X-ray Absorption Fine Structure Research Articles

Sublimation Transformation Synthesis of Dual-Atom Fe Catalysts for Efficient Oxygen Reduction Reaction.

Dual-atom catalysts (DACs) have garnered significant interest due to their remarkable catalytic reactivity. However, achieving atomically precise control in the fabrication of DACs remains a major challenge. Herein, we developed a straightforward and direct sublimation transformation synthesis strategy for dual-atom Fe catalysts (Fe2/NC) by utilizing in situ generated Fe2Cl6(g) dimers from FeCl3(s). The structure of Fe2/NC was investigated by aberration-corrected transmission electron microscopy and X-ray absorption fine structure (XAFS) spectroscopy. As-obtained Fe2/NC, with a Fe-Fe distance of 0.3 nm inherited from Fe2Cl6, displayed superior oxygen reduction performance with a half-wave potential of 0.90 V (vs. RHE), surpassing commercial Pt/C catalysts, Fe single-atom catalyst (Fe1/NC), and its counterpart with a common and shorter Fe-Fe distance of ~0.25 nm (Fe2/NC-S). Density functional theory (DFT) calculations and microkinetic analysis revealed the extended Fe-Fe distance in Fe2/NC is crucial for the O2 adsorption on catalytic sites and facilitating the subsequent protonation process, thereby boosting catalytic performance. This work not only introduces a new approach for fabricating atomically precise DACs, but also offers a deeper understanding of the intermetallic distance effect on dual-site catalysis.

Sublimation Transformation Synthesis of Dual‐Atom Fe Catalysts for Efficient Oxygen Reduction Reaction

Dual‐atom catalysts (DACs) have garnered significant interest due to their remarkable catalytic reactivity. However, achieving atomically precise control in the fabrication of DACs remains a major challenge. Herein, we developed a straightforward and direct sublimation transformation synthesis strategy for dual‐atom Fe catalysts (Fe2/NC) by utilizing in situ generated Fe2Cl6(g) dimers from FeCl3(s). The structure of Fe2/NC was investigated by aberration‐corrected transmission electron microscopy and X‐ray absorption fine structure (XAFS) spectroscopy. As‐obtained Fe2/NC, with a Fe–Fe distance of 0.3 nm inherited from Fe2Cl6, displayed superior oxygen reduction performance with a half‐wave potential of 0.90 V (vs. RHE), surpassing commercial Pt/C catalysts, Fe single‐atom catalyst (Fe1/NC), and its counterpart with a common and shorter Fe–Fe distance of ~0.25 nm (Fe2/NC‐S). Density functional theory (DFT) calculations and microkinetic analysis revealed the extended Fe–Fe distance in Fe2/NC is crucial for the O2 adsorption on catalytic sites and facilitating the subsequent protonation process, thereby boosting catalytic performance. This work not only introduces a new approach for fabricating atomically precise DACs, but also offers a deeper understanding of the intermetallic distance effect on dual‐site catalysis.

Ultrafast joule-heating synthesis of FeCoMnCuAl high-entropy-alloy nanoparticles as efficient OER electrocatalysts

High entropy alloys (HEAs), known for their synergistic orbital interactions among multiple elements, have been recognized as promising electrocatalysts for enhancing the sluggish kinetics of oxygen evolution reaction (OER). Despite their potential, the facile and rapid preparation of HEA nanoparticles (NPs) with high electrocatalytic activity remains challenging. Here, we report an ultrafast synthesis of noble-metal-free FeCoMnCuAl HEA NPs loaded on conductive carbon fiber networks using a Joule heating strategy. The prepared HEA NPs exhibited a face-centered cubic (FCC) structure with an average size of approximately 25 ​nm. Synchrotron X-ray absorption fine structure (XAFS) and X-ray photoelectron spectroscopy (XPS) studies were performed to investigate the atomic and electronic structures of the HEA NPs, revealing the co-presence of Fe, Co, Mn, Cu and Al elements as well as their different valences across surface and internal regions. The HEA NPs showed remarkable OER performance, exhibiting an overpotential of 280 ​mV at 10 ​mA ​cm−2 and a low Tafel slope of 76.13 ​mV dec−1 in a 1.0 ​M KOH solution with high electrochemical stability, superior to commercial RuO2 electrocatalysts. This work provides a new approach for synthesizing nanoscale noble-metal-free HEA electrocatalysts for clean energy conversion applications on a large-scale basis for practical commercialization.

