Flower Yield Research Articles

Screening of Chrysanthemum Cultivars for their Tolerance against Sucking Pests in Terai Region of West Bengal, India

Chrysanthemum (Chrysanthemum morifolium Ramat.) is an important commercial flowering crop. This plant is often invaded by sucking pests like aphids, mealybugs and mites causing severe damage to the quality and quantity of flower yield. Searching for tolerant cultivars against these pests constitutes one of the most cost-effective pest management strategies. An experiment was conducted at Uttar Banga Krishi Viswavidyalaya, Pundibari, India to find out the reaction of forty different genotypes of spray chrysanthemum to aphids, mealybugs and mites. The results indicated that the genotypes exhibited significant variations in harbouring number of all the three sucking pests and the per cent plant infestation by aphids and mealybugs also varied significantly. The variation in pest infestation may be attributable to the genetic traits of these chrysanthemum cultivars. Out of all the genotypes tested the varieties Yellow Baby, Arka Kirti and Arka Yellow Gold were found to be the most tolerant against all the sucking pests and therefore, may be recommended for cultivation in the Terai agroclimatic region of West Bengal.

Unveiling the Spectacular Performance of Diverse Chrysanthemum Varieties in Flowering, Quality and Yield

A comprehensive research initiative conducted in Jhalawar 2019-20 focused on evaluating the genetic diversity and performance of various chrysanthemum varieties. The aim of this study was to evaluate the genetic variability and assess the varietal performance of chrysanthemum (Dendranthema grandiflora Tzvelev) under the specific agro-climatic conditions of Jhalawar. The study sought to identify high-performing varieties and quantify key genetic traits relevant to yield and quality characteristics, with the goal of supporting selection efforts for enhanced chrysanthemum production in the region. This investigation was conducted at the Floriculture and Landscaping block of the College of Horticulture and Forestry, Jhalawar, Rajasthan. The experimental work was carried out during the winter season of the year 2019-20, capitalizing on the local climate to evaluate varietal responses under Jhalawar conditions. The experiment employed a Randomized Block Design (RBD) with multiple replications to ensure robust data. Different chrysanthemum varieties were planted in designated plots, and observations on traits such as flower yield, flower quality, and growth parameters were recorded periodically. Statistical analysis, including ANOVA, was performed to detect significant differences among the varieties. This analysis helped in identifying high-performing varieties suited for Jhalawar conditions and provided insights into genetic variability for potential selection and breeding programs. Ten different genotypes were carefully chosen for the study, including Marigold, Poornima Pink, Dall White, Calcutta Shantini, Karnool, Poornima Red, Dall Yellow, Poornima White, Poornima Yellow and Dundi for in-depth analysis.A randomised block design with three replications was used in the experiment. Cultivar 'Calcutta Shantini' exhibited the maximum days taken to first flower bud emergence of plant (51.50 days) and the maximum number of flowers per plant (269.90). Conversely, cv. 'Dall Yellow' showed the shortest duration to fifty percent flowering (67.64 days). Notably, cv. 'Dundi' displayed the maximum flower diameter (7.47 cm), while cv. 'Poornima Pink' had the longest flower stalk (13.09 cm). Remarkably, cv. 'Marigold' demonstrated the highest flower fresh weight (63.67 gm), dry weight (14.41 gm), and shelf life (4.67 day).

Harvesting Light: The Interrelation of Spectrum, Plant Density, Secondary Metabolites, and Cannabis sativa L. Yield

The approaching legalisation and associated increasing demand for medicinal and recreational Cannabis sativa L. will lead to a growing relevance for lighting systems designed for Cannabis sativa L. The interplay between plant density, light spectrum, light distribution, yield, and secondary metabolite distribution within the plant has not yet been studied. To fill this knowledge gap, a CBD-dominant Cannabis sativa L. strain was grown in a greenhouse experiment with two plant densities (2.66 and 12 plants −1 m−2) under two different light spectra. The chosen light spectra were two LED fixtures, Solray385 (SOL) and AP67, with an R: FR ratio of 12.9 and 3.7, respectively. The results indicated that light-induced effects on individual plants can be transferred to the plant stock. A low R: FR ratio induced a 16% increase in dry flower yield in the last ten days of flowering, while a change in the light spectrum could increase the potential maximum plant density per square metre. The two spectra did not affect (CBD + CBDA) yield, as a lower flower yield compensated for a higher concentration. CBDA concentration was not significantly affected by plant density. In contrast, the higher density led to an increased total cannabidiol concentration (CBD + CBDA) and altered the distribution of terpenes. Here, the light distribution over the plant stock is particularly decisive, as a more homogenous illumination led to an increased terpene concentration of up to 41%. A Photon Conversion Efficacy (PCE) of 0.05 g mol−1 under SOL and 0.06 g mol−1 under AP67 was achieved. Plants in the centre under the highest light intensity of 1200 PAR showed up to 48% reduced efficacy. These results strongly suggest that light intensity needs to be fine-tuned to the cultivation system to prevent a reduction in efficacy, resulting in yield and quality losses.

