Wood Products Research Articles

Timber and carbon sequestration potential of Chinese forests under different forest management scenarios

Developing forestry action plans with the goal of carbon neutrality is a critical task to identify carbon sink potential and balance the pathways of China's forests. Current research that predicts forest biomass carbon stock and sink potential has shortcomings, such as an incomplete assessment of China's forest carbon sink range, assumptions based on unchanged forest area in the base year and insufficient consideration of natural and human disturbance factors. This study utilised the national forest inventory (NFI) data to construct a model of forest growth and consumption using a machine learning algorithm (i.e. random forest), identified suitable areas for future forest expansion by integrating multi-source data, and set up three future forest management scenarios: business as usual (BAU), enhanced policy scenario (EPS) and maximum potential scenario (MPS). In addition, changes in the area, volume stock and biomass carbon stock in China's forests between 2020 and 2060 were predicted under three forestry activities (i.e. existing forest, afforested/reforested (AR) forest and forest conversion) and three climate scenarios (i.e. SSP126, SSP370 and SSP585) based on the 9th NFI (2014–2018). According to China's relevant planning goals and suitable forest space, the area of AR forests is predicted to be 55.55 × 106 hm2 by 2060, and the forest coverage rate is predicted to increase from 23% in 2018 to 28% by 2060. Biomass carbon sequestration (BCS) between 2020 and 2060 in AR forests is predicted to be 36.00 TgC per year. By 2060, the average BCS is predicted to be approximately 140.00–287.56 TgC per year in China's forests, which is mainly owing to arbor forest management. Under the BAU and EPS scenarios, BCS in China's forests is expected to decline from 2020 to 2060. However, under the MPS, BCS in China's forests is projected to increase and be maintained at 322 TgC per year or above by 2060, with wood production reaching 4.71 × 108 m3 per year. China's forests are predicted to experience an increase in biomass carbon stock in the future and play a role as a carbon sink. By taking measures to achieve the maximum growth potential of all forest types, China's forests will achieve a win‒win situation between carbon sinks and timber production.

Net primary productivity of Betula platyphylla woodland and the response of current-year shoots to vegetation degradation in Mongolian forest steppe

At the southern margin of forest steppe vegetation in Mongolia, Betula platyphylla woodlands occur on north-facing slopes and hill tops, where congeneric shrub Betula fusca often coexists. Woodland degradation results in B. fusca scrub with scattered B. platyphylla trees. We studied structure and productivity of a B. platyphylla woodland and the current-year shoot allometry in the Hustai National Park of central Mongolia. For the B. platyphylla woodland examined, stand basal area and estimated aboveground biomass for stems ≥ 3 cm diameter were 3.9 m2 ha–1 and 13.3 Mg dry mass ha–1, respectively. Leaf area index was 0.93 indicating open canopy layer. Aboveground net primary productivity as the sum of coarse wood production and current-year shoot mass amounted to 1.89 Mg dry mass ha–1 year–1, which was high relative to small aboveground biomass. Analysis of current-year shoot allometry demonstrated that B. platyphylla had more xeromorphic shoots in the scrub, with smaller specific leaf area, lower mass ratio of leaf laminae to supporting parts, and smaller lamina mass against sum of petiole basal area, than in the woodland. Our results indicate that current-year shoot allometry characterizes tree response to woodland degradation at the dry margin of forest steppe.