Covalent Organic Framework Stabilized Single CoN4Cl2 Site Boosts Photocatalytic CO2 Reduction into Tunable Syngas.

Solar carbon dioxide (CO2) reduction provides an attractive alternative to producing sustainable chemicals and fuel. However, the construction of a highly active photocatalyst was challenging because of the rapid charge recombination and sluggish surface CO2 reduction. Herein, a unique Co-N4Cl2 single site was fabricated by loading Co species into the 2,2'-bipyridine and triazine-containing covalent organic framework (COF) for CO2 conversion into syngas under visible light irradiation. The resulting champion catalyst TPy-COF-Co enabled a record-high CO production rate of 426 mmol g-1 h-1, associated with the unprecedented turnover number (TON) and turnover frequency (TOF) of 2095 and 1607 h-1, respectively. The catalyst also exhibited favorable recycling performance and widely adjustable syngas production (CO/H2 ratio: 1.8:1-1:16). A systematical investigation includingoperandosynchrotron X-ray absorption fine structure (XAFS) spectroscopy, in-situ attenuated total reflection surface-enhanced infrared absorption spectroscopy (ATR-SEIRAS), and theoretical calculation indicated that the triazine-based COF framework promoted the charge transfer towards the single Co-N4Cl2 sites that greatly promoted the CO2 activation by lowering the energy barrier of *COOH generation, facilitating the CO2 transformation. This work highlights the great potential of the molecular regulation of COF-derived single-atom catalysts to boost CO2 photoreduction efficiency.

Rapid Oxidative Dissolution of Zerovalent Iron Induced by Sulfite for Efficient Removal of Arsenate and Arsenite: Selective Formation of Scorodite.

In this study, we proposed a moderate oxidation strategy for accelerating the oxidative dissolution of zerovalent iron (ZVI) using sulfite (S(IV)), thereby improving the removal of As(V) and As(III). Results revealed that, in the presence of 2.0 mM S(IV), both As(V) and As(III) were selectively converted into scorodite at pH0 3.0-7.0, while As(III) oxidation and As(V) immobilization were impressed over pH0 8.0-10.0. Batch experiments, radical quenching experiments, and electron spin resonance (ESR) measurements demonstrated that ZVI initially boosted S(IV) activation to generate SO4•-, •OH, and protons, and in turn, ZVI was further oxidized more intensely by these radicals than by oxygen. Concurrently, substantial protons derived from S(IV) oxidation neutralized hydroxyls produced by ZVI oxidation, maintaining an acidic environment conducive to the generation of scorodite rather than iron (hydr)oxides. Characterizations of X-ray diffraction (XRD), Raman, attenuated total reflectance-Fourier transform infrared (ATR-FTIR), X-ray photoelectron spectroscopy (XPS), X-ray absorption fine structure (XAFS), field emission scanning electron microscopy (FESEM), and high-resolution transmission electron microscopy (HRTEM) confirmed that scorodite was formed in situ and then exfoliated from the surface of ZVI, and approximately 75% of ZVI could still be recovered, which contributed to efficient As removal in successive runs and real As-polluted wastewater. The application of S(IV) achieved a balance among ZVI reactivity improvement, As(V)/As(III) removal, and raw material consumption, making it a promising approach for addressing arsenic contamination in wastewater treatment.

