Wufeng Formation Research Articles

The Effect of Diagenetic Modifications on Porosity Development in the Upper Ordovician to Lower Silurian Wufeng and Longmaxi Formations, Southeast Sichuan Basin, China

The Effect of Diagenetic Modifications on Porosity Development in the Upper Ordovician to Lower Silurian Wufeng and Longmaxi Formations, Southeast Sichuan Basin, China

New Evidences of Fluid Inclusions from Wufeng Formation Reveal Shale Gas Accumulation and Leakage Histories in Northern Guizhou, Southwestern China

Abstract Shale gas accumulation and leakage histories are significant for evaluating the prospects of hydrocarbon exploration. The Wufeng Formation in northern Guizhou is a potential target for shale gas exploration and development. This work selected a typical Well YH1 to conduct detailed fluid inclusion analyses in the Wufeng Formation. We integrated the inclusion results with systematic core description, thin-section microscopic observation, laser Raman spectroscopy, microscopic temperature measurement, and burial–thermal history to reveal shale gas accumulation and leakage histories in northern Guizhou. The results show that the source rocks of the Wufeng Formation occurred in oil generation since the Permian and entered the stage of natural gas generation at the end of the Late Triassic. During the Early Jurassic and Early Cretaceous, shale gas accumulated in the Wufeng Formation reservoirs, and the stratigraphical pressure coefficient ranged from 1.47 to 1.97. Under the influence of the Yanshan orogeny, northern Guizhou experienced a rapid uplift and exhumation since the end of the Early Cretaceous. Under the influence of this tectonic, the stratigraphical pressure plummeted to the normal level, adversely impacting the accumulated shale gas in reservoirs and resulting in leakage events since the end of the Early Cretaceous. The reservoirs were further destroyed and adjusted, and the gas continued to leak because of a long-term and large-scale uplift and exhumation during the Himalayan orogeny. This work clarified that shale gas accumulation and leakage histories are significant for evaluating petroleum exploration.

Geochemical Features, Origin, and Depositional Environment of Late Ordovician–Early Silurian Wufeng and Longmaxi Formation Cherts in the Southeastern Sichuan Basin

Geochemical Features, Origin, and Depositional Environment of Late Ordovician–Early Silurian Wufeng and Longmaxi Formation Cherts in the Southeastern Sichuan Basin

Shale pore characteristics and their impact on the gas-bearing properties of the Longmaxi Formation in the Luzhou area

Deep shale has the characteristics of large burial depth, rapid changes in reservoir properties, complex pore types and structures, and unstable production. The whole-rock X-ray diffraction (XRD) analysis, reservoir physical property parameter testing, scanning electron microscopy (SEM) analysis, high-pressure mercury intrusion testing, CO2 adsorption experimentation, and low-temperature nitrogen adsorption–desorption testing were performed to study the pore structure characteristics of marine shale reservoirs in the southern Sichuan Basin. The results show that the deep shale of the Wufeng Formation Longyi1 sub-member in the Luzhou area is superior to that of the Weiyuan area in terms of factors controlling shale gas enrichment, such as organic matter abundance, physical properties, gas-bearing properties, and shale reservoir thickness. SEM is utilized to identify six types of pores (mainly organic matter pores). The porosities of the pyrobitumen pores reach 21.04–31.65%, while the porosities of the solid kerogen pores, siliceous mineral dissolution pores, and carbonate dissolution pores are low at 0.48–1.80%. The pores of shale reservoirs are mainly micropores and mesopores, with a small amount of macropores. The total pore volume ranges from 22.0 to 36.40 μL/g, with an average of 27.46 μL/g, the total pore specific surface area ranges from 34.27 to 50.39 m2/g, with an average of 41.12 m2/g. The pore volume and specific surface area of deep shale gas are positively correlated with TOC content, siliceous minerals, and clay minerals. The key period for shale gas enrichment, which matches the evolution process of shale hydrocarbon generation, reservoir capacity, and direct and indirect cap rocks, is from the Middle to Late Triassic to the present. Areas with late structural uplift, small uplift amplitude, and high formation pressure coefficient characteristics favor preserving shale gas with high gas content and production levels.

