X-ray Photoelectron Spectroscopy Analysis Research Articles

Electronic effect in bromide-modified noble metal catalysts promotes highly stable and selective hydrogenation

Halides with strong affiliation to metals are traditionally viewed as positions in heterogeneous catalysis. This study introduces a method to enhance the selective hydrogenation performance of noble metal nanoparticle catalysts (Pd, Pt, and Rh hosted on N-doped carbon, SiO2, and Al2O3) by gas-phase bromination with 1-bromooctane. Brominated Pd catalysts, particularly those supported on N-doped carbon, show significant improvements in total butene selectivity and stability in butadiene hydrogenation reactions, displaying >97.5 % selectivity to total butenes at complete conversion with 50 h stable performance even at excessive H2 (H2:butadiene = 50) and a high temperature of 473 K. Comprehensive characterizations coupled with density functional theory calculations reveal that bromide species enhance selective hydrogenation by preferentially adsorbing at stepped Pd sites, altering reaction kinetics and preventing over-hydrogenation. Bromination influences reactant and intermediate adsorption, leading to increased competitive adsorption compared to pristine catalysts. Chemisorption studies on butadiene and 1-butene support altered kinetic behaviors post-bromination. X-ray photoelectron spectroscopy analysis demonstrate an increase in surface Pdδ+ species, owing to the electron-pulling character of nearby adsorbed bromide. In situ diffuse reflection infrared Fourier transform spectroscopy with CO probe molecules confirms Br species adsorption at unsaturated Pd sites. Overall, the study provides an effective approach to tuning the electronic properties of metal catalysts and highlights the positive impact of bromination on improving the hydrogenation performance.

Selective extraction of lead from chelator-rich effluents using a biomass-based sorbent

The efficient removal of lead (Pb) from waste streams containing chelators presents a significant challenge due to the high stability and mobility of Pb-chelator complexes. This study investigates a novel approach utilizing a biomass-based sorbent, proline-incorporated dithiocarbamate-modified cellulose with epoxy-cross-linkage (DMC-Pro-Epo6), to extract Pb from effluents with excess chelators. DMC-Pro-Epo6 exhibited exceptional Pb(II) sorption performance under controlled and various chelator-rich conditions. The sorbent maintained high sorption efficiency even with 100-fold excess chelator concentration and competing metal ions. DMC-Pro-Epo6 also outperformed commercially-available ion-selective sorbents in terms of separation efficiency. The sorption kinetics followed a pseudo-second order model, demonstrating rapid sorption with equilibrium reached within 20 min. The maximum sorption capacities of DMC-Pro-Epo6 obtained from the Langmuir isotherm model were 1267 and 659 µmol g−1 in Pb(II)-containing aqueous solution and Pb(II)-containing EDTA solution, respectively. X-ray photoelectron and absorption spectroscopy analyses, along with sorption parameters, confirmed a chemisorption mechanism for Pb(II) sorption onto DMC-Pro-Epo6. Validation of the protocol using real waste samples with complex chelator and base metal ion matrices resulted in a quantitative and selective extraction of 92 to 99 % of Pb(II). This success suggests the potential for scaling up the developed process. Compared to conventional treatment methods, the proposed technique offers a more efficient and streamlined process for separating metal ions and chelators from effluents.

Production and characterization of Zn- and Cu-doped Y2O3-Al2O3-SiO2 (YAS) glass microspheres.

Y2O3-Al2O3-SiO2 (YAS) glass microspheres are currently used in radioembolization treatment. However, abscess formation can occur following this treatment. This study aims to endow YAS glass microspheres with antibacterial properties to address the abscesses forming in patients after radioembolization treatment. In this study, undoped YAS glass microspheres and those doped with antibacterial agents zinc (Zn) and/or copper (Cu) were successfully fabricated using a sol-gel derived method. After heat treatment, the microspheres exhibited an amorphous structure. Additionally, the incorporation of Zn and/or Cu dopants did not alter the patterns observed in the X-ray diffraction analysis. Fourier transform infrared spectroscopy analysis detected Si-O-Si, Al-O-Al, and Y-O band vibrations within the structure. The presence of Zn and Cu dopants was confirmed through X-ray photoelectron spectroscopy analysis. Scanning electron microscopy revealed that all samples possessed a regular microsphere morphology, with average particle sizes ranging from 6 to 50 μm. These average particle sizes were further confirmed using a mastersizer. The antibacterial agent-doped YAS glass microspheres show promise in combating infections that occur following radioembolization treatment.

