Yeast Cell Surface Display System Research Articles

Single chain antibody fragment display systems: a review

Single chain antibody fragment (scFv) is a small molecule composed of a variable region of heavy chain (VH) and a variable region of light chain (VL) of an antibody, and these two chains are connected by a flexible short peptide. scFv is the smallest functional fragment with complete antigen-binding activity, which contains both the antibody-recognizing site and the antigen-binding site. Compared with other antibodies, scFv has the advantages of small molecular weight, strong penetration, low immunogenicity, and easy expression. Currently, the most commonly used display systems for scFv mainly include the phage display system, ribosome display system, mRNA display system, yeast cell surface display system and mammalian cell display system. In recent years, with the development of scFv in the field of medicine, biology, and food safety, they have also attracted much attention in the sectors of biosynthesis and applied research. This review summarizes the advances of scFv display systems in recent years in order to facilitate scFv screening and application.

Characterization of Trichoderma reesei endoglucanase displayed on the Saccharomyces cerevisiae cell surface and its effect on wine flavor in combination with β-glucosidase

This study aimed to achieve the immobilization of endoglucanase (EGII) from the cellulase family on the cell surface of Saccharomyces cerevisiae, and to evaluate the effect of its co-immobilized β-glucosidase (BGL) on volatiles in wine. Trichoderma reesei EGII (encoded by the EGL2 gene) displayed on S. cerevisiae cell surface was obtained by constructing the gene cassettes containing the GPD promoter and glycosylphosphatidylinositol (GPI) anchoring region (SED1). Our results suggested that EGII activity was further enhanced by transcriptional fusion partner (TFP) and host diploid optimization. Diploid-positive transformants displaying BGL and EGII were inoculated at different ratios into synthetic medium MS300 with grape skins to simulate wine maceration fermentation. The effects of the native signal peptide of EGL2 gene and the 24 TFP factors of S. cerevisiae on the EGII enzymatic activity were compared, and the screened EGII under 6-α TFP factor has the highest enzyme activity. Besides, the mixed fermentation of surface-display EGII and BGL significantly increased the content of compounds such as isoamyl alcohol, phenylethyl alcohol, medium-chain fatty acids, acetate and ethyl esters. Therefore, the yeast cell surface display system created a whole-cell biocatalyst and provided insight into the enological practice on the enrichment of typical flavor compounds in wine.

Cell-surface engineering of yeasts for whole-cell biocatalysts.

Due to the unique advantages comparing with traditional free enzymes and chemical catalysis, whole-cell biocatalysts have been widely used to catalyze reactions effectively, simply and environment friendly. Cell-surface display technology provides a novel and effective approach for improved whole-cell biocatalysts expressing heterologous enzymes on the cell surface. They can overcome the substrate transport limitation of the intracellular expression and provide the enzymes with enhanced properties. Among all the host surface-displaying microorganisms, yeast is ideally suitable for constructing whole cell-surface-displaying biocatalyst, because of the large cell size, the generally regarded as safe (GRAS) status, and the perfect post-translational processing of secreted proteins. Yeast cell-surface display system has been a promising and powerful method for development of novel and improved engineered biocatalysts. In this review, the characterization and principles of yeast cell-surface display and the applications of yeast cell-surface display in engineered whole-cell biocatalysts as well as the improvement of the enzyme efficiency are summarized and discussed.

An overview of yeast cell wall proteins and their contribution in yeast display system

Yeast surface display has become an increasingly popular tool for protein engineering and library screening applications. Although, recent advances have greatly expanded the capability of yeast surface display, the protein display system is still far away from industrial application. One of the major components of a stable, efficient and successful yeast surface display system is cell wall anchor protein with which our desired foreign protein will be attached. We studied 80 different yeast cell wall anchored proteins originated mostly from Saccharomyces cerevisiae and Candida albicans. We studied in details all the cell wall proteins in order to find out suitable cell wall proteins to recommend for the researchers to use in the construction of yeast display system. We considered selective physical properties of different yeast cell wall proteins that are crucial for selecting best suited cell surface anchor proteins which are molecular weight, binding domain of anchor protein, length of amino acid and fusion site. Finally, our studies showed that Ccw11, Ccw12. Cwp1, Cwp2, Dan1, Gas1, Gas5, Exg1, Ycr89, Ecm33, Pga4, Sap9, Sap10, Pst1, Pir1, Pir2, Pir3, Pir4, Cis1, Scw4, Scw6, Bgl2, Uth1, Scw1 are the promising and suitable cell wall anchor proteins could be used in construction of yeast cell surface display system. Additionally, this review presents detailed information about all the cell wall proteins in a single work. The future researchers in this field will be able to construct more efficient yeast display system for recombinant protein production at industrial scale using the knowledge presented in this work.
 Asian J. Med. Biol. Res. June 2019, 5(4): 246-257