Elemental Geochemical Characteristics of Shales from Wufeng-Longmaxi Formations in the Southern Margin of the Qinling Orogenic Belt, China: Implications for Depositional Controls on Organic Matter.

The tectonic background and sedimentary environment during the transition period from the Ordovician to Silurian have been widely studied by many scholars. This study focuses on the Upper Ordovician Wufeng Formation and Lower Silurian Longmaxi Formation in the Bajiaokou profile at the southern margin of the Qinling Orogenic Belt in southern China. In order to study the aggregation mechanism of organic matter, geochemical proxies were proposed, including redox proxies (V, V/Al, U, U/Al, Mo, and Mo/Al), paleoproductivity proxies (P, P/Ti, Ba, Ba/Al, and SiXS), paleoclimate proxies (CIA), and terrigenous flux proxies (Al, Zr, and Zr/Al). In addition, Al-Co[EF] × Mn[EF] is used to provide information on paleoenvironmental parameters such as watermass restriction conditions. The redox proxies show that the Wufeng-Longmaxi shale is mainly accumulated under oxic-dysoxic conditions. During the shale deposition period of Wufeng-Longmaxi formations, the marine surface primary productivity in the southern Qinling area is generally low to moderate. The paleoclimate proxies show that from the Late Ordovician to the Early Silurian the southern Qinling area generally had a warm and humid climate. The upwelling current is widely developed in the northern margin of the Sichuan Basin and the southern margin of the Qinling area. Although the upwelling current was highly developed during the deposition of the Wufeng Formation in the Bajiaokou profile, the concentrated accumulation of a large amount of volcanic ash resulted in the low primary productivity of the ocean. During the sedimentary period of the Longmaxi Formation in the Bajiaokou profile, the development of seasonal upwelling currents and a small amount of volcanic ash supply increased the primary productivity to moderate, which provided a good material basis for the enrichment of organic matter, but the high detritus flux and the water body condition of oxic-dysoxic resulted in the slight enrichment of organic matter.

Development characteristics and controlling mechanism of different microfracture combinations in shale reservoir: A case study of silurian longmaxi formation in Weiyuan area

Fractures in organic-rich shale are important reservoir spaces and seepage channels of shale gas, and they are closely related to the gas-bearing properties of shale. The development characteristics and laws of fractures are of great significance in the exploration and development of shale oil and gas. This study examines organic-rich shales of the Wufeng–Longmaxi Formation in the Weiyuan area of the Sichuan Basin. On the basis of two-dimensional large-area multi-scale combination electron microscopy characterization and digital core platform technology, the development degree and distribution of different fractures are quantitatively characterized. The results show the following. (1) The shale of the Wufeng and Longmaxi formations developed a variety of fractures with different occurrences, sizes, and origins. According to the number and combination relationship between fractures of different occurrences, the shale can be divided into four fracture combination types: horizontal bedding fractures; vein fractures; reticular fractures; and ring fractures. Of these, the horizontal bedding fracture group has the largest number of samples and a higher average fracture surface porosity. (2) The degree of fracture development in the shale is affected by many factors, such as the laminar type, mineral composition, mineral particle size, mineral distribution, and total organic carbon, and the controlling mechanisms of different fracture combination types differ. Factors such as horizontal stratification, high clay mineral content, and uneven mineral particle size are conducive to the development of horizontal bedding joints. (3) Differences in the sedimentary environment affect the variation laws of the vertical fracture combination types and density. The total organic carbon and organic quartz content of the Long111 layer with deeper sedimentary water is higher, and the vein fracture formation is more developed than in other small layers, while the clay mineral content of the Long112 and Long114 layers with shallower sedimentary water is higher and the horizontal layer is more developed; the fracture combination type is dominated by the horizontal bedding fracture combination. At the same time, the fractures at the junction of each layer of the Long11 sub-member are the most developed because sea level rise and fall make the mineral particle size heterogeneity most prominent at the junction of the small layer.