Redox conditions influence the chemical composition of iron-associated organic carbon in boreal lake sediments: A synchrotron-based NEXAFS study

The global carbon and iron cycles are intimately linked as redox-sensitive iron oxides readily bind organic carbon in a variety of environmental settings, including marine and lacustrine sediments. While these iron-organic carbon complexes sequester vast quantities of organic carbon, the composition of the organic matter within them remains unknown for lacustrine environments. Here we present C K1s and Fe L3,2 edge Near Edge X-ray Absorption Fine Structure (NEXAFS) spectra of surface sediments and authigenic iron complexes from adjacent basins of a pristine boreal lake located in Québec, Canada, with contrasting oxygen exposure regimes. We demonstrate differences in organic carbon speciation in sediments from both basins, as well as co-localization of organic carbon and iron on a sub-micron scale in 100 nm thick samples. Differences in redox cycling across these two basins allow for a direct comparison of the effect of oscillating redox conditions on the composition of organic carbon sequestered by iron. Our results suggest that reactive organic molecules, which may be polysaccharides, were found preferentially associated with iron in the perennially oxic sediments compared to more phenol rich organics in the seasonally anoxic sediments, highlighting the importance of iron oxides in the protection and preservation of labile organic compounds. Traces of aliphatic carbon were observed in sediments from the anoxic basin, alongside carboxyl and aromatic functionalities. This carboxyl-rich aliphatic material could possibly interact with the sediment mineral matrix either through a ligand exchange mechanism between the mineral phases and the carboxyl functionalities, or via non-specific hydrophobic interactions involving the aliphatic moieties. Finally, our work also shows that OC:Fe ratios should be used with caution when inferring a binding mechanism between OC and iron oxides.

Ca2+-controlled Mn(II) removal process in Aurantimonas sp. HBX-1: Microbially-induced carbonate precipitation (MICP) versus Mn(II) oxidation

The application of manganese-oxidizing bacteria (MnOB) to produce manganese oxides (MnOx) has been widely studied, but often overlooking the concurrent formation of MnCO3. In this study, we found Ca2+ plays a crucial role in controlling Mn(II) removal in the bacterium Aurantimonas sp. HBX-1. Under conditions with 6.8 mM Ca2+ and without adding Ca2+, 100 μM Mn(II) was removed by 96.96 % and 38.28 % within 8 days, respectively. X-ray photoelectron spectroscopy (XPS) showed that adding Ca2+ increased the average oxidation state (AOS) of the solid products from 2.05 to 2.37. X-ray absorption fine structure (XAFS) analysis revealed the product proportions as follows: under Ca2+-supplemented condition, the ratio of MnOx (1 < x ≤ 2) to MnCO₃ was 52 % to 28.1 %, while under Ca2+-free condition, the ratio shifted to 4.6 % for MnOx (1 < x ≤ 2) and 55.2 % for MnCO₃. Urease activity assay and proteomic analysis confirmed the expression of urease and carbonic anhydrase, leading to the formation of MnCO3. Additionally, animal heme peroxidase (AHP) in strain HBX-1 was found to be responsible for Mn(II) oxidation through superoxide production, with Ca2+ addition promoting its expression level. Given the widespread presence of Ca2+ in wastewater, its potential impact on the biogeochemical Mn(II) cycle driven by bacteria should be reconsidered.

Capturing low-concentration benzene: Design and mechanism of high-performance Cu1-Ox,Ny-C single-atom adsorbents

Common adsorbents, such as active carbons, zeolites, and metal–organic frameworks (MOFs), struggle to capture low concentrations of benzene. Single-atom adsorbents (SAAs), boasting exceptional atomic utilization efficiency and precisely tailored electronic structures, offer a promising solution. This study first designed Cu1-Ox,Ny-C SAAs and explored their enhanced benzene adsorption through density functional theory (DFT). Particularly, a crucial link between the SA coordination configuration and its affinity for benzene was established. Next, Cu1-Ox,Ny-C was synthesized from the MOF MIL-101(Cr) and extensively characterized using high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption fine structure (XAFS) spectroscopy, etc. to determine the coordination configuration of Cu single atoms. Finally, a thorough evaluation of the Cu1-Ox,Ny-C’ capacity and stability was conducted. Theoretical analysis revealed that Cu single atoms within the Ox,Ny-C matrix act as the primary adsorption sites for benzene. Notably, O and N atoms work synergistically: oxygen atoms promote adsorption, while nitrogen atoms mainly stabilize single-atom sites. Cu1-Ox,Ny-C was successfully synthesized, and characterization revealed that Cu1-O2,N2(trans)-C and Cu1-O3,N1-C were the dominant coordination configurations. Remarkably, despite a fourfold decrease in specific surface area compared to MIL-101(Cr), Cu1-Ox,Ny-C exhibited a threefold increase in chemisorption capacity for low-concentration benzene. Moreover, it exhibits excellent resistance to H2O and can be effectively reused. This study demonstrates a valuable strategy for designing and creating highly efficient SAAs for capturing low concentrations of benzene.