Development of Prospective Economic Specializations as a Condition for Regional Economic Growth

Introduction. In the new economic conditions caused by the sanctions pressure, the Russian economy needs new sources of growth. Economic specializations in Russian regions, which are understood as prospective sectoral priorities and types of economic activity, can act as a source of revitalizing economic dynamics revival. Geopolitical turbulence and the associated focus on the development of the domestic market have led to additional attention from researchers and experts to the study of the economic specializations of Russian subjects. The objective of this study is to substantiate the development of economic specializations in the regional economy, acting as a condition for its growth. Materials and Methods. Using the materials of the Vologda Region, the export-oriented region of the Northwest, the list of economic specialization, the development of which is promising from the point of view of long-term economic growth, was formulated. The main sources of information are Rosstat data and input-output tables for the Vologda Region. The economic specializations for the region are primarily based on studies that focus on identifying and developing economic specialization in Russian regions. The use of input-output modeling methodology has allowed to determine the impact on the regional economy of extending the value chain in the timber industry due to increased domestic demand for wood products. Results. Based on the analysis of the dynamics of industrial production in the Vologda Region, it was revealed that the Vologda Region is among the regions that have felt the impact of the sanctions. Вased on the approaches of the authors engaged in the search for promising economic specializations of the region, it is established that the timber industry and tourism can act as such. The results of the input-output modeling are shown that stimulating consumer demand for woodworking products has a significant impact on the growth of a region’s economy. This demand is driven by the needs of the tourism sector. The calculations were performed in determining the significance of promoting projects for the development of hotels utilizing CLT panel-based technologies in the region. Discussion and Conclusion. In the study, it was determined that stimulating demand for the production of deep processing of wood (houses from CLT panels) would have a significant impact on the growth of the regional economy, ensuring an increase in the production of goods and services, the wage fund and the number of employed. It was also shown that the development of proposed economic specializations in the Vologda Region is promising and allows for the concentration of added value within the region, which is particularly important for the development of the domestic market. For the regional authorities, the interest lies in the possibility of obtaining a quantitative assessment of the development of economic specializations on their territory, which can be used by them in the improvement of economic policy.

Preparation of high-performance antibacterial/antifungal citric acid–starch adhesives based on physical entanglement and chemical crosslinking

Starch-based wood adhesives are widely used as environmentally friendly and formaldehyde-free alternatives in the manufacturing of wood products. However, their poor water resistance and inability to inhibit bacterial/fungal growth limit their practicality. To address this issue, a physicochemical double-crosslinked network structure between citric acid, starch, and wood was prepared in this study by physically entangling the wood structure and chemically crosslinking the starch molecules, with citric acid preventing the activity of various enzymes and denatured proteins within microbial cells, thereby inhibiting bacterial and fungal growth. In water resistance cycling tests, the resulting esterified starch plywood demonstrated a 47.6 % and 13.2 % increase in water resistance compared with starch plywood and commercially available phenolic resin plywood, respectively. In addition, the tighter intermolecular bonding in the crosslinked structure results in a 31 % increase in heat resistance. The physical “nailing” and chemical crosslinking between the adhesive and the wood improved considerably the bonding strength to 98.36 %. The dual role of the physicochemical crosslinking of starch adhesives provides a straightforward strategy for the preparation of inexpensive, water-resistant, and fungal/bacterial-resistant starch adhesives, thus contributing to the promotion of starch adhesives.

The role of the pulp and paper industry in achieving net zero U.S. CO2 emissions in 2050

The pulp and paper industry is energy-intensive, making up about 9 % of total United States industrial energy consumption and 2.5 % of U.S. industrial greenhouse gas emissions. The pulp and paper industry is unique among industrial sectors due to its existing reliance on waste biomass to generate energy for mill operations. Pulp and paper mills could theoretically offer opportunities for negative emissions through carbon capture and storage (CCS) technologies along with use of biomass. In addition, the paper sector's use of low-temperature industrial heat creates opportunities for CO2 reductions through electrification technologies.We employ the Global Change Analysis Model (GCAM) to evaluate decarbonization pathways for the pulp and paper sector in the United States, as well as the sector's role in a net zero scenario and impacts on the energy, land, and water sectors. The version of GCAM used in this study includes detailed representation of major industrial sectors, including the pulp and paper industry. Representation of the linkage between forest products and paper production allow us to account for upstream carbon emissions, sequestration, and land-use impacts.Preliminary results under a pathway to net zero U.S. CO2 emissions in 2050 show that the pulp and paper industry can reach net zero CO2 emissions before 2050, earlier than the overall energy system, and contribute negative emissions thereafter. Use of fossil fuels is significantly reduced by 2050, shifting to increased electricity use in process heat generation. Consumption of biomass energy in process heat also increases compared to the reference scenario. Though paper production decreases in the policy scenario in response to higher prices of wood products, a high carbon price can incentivize increased use of biomass with CCS and thus paper production. Negative emissions opportunities in the paper industry have impacts on the land sector. Increasing use of biomass accelerates the shift from unmanaged to managed forests, with associated tradeoffs between technological carbon sequestration and natural ecosystem services.