Ultra-High Adsorption Capacity of Calcium-Iron Layered Double Hydroxides for HEDP Removal through Phase Transition Processes.

Antiscalant disposal in reverse osmosis concentrate (ROC) treatment is a significant obstacle in desalination. This study investigated the adsorption performance of LDHs for removing 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP). CaFe-LDH presented a specific adsorption behavior and ultrahigh adsorption capacity for HEDP, with a maximum adsorption capacity of 335.7 mg P/g (1116.5 mg HEDP/g) at pH 7.0. X-ray diffraction (XRD) demonstrated that HEDP adsorption induced a structural transformation of CaFe-LDH from a layered configuration to a highly ordered structure, leading to a noticeable phase transition. Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and Raman spectroscopy further confirmed that two distinct binding modes of HEDP, relating to chelation with Ca2+ and adsorption on Fe3+ simultaneously, are connected by phosphonic acid groups (-C-PO(OH)2), forming the CaFe-HEDP complex. X-ray fluorescence (XRF) and X-ray photoelectron spectroscopy (XPS) analyses revealed that the CaFe-HEDP ternary complex exhibits a highly ordered arrangement in an oxygen-bridged framework. The construction of an oxygen-coordinated framework contributes to the incorporation of more HEDP into CaFe-LDH, leading to a well-aligned lattice in the new phase. These findings provide valuable insights into developing novel LDH-based adsorbents for removing phosphorus-containing antiscalants, establishing a sustainable approach to ROC management, and potential environmental risk reduction.

Characterization and Antibacterial Activity of Silver Nanoparticles Synthesized from Oxya chinensis sinuosa (Grasshopper) Extract.

In this study, silver nanoparticles (AgNPs) were synthesized using a green method from an extract of the edible insect Oxya chinensis sinuosa (O_extract). The formation of AgNPs (O_AgNPs) was confirmed via UV-vis spectroscopy, and their stability was assessed using Turbiscan analysis. The size and morphology of the synthesized particles were characterized using transmission electron microscopy and field-emission scanning electron microscopy. Dynamic light scattering and zeta potential analyses further confirmed the size distribution and dispersion stability of the particles. The average particle size was 111.8 ± 1.5 nm, indicating relatively high stability. The synthesized O_AgNPs were further characterized using X-ray photoelectron spectroscopy (XPS), high-resolution X-ray diffraction (HR-XRD), and Fourier transform infrared (FTIR) spectroscopy. XPS analysis confirmed the chemical composition of the O_AgNP surface, whereas HR-XRD confirmed its crystallinity. FTIR analysis suggested that the O_extract plays a crucial role in the synthesis process. The antibacterial activity of the O_AgNPs was demonstrated using a disk diffusion assay, which revealed effective activity against common foodborne pathogens, including Salmonella Typhimurium, Escherichia coli, Staphylococcus aureus, and Bacillus cereus. O_AgNPs exhibited clear antibacterial activity, with inhibition zones of 15.08 ± 0.45 mm for S. Typhimurium, 15.03 ± 0.15 mm for E. coli, 15.24 ± 0.66 mm for S. aureus, and 13.30 ± 0.16 mm for B. cereus. These findings suggest that the O_AgNPs synthesized from the O_extract have potential for use as antibacterial agents against foodborne bacteria.

Two step synthesis of g-C3N4@GO composites with enhanced photoluminescence response

Tuning the optical properties of graphene oxide (GO) by making composites with 2D materials has attracted considerable interest for various applications. Here, the g-C3N4@GO composite is synthesised by a two-step modified Hummer’s method with 3 wt% and 7 wt% g-C3N4. Structural and chemical properties of GO and with g-C3N4 are investigated by x-ray diffraction (XRD) and x-ray photoelectron spectroscopy (XPS), respectively, while scanning electron microscopy reveals a flake-like structure in g-C3N4@GO composites. Raman analysis gives an increase in ID/IG ratio from 3.1 to 3.2 due to the formation of defects for 3 wt% g-C3N4 but reduced to 2.9 with 7 wt% g-C3N4. Optical bandgap of GO (∼3.35 eV) is reduced to ∼3.30 eV (3 wt% g-C3N4) and ∼3.25 eV (7 wt% g-C3N4) with respective defect edges at ∼2.53 eV, 2.52 eV and 2.50 eV, in good agreement with the photoluminescence (PL) results. The appearance of a broad XRD peak at ∼23.2° signifies the formation of rGO by reducing GO with g-C3N4, where the existence of HO–C=O in XPS analysis reveals the formation of defects. This is found to be associated with a chemical reaction at the g-C3N4/GO interfaces and thus makes this system promising with increased PL intensity.