Novel strategy for anchorage position control of GPI-attached proteins in the yeast cell wall using different GPI-anchoring domains

The yeast cell surface provides space to display functional proteins. Heterologous proteins can be covalently anchored to the yeast cell wall by fusing them with the anchoring domain of glycosylphosphatidylinositol (GPI)-anchored cell wall proteins (GPI-CWPs). In the yeast cell-surface display system, the anchorage position of the target protein in the cell wall is an important factor that maximizes the capabilities of engineered yeast cells because the yeast cell wall consists of a 100- to 200-nm-thick microfibrillar array of glucan chains. However, knowledge is limited regarding the anchorage position of GPI-attached proteins in the yeast cell wall. Here, we report a comparative study on the effect of GPI-anchoring domain–heterologous protein fusions on yeast cell wall localization. GPI-anchoring domains derived from well-characterized GPI-CWPs, namely Sed1p and Sag1p, were used for the cell-surface display of heterologous proteins in the yeast Saccharomyces cerevisiae. Immunoelectron-microscopic analysis of enhanced green fluorescent protein (eGFP)-displaying cells revealed that the anchorage position of the GPI-attached protein in the cell wall could be controlled by changing the fused anchoring domain. eGFP fused with the Sed1-anchoring domain predominantly localized to the external surface of the cell wall, whereas the anchorage position of eGFP fused with the Sag1-anchoring domain was mainly inside the cell wall. We also demonstrate the application of the anchorage position control technique to improve the cellulolytic ability of cellulase-displaying yeast. The ethanol titer during the simultaneous saccharification and fermentation of hydrothermally-processed rice straw was improved by 30% after repositioning the exo- and endo-cellulases using Sed1- and Sag1-anchor domains. This novel anchorage position control strategy will enable the efficient utilization of the cell wall space in various fields of yeast cell-surface display technology.

Engineered yeast whole-cell biocatalyst for direct degradation of alginate from macroalgae and production of non-commercialized useful monosaccharide from alginate.

Alginate is a major component of brown macroalgae. In macroalgae, an endolytic alginate lyase first degrades alginate into oligosaccharides. These oligosaccharides are further broken down into monosaccharides by an exolytic alginate lyase. In this study, genes encoding various alginate lyases derived from alginate-assimilating marine bacterium Saccharophagus degradans were isolated, and their enzymes were displayed using the yeast cell surface display system. Alg7A-, Alg7D-, and Alg18J-displaying yeasts showed endolytic alginate lyase activity. On the other hand, Alg7K-displaying yeast showed exolytic alginate lyase activity. Alg7A, Alg7D, Alg7K, and Alg18J, when displayed on yeast cell surface, demonstrated both polyguluronate lyase and polymannuronate lyase activities. Additionally, polyguluronic acid could be much easily degraded by Alg7A, Alg7K, and Alg7D than polymannuronic acid. In contrast, polymannuronic acid could be much easily degraded by Alg18J than polyguluronic acid. We further constructed yeasts co-displaying endolytic and exolytic alginate lyases. Degradation efficiency by the co-displaying yeasts were significantly higher than single alginate lyase-displaying yeasts. Alg7A/Alg7K co-displaying yeast had maximum alginate degrading activity, with production of 1.98 g/L of reducing sugars in a 60-min reaction. This system developed, along with our findings, will contribute to the efficient utilization and production of useful and non-commercialized monosaccharides from alginate by Saccharomyces cerevisiae.

Display of Clostridium cellulovorans xylose isomerase on the cell surface of Saccharomyces cerevisiae and its direct application to xylose fermentation

Xylose isomerase (XI) is a key enzyme in the conversion of D-xylose, which is a major component of lignocellulosic biomass, to D-xylulose. Genomic analysis of the bacterium Clostridium cellulovorans revealed the presence of XI-related genes. In this study, XI derived from C. cellulovorans was produced and displayed using the yeast cell-surface display system, and the xylose assimilation and fermentation properties of this XI-displaying yeast were examined. XI-displaying yeast grew well in medium containing xylose as the sole carbon source and directly produced ethanol from xylose under anaerobic conditions.

High-throughput screening of improved protease inhibitors using a yeast cell surface display system and a yeast cell chip

Protease-targeted inhibitors have been promising pharmaceuticals. Here, we combined a yeast cell surface display system with a yeast cell chip for the high-throughput screening of protease inhibitors, and succeeded in improving the activity of a protease inhibitor.

Displaying non-natural, functional molecules on yeast surfaces via biotin–streptavidin interaction

Here we expand the yeast cell surface display system to display non-natural, functional molecules. The short biotin acceptor peptide (BAP) sequence of biotin ligase from E. coli (BirA) was genetically introduced to the N-terminus of the anchor protein, Flo428. Through co-expression of BAP-fused Flo428 with BirA, biotinylated BAP could be displayed on the yeast cell surface. Subsequent addition of streptavidin–FITC resulted in the display of streptavidin–FITC, and, the display of biotin–FITC was successful using streptavidin as a linker. Our strategy provides a powerful tool for displaying functional molecules on yeast cell surfaces.