Fragility functions for low‐damage post‐tensioned timber frames

AbstractThe growing concern over environmental impact and the significant improvement in the quality of engineered wood products have led to the rapid growth of the timber building industry in the last decades. Although traditional, yet recent, mass timber structural systems, such as cross‐laminated timber walls, can provide satisfactory seismic performance during earthquakes in terms of life‐safety, the crucial need for more resilient timber buildings has prompted the development of low‐damage high‐performance self‐centring and dissipative solutions based on unbonded post‐tensioned hybrid connections, referred to as Pres‐Lam technology. The flexibility of design and construction speed, combined with the enhanced seismic performance, create a unique potential towards an earthquake‐proof sustainable building system. Despite the growing popularity of the technology, a comprehensive framework for the fragility analysis, to be used in risk and loss modelling applications, has not yet been developed for both component and building levels.This article aims to develop a framework for assessing the fragility curves of moment‐resisting Pres‐Lam frame systems, at both structural system and connection levels, by using and comparing different approaches that involve nonlinear static (pushover) and time history dynamic analyses. A Python‐based parametric workflow was developed to evaluate fragility curves for a wide range of case‐study buildings. Particularly, three distinct structures were selected, and their fragility curves were evaluated utilizing alternative methodologies at a building structural‐system level. Finally, fragility models were fitted for individual structural connections using the results of time‐history analyses. These models are intended for use in a component‐based loss assessment.

Influence of cryogenic CO2 on wood-plastic composite (WPC) turning-performance characteristics: a comparison with dry machining

ABSTRACT Wood plastic composite (WPC) is an environmentally friendly wood material widely used to manufacture wood products for indoor and outdoor use. In traditional WPC cutting, a built-up edge is easily generated in the cutting zone, which negatively affects the machined surface quality. Cryogenic cutting technology can effectively suppress the formation of built-up edges in the cutting zone and improve machining quality. Therefore, this study aims to investigate the cryogenic cutting properties of WPC. Cryogenic turning tests and dry turning tests were carried out on WPC, and cutting temperature, cutting force, and surface roughness were compared and analyzed. The results showed that cryogenic CO 2 airflow improved heat dissipation in the cutting zone and effectively reduced the temperature. Under the effect of cryogenic CO 2 , the strength of WPC increased, resulting in a higher cutting force for cryogenic turning than that for dry turning. Cryogenic cutting of WPC resulted in a smoother surface than dry cutting. During the WPC cryogenic turning process, increasing cutting depth and feed rate causes an increase in cutting temperature, cutting force and surface roughness. Increasing cutting speed also cause an increase in cutting temperature, but the reduction in cutting forces and surface roughness is beneficial. In summary, cryogenic cutting of WPC can achieve better surface quality than dry machining, and these results can contribute to practical guidelines for industrial applications.