Oxidation anisotropy of 4H-SiC wafers during chemical-mechanical polishing

4H silicon carbide (4H-SiC) wafers are widely used in high-power, high-temperature, and high-frequency electronics owing to their excellent physical and electrical properties. In the processing of 4H-SiC wafers, chemical-mechanical polishing (CMP) is commonly employed to realize atomic-scale smoothness, damage-free surface, and global planarization. The CMP process is the synergy of wet oxidation and mechanical grinding, whose efficiency significantly relies on the oxidation process. Therefore, understanding the wet oxidation mechanism of Si face and C face of 4H-SiC wafers is critical to high-efficiency double-side CMP. In this work, the anisotropic CMP performance of Si face and C face of 4H-SiC wafers are investigated. It has been found that the material removal rate of the C face is 2–3 times that of the Si face. The thicknesses of the transient oxide layer on the C face and Si face are 8.71 nm and 3.50 nm, respectively. X-ray photoelectron spectroscopy analysis reveals that the oxygen content on the C face is higher than that on the Si face after wet KMnO4 oxidation. This indicates that the C face of 4H-SiC is easier to oxidize, which results in more oxides that that on the Si face of 4H-SiC. Our work shows that accelerating the oxidation of the Si face of 4H-SiC wafers during the simultaneous double-sided CMP process is crucial for the efficient polishing of 4H-SiC wafers.

Mechanism of Sulfate Radical Formation on Activation of Persulfate Using Doped Metal Oxide and Its Role in Degradation of Tartrazine Dye in an Aqueous Solution.

Degradation of tartrazine dye (TZD) was performed in this study using sulfate radicals (SO4•-) generated from the activated sodium persulfate (SPS) using Fe3O4@PDA nanoparticles (NPs). The NPs were characterized by Fourier transform infrared (FTIR), vibrating sample magnetometer (VSM), X-ray diffraction (XRD), high-resolution scanning electron microscopy (HR-SEM), X-ray photoelectron spectroscopy (XPS), high resolution transmission electron microscopy (HRTEM), and energy-dispersive X-ray spectroscopy (EDX). The average particle size of the NPs was 17.49 nm from XRD analysis. The presence of the C-N group at 1129 cm-1 in FTIR and 2.54% of the nitrogen element identified from the EDX plot was evidence of successful doping of polydopamine (PDA). Superparamagnetic nature with a decrease in the Ms value to 42.015 emu/g after doping was determined. Doping was further confirmed by XPS analysis with binding energies at 399.68 and 400.99 eV. The average particle size from HRTEM analysis was 21.47 nm with a lattice spacing of 0.30 nm. Turnover number (TON) and turnover frequency (TOF) values for Fe3O4@PDA were determined to be 3.72 and 0.0248 min-1 with respect to different systems, respectively. Optimum conditions for the Fe3O4@PDA/SPS system were 50 ppm TZD, 0.9 g/L catalyst, 12 mM SPS, and pH 4 with 94.68% efficiency in 150 min. The inhibition effect of ions in TZD degradation followed the order humic acid <NO3- < Cl- < CO32. The kinetic model fitting the Fe3O4@PDA/SPS system has pseudo-second-order kinetics. Excess formation of SO4•- produced hydroxyl radicals (•OH) that were identified by a scavenging test. Reusability of the NPs was performed for five cycles and showed acceptable degradation performance up to 82.47%. The intermediates identified from gas chromatography-mass spectrometry (GCMS) proved the cleavage of azo and sulfonate groups of TZD with the formation of nontoxic intermediates. Finally, the phytotoxicity assessment was studied using Vigna radiata (Green grams). The % decrease of the root, shoot, and seedling length for the degraded dye solution was negligible. Hence, this study proved that the Fe3O4@PDA/SPS system could effectively degrade TZD with nontoxic intermediate formation.

In Situ Single-phase Formation of LaCl(CN2) Mixed-Anion Compound Via Controlled Pyrolysis of La3+ Modified Melamine Precursor.