Mercury isotopes of the Late Ordovician to Middle Triassic tuff layers in South China link the fate of ancient volcanism and the mass extinction

Mercury (Hg) anomalies in sedimentary records are a newly developed proxy of large volcanism in the geological past. Tuff layers host abundant volcanic ash and record key information on the type of volcanic emission (e.g., arc volcanism and large igneous province eruptions). Here, we measured the Hg isotopic compositions of several tuff layers in South China. Tuff samples in the Late Ordovician Wufeng Formation and the Middle Triassic Guanling Formation mostly show positive Δ199Hg values of – 0.01 to 0.10‰ and – 0.06 to 0.16‰, respectively, suggesting arc volcanism occurred during these two periods. Tuff samples in the Middle Permian Dachang Layer mostly show near-zero Δ199Hg values (– 0.08 to 0.00‰), suggesting volcanism was driven by the Emeishan large igneous province eruption. Results of this study verify Hg isotopes as a useful proxy in revealing the type of volcanism in geological history.

Fluid inclusion evidence for overpressure-induced self-sealing and accumulation of deep shale gas

Shale oil and gas exploration and development are extending to greater depths, and it is important to understand the accumulation mechanisms of shale oil and gas. Here we conducted a case study in the Upper Ordovician Wufeng Formation–Lower Silurian Longmaxi Formation in the Ningxi area, Sichuan Basin, southwest China, by using petrological and fluid inclusion investigation to determine the processes involved during the overpressure-induced self-sealing accumulation of deep shale gas. Results show that fibrous quartz–calcite veins in the source rocks contain abundant gas inclusions and coeval two-phase gas–liquid aqueous inclusions. The gas inclusions are relatively uniform, translucent to transparent, single-phase inclusions with a high density, indicative of a closed shale system. The gas inclusions record varying levels of fluid overpressure (115.23–169.46 MPa), with a paleo-pressure coefficient of 2.12–2.98. Fluid overpressure and self-sealing resulted in shale gas accumulation, with bedding-parallel and laminar fractures acting as important migration pathways, which improved the horizontal porosity and permeability of the shale. These processes are common and important phenomena in petroleum systems. Unconventional oil and gas development commonly requires horizontal fracturing of wells to form a fracture network, which can improve the production capacity.

Depositional Model and Controlling Factors of High-Quality Shales of the Wufeng and Longmaxi Formations in Western Chongqing, Sichuan Basin, China.

The enrichment of organic matter is the foundation for a high-quality shale deposition. It is generally believed that high productivity and persistent anoxic conditions facilitate the preservation and enrichment of organic matter. However, there is a lack of investigation into how the dynamic combination of productivity and anoxia affects organic matter enrichment. Here, the black shales of the Wufeng Formation and Longmaxi Formation in the western Chongqing area were selected, where oceanic anoxia and high productivity evolved as a function of the water depth. The main findings were as follows: (1) the distribution of high-quality shales in the Upper Ordovician Wufeng Formation and the Lower Silurian Longmaxi Formation is closely related to the oxygen minimum zone (OMZ), indicating that the physicochemical conditions within the OMZ zone facilitated the development of high-quality shale; (2) in the late period of the Wufeng Formation, intense ocean upwelling in the middle shelf and outer shelf regions caused high productivity where thick-bedded high-quality shales were deposited; and (3) in the early period of the Longmaxi Formation, ocean upwelling weakened, accompanied by the expansion of the OMZ to shallow water regions, and high-quality shales were widely distributed. Based on the above findings, two depositional models were proposed to account for the formation of high-quality shales, and it is suggested that intense ocean upwelling during the late period of the Wufeng Formation and OMZ expansion during the early period of the Longmaxi Formation played crucial roles in facilitating the formation of high-quality shales. These two models present the spatial and temporal variability of high-quality shale development for the first time and can guide shale gas exploration and development strategies.