Formation of low-coordination Pt clusters on Al vacancy-induced CoAl layered double hydroxides-derived oxides enhances low-temperature oxidation performance of HCHO

Noble metal loading and oxygen vacancy construction are prevalent strategies to enhance catalyst performance in HCHO catalytic oxidation. For noble metal systems, most cutting-edge research focuses on single atoms, including the exploration of coexistence between single atoms and clusters, yet there are few reports on the impact of noble metal clusters with different coordinations on catalyst performance. Additionally, investigations into metal vacancies, as opposed to oxygen vacancies, are also scarce. In this work, we used CoAl layered double hydroxides (LDHs) as a precursor, which, after calcination and etching, yielded derived oxides with Al vacancies (LDO5). Pt was then loaded onto the surface of these oxides via impregnation (Pt/LDO5). Activity tests demonstrated that Pt/LDO5 exhibited superior HCHO oxidation activity, especially at low temperatures, compared to Pt/LDO. Utilizing high-resolution transmission electron microscopy (HRTEM) and X-ray absorption fine structure (XAFS), we discovered that, in contrast to the “standard” Pt clusters on the LDO surface, Pt primarily existed as low-coordination clusters on the LDO5 surface, even with a higher Pt loading. Moreover, the coexistence of Al vacancies and low-coordination Pt clusters effectively enhanced the spin state of Co species in the support and altered the direction of electron transfer between Pt and the support.

Visible light driven (VLD) reduced TiO2-x nanocatalysts designed by inorganic and organic reducing agent-mediated solvothermal methods for electrocatalytic and photocatalytic applications.

This work presents a comparative study on the structural, optical and electrochemical characteristics of visible light driven (VLD) reduced titanium dioxide (TiO2-x ) nanocatalysts synthesized via inorganic and organic synthetic routes. X-ray diffraction (XRD) patterns, Raman spectra and X-ray absorption fine structure (XAFS) analyses reflected anatase phase titania. Whereas, the quantitative EXAFS fit and XANES analysis revealed structural distortion due to the presence of oxygen and titanium vacancies with low valent Ti states in anatase lattices of certain nanocatalysts, which subsequently leads to better electrochemical and photocatalytic activities. Moreover, owing to the large surface area and mesoporous structures, the Mg-TiO2-x nanocatalysts exhibited enhanced water adsorption and ultimately increased overall water splitting with an OER overpotential equal to 420 mV vs. RHE at a current density of 10 mA cm-2 (Tafel slope = 62 mV dec-1), extended visible light absorbance, decreased photoluminescence (PL) intensity and increased carrier lifetime in comparison with commercial titania.

Thermally stable high-loading single Cu sites on ZSM-5 for selective catalytic oxidation of NH3

Rigorous comparisons between single site- and nanoparticle (NP)-dispersed catalysts featuring the same composition, in terms of activity, selectivity, and reaction mechanism, are limited. This limitation is partly due to the tendency of single metal atoms to sinter into aggregated NPs at high loadings and elevated temperatures, driven by a decrease in metal surface free energy. Here, we have developed a unique two-step method for the synthesis of single Cu sites on ZSM-5 (termed CuS/ZSM-5) with high thermal stability. The atomic-level dispersion of single Cu sites was confirmed through scanning transmission electron microscopy, X-ray absorption fine structure (XAFS), and electron paramagnetic resonance spectroscopy. The CuS/ZSM-5 catalyst was compared to a CuO NP-based catalyst (termed CuN/ZSM-5) in the oxidation of NH3 to N2, with the former exhibiting superior activity and selectivity. Furthermore, operando XAFS and diffuse reflectance infrared Fourier transform spectroscopy studies were conducted to simultaneously assess the fate of the Cu and the surface adsorbates, providing a comprehensive understanding of the mechanism of the two catalysts. The study shows that the facile redox behavior exhibited by single Cu sites correlates with the enhanced activity observed for the CuS/ZSM-5 catalyst.