Numerical investigation on flexural performance of dowel laminated timber with laminas made of laminated veneer lumber

Horizontal dowel laminated timber (H-DLT) is a doweled engineered wood product with laminas made of solid timber. H-DLT has excellent bending resistance. However, the height of cross-section of H-DLT as a beam is limited by the width of solid wood laminas. Laminated veneer lumber (LVL) is an engineered wood product formed by hot-pressed gluing thin veneers, which is flexible in cross-section size compared to solid timber. Horizontal dowel laminated veneer lumber (H-DLVL) was developed by utilizing the H-DLT production methods and LVL material characteristics. H-DLVL has flexible size and good mechanical properties, and it can be made into beams and panels with large cross-sections. In this paper, the flexural performance of H-DLVL beams was investigated. A predictive finite element model of H-DLVL beams was created by the extended finite element method (XFEM) with cohesive zone model (CZM). The numerical models using solid-beam elements without fictitious cracks were verified and calibrated by experimental results. The influence of five variables, including lamina width, thickness, and quantity, dowel spacing along the grain, and dowel row (edge distance), on the flexural performance of H-DLVL beams was analyzed, and the flexural strength of H-DLVL beams was parameterized. The results showed that the failure mode of H-DLVL beams could be well predicted by XFEM without considering fictitious cracks combined with CZM, and the error range of simulated flexural strength of H-DLVL beams was within ±10 %. The flexural strength of H-DLVL beams was directly affected by lamina thickness and dowel spacing along the grain. The flexural strength of H-DLVL beams increased with the increase of those two variables. Lamina width and dowel row (edge distance) affected the flexural strength of H-DLVL beams indirectly by influencing the failure mode of H-DLVL beams. Based on this research, the recommended dowel spacing along the grain of H-DLVL beams was 6.25–12.5 times the wood dowel diameter, and the recommended edge distance of H-DLVL beams was 5–7 times.

Development of national post-fire restoration system to assess net GHG impacts and salvage biomass availability

In light of the recent unprecedented wildfires in Canada and the potential for increasing burned areas in the future, there is a need to explore post-fire salvage harvest and restoration and the implications for greenhouse gas (GHG) emissions. Salvage logging and replanting initiatives offer a potential solution by regrowing forests more quickly while meeting societal demands for wood and bioenergy.This study presents a comprehensive modeling framework to estimate post-fire salvage biomass and net GHG emissions relative to a ‘do-nothing’ baseline for all of Canada's harvest-eligible forests. Forest ecosystem carbon emissions and removals were modeled at 1-ha spatial resolution for Canadian forests using the Generic Carbon Budget Model (GCBM) from 1990 to 2070 using several forest inventory data sources with future harvest and wildfires.Building upon previous research, our work integrated the Canadian Forest Fire Danger Rating System fire intensity to estimate fire severity of future wildfires. For 2024 to 2070, we assessed the changes in ecosystem carbon, emissions from harvested wood products, and substitution benefits from avoided emissions-intensive materials, relative to a forward-looking baseline. Our prototype system provides a comprehensive framework, configuration files, links to datasets to quantify the net GHG of post-fire restoration, and sample results for validation.•Developed spatially explicit forest carbon modeling system for all of Canada's forests.•Assessed the net GHG reduction from post-fire restoration.•Used system approach to consider forests, wood products and substitution benefits.

Carbon sink of forest ecosystems: Concept, time effect and improvement approaches.

