has led to declining yield and soil quality. This study investigated nutrient management strategies for foxtail millet based on crop yield levels and soil nutrient availability. In a field where targeted fertilization was conducted over six seasons, nitrogen fertilization effects and the dynamics of soil-available nitrogen were monitored continuously for two consecutive years (2022–2023) across five different foxtail millet varieties with varying yield levels. The study aimed to determine the optimal nitrogen application rate for achieving a high yield of foxtail millet, the minimum soil nitrate threshold required to maintain soil fertility, and the effective nitrogen application rate range for sustaining soil-available nitrate levels. Results showed that fertilization significantly affected dry matter weight during flowering, while variety affected dry matter weight at maturity. The average nitrogen application rate for achieving high yield across all five millet varieties was 141.3 kg·ha−1. Specifically, the average nitrogen application rate of nitrogen-efficient varieties achieving high yield (5607.32–5637.19 kg·ha−1) was 151.5 kg·ha−1, while the average nitrogen application rate of nitrogen-inefficient varieties achieving high yield (4749.77–4847.74 kg·ha−1) was 134.5 kg·ha−1. Soil NH4+-N and NO3−-N content increased when nitrogen application rate exceeded 360 kg·ha−1, posing environmental risks. To achieve high yield, soil nitrate levels would be maintained at an average of 17.23 mg·kg−1 (before sowing) and 9.75 mg·kg−1 (at maturity). A relationship between soil nitrate and nitrogen application rate was established: y = 867.5 − 50z (where y represents the optimal nitrogen application rate for high yield (kg·ha−1), and z represents soil NO3−-N content in the 0–20 cm layer before sowing, ranging from 10.0 to 17.35 mg·kg−1), which provided a practical method for nitrogen fertilization to achieve high yield of foxtail millet. In this study, the fertilization strategy was optimized according to soil nutrient level and yield targets, and the nitrogen application rate was controlled within 360 kg·ha−1 based on the soil nitrate nitrogen content, which will be instructive for reducing fertilizer use, maximizing fertilizer efficiency, and increasing yield.

Transcriptome analysis and characteristics of drought resistance related genes in four varieties of foxtail millet [Setaria italica]

Foxtail millet [Setaria italica] plays a crucial role as a multigrain crop in agricultural production. However, due to future extreme weather conditions, drought remains the main abiotic stress that limits foxtail millet yield, it is highly significant to screen for drought-tolerant varieties throughout the entire growth period and identify the regulatory genes associated with drought resistance in foxtail millet breeding. We identified 217 foxtail millet seed resources for drought resistance during the maturity stage in the field, and subsequently categorized them into different levels of drought resistance. Two cultivars with extremely strong drought resistance during the maturity stage in the field, JKH4 (Chi 5422) and JKH6 (Chigu 26), as well as two cultivars with extremely weak drought resistance during the maturity stage in the field, JRK3 (17M1309) and JRK6 (Canggu 9), were selected for physiological comparison and transcriptome sequencing before and after drought treatment. Transcriptome analysis at the seedling stage revealed that JRK3 and JRK6 cultivar primarily regulated phenylpropanoid biosynthesis, MAPK signaling pathogen-plant, and plant hormone signal transduction pathway in response to drought stress. On the other hand, the fatty acid elongation pathway of JKH4 and JKH6 variety was found to be more significant. Furthermore, 22 drought resistance related genes were screened through transcriptome analysis of four foxtail millet varieties. These findings could offer valuable theoretical guidance for breeding foxtail millet with enhanced drought resistance and potentially facilitate the development of genetically engineered drought-resistant foxtail millet varieties.

Genome-Wide Identification of microRNAs Associated with Starch Biosynthesis and Endosperm Development in Foxtail Millet.

Foxtail millet is one of the oldest crops, and its endosperm contains up to 70% of starch. Grain filling is an important starch accumulation process associated with foxtail millet yield and quality. However, the molecular mechanisms of grain filling in foxtail millet are relatively unclear. Here, we investigate the genes and regulated miRNAs associated with starch synthesis and metabolism in foxtail millet using high-throughput small RNA, mRNA and degradome sequencing. The regulation of starch synthesis and quality is carried out mainly at the 15 DAA to 35 DAA stage during grain filling. The DEGs between waxy and non-waxy foxtail millet were significant, especially for GBSS. Additionally, ptc-miR169i_R+2_1ss21GA, fve-miR396e_L-1R+1, mtr-miR162 and PC-5p-221_23413 regulate the expression of genes associated with the starch synthesis pathway in foxtail millet. This study provides new insights into the molecular mechanisms of starch synthesis and quality formation in foxtail millet.