Cut Flower Yields and Qualities of Rosa hybrid L. Affected by Supplementary LED Lighting at Night under High Temperature and Low Light Intensity Conditions

Cut Flower Yields and Qualities of Rosa hybrid L. Affected by Supplementary LED Lighting at Night under High Temperature and Low Light Intensity Conditions

Morphological and molecular characterization of some Chrysanthemum (Dendranthema grandiflora) cultivars

The diversity and genetic relationships among seven commercial chrysanthemum cultivars were analyzed using morphological and molecular markers. Vegetative growth, flowering, flower yield, and flower quality parameters were evaluated to assess genetic variability across the cultivars. Cultivars Crystal Red, Kodiack, and Crystal White exhibited superior vegetative growth, while Abrun, Crystal Red, and Kodiack displayed better flowering characteristics, particularly in terms of the number of inflorescences per plant and mass of colored flowering. Crystal White, Coca Bleach, and Crystal Red cultivars demonstrated the highest inflorescence stalk length, while cvs. Crystal Red, Crystal Yellow, Crystal Pink, and Kodiack Yellow recorded the maximum number of ray floret inflorescences. Other quality parameters such as inflorescence diameter and ray floret length were found to be optimal in Kodiack, Crystal White, Crystal Pink, Coca Bleach, and Crystal Yellow cultivars. Simple Sequence Repeat (SSR) markers were employed to distinguish and identify standard-type chrysanthemum cultivars, utilizing twelve SSR markers from the chrysanthemum SSR database. The results suggest that these SSR markers hold promise for identifying additional chrysanthemum cultivar types and assessing genetic relationships among them. Association studies combining morphological and molecular data offer a valuable approach to identifying informative markers for plant breeding purposes.

Effect of Pinching on Growth, Yield, and Quality of African Marigold (Tagetes erecta L.) cv. Pusa Narangi Gainda

Marigold is a very common and a hardy flower crop cultivated throughout the world. Pinching is an important intercultural practice commonly followed in cultivation of marigold however, this needs to be standardized for getting higher yields in commercial cultivation. Hence, the present investigation was conducted at Rajasthan Agricultural Research Institute, Durgapura, Jaipur, Division of Horticulture, during 2020-21 and 2021-22 to standardize the commercial pinching practice for getting higher productivity. Three levels of pinching (no pinching, single at 20 days and double at 20 and 40 days after transplanting) were used in the course of the research arranged using a factorial randomized block layout with three replications applied to African marigold variety Pusa Narangi Gainda. The results revealed that treatment P0 (No pinching) was discovered to be the finest in increment in height of plant, early flower bud initiation flower opening and treatment P2 (Double pinching) in boosting spread of plant, primary branches, length of leaf, leaf width, leaf area, plant fresh weight, plant dry weight, total biomass, root- shoot ratio, 50% flowering, flower diameter, stalk and ray floret length, fresh and dry flower weight, mass and number of flower per plant, flower yield additionally improved quality characteristics like chlorophyll and xanthophyll content in marigold. Hence, it might be concluded that application of double pinching can be helpful and recommended in improving yield as well as quality characteristics in commercial cultivation of marigold.