The widespread utilization of fossil fuels has emitted large amounts of CO2 into the atmosphere since the Industrial Revolution, leading to climate warming and frequent occurrence of extreme climate events. To effectively alleviate climate change, the international community has made various efforts to reduce carbon emissions and eliminate CO2 from the atmosphere. In 2020, the Chinese government announced that carbon emission peaking and carbon neutrality will be achieved by 2030 and 2060, respectively. According to the current forecast, by the time carbon neutrality is achieved in 2060, even under the minimum conditions of fossil energy use, production, and living emissions, China will still have to emit about 1/4 of the current total emissions. These carbon must primarily be absorbed by ecosystems. Furthermore, approximately 140 ppm increase in CO2 in the atmosphere since the Industrial Revolution still needs to be removed by ecosystems. Forests are the main component of terrestrial ecosystems, contributing more than 80% of the carbon sequestration capacity of all terrestrial ecosystems. However, due to the long periodicity, complexity and dynamic variability of forests, the basic concepts of ecosystem carbon sink and its time effect are still unclear, leading to problems, such as lacking technologies for improving carbon sink capacity and disorganized rules in the carbon sink trading market. In this review, we introduced carbon sink concept according to the processes of absorbing and fixing CO2 by plant photosynthesis in forest ecosystems. Then, we analyzed the processes of time-scale-dependent carbon sinks of forest ecosystems, discussed the time effects of forest carbon sinks, and suggested using "t-year" as the unit of carbon sink (taking 3-6 months as the minimum measurement time, i.e., the beginning of carbon sequestration). Third, we proposed the approaches to improve the carbon sink capacity of forest ecosystems. One way is to improve the carbon sink capacity (expanding forest area, improving forest quality, and increasing forest soil carbon storage) of forest ecosystems. Another approach is to maintain the carbon sink of forest ecosystems as long as possible, i.e., to reduce temporary carbon sink (definition: carbon in the forest ecosystems emit into the atmosphere for a certain period) and to increase persistent carbon sink (definition: carbon in the forest ecosystems no longer emit into the atmosphere for a certain period; according to the relevant provisions of the Paris Agreement, the upper time limit for carbon sink measurement can be considered to be the year 2100. In order to maintain the persistent carbon sink, strateges such as efficient use of wood products (replace steel, cement, plastic with wood), control of forest fires or other disturbances-induced emissions, and turning forest biomass into biochar should be taken. Finally, we proposed to develop climate-smart forestry driven by artificial intelligence (AI), which would provide new theoretical and technical support for improving the carbon sink of forest ecosystems and facilitating sustainable forest management.

Economic Evaluation of Conservation through Use of an Araucaria angustifolia Provenance and Progeny Test.

Araucaria angustifolia is a species known for its valuable wood and nuts, but it is threatened with extinction. The plantation of forests for genetic resource conservation is a complementary strategy designed to reduce the species' genetic variability loss. This study aimed to evaluate the technical and economic viability of A. angustifolia for genetic conservation through use. The analyzed provenance and progeny trial was established in 1982 in Itapeva, Brazil. It was structured using a compact family blocks design with 110 open-pollinated progenies from five natural populations, three replicates, ten plants per subplot, and 3.0 m × 2.0 m spacing. After 33 years, the trial was evaluated for total height, diameter at breast height, wood volume, and survival. The variance components and genetic parameter estimates were performed using Restricted Maximum Likelihood/Best Linear Unbiased Prediction methods (REML/BLUP) methods with the Selegen software (version 2014). The production and management scenarios were obtained using the SisAraucaria software (version 2003). Sensitivity analysis and economic parameter estimates were obtained through various economic evaluation methods using the Planin software (version 1995). In general, the genetic parameters indicated that the population has enough variability for both conservation and breeding purposes, suggesting technical viability for the establishment of a seed orchard. The economic parameters indicated that the commercialization of wood and araucaria nuts proved to be more profitable than wood production by itself. In conclusion, araucaria genetic conservation through use is a technically and economically viable ex situ conservation strategy.

Deformation level and specimen geometry in compression perpendicular to the grain of solid timber, GLT and CLT timber products

Compression Perpendicular to Grain (CPG) is a crucial aspect of timber design, particularly with the advent of engineering wood products like Cross Laminated Timber (CLT), often used in point-supported structures. After many years of discussion, the mechanics-based model by Van der Put has finally been included in the new Eurocode draft. This model offers a more systematic approach to design with a solid theoretical foundation for stress dispersion. However, there is still a need for improvement, especially in two areas: accounting for the capacity increment associated with increasing levels of deformation and determining the maximum effective height to be assumed in calculating the load spreading in deep timber elements. In this paper, the authors focus on these two areas of improvement for GLT, solid timber and CLT timber products. They analyse the data of two extensive experimental campaigns conducted at Norsk Treteknisk Institutt (Norwegian Institute of Wood Technology) and at the Norwegian University of Science and Technology (NTNU) on Glued Laminated Timber (GLT), Solid Timber (ST) and CLT. Additionally, they validated a parametric finite element (FE) model in Abaqus to assess the effect of the height of the timber element on stress distribution. A parametric approach developed in Abaqus aims to find the optimal height threshold to be assumed in the new code formulation.