Genome-Wide Characterization and Haplotypic Variation Analysis of the IDD Gene Family in Foxtail Millet (Setaria italica).

The indeterminate domain proteins (IDD proteins) play essential roles in the growth and development of various plant tissues and organs across different developmental stages, but members of this gene family have not yet been characterized in foxtail millet (Setaria italica). To have a comprehensive understanding of the IDD gene family in foxtail millet, we performed a genome-wide characterization and haplotypic variation analysis of the IDD gene family in foxtail millet. In this study, sixteen IDD genes were identified across the reference genome of Yugu1, a foxtail millet cultivar. Phylogenetic analysis revealed that the Setaria italica IDD (SiIDD) proteins were clustered into four groups together with IDD proteins from Arabidopsis thaliana (dicot) and Oryza sativa (monocot). Conserved protein motif and gene structure analyses revealed that the closely clustered SiIDD genes were highly conserved within each subgroup. Furthermore, chromosomal location analysis showed that the SiIDD genes were unevenly distributed on nine chromosomes of foxtail millet and shared collinear relationships with IDD genes of other grass species. Transcriptional analysis revealed that the SiIDD genes differed greatly in their expression patterns, and paralogous genes shared similar expression patterns. In addition, superior haplotypes for two SiIDD genes (SiIDD8 and SiIDD14) were identified to correlate with traits of early heading date, and high thousand seed weight and molecular markers were designed for SiIDD8 and SiIDD14 to distinguish different haplotypes for breeding. Taken together, the results of this study provide useful information for further functional investigation of SiIDD genes, and the superior haplotypes of SiIDD8 and SiIDD14 will be particularly beneficial for improving heading date and yield of foxtail millet in breeding programs.

Rotation with Soybean Improved Weed Control and Foxtail Millet Yield

Foxtail millet is an important characteristic grain crop in northern China. However, weeds compete seriously with foxtail millet and have long been a biological factor that has plagued foxtail millet production. Rotation requires determining the species and sequence of crops, and reasonable rotation has many benefits for agriculture, including reducing the damage by weeds. In order to clarify the combination effects of foxtail millet–soybean rotation sequence and herbicide on weed control and crop yield, fixed-position experiments were designed in three growing seasons. Foxtail millet and soybean were planted following the sequence below in successive years (FFF, foxtail millet–wheat–foxtail millet–wheat–foxtail millet; SFF: soybean–wheat–foxtail millet–wheat–foxtail millet; SSF, soybean–wheat–soybean–wheat–foxtail millet; SSS, soybean–wheat–soybean–wheat–soybean), and weed density, biodiversity, weed seedbank, and crop yield were examined and analyzed. The results showed that the average weed density of SFF and SSF was reduced by 61.7% and 66.3% compared with FFF in the three years and by 16.5% and 26.6% compared with SSS, separately. Foxtail millet–soybean rotation (SFF and SSF) increased the species richness and the Margalef species richness index of the weed community and reduced the Simpson index compared with the continuous foxtail millet and the continuous soybean cropping (FFF and SSS). The weed seedbank of SFF and SSF was 45.7% and 55.8% smaller than that of FFF and increased by 92.7% and 56.7% compared with SSS, respectively. The weed density in the FFF treatment was significantly correlated with the 0–5 cm grass seedbank size, while there was no significant correlation in the other three treatments. Benefiting from the lower weed damage intensity, the yield of foxtail millet in SFF and SSF increased by 54.05% and 221.81% compared with FFF, respectively. The research results revealed that both SFF and SSF can effectively reduce the damage of weeds and help improve biodiversity. SSF has a higher weed control effect and higher foxtail millet yield than SFF. This study contributes to the understanding of crop–weed interactions in foxtail millet–soybean rotation and can be applied to areas with similar environments.

Effect of spacing and nitrogen on growth and yield of foxtail millet (Setaria italica L.)

Effect of spacing and nitrogen on growth and yield of foxtail millet (Setaria italica L.)