The Configuration Identification of Guanine Molecules Adsorbed on the Si(100) Surface by Using XPS Shake-up Satellites and NEXAFS.

Bioelectronic devices can be manufactured by organic-inorganic hybrid systems based on biomolecules and silicon semiconductors. The performance of the hybrid systems is largely determined by the adsorption manners of biomolecules on the silicon surface. In this paper, we demonstrated that the X-ray photoelectron spectroscopy (XPS) shake-up satellites and near-edge X-ray absorption fine-structure (NEXAFS) spectra at the carbon K-edges can be used to distinguish the interface of guanine molecules anchored on Si(100) surface. There are only 9 possible stable guanine@Si(100) hybrid systems that have been found based on the density functional theory. According to the characteristic peaks, it is confirmed that NEXAFS spectra are more sensitive to the identification of adsorption configurations. While the first characteristic peak in the low energy region of NEXAFS spectra are capable of distinguishing chemical bonds at the interface of the adsorption configurations. These results may facilitate a better understanding of the interface formations between biomolecules and silicon surfaces, which could be further utilized for the new bioelectronic device design.

Engineering single-atom rhodium-C3N sites on covalent organic frameworks for boosting photocatalytic hydrogen evolution

Developing efficient and stable photocatalysts for solar hydrogen (H2) energy conversion is meaningful but challenging. Herein, a novel photocatalyst with Rh single atoms (Rh SAs) anchoring in β-ketoimine-linked covalent organic frameworks (TpPa-1) via RhC3N sites is proposed for achieving highly efficient H2 production in phosphate buffer saline (PBS) solution with sodium ascorbate (SA) as sacrificial agent under visible light. TpPa-1 with abundant N and C-chelate sites provides a reliable basis for anchoring Rh single atoms. The optimized Rh SAs/TpPa-1 exhibits an outstanding hydrogen evolution activity (1836.81μmol h−1 g−1), 9.34 and 2.27 folds enhancement than that of pristine TpPa-1 and Rh NPs/TpPa-1. X-ray absorption fine structure (XAFS) combined with density functional theory (DFT) calculations reveal that the significant improvement in H2 evolution performance on Rh SAs/TpPa-1 originates from the unique RhC3N coordination environment, promoting the charge separation and migration at the atomic interface, and thus decreasing the energy barrier for H* formation. Notably, in situ Raman technique confirmed Rh SAs was the main active sites (RhH) for proton reduction.

Extended X-ray absorption spectroscopy using an ultrashort pulse laboratory-scale laser-plasma accelerator

Laser-driven compact particle accelerators can provide ultrashort pulses of broadband X-rays, well suited for undertaking X-ray absorption spectroscopy measurements on a femtosecond timescale. Here the Extended X-ray Absorption Fine Structure (EXAFS) features of the K-edge of a copper sample have been observed over a 250 eV window in a single shot using a laser wakefield accelerator, providing information on both the electronic and ionic structure simultaneously. This capability will allow the investigation of ultrafast processes, and in particular, probing high-energy-density matter and physics far-from-equilibrium where the sample refresh rate is slow and shot number is limited. For example, states that replicate the tremendous pressures and temperatures of planetary bodies or the conditions inside nuclear fusion reactions. Using high-power lasers to pump these samples also has the advantage of being inherently synchronised to the laser-driven X-ray probe. A perspective on the additional strengths of a laboratory-based ultrafast X-ray absorption source is presented.