Pyrite morphological evidence for sedimentary conditions of the Wufeng formation–Longmaxi formation in south-east Chongqing area–insights for high-quality shale gas reservoir formation mechanism

As one of the important minerals in marine shale reservoirs, the development characteristics of pyrite can provide guidance for the exploration of deep shale gas resources and the study of high-quality reservoir development mechanisms. In this study, samples of the Wufeng and Longmaxi Formation in the southeast Chongqing area were selected, and the development characteristics of framboidal pyrite were revealed through a combination of qualitative and quantitative method. High-quality reservoirs of the upper Wufeng Formation and the bottom of the Longmaxi Formation are developed with smaller sizes, weaker variation and a narrower size distribution of pyrite framboids compared with other units of the strata, suggesting relatively stable euxinic conditions during deposition. The development characteristics of framboidal pyrite and some of the key reservoir evaluation parameters such as organic matter content and brittle mineral content, etc., are controlled by similar factors. Therefore, pyrite morphological evidence can be used as a potential indicator of high-quality shale reservoirs.

Optimal selection of inversion method for gas-adsorption pore characterization of shales in Wufeng and Longmaxi Formation, Sichuan Basin

The pore space in gas shale spans multiple scales, ranging from nanometers to micrometers with an extremely complex structure and strong microscopic heterogeneity. Existing low-temperature gas adsorption (LTGA) pore size distribution (PSD) analysis models are based on the assumption of a one-dimensional tubular model and there is a lack of sufficient basis for selecting the most appropriate inversion model among the various types available. In this study, a comprehensive characterization of numerous samples from the Wufeng and Longmaxi Formation in the southern Sichuan Basin was conducted using different methods and inversion models. Based on multiple dimensions, such as fitting errors, the correlation between different methods including low-temperature CO2 adsorption (LTCA), nitrogen adsorption (LTNA), and large-scale mosaic Scanning Electron Microscopy (LAM-SEM), the most suitable one-dimensional models for LTCA and LTNA PSD analysis for the studied shale samples are determined. The simulation of gas condensation processes on LAM-SEM images yielded pore volume (PV) in the range of 32–48 nm comparable to the PV characterized by LTNA. Furthermore, the differences observed in PSDs between the gas condensation simulation procedure and the equivalent circular area diameter method indicate that irregular corner regions within larger pores are attributed to the volume of smaller-sized pores during gas adsorption characterization. It is revealed that the correlation between stitched surface area (SA) and maximum methane adsorption is stronger than individual characterizations, indicating that both micropores and mesopores contribute significantly to adsorption, and both characterization methods need to be employed to obtain SSA that influences methane adsorption. The research findings are helpful to the improvement of the multi-scale pore characterization level and evaluation of shale reservoirs.

Sedimentary differentiation caused by glaciation and orogeny during the Ordovician–Silurian transition in the southern Sichuan Basin, China