Effect of Nutrient Management on Growth and Yield of Foxtail Millet

The field experiment was conducted during ZAID season 2023 at experimental field of Crop Research Farm, Sam Higginbottom University of Agriculture, Technology and Sciences, Prayagraj, Uttar Pradesh, India. In the present study, the treatments consisting three levels of recommended dose of fertilizer (RDF) viz., 100% RDF (60-30-30 Kg/ha), 75% RDF (45-22.5-22.5 Kg/ha) and 50% RDF (30-15-15 kg/ha) along with three different micro nutrients viz., Zinc - 0.5 kg/ha, Boron - 0.5 kg/ha and Iron - 0.5 kg/ha. The experiment was laid out in a randomized block design with 10 treatments each replicated thrice. The soil of experimental plot was sandy loam in texture, nearly neutral in soil reaction (pH 7.3), low available nitrogen (278.93 kg/ha), medium available phosphorus (15.4 kg/ha) and medium available potassium (173.7 kg/ha). Results revealed that higher plant height (84.20 cm), plant dry weight (10.61 g), number of tillers/ hill (4.53), length of ears (9.20 cm), number of ears/plant (4.47), test weight (3.47 g), grain yield (1.22 t/ha), straw yield (2.80 t/ha) were recorded in treatment 8 (NPK 100% RDF+ Boron 0.5 kg/ha). Maximum gross return (INR 48,408.33), net return (INR 30,913.33) and B:C ratio (1.77) were also recorded in treatment 8 (NPK 100% RDF + Boron 0.5 kg/ha). It can be concluded that the application of NPK 100% RDF +Boron 0.5kg/ha (Treatment 8) recorded higher yield and benefit cost ratio in Foxtail millet.

Allelopathic Effects of Corn Straw and Its Water Extracts on Four Weed Species and Foxtail Millet.

Straw covering is a protective tillage measure in agricultural production, but there is relatively little research on the allelopathic effects of corn straw on weeds and foxtail millet. This experiment studied the allelopathic effects of corn straw on four weeds (Chenopodium album, Setaria viridis, Echinochloa crus-galli and Amaranthus retroflexus) in foxtail millet fields, and also measured the growth indicators of foxtail millet. The study consisted of Petri dish and field experiments. Five treatments were used in the Petri dish experiment: clear water as control (0 g/L, TCK) and four types of corn straw water extracts. They were, respectively, the stock solution (100 g/L, T1), 10 X dilution (10 g/L, T2), 50 X dilution (2 g/L, T3), and 100 X dilution (1 g/L, T4) of corn straw water extracts. Additionally, seven treatments were set up in the field experiment, consisting of three corn straw covering treatments, with covering amounts of 3000 (Z1), 6000 (Z2) and 12,000 kg/ha (Z3), and four control treatments-one treatment with no corn straw cover (CK) and three treatments involving the use of a black film to create the same shading area as the corn straw covered area, with black film coverage areas of 50% (PZ1), 70% (PZ2), and 100% (PZ3), respectively. The results showed that the corn straw water extract reduced the germination rate of the seeds of the four weeds. The T1 treatment resulted in the allelopathic promotion of C. album growth but the inhibition of S. viridis, E. crus-galli, and A. retroflexus growth. Treatments T2, T3, and T4 all induced the allelopathic promotion of the growth of the four weeds. The order of the effects of the corn straw water extracts on the comprehensive allelopathy index of the four weed seeds was as follows: C. album > S. viridis > A. retroflexus > E. crus-galli. With an increase in the corn straw mulching amount, the density and total coverage of the four weeds showed a gradual downward trend, whereas the plant control effect and fresh weight control effect showed a gradual upward trend. All indices showed the best results under 12,000 kg/ha of mulching and returning to the field. Overall, corn straw coverage significantly impacted the net photosynthetic rate and transpiration rate of foxtail millet and increased the yield of foxtail millet. Under coverages of 6000 and 12,000 kg/ha, the growth of foxtail millet is better. Based on our findings, we recommend a corn straw coverage of 12,000 kg/ha for the allelopathic control of weeds in foxtail millet fields.