Nitride (N3-) or cyanamide (CN22-) based mixed-anion compounds stand as attractive materials due to their unique properties derived from the binary or multiple anions, although their synthesis remains challenging in incorporating the N3- or CN22- anions safely. This work highlights the first demonstration of in situ single phase formation of a LaCl(CN2) mixed-anion compound from a stable single source precursor, melamine modified with LaCl3 preparable under aqueous conditions. The in situ formation of LaCl(CN2) involves the chemical modification of melamine with LaCl3 to form a complex. Upon heating of the precursor under N2 flowing, this complex generates cyanamide species around 400 °C, which react with LaCl3 and nonsublimated melamine to afford a binary LaCl(CN2)/g-C3N4 composite. Further pyrolysis at 800 °C decomposes the g-C3N4 counterpart, resulting in the LaCl(CN2) single-phase formation. The electronic properties of the precursor-derived single phase LaCl(CN2) were studied by the density functional theory calculation and UV-vis spectroscopy combined with X-ray photoelectron spectroscopy analyses and characterized by measuring 4.7, 1.8, and -2.9 eV for the band gap energy, the valence band maximum, and the conduction band minimum relative to Fermi energy, respectively. This study paves the way for exploring various cyanamide-based mixed anion compounds, advancing their potential applications in various fields.

Enhanced electrocatalytic OER activity following electrochemical pre-cathodic treatment of Mn-substituted nickel ferrite

In this study, the electronic engineering of a high-valent active site for enhanced oxygen evolution reaction (OER) was achieved through the electrochemical pre-cathodic treatment method (EPCTM). This method involves applying a cathodic potential to the drop-cast working electrode of Mn-substituted nickel ferrite (Ni1−xMnxFe2O4; where x = 0.0, 0.2, and 0.4) electrocatalysts. X-ray photoelectron spectroscopy analysis revealed an increase in the ratios of Ni3+/Ni2+ and Mn3+/Mn2+ in Ni1−xMnxFe2O4 after EPCTM followed by OER, leading to an enhancement in electrochemical OER current density at 600 mV overpotential by 3.65 times for x = 0.0, 5.56 times for x = 0.20, and 4.72 times for x = 0.40. This enhancement was further supported by a decrease in the slope of the anodic Tafel equation after EPCTM, indicating improved efficiency of the interaction between the working electrode and electrolyte, as a lower Tafel slope suggests better charge exchange at the electrode–electrolyte interface. The positive slope in the Mott–Schottky (MS) plot for all Ni1−xMnxFe2O4 samples confirmed the p-type nature of the electrocatalysts. Additionally, the significant decrease in the slope of the linear portion of the MS plot indicated an increase in carrier concentration after electrochemical pre-cathodic treatment in all Ni1−xMnxFe2O4 samples. This increase in p-type carrier concentration supports the observed increase in the Ni3+/Ni2+ ratio for OER after EPCTM.

Plasmonic ZnO-Au Nanocomposites: A Synergistic Approach to Enhanced Photocatalytic Activity through Nonthermal Plasma-Assisted Synthesis

A novel and efficient method for synthesizing Au-decorated ZnO nanoparticles (NPs) with enhanced photocatalytic activity is presented. The synthesis involves a two-step process: hydrothermal preparation of ZnO NPs followed by nonthermal plasma-assisted deposition of Au nanoparticles on their surface. Comprehensive characterization of the ZnO and ZnO–Au NPs was carried out using X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, and X-ray photoelectron spectroscopy (XPS). Optical properties were evaluated via UV-Vis absorption and fluorescence measurements. The synthesized ZnO NPs displayed a hexagonal wurtzite structure, and the successful deposition of Au NPs was confirmed by TEM and XPS analysis, along with Raman and fluorescence data showing the quenching effect caused by Au. The incorporation of Au nanoparticles led to the appearance of localized surface plasmon resonance (LSPR) at 540 nm, enhancing visible light absorption and improving photocatalytic performance. Notably, the methylene blue (MB) degradation efficiency increased from 78% with pure ZnO NPs to 91.6% with ZnO–Au NPs under UV-Vis irradiation, demonstrating superior photocatalytic activity. This study introduces a simple and scalable method for synthesizing plasmonic ZnO-Au hybrid nanomaterials using plasma technology and highlights the critical role of Au NPs in enhancing photocatalytic performance by reducing electron–hole recombination.

Development of Novel Biocomposites with Antimicrobial-Activity-Based Magnesium-Doped Hydroxyapatite with Amoxicillin.