The Wufeng–Longmaxi shales, which were deposited during the Ordovician–Silurian transition in the southern Sichuan Basin, exhibit distinct lithofacies transitions. The shift from organic-rich siliceous shale to organic-poor mixed shale and argillaceous shale is attributed to the influences of the Hirnantian glaciation and the Kwangsian Orogeny. Nevertheless, debates persist regarding the mechanisms underlying these significant lithofacies transformations. This study employs sequence stratigraphy, petrology, and geochemical analysis of key wells to unveil crucial insights. The findings indicate: 1) the Wufeng Formation to the Long-1 Member could be divided into two third-order sequences; 2) the waterbody underwent a transition from anoxic and strongly restricted conditions to oxic and moderately restricted conditions; and 3) the trend in formation thickness changed from an E–W orientation to a NE–SW orientation. The results suggest that considerable sediment condensation and anoxia resulting from glacier melting in the early Rhuddanian played a pivotal role in the formation of organic-rich siliceous shale. During the Middle Rhuddanian–Aeronian, the accelerated uplift caused by the Kwangsian Orogeny offset the transgression induced by glacier melting, leading to shallow water conditions and increased terrigenous influx. This diluted the organic matter content in the sediment, and subsequent turbidity currents altered sediment composition, driving the lithofacies transformation into organic-poor mixed shale and argillaceous shale. The study posits that the sedimentary differentiation in the southern Sichuan Basin during the Ordovician–Silurian transition is linked to the initiation and progression of the far-field effects of the Kwangsian Orogeny.

Microfacies analysis of marine shale: A case study of the shales of the Wufeng–Longmaxi formation in the western Chongqing, Sichuan Basin, China

Abstract It is a great challenge for sedimentologists to perform the facies analysis of shales due to the lack of macro-structures and high heterogeneity in shale, and thus, conventional research methods are poorly applied in the field of shale sedimentology. To establish a typical depositional model for marine shales, a new method adopted from marine carbonate rocks was employed to perform the microfacies analysis of marine shales of the Wufeng and Longmaxi Formation in Sichuan Basin. This method emphasizes the fact that many skeletal constituents in marine shales have specific bathymetric distributions, allowing for a better understanding of the depositional process of shales. With this approach, a total of nine microfacies were identified and two depositional models for marine shales were proposed. The depositional models show that sea levels were high during the Middle to Late Wufeng period, which was followed by a rapid regression that led to a significant sea-level drop by over 50 m at the topmost of the Wufeng Formation, and consequently, widespread fine-grained sandy shales with large amounts of benthic bioclasts were deposited in the study region. The eustatic sea-level changes recovered by using the method of microfacies analysis are in line with the global trend, indicating that the method has promising applications in the field of marine shale sedimentology.

Developing Characteristics of Shale Lamination and Their Impact on Reservoir Properties in the Deep Wufeng–Longmaxi Formation Shale of the Southern Sichuan Basin

The deep shale of the Wufeng–Longmaxi Formation in the southern Sichuan Basin has high gas potential. The development characteristics of lamination could significantly impact reservoir property. Samples were investigated using microscopic observation, element analysis, organic petrology analysis, mineralogy analysis, and pore structure analysis to determine the types of laminae and laminasets, clarify the formation conditions of argillaceous lamina and silty lamina as well as their relationships with the sedimentary environment, and explore the influence of laminae on shale reservoir property. Results indicate that the Wufeng Formation shale exhibits weak development of laminae due to bioturbation, while the Longmaxi Formation shale develops continuous, parallel, and plate-like laminae. Compared with light silty lamina-rich shale, dark argillaceous lamina-rich shale usually develops in an anoxic reduction environment, with higher total organic carbon content, porosity, pore volume, specific surface area, and more developed organic matter pores, which can provide greater space for shale gas adsorption and storage. Shales in the middle section of the Longmaxi Formation are characterized by the development of silty-argillaceous interbedded type laminaset, which have good reservoir performance, making them the primary target for deep shale gas exploration and development.

Factors controlling the heterogeneity of shale pore structure and shale gas production of the Wufeng–Longmaxi shales in the Dingshan plunging anticline of the Sichuan Basin, China