Potassium humate supplementation improves photosynthesis and agronomic and yield traits of foxtail millet

Foxtail millet is a highly nutritious crop, which is widely cultivated in arid and semi-arid areas worldwide. Humic acid (HA), as a common plant growth regulator, is used as an organic fertilizer and feed additive in agricultural production. However, the impact of potassium humate KH on the photosynthetic rate and yield of foxtail millet has not yet been studied. We explored the effects of KH application on the morphology, photosynthetic ability, carbon and nitrogen metabolism, and yield of foxtail millet. A field experiment was performed using six concentrations of KH (0, 20, 40, 80, 160, and 320 kg ha−1) supplied foliarly at the booting stage in Zhangza 10 cultivar (a widely grown high-yield variety). The results showed that KH treatment increased growth, chlorophyll content (SPAD), photosynthetic rate (Pn), transpiration rate (Tr), and stomatal conductance (Gs). In addition, soluble protein content, sugar content, and nitrate reductase activity increased in KH-treated plants. With increased KH concentration, the effects became more evident and the peak values of each factor were achieved at 80 kg ha−1. Photosynthetic rate showed significant correlation with SPAD, Tr, Gs, and soluble protein content, but was negatively correlated with intercellular CO2 concentration. Compared to that of the control, the yield of foxtail millet under the T2, T3, T4, and T5 (40, 80, 160, and 320 kg ha−1 of KH) treatments significantly increased by 6.0%, 12.7%, 10.5%, and 8.6%, respectively. Yield exhibited a significant positive correlation with Tr, Pn, and Gs. Overall, KH enhances photosynthetic rate and yield of foxtail millet, therefore it may be conducive to stable millet production. These findings may provide a theoretical basis for the green and efficient production of millet fields.

Effects of Different Organic Fertilizer Substitutions for Chemical Nitrogen Fertilizer on Soil Fertility and Nitrogen Use Efficiency of Foxtail Millet

Conventional fertilizer management can destroy the structure of soil. Replacing chemical fertilizers with organic fertilizers can improve soil quality and nitrogen use efficiency. We aimed to study the effects of organic fertilizer substitutions for chemical nitrogen fertilizer on soil fertility and nitrogen use efficiency in order to clarify the effectiveness of the available nutrient management measures in improving soil quality and increasing foxtail millet yield. A field experiment was carried out over two consecutive years, and a total of six treatments were set up: no fertilizer (CK), chemical nitrogen fertilizer alone (N), the substitution of 25% of chemical nitrogen fertilizer with bio-organic fertilizer (N25A1), the substitution of 25% of chemical nitrogen fertilizer with fermented mealworm manure (N25B1), the substitution of 50% of chemical nitrogen fertilizer with bio-organic fertilizer (N50A2), and the substitution of 50% of chemical nitrogen fertilizer with fermented mealworm manure (N50B2). The results of this study show the following: (1) Compared with chemical nitrogen fertilizer, the substitution of organic fertilizer for nitrogen fertilizer reduced the bulk density and solid phase of the soil, and it increased the total porosity, water content, liquid phase, and gas phase of the soil. (2) Compared with nitrogen fertilizer, the use of an organic fertilizer increased the contents of nitrate nitrogen, ammonium nitrogen, and total nitrogen in the soil by 13.59~52.56%, 4.47~18.27%, and 4.40~12.09%, respectively. The content of alkaline nitrogen increased by 1.70~32.37%, and the contents of soil available potassium, available phosphorus, and organic matter also increased. (3) The activities of sucrase, urease, glutaminase, and asparaginase were improved by replacing chemical nitrogen fertilizer with organic fertilizer. The N25 treatments performed better than the N50 treatments, and fermented mealworm manure performed better than biological organic fertilizer. (4) A moderate application of organic fertilizer (N25) can increase the grain yield, ear weight, grain weight, and 1000-grain weight of foxtail millet, whereas excessive application of organic fertilizer (N50) can reduce foxtail millet yield. (5) Replacing chemical nitrogen fertilizer with organic fertilizer can improve the agronomic use efficiency, physiological efficiency, biased productivity, harvest index, and apparent use efficiency of nitrogen fertilizer. In this study, the substitution of 25% of chemical nitrogen fertilizer with fermented mealworm manure was the best combination for restoring crop productivity and soil quality.