Effect of micronutrient formulation on growth and flower yield of annual chrysanthemum

Effect of micronutrient formulation on growth and flower yield of annual chrysanthemum

Morphological characterization and genetic diversity of mini core collection of Rosa damascena from Morocco

Damask rose (Rosa damascena Mill.) is a popular Rosa species cultivated for the industrial production of rose oil worldwide. In the current study, the morphological characteristics and genetic diversity among 12 populations of these species collected from Kelaat M’gouna in Morocco were examined to identify more variable traits and compare their genetic structure. Observations were recorded for a total of 24 morphological traits. The phenotypic variation coefficient (CV) of the studied traits varied from 4.79 % to 42.52 %, confirming the high phenotypic variation between accessions. Cluster analysis grouped accessions into two major clusters based on their morphological resemblance. For molecular investigations, nuclear DNA was amplified using 13 ISSR markers. Analysis of molecular variance (AMOVA) indicated that the highest proportion was within populations (87 %) rather than between them (13 %). Boutaghrar region recorded high values of genetic diversity (He = 0.237), percentage polymorphic loci (PPL = 67 %) and Shannon information index (I = 0.358) Clustering based on Jaccard similarity divided studied the accessions into three distinct clusters. STRUCTURE analysis and principal coordinate analysis (PCoA) were consistent with the genetic relationships derived from cluster analysis. Our study suggests that the wide genetic variation and haplotype observed in Moroccan Damascene roses are valuable for future improvement and conservation of rose programs, particularly for enhancing commercial traits, flower yield, and breeding stability.

Optimizing Organic Fertilization for Marguerite Daisy (Argyranthemum frutescens): Impact of Application Rate and Frequency on Growth and Yield

Edible flowers are a new market for horticulture plants. Beyond their attractive shapes and colors, this group of plants contains secondary metabolites that benefit human health. This study aims to investigate the growth and flower yield of marguerite daisies using organic fertilizer at different rates and frequencies. The experiment was designed as a factorial, completely randomized design with two factors: fertilizer rate (0.5, 1.0, and 1.5 times compared to the total nitrogen content in chemical fertilizer) and frequency of organic fertilizer application (every 30 and 15 days). Slow-release chemical fertilizer (Osmocote 13-13-13) was used as a control. The experiment reveals that the rate of organic fertilizer application significantly affected the growth and flower yield of Marguerite daisy. Still, the frequency of organic fertilizer application did not significantly affect it. Application at 1.5 times yielded the most significant growth and flower production compared to 0.5 and 1 times of application. When comparing the results of organic fertilizer application with 13-13-13 chemical fertilizer, it was found that applying organic fertilizer 1.0 times and 1.5 times every 15 or 30 days resulted in similar plant growth and flower size as with the chemical fertilizer (p>0.05). However, chemical fertilizer produced the highest chlorophyll index (SPAD), accumulated flower buds, and flower blooming per pot (p<0.05). The plant requires more than 1.5 times the organic fertilizer application to achieve flower production equivalent to chemical fertilizer.

Growth-Promoting Bacteria and Salicylic Acid Improve Essential Oil, Flower Yield, And Compatible Osmolyte Content of Common Yarrow (Achillea millefolium L.) Under Drought Stress

Drought is one of the major constraints on agricultural productivity in arid and semiarid regions. Coping with drought stress involves several adaptations and mitigation strategies such as the use of plant-growth promoting bacteria and salicylic acid, which was examined in this study under two levels of water regimes (well-watered as control and drought stress) in southwest Iran in 2018 and 2020 on common yarrow (Achillea millefolium). Catalase levels significantly increased in response to drought stress and salicylic acid application. Salicylic acid and combined application treatment of both bacteria also resulted in a significant increase in proline compared with the control. Different bacteria strains also resulted in a significant increase in peroxidase and superoxide dismutase when compared with the control. Drought stress, salicylic acid application, and different bacteria strains significantly reduced total protein. The use of salicylic acid and the combined application of both bacteria significantly increased the percentage of essential oil compared with the control. Moreover, 41 compounds were isolated, accounting for 92.08% of the essential oil, with more than 90.00% being volatile terpenes. The main components of yarrow essential oil were borneol (16.79%), flanderin (15.92%), cineole (14.32%), camphor (9.77%), and alpha-pinene (3.44%). In general, growth-promoting bacteria and salicylic acid application constitute an advantageous management practice for the commercial production of Achillea millefolium, increasing the nutraceutical and medicinal values of this species.