Yeast cell surface display system for determination of humoral response to active immunization with a monoclonal antibody against EpCAM

Even though an immunogenic formulation of the murine monoclonal anti-EpCAM (epithelian cell adhesion molecule) antibody Mab 17-1A, has been shown to evoke a strong humoral immune response in both, monkey studies and early clinical trials, conventional anti-EpCAM ELISA could not identify anti-EpCAM immune response in relation to treatment with Mab17-1A. In contrast, usage of cellulose membranes prepared by SPOT technology presenting overlapping EpCAM peptides allowed the unequivocal determination of EpCAM related antibodies present in monkeys sera after immunization with IGN101. Based on such contradictory results, it was of high interest to compare obtained data to a different method for better assessment of their possible interpretation. Therefore, in the present studies, some EpCAM peptides, determined as reactive by binding of IgG isolated from sera of treated monkeys on membranes prepared by SPOT technology, were represented on yeast surface using the pYD1 yeast display vector system. Binding of biotinylated IgG from sera was detected with streptavidin–FITC and quantity of binding was determined by FACS measurement. Though using this completely different method, experiments with pre-immune and immune sera of four monkeys exemplarily are comparable to the results obtained by analysis with synthetic peptide arrays.

High-efficiency recovery of target cells using improved yeast display system for detection of protein–protein interactions

We constructed a high-throughput screening (HTS) system for target cells based on the detection of protein-protein interactions by flow cytometric sorting due to the improvement in the yeast cell surface display system. Interaction model proteins, which are the ZZ domain derived from Staphylococcus aureus and the Fc part of human immunoglobulin G (IgG), were displayed on the yeast cell surface. We achieved a rapid and enhanced expression of these proteins as a result of adopting an appropriate yeast strain and a suitable promoter. The displayed ZZ domain had an ability to bind to rabbit IgG and the displayed Fc part to protein A. These were confirmed by flow cytometry and fluorescence microscopy. Furthermore, the cells displaying the ZZ domain or Fc part were isolated from the model libraries constructed by mixing the control yeast cells with the target yeast cells. The ratio of the target cells was increased from 0.0001% to more than 70% by two cycles of cell sorting. These results indicate that we can achieve a rapid and highly efficient isolation method for the target cells with FACSCalibur and that this method will further extend the application of flow cytometric sorting to library selections.

Development of Novel Yeast Cell Surface Display System for Homo-oligomeric Protein by Coexpression of Native and Anchored Subunits

Streptavidin derived from Streptomyces avidinii was displayed on the cell surface of the yeast Saccharomyces cerevisiae by cell-surface engineering using two types of plasmid for the expression of a native subunit and an anchored subunit fused with the C-terminus of 318 amino acids of Flo1p containing a glycosylphosphatidylinositol anchor attachment signal. The displayed streptavidin had the binding ability for biotinylated compounds. This was confirmed by fluorescence microscopy after the adsorption of yeast cells displaying streptavidin and biotinylated fluorescein isothiocyanate. On the other hand, streptavidin produced by cells harboring only the plasmid for the expression of the anchored subunit showed a very low binding activity for biotinylated compounds. Cells displaying streptavidin may constitute novel whole-cell affinity adsorbents widely used for immunoassay and biosensing. This coexpression method will ensure that proteins, such as homo- and hetero-oligomeric proteins, are displayed on the cell surface in an active form.

Affinity selection of target cells from cell surface displayed libraries: a novel procedure using thermo-responsive magnetic nanoparticles.

Biotinylated thermo-responsive magnetic nanoparticles for use in affinity selection from yeast cell surface display libraries were prepared by coating magnetite nanoparticles with a thermo-responsive polymer consisting of N-isopropyl acrylamide and a biotin derivative. These particles showed a reversible transition between flocculation and dispersion at around the lower critical solution temperature of 30 degrees C, above which the flocculated particles--which absorbed a large amount of avidin due to their large surface area--were quickly separable by magnet. The model library was constructed by mixing control yeast cells with target yeast cells co-displaying IgG binding protein (ZZ) and enhanced green fluorescence protein. Biotinylated IgG and avidin were subsequently added to the model library, and target cells were efficiently enriched with the biotinylated magnetic nanoparticles by avidin-biotin sandwich and ZZ-IgG interaction. The few target cells (0.001%) in the model library were enriched by up to 100% in only 5 days by an affinity selection procedure repeated four times. This novel method based on magnetic nanoparticles and a yeast cell surface display system could fulfill a wide range of applications in the analysis of protein-protein interactions and rapid isolation of novel biomolecules.