Background/Objectives: A biocomposite based on magnesium-doped hydroxyapatite and enriched with amoxicillin (MgHApOx) was synthesized using the coprecipitation method and is presented here for the first time. Methods: The stability of MgHAp and MgHApOx suspensions was evaluated by ultrasound measurements. The structure of the synthesized MgHAp and MgHApOx was examined with X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy and X-ray photoelectron spectroscopy (XPS). The crystalline structure was determined by X-ray diffraction. The FTIR data were collected in the range of 4000-400 cm-1. The morphology of the nanoparticles was evaluated by scanning electron microscopy (SEM). Furthermore, the biocompatible properties of MgHAp, MgHApOx and amoxicillin (Ox) suspensions were assessed using human fetal osteoblastic cells (hFOB 1.19 cell line). The antimicrobial properties of the MgHAp, MgHApOx and Ox suspension nanoparticles were assessed using the standard reference microbial strains Staphylococcus aureus ATCC 25923, Escherichia coli ATCC 25922 and Candida albicans ATCC 10231. Results: X-ray studies have shown that the biocomposite retains the characteristics of HAp and amoxicillin. The SEM assessment exhibited that the apatite contains particles at nanometric scale with acicular flakes morphology. The XRD and SEM results exhibited crystalline nanoparticles. The average crystallite size calculated from XRD analysis increased from 15.31 nm for MgHAp to 17.79 nm in the case of the MgHApOx sample. The energy-dispersive X-ray spectroscopy (EDS) and X-ray photoelectron spectroscopy (XPS) analysis highlighted the presence of the constituent elements of MgHAp and amoxicillin. Moreover, XPS confirmed the substitution of Ca2+ ions with Mg2+ and the presence of amoxicillin constituents in the MgHAp lattice. The results of the in vitro antimicrobial assay demonstrated that MgHAp, MgHApOx and Ox suspensions exhibited good antimicrobial activity against the tested microbial strains. The results showed that the antimicrobial activity of the samples was influenced by the presence of the antibiotic and also by the incubation time. Conclusions: The findings from the biological assays indicate that MgHAp and MgHApOx are promising candidates for the development of new biocompatible and antimicrobial agents for biomedical applications.

Enhanced Yield of Methyl Ethyl Ketone through Levulinic Acid Decarboxylation in the AgNO3/K2S2O8 System: Mechanistic Insights and Characterization of Metallic Species.

Methyl ethyl ketone (MEK) is among the most extensively utilized solvents in various industrial applications. In this study, we present a highly efficient synthesis route for MEK via the decarboxylation of biomass-derived levulinic acid, using potassium persulfate (K2S2O8) and silver nitrate (AgNO3) as key reagents. The specific roles of AgNO3 and K2S2O8 were thoroughly investigated. Additional silver species, such as Ag2O and AgO, were also detected during the reaction. X-ray photoelectron spectroscopy (XPS) and X-ray diffraction (XRD) analyses provided evidence of the evolution of solid phases throughout the reaction. Based on these findings, we propose a radical decarboxylation mechanism initiated by the generation of sulfate radicals (SO4•⁻) through the catalytic breakdown of K2S2O8 by AgNO3. This mechanistic understanding, combined with a parametric study, enabled us to achieve an unprecedented level of levulinic acid conversion (97.9%) and MEK yield (86.6%) with this system, surpassing all previously reported results in the literature.

Enhanced activation of peroxymonosulfate by introducing Co/Fe atoms in LaCoO3-biochar derived catalysts for the degradation of sulfamethoxazole

In this study, a novel perovskite-biochar composite, LaCoMO3-C (LaCoM-C, M = Cu, Fe), was designed using a co-precipitation-calcination strategy and employed activation of peroxymonosulfate (PMS) for efficiently degrade sulfamethoxazole (SMX). The degradation results indicated that the LaCoCu-C/PMS system could effectively degrade 95 % of SMX within 7 min with a kinetics rate constant of 0.33 min−1, which was about 2.21, 6.64 and 3.7 times that of LaCoFe-C, LaCoCu and LaCo-C, respectively. The biochar skeleton greatly increased the specific surface area and uniform distribution of surface active sites of the composites, leading to the optimization of its catalytic performance. Density Functional Theory (DFT) calculations demonstrated that the adsorption capacity of the composites with PMS could be improved by introducing Cu/Fe elements into the interfacial structure of the composites, while Co was identified as the dominant active site. Combined with quenching test, electron paramagnetic resonance(EPR) and X-ray photoelectron spectroscopy (XPS) analyses, we demonstrated the generation of reactive oxygen species including 1O2, •OH, SO4•- and O2•-, and revealed that the oxidation process of Cu+/Cu2+ and Co2+/Co3+ on the LaCoCu-C surface contributes to PMS activation. This work constitutes an insightful reference for the development of catalysts based on perovskite B-site for efficient activation of PMS.