Biofertilizers and chemical fertilizer application for increasing the growth and yield of foxtail millet (Setaria italica (L.) P. Beauv.) in a pot experiment

Biofertilizers are recommended to improve crops yield but researches regarding biofertilizer inoculation on foxtail millet in Indonesia is still Tlimited. The objective of the experiment was to analyze the growth and yield responses of five local-millet accessions to Bacillus biofertilizer with reduced NPK fertilizer dose; and the germination rate of millet seeds. The pot experiment was arranged in randomized block design with 10 treatments and 10 replications. The treatments were combination of five millet accessions with one dose of NPK fertilizer, and half dose of NPK fertilizer with biofertilizer. Generally, half dose of NPK with Bacillus inoculation did not change the height of six-weeks old plant, and panicle weight and length of millet compared to one dose of NPK. However, this combined fertilizer increased plant height and panicle length of Mani-Mani 79. Reduced dose NPK with Bacillus inoculation increased panicles number of J3 but reduced that of Polman 3; moreover, this combined fertilizer increased the grain weight of J3 and J4, but decreased the yield of Polman 3. The Enrekang and Polman 3 accession had better germination rate; 92% and 89.33%, respectively. This research considered that Bacillus biofertilizer reduced NPK fertilizer dose by 50% and is suggested for growing millet.ABSTRAKPupuk hayati banyak disarankan untuk meningkatkan produksi tanaman tetapi riset mengenai inokulasi pupuk hayati pada jewawut aksesi lokal Indonesia belum banyak dilakukan. Percobaan ini bertujuan untuk menganalisis respons pertumbuhan dan hasil lima aksesi jewawut lokal terhadap inokulasi pupuk hayati Bacillus dan pengurangan dosis pupuk NPK; serta daya berkecambah biji jewawut setelah panen. Percobaan pot disusun dalam rancangan acak kelompok dengan 10 perlakuan dan 10 ulangan. Perlakuan percobaan adalah kombinasi lima aksesi jewawut dengan satu dosis pupuk NPK, dan setengah dosis pupuk NPK disertai pupuk hayati. Umumnya, tinggi tanaman umur enam minggu, serta bobot dan panjang malai jewawut dengan setengah dosis NPK disertai inokulasi Bacillus sama dengan tanaman yang diberi satu dosis NPK. Namun, tinggi tanaman dan panjang malai Mani-Mani 79 meningkat setelah aplikasi setengah dosis NPK dengan inokulasi Bacillus. Jumlah malai aksesi J3 meningkat sedangkan Polman 3 menurun dengan aplikasi setengah dosis NPK disertai inokulasi Bacillus. Kombinasi pupuk ini meningkatkan bobot biji J3 dan J4 tetapi menurunkan hasil Polman 3. Aksesi Enrekang dan Polman 3 memiliki daya berkecambah yang lebih baik; masing-masing sebesar 92% dan 89,33%. Penelitian ini menunjukkan bahwa pupuk hayati Bacillus dapat mengurangi dosis pupuk NPK sampai 50% dan dapat disarakan untuk tanaman jewawut.

Characterization of nutritional components of foxtail millet (Setaria italica (L.) P. Beauv) cv. Jingu 21 cultivated in soil with different nutrient contents in China

Foxtail millet, one of the earliest cultivated crops in the world, regarded as important food in Africa and Asia due to its high nutritional value. Cultivation locations could affect the yield of foxtail millet, but its effects on nutrient contents is unclear. In this study, soil samples were collected from eight locations in Shanxi province, China, and the relationship between soil nutrients and nutritional contents (i.e., essential amino acids, minerals and α-tocopherol contents) of millet was investigated. The results demonstrated that higher soil N and P in soil resulted in higher contents of threonine (210–687 mg/100 g), valine (426–579 mg/100 g), leucine (999–1522 mg/100 g), isoleucine (416–618 mg/100 g), phenylalanine (542–753 mg/100 g), and α-tocopherol (3.30–10.6 mg/100 g) in millet, while soil nutrients did not significantly affect Mg contents. Based on principal component analysis (PCA), millet form eight locations could be separated into three clusters according to soil nutrients and millet nutritional contents. Interestingly, the PCA clusters closely correlated with the geographical features of the cultivation locations. This study expands the knowledge on the roles of soil N, P, K in improving the nutritional contents of millet and provides information on choosing suitable soil conditions for cultivation management of millet to enhance its nutritional quality.