Impact of planting density and shoot thinning on alstroemeria flowering, soil attributes and cost economics

A field experiment was conducted to assess the impact of various planting densities and levels of shoot thinning on cut flower yield, quality, soil chemical properties and cost economics in the commercially cultivated alstroemeria cultivar 'Capri'. The experiment involved three planting densities (4, 6 and 8 plants/m2) along with three shoot thinning levels (10 %, 20 % and 30 %). It was observed that higher planting density (4 plants/m2) promoted the length of cut stem, early bud formation, and flowering, optimal quality parameters, including maximum stem thickness, cut stem weight, floret quantity/stem, floret size, number of flowering stems/plant (yield) and vase life. Exclusive use of higher vegetative mass removal (30 % shoot thinning) was found to improve quality parameters such as the length of cut stem, number of flowering stems, stem thickness, weight of cut stem, floret quantity/stem, floret size, vase life, and early flowering. Soil samples were collected from each treatment and the consequent lab analysis revealed that the lower planting density and shoot thinning level resulted in maximum soil organic carbon, nitrogen, phosphorous and potassium content. In conclusion, planting density of 4 plants/m2 and 30 % shoot thinning emerged as the optimal combination for enhancing quantitative parameters in commercial alstroemeria cultivation. The study underscores the importance of strategic planting practices and vegetative mass management for maximizing yield and quality in alstroemeria production, along with ensuring higher economic returns.

Promoting flower yields, photosynthetic pigments and some secondary metabolite in Marguerite daisy (Chrysanthemum frutescens L.) cut flower under the smart farming system by pinching technique

Promoting flower yields, photosynthetic pigments and some secondary metabolite in Marguerite daisy (<i>Chrysanthemum frutescens</i> L.) cut flower under the smart farming system by pinching technique

Influence of Different Organic Manures and Inorganic Fertilizers on Growth Attributes and Flower Yield of Marigold (Tagetes erecta L.) under Foot Hills of Himalaya

Influence of Different Organic Manures and Inorganic Fertilizers on Growth Attributes and Flower Yield of Marigold (Tagetes erecta L.) under Foot Hills of Himalaya

Jeevamrit: A Sustainable Alternative to Chemical Fertilizers for Marigold (Tagetes erecta cv. Siracole) Cultivation under Mid-Hills of Himachal Pradesh

Using desi-cow waste products like Jeevamrit under natural farming is widespread among farmers for improving soil biology and productivity. Jeevamrit enhances soil chemical and microbiological properties without needing a large quantity of farmyard manure (FYM) as a sustainable farming practice with a reduced carbon footprint. Despite its traditional use, Jeevamrit faces criticism due to a lack of scientific evidence. This study investigated the comparative effect of Jeevamrit and chemical fertilizers on the growth and yield of marigold cv. Siracole. The experiment employed a randomized block design (RBD) with three replications. The mother block of marigolds was raised for both the summer and winter seasons. From this mother block, three harvesting flushes were taken and propagated from cuttings. The rooted cuttings were planted at monthly intervals and evaluated for flowering parameters and compared to those treated with RDF (30:20:20 N, P, and K g/m2). Soil supplied with Jeevamrit showed enhanced bacteria (26.33%), fungi (18.92%), and actinomycetes (31.21%) populations compared to the recommended dose of fertilizers (RDF) (i.e., N–P–K @ 30:20:20 g m−2). Jeevamrit-treated plants have a more marketable flower yield per square meter (3.98%) and a longer shelf life (9.93%) compared to RDF. The study concludes that Jeevamrit @ 2 liters m−2 is a sustainable and effective alternative to traditional fertilizers for enhancing marigold production in the mid-hills of Himachal Pradesh, where natural farming is already accepted.

Exploring Chemical and Cultural Weed Management for Industrial Hemp Production in Georgia, USA

Industrial hemp (Cannabis sativa) production is complex, with strict regulatory constraints and challenges associated with a lack of labeled pesticides due to its status as a novel crop in the US. Four experiments were conducted in 2020 and 2021 to establish herbicide tolerances for hemp production in the coastal plain of Georgia, USA. Objectives included evaluating hemp response to pretransplant or posttransplant herbicides, determining if planting method influenced herbicide injury from residual preplant applied herbicides, and understanding how plastic mulch may influence hemp flower yields. When applied one day prior to transplanting, maximum hemp crop visual injury was less than 12% compared to the untreated control, with acetochlor, flumioxazin, fomesafen, pendimethalin, and norflurazon while dithiopyr, halosulfuron, isoxaben, and isoxaflutole resulted in greater than 50% injury. Posttransplant applications of S-metolachlor, acetochlor, pendimethalin, and clethodim resulted in less than 15% injury while halosulfuron, metribuzin, trifloxysulfuron, imazethapyr, and prometryn applications resulted in greater than 50% injury to plants. Preplant and posttransplant applied herbicides were found to have little effect on total tetrahydrocannabinol (THC), cannabidiol (CBD), or total cannabinoids in the dry flower after harvest. In a separate experiment, injury from halosulfuron and metribuzin was 52% to 56% less when planted with a mechanical transplanter as compared to the practice of using a transplant wheel to depress a hole in the soil followed by hand transplanting. In the final experiment, hemp dry flower yield in a non-plastic mulched (bareground) system was similar to that in a plastic mulched system. However, early season plant above-ground biomass was less in the plastic mulched system, which may have been due to elevated soil temperatures inhibiting early season growth.