Highly efficient uranium uptake by the eco-designed cocamidopropyl betaine-decorated Na-P1 coal fly-ash zeolite

In some locations around the globe, the U concentrations may exceed WHO standards by 2-folds therefore, effective yet environmentally wise solutions to purify radioactive waters are of significant importance. Here, the optimized and fully controlled coal-fly-ash based Na-P1 zeolite functionalization by employing novel, biodegradable biosurfactant molecule - cocamidopropyl betaine (CAPB) is showcased. The zeolite’s surface decoration renders three composites with varying amounts of introduced CAPB molecule (Na-P1 @ CAPB), with 0.44, 0.88, and 1.59-times External Cation Exchange Capacity (ECEC). Wet-chemistry experiments revealed extremely high U adsorption capacity (qmax = 137.1 mg U/g) unveiling preferential interactions of uranyl dimers with CAPB molecules coupled with ion-exchange between Na+ ions. Multimodal spectroscopic analyses, including Fourier-Transformed Infra-Red (FT-IR), X-ray Photoelectron (XPS), and X-ray Absorption Fine Structure (XAFS), showed the hexavalent oxidation state of U, and no secondary release of the CAPB molecule from the composite. The EXAFS signals fingerprint changes in the interatomic distances of adsorbed U, showing the impact of the O and N, heteroatoms present in the CAPB molecule on U binding mechanism. The presented research outcomes showcase the easy, scalable, optimized, and environmentally friendly synthesis of biofunctional zeolite effectively purifying the real-life U-bearing wastewaters from the vicinity of the Pribram deposit (Czech Republic).

Modulating the electronic structure of macroporous SrTiO3 through cobalt doping for enhance photocatalytic hydrogen evolution

The modulation of electronic structure plays a crucial role in enhancing the adsorption of H* for photocatalytic hydrogen evolution. In this study, we prepared a three-dimensionally ordered macroporous structure of cobalt doping SrTiO3 (Co/3DOMSTO) to provide a large specific surface area that exposes more active sites. The prepared catalysts exhibited the highest rate of photocatalytic hydrogen evolution, reaching 5892.86 μmol g−1 h−1, along with an apparent quantum efficiency (AQE) of approximately 2.4% under illumination at 427 nm. Additionally, the introduction of metal cobalt helped to modulate the electronic structure of Co/3DOMSTO and facilitate spatial charge separation. X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculations were conducted to demonstrate that cobalt occupied the Ti sites on the surface of 3DOMSTO, resulting in changes in the electronic distribution state within space. This phenomenon facilitates the enrichment of electrons at the adjacent Ti sites, making the charge-rich Ti a new active site. These findings underscore the pivotal role played by the geometric configuration and tailored electronic structure of 3DOMSTO in augmenting its photocatalytic performance.

A triple-benefit strategy of microstructure, electronic property and active site modulation on ZnIn2S4 photocatalyst by Sn atom doping

To overcome the high cost and complex preparation of cocatalysts in photocatalytic H₂ production, this study pioneers a triple-benefit strategy in visible-light-absorbing semiconductors through microstructure optimization, electronic property modulation, and active site modification in two-dimensional (2D) hexagonal ZnIn₂S₄ (ZIS) via Sn atom doping. Facilely synthesized through a one-step hydrothermal method without surfactants, 4–6 nm thick Sn-doped ZIS nanosheets exhibit reduced charge recombination by preventing excessive self-assembly and aggregation. Density Functional Theory (DFT) and X-ray Absorption Fine Structure (XAFS) confirm Sn’s substitution for Zn on (001) surface, shifting the Fermi level into the conduction band to facilitate electron migration and charge separation. This adjustment also modulates the electronic properties of adjacent S atoms, triggering the inert basal plane for an enhanced H₂ evolution reaction kinetics. Consequently, Sn-ZIS achieves a H₂ evolution rate of 62.18 μmol h−1 under visible light, significantly outperforming pure ZIS and Pt@ZIS by 6.7 and 3.5 times, respectively.