Shale gas exploration in the Dingshan plunging anticline of the Sichuan Basin, China, has uncovered substantial Wufeng–Longmaxi shale reserves. However, substantial variations exist in shale gas content and production among the wells in this region. We investigated the geological factors and mechanisms influencing shale pore structure heterogeneity and shale gas content and production in the area. We conducted comprehensive analyses of mineralogy, geochemical characteristics, and petrophysical properties on the Late Ordovician Wufeng Formation–Early Silurian Longmaxi Formation shales. Shale samples were collected from a shallow well, Anwen-1, located in proximity to the Qiyueshan thrust fault within the Dingshan plunging anticline. Additionally, samples from Dingye (DY) 1 and DY 3 wells, located at varying distances from the thrust fault, were examined. We also integrated previously published data from two correlative sections in the southeastern margin of the Sichuan Basin, each at different distances from the thrust fault. The pore volume, specific surface area, and porosity of the shales were positively correlated with their total organic content (TOC). However, strong lateral compressive stress, often occurring near the regional thrust fault, attenuated the linear relationship between TOC and pore volume/porosity. Lateral compressive stress did not significant affect shale porosity and pore structure when the distance from the regional thrust fault exceeded approximately 15 km. The specific surface area of the shale was less affected by compressive stress. Moreover, carbonate cementation reduced porosity by sealing shale matrix pores and natural microfractures, reducing nanopore connectivity. Consequently, shale gas production is not solely influenced by shale gas content but is also significantly affected by carbonate cementation. Therefore, shale reservoirs located at relatively long tectonic distances from regional thrust faults (approximately 15 km) within the Dingshan plunging anticline exhibit high pore volume, porosity, and shale gas content, rendering them favorable for shale gas exploration.

Geological factors controlling high flowback rates of shale gas wells in the Changning area of the southern Sichuan Basin, China

In the Changning block of the southern Sichuan Basin, the shale gas wells in the Upper Ordovician Wufeng Formation to Lower Silurian Longmaxi Formation (Wufeng–Longmaxi) demonstrate significant difference in flowback rate of fracturing fluid, given the same fracturing scale and production time. Based on the P90 curve of flowback rate with time, wells with high flowback rates in this area are categorized, and they are generally defined with the 100-day flowback rate of >40%, the 200-day flowback rate of >50%, and the first-year flowback rate >60%. Through comprehensive research on the geological characteristics of the Changning block, the geological factors that cause high gas well backflow rates have been identified. The results are obtained in four aspects. First, gas wells with high flowback rates generally show higher flow rates for smaller distances to the fault, and the NE faults formed during the late Yanshanian to early Himalayan and with fault throw >200 m have the greatest impact on the flowback rate. Second, plane heterogeneity of water saturation contributes to the high flowback rate of some wells. Third, the proportion of the Middle Ordovician Baota Formation in the horizontal section of wells is positively related to the flowback rate, and the drilling and fracturing of the Baota limestone with high water content can lead to high flowback rates of gas wells to some extent. Fourth, unidirectional linear natural fractures between wells can easily cause inter-well frac-hit, leading to high flowback rates of gas wells. In conclusion, the research results are helpful in predicting areas where high backflow rate gas wells may occur and developing corresponding drainage and production methods in advance.

Upwelling-driven biogenic silica accumulation in the Yangtze Sea, South China during Late Ordovician to Early Silurian time: A possible link with the global climatic transitions