Effect of Liquid Organic Inputs on Growth, Flowering and Yield of Chrysanthemum (Chrysanthemum morifolium Ramat.) and Soil Properties

This experiment was carried out to investigate the Effect of Liquid Organic Inputs on Growth, Flowering and Yield of Chrysanthemum (Chrysanthemum morifolium Ramat.) and Soil Properties. The experiment was carried out during 2022-23 and laid out in a Randomized Block Design (RBD) with fourteen treatments including different combinations of concentrations, methods, and intervals of application of Jeevamrut and Panchagavya and control (only recommended dose of FYM 15 t/ha). Among the treatments, maximum growth and vegetative attributes viz., plant height at 60, 75, 90, 105 and 120 days after transplanting (29.47 cm, 42.33 cm, 50.83 cm, 54.80 cm and 56.53 cm, respectively), number of branches at full bloom stage (8.27) and average plant spread (27.22 cm) was recorded with 500 l/ha Jeevamrut drenching and 8 % Panchagavya foliar application alternatively at fifteen days interval. Earliness in flowering attributes viz., first bud initiation (63.20 days), first flower opening (84.53 days) and full blooming (99.13 days) were observed in the same treatment. Alternate application of 500 l/ha Jeevamrut as soil drenching and 8% Panchagavya as foliar application at 15 days interval also resulted in a number of flowers per plant (35.52), flower yield per plant (141.39 g), flower diameter (6.32 cm) and weight of individual flower (4.11 g). While, treatment consisting of only 500 l/ha Jeevamrut soil drenching at fifteen days interval resulted in maximum available nitrogen (196.52 kg/ha) and viable bacterial count (94.78 × 105 cfu/g of soil) in the soil.

Evaluation of the Potential of PGPR on the Improvement of Flower Yield and Quality Under the Action of Photovoltaic Grow Lamp

However, there is controversy about the role and impact of PV growth on PGPR (Plant Growth-Promoting Rhizobacteria) in soil, so this paper uses regression analysis to study the effect of PV grow lights on PGPR and the improvement of flower yield and quality. The results showed that the PV grow lamp could simulate sunlight and stably output 455nm of light, which could improve the yield of flowers T1 (7.53%), quality T2 (15.40%) and potential T3 (30.28%), and the leaf length, plant height, plant protein and chlorophyll content were higher than those of normal growing plants. Therefore, solar photovoltaic grow lights can realize the conversion of sunlight, and expand the application range of photovoltaic power generation by converting them into analog wave frequencies through photovoltaic technology.

Unveiling the mucilage complexity in a multispecies exploration of the genus Alcea from Iran

Eight field-grown Alcea species (A. koelzii, A. kurdica, A. lavateriflora, A. rechingeri, A. remotiflora, A. rufescenc, A. schiraziana and A. tehranica) were analyzed for their mucilage content to identify the species with the highest yield. The mucilage was extracted with boiling water, precipitated by methanol, and subjected to acid hydrolysis by trifluoroacetic acid. Although mucilage content varied across Alcea species, root yields generally exceeded flower yields, with A. rechingeri roots reaching up to 26.43 %. HPLC analysis showed glucose as the dominant monosaccharide in root mucilage across all species. Rhamnose and fructose content, however, exhibited variations among the species. Field emission scanning electron microscopy micrographs showed layered or fibrous structures, while Fourier Transform Infrared Spectroscopy analysis confirmed a polysaccharide-based composition for flower and root mucilage. Energy dispersive X-ray analysis detected calcium, phosphorus, and magnesium, with higher concentrations in flower mucilage. X-Ray diffraction analysis confirmed the presence of both amorphous and semi-crystalline regions within the mucilage samples, with crystalline phases identified as calcium oxalate hydrate, alpha-cyclodextrin, and glutamic acid. In conclusion, A. koelzii flowers and A. rechingeri roots yielded the highest mucilage content, suggesting Alcea as a promising source of polysaccharides with potential applications in the pharmaceutical and food industries.