General negative pressure annealing approach for creating ultra-high-loading single atom catalyst libraries

Catalyst systems populated by high-density single atoms are crucial for improving catalytic activity and selectivity, which can potentially maximize the industrial prospects of heterogeneous single-atom catalysts (SACs). However, achieving high-loading SACs with metal contents above 10 wt% remains challenging. Here we describe a general negative pressure annealing strategy to fabricate ultrahigh-loading SACs with metal contents up to 27.3–44.8 wt% for 13 different metals on a typical carbon nitride matrix. Furthermore, our approach enables the synthesis of high-entropy single-atom catalysts (HESACs) that exhibit the coexistence of multiple metal single atoms with high metal contents. In-situ aberration-corrected HAADF-STEM (AC-STEM) combined with ex-situ X-ray absorption fine structure (XAFS) demonstrate that the negative pressure annealing treatment accelerates the removal of anionic ligand in metal precursors and boosts the bonding of metal species with N defective sites, enabling the formation of dense N-coordinated metal sites. Increasing metal loading on a platinum (Pt) SAC to 41.8 wt% significantly enhances the activity of propane oxidation towards liquid products, including acetone, methanol, and acetic acid et al. This work presents a straightforward and universal approach for achieving many low-cost and high-density SACs for efficient catalytic transformations.

Vitrification of Cerium(Ⅲ) fluoride in iron phosphoborate glasses: A study on redox, structure, and stability

Cerium fluoride was vitrified to simulate actinide fluoride waste from high-level waste salt produced through dry reprocessing in a Molten Salt Reactor. Iron phosphoborate and phosphoborate glass were used to immobilize CeF3 and investigate the relationship between redox, structure and chemical stability of these glass wasteforms. The findings indicate that CePO4 crystals precipitated when the molar content of CeF3 exceeded 28.9 wt% in iron phosphoborate glass, as observed by X-ray Diffraction (XRD). X-ray Photoelectron Spectroscopy (XPS) was used to investigate the changes in the valence of Ce and Fe in both types of glass. Results showed that adding of CeF3 increased the fraction of Fe2+. In iron phosphoborate glass, Ce was mainly trivalent, whereas in phosphoborate glass, most Ce was oxidized to Ce4+. Raman analysis indicates that cerium-containing iron phosphoborate glass exhibits a pyrophosphate structure, while cerium-containing phosphoborate glass displays a metaphosphate structure. Results from Mössbauer Spectroscopy and X-ray Absorption Fine Structure (XAFS) indicate that iron predominately exists as Fe–O tetrahedral clusters within the glass, showcasing excellent stability. This is evident from the strong resistance to elemental leaching in the leaching test of the iron phosphoborate glass with cerium content.

Spinel cobalt-based binary metal oxides as emerging materials for energy harvesting devices: synthesis, characterization and synchrotron radiation-enabled investigation.

The synthesis and characterization of spinel cobalt-based metal oxides (MCo2O4) with varying 3d-transition metal ions (Ni, Fe, Cu, and Zn) were explored using a hydrothermal process (140 °C for two hours) to be used as alternative counter electrodes for Pt-free dye-sensitized solar cells (DSSCs). Scanning electron microscopy (SEM) and atomic force microscopy (AFM) revealed distinct morphologies for each metal oxide, such as NiCo2O4 nanosheets, Cu Co2O4 nanoleaves, Fe Co2O4 diamond-like, and Zn Co2O4 hexagonal-like structures. The X-ray diffraction analysis confirmed the cubic spinel structure for the prepared MCo2O4 films. The functional groups of MCo2O4 materials were recognized in metal oxides throughout Fourier transform infrared (FTIR) analysis. The local structure analysis using X-ray absorption fine structure (XAFS) at Fe and Co K-edge identified octahedral (Oh) Co3+ and tetrahedral (Td) Co2+ coordination, with Zn2+ and Cu2+ favoring Td sites, while Ni3+ and Fe3+ preferred Oh active sites. Further investigations utilizing the Fourier transformation (FT) analysis showed comparable coordination numbers and interatomic distances ranked as Co-Cu > Co-Fe > Zn-Co > Co-Ni. Furthermore, the utilization of MCo2O4 thin films as counter electrodes in DSSC fabrication showed promising results. Notably, solar cells based on CuCo2O4 and ZnCo2O4 counter electrodes showed 1.9% and 1.13% power conversion efficiency, respectively. These findings indicate the potential of employing these binary metal oxides for efficient and cost-effective photovoltaic device production.