Silica accumulation in the Yangtze Sea during the Ordovician–Silurian (O–S) transition appears to have coincided with global climatic fluctuations, widespread upwelling, and volcanism. There is a need to further evaluate their respective contributions to silica deposition and potential relationships among these factors. The current study selected siliceous deposits in the Wufeng and Longmaxi Formations from four sections spanning the inner to outer Yangtze Sea, South China, to gain a deeper understanding of the climatic and oceanographic evolution associated with silica enrichment. Al/(Al + Fe + Mn) values, the presence of radiolarians, and Si isotope values of samples recovered from the investigated shale successions offer compelling evidence that the silica is largely of biogenic origin with some terrigenous contributions. Further, various productivity and redox proxies suggest that biogenic silica (BSi) accumulated under conditions of enhanced marine productivity and anoxic bottom water conditions. Hg/TOC and Zr/Al2O3 profiles suggest intermittent volcanism during the BSi deposition in the Yangtze Sea. However, the lack of correlation between BSi and Hg/TOC values indicates that volcanic iron fertilization was not responsible for BSi accumulation. Instead, most BSi-rich samples are dominated by low MnEF × CoEF values (<0.5), consistent with BSi deposited in modern upwelling settings. Hydrographic reconstruction based on Mo–U covariation indicates a more open water setting in the outer Yangtze Sea, while the coeval inner Yangtze Sea was relatively restricted. Therefore, upwelling events appear to have been more vigorous in the outer Yangtze Sea. Published and new Chemical Index of Alteration (CIA), BSi, and MnEF × CoEF data for the Wufeng and Longmaxi Formations across the inner to outer Yangtze Sea demonstrate that temporal and spatial variations of BSi were controlled by climate-driven upwelling. In particular, cool-water upwelling contemporaneous with Hirnantian glaciation may have been responsible for the establishment of the cool-water fauna of the shallow-water Guanyinqiao Bed and enhanced silica deposition in deeper water. Moreover, a moderate negative relationship between compiled CIA and BSi contents suggests that enhanced upwelling driving BSi accumulation appears to have been favored during cooling events. Integrated analysis of BSi deposits of the Laurentia and Baltica continental margins further suggests that BSi accumulation on continental margins during the O–S transition was primarily influenced by global cooling. Therefore, we suggest that wind patterns or/and thermohaline circulation, influenced by climate fluctuations, induced widespread cold water upwelling events during the O–S transition. Moreover, elevated BSi production diluted accumulating OM resulting in the observed parabolic relationship of BSi and TOC.

The present-day in-situ stress field and its effect on shale gas development in Zigong area of southern Sichuan Basin

The Zigong area in southern Sichuan Basin is one of the key shale gas production areas in China, and the Longmaxi and Wufeng Formations within it are currently the key exploration and development layers. The present-day in-situ stress field has a significant impact on well trajectory deployment, horizontal well construction, hydraulic fracturing and other aspects. However, it has not been finely quantified in shale gas reservoirs of Zigong area, making it difficult to effectively guide development practice. Therefore, this study constructed a geomechanical model of the target layer in the Zigong area, quantitatively characterized the distribution of present-day in-situ stress, and explored its shale gas development effects. The results show that: (1) Based on the analysis of drilling induced fractures obtained from rock acoustic emission experiments and imaging logging interpretation, the dominant orientation of the maximum horizontal principal stress in the target layer is mainly NW-SE-trending; (2) The horizontal principal stress difference in the Layer S1l1-1−1 and Wufeng Formation is 5–30 MPa (the majority is 6–15 MPa) and 5–35 MPa (the majority is 6–18 MPa), respectively. Low stress difference values are mainly concentrated in the southeastern and northern parts. The overall prediction accuracy is high, with an error rate of less than 8% for the Layer S1l1-1−1 and less than 10% for the Wufeng Formation; (3) Based on rock acoustic emission experiments and finite element model simulation results, the study area is mainly under strike-slip stress faulting mechanism; (4) Due to the influence of the strike-slip faulting stress mechanism, when deploying horizontal wells in the area, priority should be given to selecting areas with low stress mechanism factor (Aφ) and low stress differences, to achieve better fracturing and transformation effects and reduce the risk of casing deformation and wellbore instability.

Rare Earth Element Characteristics of Shales from Wufeng-Longmaxi Formations in Deep-Buried Areas of the Northern Sichuan Basin, Southern China: Implications for Provenance, Depositional Conditions, and Paleoclimate.