XPS Binding Energy Shifts in 2D Ti3C2Tz MXene go largely Beyond Intuitive Explanations: Rationalization from DFT Simulations and Experiments.

MXenes are prototypes of surface tunable 2D materials with vast potential for properties tuning. Accurately characterizing their surface functionalization and its role in electronic structure is crucial, X-ray photoelectron spectroscopy (XPS) being among the go-to methods to do so. Despite extensive use, XPS analysis remains however intricate. Focusing on the benchmark MXene Ti3C2Tz, Density Functional Theory (DFT) calculations of core-level binding energy shifts (BE.s.) are combined with experiments in order to provide a quantitative interpretation of XPS spectra. This approach demonstrates that BE.s. are driven by the complex interplay between chemical, structural, and subtle electronic structure effects preventing analysis from intuitive arguments or comparison with reference materials. In particular, it is shown that O terminations induce the largest BE.s. at Ti 2p levels despite lower electronegativity than F. Additionally, F 1s levels show weak sensitivity to the F local environment, explaining the single contribution in the spectrum, whereas O 1s states are significantly affected by the local surface chemistry. Finally, clear indicators of surface group vacancies are given at Ti 2p and O 1s levels. These results demonstrate the combination of calculations with experiments as a method of the highest value for MXenes XPS spectra analysis, providing guidelines for otherwise complex interpretations.

Stoichiometry modulated tunable optoelectronic properties of Nb-doped WS2 synthesized by chemical vapor deposition method.

Significant progress has been made in the field of two-dimensional WS2, yet the precise control of the doping process to achieve desired properties and the interpretation of complex physical phenomena in these novel materials necessitate thorough research. In this study, Nb-doped WS2 is synthesized using chemical vapor deposition technology, leading to triangular flakes with a side length of 12-20μm. The X-ray photoelectron spectroscopy analysis indicates that the NbW substitution defect functions as an electron acceptor. The interlayer and transverse forces of the Nb-doped WS2 flake approach 1 nN and 150 pN, respectively. As the doping concentration increases, the valence band maximum energy of Nb-doped WS2 ranges from 4.06eV to 4.3eV. Furthermore, the performance of the photodetector is discussed.

Advancement of Electro-Optical Properties through Changes in the Physicochemical Composition of Hybrid Thin Films by Doping Reduced Graphene Oxide into a Sol-Gel Process Solution.

A hybrid thin film was fabricated by doping graphene oxide into a sol-gel solution containing a mixture of zirconium, bismuth, and indium oxide. The thin film was fabricated using a brush coating process. The graphene oxide doping ratios used were 0, 5, and 15 wt%. During the thin film fabrication process, the produced sol-gel solution generates a contractile force due to the shear stress of the brush bristles, resulting in a microgroove structure. This structure was confirmed through scanning electron microscopy analysis, which revealed the clear presence of rGO. Comparing the electrical properties of a zirconium bismuth indium oxide thin film without graphene oxide doping and a thin film doped with 15 wt% graphene oxide, the electro-optical properties were significantly improved with graphene oxide doping. In general, the threshold voltage decreased by approximately 0.42 V. In addition, bandgap measurements confirmed the improved conductivity characteristics with graphene oxide doping. Since this improvement in electro-optical properties is associated with the reduction process due to graphene oxide doping, X-ray photoelectron spectroscopy analysis was performed to assess the intensity change of each element. Based on these observations, hybrid thin films doped with graphene oxide emerge as promising candidates for next generation thin film.

Effect of SiCN thin film interlayer for ZnO-based RRAM.