Comparative study on agronomic and physiological performance of gerbera (Gerbera jamesonii) under drip and aggregate wick systems

Aggregate wick system (AWS) or capillary action technique is a kind of sub-surface irrigation system gaining popularity owing to its profound advantages of improved water and nutrient use efficiency resulting in superior plant growth and development. However, its effect on growth and physiology of gerbera crop has not been studied yet. Therefore, an experiment was conducted during 2021–23 at ICAR-Indian Institute of Horticultural Research, Bengaluru, Karnataka to assess the effect of aggregate wick system on growth, flowering, vase life, yield and physiological aspects of gerbera var. Arka Nesara as compared to the conventional drip systems. It was apparent from the results that higher overall factor productivity in terms of number of leaves/plant (12.92), earlier first flower harvest (149.80 days) and copious flower production (38.58/plant/year) with enhanced chlorophyll content and optimal starch content were observed with AWS on the soil bed. However, AWS with pots on the ground resulted in extended vase life (9.20 days) with enhanced leaf area (115.31 cm2), chlorophyll-b, reducing sugars and decreased total and non-reducing sugars in leaves. Therefore, it can be concluded that the improved flower yield and vase life of gerbera in aggregate wick systems might be attributed to the greater chlorophyll production and reducing sugars in the leaves, respectively.

Termite mound soil based potting media: a better approach towards sustainable agriculture.

Termite mound soils are known to possess unique physico-chemical and biochemical properties, making them highly fertile. Considering their rich nutrient content, the objective of the current experiment is to assess the physico-chemical properties and enzyme activities of termite mound based potting media and evaluate theirperformance for further exploration in floriculture. Potting media consisting of termite mound soil (TS) of a subterranean termite, Odontotermes obesus were prepared in 7 different combinations with garden soil (GS), sand (S) and farmyard manure (FYM) and a control (without termite mound soil), i.e., T1 (TS, GS, S, FYM (v:v:v:v /1:2:1:1)), T2 (TS, GS, S, FYM (v:v:v:v / 2:1:1:1)), T3 (TS, S, FYM (v:v:v / 2:1:1)), T4 (TS, GS, FYM (v:v:v / 2:1:1)), T5 (TS, GS, S (v:v:v / 2:1:1)), T6 (TS, S, FYM (v:v:v / 3:1:1)), T7 (TS, S, FYM (v:v:v / 1:1:2)) and control (GS, S, FYM (v:v:v / 2:1:1)). The samples were then analysed in laboratory. Experimental analysis on physico-chemical and biological parameters revealed superiority of T7 (TS, S, FYM (v:v:v / 1:1:2)) in terms of pH (7.15), organic carbon (2.13%), available nitrogen (526.02 kg ha-1), available phosphorus (56.60 kg ha-1), available potassium (708.19 kg ha-1), dehydrogenase activity (18.21 μg TTF g-1 soil day-1), Phosphomonoesterase (PME) activity (46.68 54 μg p-nitrophenol/gsoil/h) and urease activity (3.39 μg NH4-N g-1 soil h-1). Whereas T4 (TS, GS, FYM (v:v:v /2:1:1)) registered superiority in terms of PME activity (50.54 μg p-nitrophenol/gsoil/h), Fluorescein diacetate (FDA) activity (11.01 μgfluorescein/gsoil/h) and Soil Microbial Biomass Carbon (SMBC) (262.25 μg/g). Subsequent to the laboratory analysis, two best potting mixtures (T7 & T4) were selected and their performance was assessed by growing a test crop, Tagetes erecta cv. Inca Orange. Considering the growth parameters, the potting media: T7 was found to be significantly superior in terms of plant spread (39.64 cm), leaf area index (4.07), fresh weight (37.72 g), yield (317.81 g/plant), and diameter (9.38 cm) of flower over T4 & control. The Benefit:Cost (B:C) ratio meaning the ratio of net returns to total cost of cultivation was determined. The B:C ratio of raising marigold flower as potted plant in T7 was 1.10 whereas the B:C ratio of the potting mixture of T7 was 2.52. This shows that T7 potting media is also economically viable choice for commercial purposes.