Effects of mycorrhiza and phosphate fertilizers on the growth and yield of foxtail millet (Setaria italica L.) under drought stress conditions

Millet is a cereal plant that’s potential for rice substitution. This plant is adaptive to be cultivated in dry land but has a tolerance limit to drought stress. Mycorrhiza and phospate (P) fertilizer treatments help plants adapt to this condition. This study aimed to determine the effects of phosphate fertilizer and mycorrhiza as well as their interaction effects on the growth and yield of foxtail millet (Setaria italica L.) under drought stress. The experiment was carried out from January to June 2020 in the experimental farm, Faculty of Agriculture, University of Jenderal Soedirman. The research was arranged in a factorial randomized complete block design consisting of two factors. The first factor was the dose of SP-36 fertilizer per polybag, namely P0 = 0 g, P1 = 37,5 kg.ha⁻¹ (25%), P2 = 75 kg.ha⁻¹ = 0.88 g/polybag (50%), and P3 = 150 kg.ha⁻¹. The second factor was the dose of mycorrhiza biofertilizer, namely M0 = 0 g.polibag⁻¹, M1 = 33.3 g. polibag⁻¹ and M2 = 66.6 g.polybag⁻¹. The treatment was replicated three times. The data observed were analyzed using the F test, continued with DMRT test at p=0.05. The results showed that SP-36 fertilizer application at half of the recommended dose (0.88 g/polybag) could increase growth variables, such as leaf area, panicle length, and seed weight. Mycorrhizae application 33.3 g/polybag could improve variables such as plant height, leaf area, panicle length, and seed weight. It also accelerated the initiation of panicle emergence compared to control.

Response of Quality and Yield of Foxtail Millet to Nitrogen and Zinc Application

The effect of nitrogen and zinc treatment on quality and yield was studied to provide a theoretical basis for generating high-quality and high-yielding foxtail millet. In the years 2021–2022, ‘Jingu 21’ was utilized as the test material in a split-plot design. The main plot was subjected to nitrogen treatment, while the sub-plot was treated with zinc. An arrangement of random blocks was employed. Four levels of nitrogen application (0 kg/hm2, 120 kg/hm2, 180 kg/hm2, 240 kg/hm2) and three levels of zinc application (20 mg/L, 40 mg/L, 80 mg/L foliar spraying) were set, resulting in a total of twelve treatments. Each treatment was replicated three times, with each plot covering an area of 15 m2. (1) The findings indicated that the contents of crude fat and crude protein in foxtail millet increased initially and then decreased with the increase in nitrogen application concentration. Additionally, the protein components were found to be in the following order: gliadin > albumin > glutenin > globulin. (2) Adding an appropriate amount of nitrogen fertilizer under the same zinc level promoted the contents of amylose, total carotenoids, and flavonoids in millet to some extent. Over the course of two years, the content of flavonoids in millet was highest when treated with N180Zn40 (nitrogen 180 kg/hm2, zinc 40 mg/L), showing an increase of 50.14% and 58.67%, respectively, compared to the treatment of applying zinc fertilizer alone at the same zinc level. (3) The phytic acid content and phytic acid/zinc molar ratio exhibited a pattern of initially decreasing and then increasing with the rise in nitrogen and zinc concentrations. (4) The application of zinc fertilizer and increased nitrogen fertilizer for two consecutive years had a significant impact on the yield of millet. Additionally, the application of zinc fertilizer had a highly significant effect on both the ear weights and thousand-kernel weights of millet (p < 0.001). The results demonstrated a positive synergistic effect when nitrogen fertilizer and zinc fertilizer were applied together. This combination significantly improved millet yield and thousand-kernel weights, enhanced the nutritional quality, and increased the content of functional components. Additionally, it also improved the availability of zinc.

Potassium Increases Nitrogen and Potassium Utilization Efficiency and Yield in Foxtail Millet