This study investigates the effect of silicon carbon nitride (SiCN) as an interlayer for ZnO-based resistive random access memory (RRAM). SiCN was deposited using plasma-enhanced chemical vapor deposition (PECVD) with controlled carbon content, achieved by varying the partial pressure of tetramethylsilane (4MS). Our results indicate that increasing the carbon concentration enhances the endurance of RRAM devices but reduces the on/off ratio. Devices with SiCN exhibited lower operating voltages and more uniform resistive switching behavior. Oxygen migration from ZnO to SiCN is examined by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) analyses, promoting the formation of conductive filaments (CFs) and lowering set voltages. Additionally, we examined the impact of top electrode oxidation on RRAM performance. The oxidation of the Ti top electrode was found to reduce endurance and increase low resistive state (LRS) resistance, potentially leading to device failure through the formation of an insulating layer between the electrode and resistive switching material. The oxygen storage capability of SiCN was further confirmed through high-temperature stress tests, demonstrating its potential as an oxygen reservoir. Devices with a 20 nm SiCN interlayer showed significantly improved endurance, with over 500 switching cycles, compared to 62 cycles in those with a 5 nm SiCN layer. However, the thicker SiCN layer resulted in a notably lower on/off ratio due to reduced capacitance. These findings suggest that SiCN interlayers can effectively enhance the performance and endurance of ZnO-based RRAM devices by acting as an oxygen reservoir and mitigating the top electrode oxidation effect.

Surface modification of ilmenite with sodium persulfate and its effect on flotation performance

Ilmenite is a challenging mineral to float, making the improvement of its floatability a prominent research focus. This study proposes a novel surface modification method using sodium persulfate (Na2S2O8) activation in the sodium oleate system for ilmenite. The activation mechanism was investigated using micro-flotation, zeta potential analysis, adsorption measurement, contact angle measurement, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), flotation kinetics calculation, and thermodynamic analysis. Flotation tests demonstrated a significant increase in ilmenite recovery after Na2S2O8 activation under weakly acidic conditions, particularly at pH 4.0, where recovery increased from 12.41 % to 67.24 %. Zeta potential, contact angle, and adsorption tests revealed that Na2S2O8 activation positively shifted the surface potential of ilmenite, enhancing sodium oleate adsorption and increasing hydrophobicity. FT-IR, XPS, and thermodynamic analyses showed that Na2S2O8 facilitated the conversion of Fe2+ to Fe3+ on the ilmenite surface. Additionally, activation with sodium persulfate increased the Fe3+ content on the surface from 20.13 % to 43.50 %, leading to the formation of a more stable ferric iron oleate. AFM scans confirmed that Na2S2O8 activation significantly increased the area and thickness of sodium oleate adsorbed on the ilmenite surface compared to unactivated ilmenite.

The inclusion of clay minerals accelerates biocrust formation and potentially boosts carbon storage capabilities

Biocrusts, prevalent in desert areas, play a pivotal role in mitigating soil degradation, shaping a common natural landscape. However, amidst climate change and human activities, biocrust coverage is encountering the risk of degradation. The restoration of degraded biocrusts and the construction of artificial ones are regarded as promising technologies for combating soil degradation. Although clay minerals are a crucial abiotic factor in biocrust formation and are directly influence their development and succession, they have not gained widespread attention. The aim of this study was to investigate the mechanism of action of clay minerals in biocrusts. Various quantities of sepiolite were amalgamated with cyanobacteria—Microcoleus vaginatus (ratios of 1:0, 1:10, 1:20, 1:50, 1:100; cyanobacteria dry weight to sepiolite weight), to construct artificial biocrusts and observe the formation and development of them. The results showed that the addition of small quantities of sepiolite (ratios of 1:10 and 1:20) not only facilitated the accumulation of cyanobacterial biomass (1.47–1.86 times) and exopolysacchrides (EPS) (1.73–2.58 times) compared to the control (ratio of 1:0), but also notably enhanced the accumulation of total carbon, total organic carbon, and microbial biomass carbon, highlighting its potential in enhancing the carbon sequestration capabilities of biocrusts. Scanning electron microscope (SEM) analysis revealed that sepiolite serves as a “receiver and bridge” within the biocrust structure, enhancing its compactness and stability, thereby fostering the growth of cyanobacteria and facilitating nutrient transport. Further, Fourier Transform Infrared (FTIR) and X-Ray Photoelectron Spectroscopy (XPS) analysis reviewed changes in some functional groups of EPS and sepiolite after mixing, validating that EPS can function as a “binder” to unify particles. Our findings demonstrate that the incorporation of clay minerals can facilitate biocrust formation, presenting a practical and economical approach, and providing a novel perspective for constructing artificial biocrusts and rehabilitating degraded desert soils.