To explore the sedimentary environment and the background of the source area of organic-rich shales in the Wufeng-Longmaxi Formations in the northern Sichuan Basin, samples from Well XX1 in the area were subjected to geochemical testing and analysis of organic carbon content, trace elements, and rare earth elements (REEs). The results show that the total content of REE (ΣREE) of the shale in the Wufeng-Longmaxi Formations varied from 183.08 to 234.66 μg/g with an average of 212.59 μg/g, which is significantly higher than the content of the North American shale composite. The fluctuations in the total amount of REEs in the shale of the Wufeng-Longmaxi Formations reflect certain differences in the geochemical conditions of the Upper Ordovician-Lower Silurian shale. The ratios of LREE/HREE, LaN/YbN, LaN/SmN, and GdN/YbN and the distribution of normalized REE patterns indicate that the source supply or sedimentary structural background may have changed during the shale deposition period of the Wufeng Formation, while the shale deposition period of the Longmaxi Formation may be in a relatively stable source supply and sedimentary structural background. There is no significant correlation between δCe and ΣREE, and the obviously negative Eu abnormity and the weak Ce abnormity indicated that the diagenesis had a limited impact on REEs. Geochemical parameters such as values of ∑REE, δEu, δCe, Ceanom, and LaN/YbN indicate that the climate during the Wufeng-Longmaxi Formation shale deposition period was warm and humid, and the shale was deposited mainly in the suboxic-anoxic water environment. The deposition rate was stable and slow, providing good conditions for the production and preservation of organic matter. At the same time, this shows that the water environment of Wufeng Formation is more anoxic and reductive than that of Longmaxi Formation, which is more conducive to the preservation of organic matter. The correlation between ΣREE and the content of Sc, Ti, Cr, Co, Zr, Nb, Th, Hf, Ta, and other elements indicates that the sources of REEs in the shale of Wufeng and Longmaxi Formations in the study area are similar, mainly terrestrial clasts, and some may come from the sea. The REE distribution pattern shows that the shale provenance of the Wufeng-Longmaxi Formations mainly comes from the upper crust. The La/Yb-∑REE diagram shows that the sediment-parent rocks are mainly early sedimentary rocks and these sediment-parent rocks have granite provenance characteristics. Compared to La/Yb, LREE/HREE, LaN/YbN, and other REE characteristic parameters, it is inferred that the tectonic background of the study area is dominated by passive continental margin.

Carbon dioxide adsorption on shale: A comparative study of isotherm models across diverse samples and temperatures

In order to address one of the most serious environmental concerns of our day, reducing carbon footprints, the globe has turned its attention to carbon dioxide (CO2) storage as a potential solution. Because of its unique features, shale is one of the most intriguing options in this area. Adsorption is the method through which CO2 is stored in shale, particularly in its supercritical condition. Adsorption isotherm models can be used to deduce the behaviour and mechanisms of this adsorption. Langmuir, Freundlich, Dubinin-Astakhov (D-A), and Brunauer-Emmett-Teller (BET) models are among the many available for CO2 modelling on shale. We attempted to fit these models to experimental data gathered from literature sources in this study, concentrating on four separate shale samples from various places in China. Among these samples are LMX1 and LMX2 from the Silurian Longmaxi Formation, WF1 from the Ordovician Wufeng Formation in the Sichuan Basin, and YC from the Ordos Basin's Yanchang Formation. The total organic carbon (TOC) content of these shales, three marine and one continental, ranged from 3.19 to 4.27. The experimental data used to fit the model was obtained at three different temperatures: 35, 45, and 55°C. The Langmuir and D-A models offered the best fit for the data across all samples and temperature. R2 values 0.93429 (for YC rock at 35°C) to 0.99287 (for WF1 at 35°C) for Langmuir and 0.88879 to 0.99201 LMX1 at 35°C. The theoretical underpinnings of these models, which account for the physical properties and adsorption dynamics of supercritical CO2 on shale, are responsible for their performance. Finally, this study adds to our understanding of CO2 adsorption on shale, giving useful insights for future research and potential practical uses in CO2 storage. More research is needed, however, to completely understand the mechanisms and influencing factors of CO2 adsorption in various types of shale, as well as to develop the models used to forecast this behaviour.