Field experiments were conducted to investigate the effects of K application on the nitrogen and potassium utilization efficiency and yield of foxtail millet (Setaria italica L.). The experiment was performed with a completely randomized design with two millet cultivars (Jingu 21 and Zhangza 10) and five K2O rates (0, 60, 120, 180, and 240 kg/hm2) in 2020 and 2021. We found that K promoted K and N absorption; significantly increased dry matter (DM), N, and K accumulation in millet organs; caused dry matter accumulation to peak earlier; and increased the DM accumulation rate. In addition, K accumulation preceded that of DM or N. Relative to the crop cycle, most K (61.07%) accumulated at booting, whereas N accumulated mostly (33.86%) during grain filling. N absorption efficiency increased by 31.87%, and the apparent and agronomic utilization rate of K fertilizer remained high, increasing millet yield, which peaked at a K rate of 180 kg/hm2 for both cultivars, by 29.91% and 31.51% in Jingu 21 and Zhangza 10, respectively, relative to untreated controls. Stepwise regression and path analysis showed that the leaf and spike K accumulation, stem N accumulation, and stem DM were the main factors affecting yield, with DM having the greatest direct effect, followed by leaf K accumulation. The K concentration (0.77–3.04%) in Zhangza 10 was higher than that in Jingu 21 (0.69–2.91%) in untreated plants. Under the same K application rate, N and K accumulation and the harvest index were higher for Zhangza 10 than those for Jingu 21, and the nutrient utilization ability was greater for Zhangza 10. The results demonstrated that rational K fertilizer application can increase K concentration and accumulation in leaves, promote N metabolism and accumulation, increase N and K utilization efficiency, and improve DM accumulation and millet yield.

Influence of Different Nitrogen, Phosphorus, and Potassium Fertilizer Ratios on the Agronomic and Quality Traits of Foxtail Millet

Foxtail millet is highly valued in China; however, its optimal fertilization parameters are unknown. This study investigated the effects of nitrogen (N), phosphorus (P), and potassium (K) fertilizer combinations on foxtail millet agronomic traits, photosynthetic characteristics, yield, and quality to promote rational fertilizer application. Pot experiments were conducted using the “3414” fertilizer effect scheme and the representative crop variety was JG21, containing four NPK levels and 20 replicates per treatment, individually. The effects of N, P, and K levels on agronomic traits were analyzed during the jointing, heading, and filling stages. JG21 performed optimally under treatment with N160P90K150 (T6); the yield and fat content increased by 49.32% and 13% compared to the control. Correlation analysis revealed that N was significantly positively (negatively) correlated with the protein (amylose) content. P was significantly positively correlated with the fat and moisture content and K was correlated with the moisture, fat, and protein content, but was negatively with the amylose content. Overall, rational ratios of NPK fertilization improved foxtail millet yield and quality. Based on fuzzy comprehensive evaluation, the T6 treatment (N160P90K150) demonstrated the highest comprehensive effect among 13 NPK fertilizer combinations. Rational application of NPK in foxtail millet may improve agronomic performance by enhancing leaf photosynthetic efficiency and aboveground biomass accumulation.

Correlation and Regression Studies of Growth, Yield Attributes, Yield and Nutrient Uptake of Foxtail Millet under Different Varieties and Landraces

Aims: To evaluate the “Correlation and Regression Studies of Growth, Yield Attributes and Yield of foxtail millet (Setaria italica L.) Under Different Varieties and Landraces”.
 Place and Duration of Study: The experiment was carried out in the Rabi season of 2022-23 at Experimental farm in Karunya Institute of Technology and Sciences, Coimbatore. Experimental field was silty clay loam in texture with medium in available N (273.0 kg/ha), high in available P2O5 (21.5 kg/ha) and high in available K2O (425.0 kg/ha) and lower level of organic carbon (0.29%).
 Study Design: Randomized Block Design (RBD).
 Methodology: The treatments consisted of 8 foxtail millet varieties and landraces viz., T1 - ATL-1 (Control), T2 - SiA-3222 (Garuda), T3 - SiA-3088 (Suryanandhi), T4 - SiA-3085, T5 - SiA-3156, T6 - SiA-3233 (Reynaudu), T7 - Mookanthathinai and T8 - Koranthinai.
 Results: Grain yield was highly significant positive correlation with N uptake (r = 0.996**), DMP at harvest stage (r = 0.984**), K uptake (r = 0.981**), P uptake (r = 0.966**) and straw yield (r = 0.954**). From the regression, N uptake (R2 = 0.993**), DMP (R2 = 0.968**) at harvest is the important positive component of grain yield in foxtail millet followed by K uptake (R2 = 0.962**), P uptake (R2 = 0.934**) and straw yield (R2 = 0.911**).
 Conclusion: From the result of correlation and regression, it was concluded that in terms of grain yield, the foxtail millet varieties and landraces are influenced by the DMP at harvest stage, N uptake, K uptake, P uptake and Straw yield.