Understanding substitution impacts of harvested wood and processing residues to mitigate climate change: A case of Chattogram, Bangladesh

In Bangladesh, the role of harvested wood (e.g. wood products and associated processing residues) to mitigate climate change is less known and often ignored. This study aims to understand the substitution impacts of harvested wood products and associated processing residues in Chattogram city area, Bangladesh. Additionally, we also explored sellers' and users' perceptions towards the use of wood biomass and associated effects, with users’ level of satisfaction with using different categories of products of wood, bamboo, steel, and plastic. The study only considered sawn wood from sawmills to the wooden furniture and building materials, and associated residues, but excluded carbon in the forest ecosystem. A survey, using three different types of pre-tested questionnaires consisting of open and close-ended questions, was carried out in 36 sawmills, 62 timber merchants, and 55 furniture manufacturers or shops, with their owners or managers in Chattogram City Corporation area, Bangladesh. We used the general displacement factors of 0.5, 0.45, 1, and 1.3 tC tC−1 for processing residues, composite wood furniture, solid wood furniture, and building materials, respectively. The amount of wood products and associated residues and their avoided emissions due to substitution were presented in m3 industry−1 year−1 and Mg industry−1 year−1. Results revealed that the highest mean annual consumptions of timber (783.95 m3 industry−1 year−1) and processing residues (196.05 m3 industry−1 year−1) were in the sawmills and the lowest (60.56 and 0.66 m3 industry−1 year−1) in the furniture manufacturers. Altogether, the processing of round logs generated 36% residues of its mass from sawmilling to furniture manufacture. Sawn wood (of sawmills and timber merchants) consumed in the building houses produced the highest annual avoided emissions (1029.51 Mg CO2 industry−1 year−1). The development of efficient products with long lifespans, in addition to factors such as forest management, emissions, waste generation, and life cycle assessments of products likely play a significant role in determining the overall impact on displacement factors. The future study should focus on developing material flow analysis integrated with a life cycle assessment approach for various products for the construction and associated sectors, thus generating a country-specific displacement factor. The perception-based study documented that wood furniture and processing residues as bioenergy were perceived as a good substitute for non-wood furniture (e.g., steel, plastic) and fossil fuels (gas, oil) and thus lowering fossil emissions as wood products were perceived as user-and-environment-friendly and attractive. However, environmental awareness of both consumers and sellers about wood and bioenergy use and forest degradation is crucial for turning them into positive from neutral perceptions.

Particleboard from the residues of wooden door production as a closed material cycle

The research was aimed at verifying that waste material from the production of wooden doors can be used to produce type P2 particleboard by EN 312 standards and that the interior door leaves made from it will meet the required tests. For this purpose, particleboards consisting of wood-based panel waste material were produced using MUF resins. The mechanical, physical and hygienic properties of the particleboard produced were investigated. Based on the results, it was confirmed that the boards made from both 100 % and 50 % waste met all the requirements for type-P2 particleboards. Prototype door leaves were then manufactured using boards made from 50 % waste and tested for functional properties. The door leaves for static torsional strength and resistance to vertical loads, soft and heavy impacts and strong body impacts meet the requirements for Class 1 by EN 1192, and resistance to repeated opening and closing cycles meets the requirements for Class 3 by EN 12400. The results indicate that producing the particleboards from waste from the same production line of interior door leaves does not impair the properties of the doors and the particle boards can be used to produce them. This product fits in with the idea of a circular economy and the idea itself contributes to the sustainability of production processes by managing part of the waste generated.

Production and technical performance of scrimber composite manufactured from industrial low-value wood for structural applications

Development of scrimber composites and other engineered wood products from low-value wood and wood waste provides an effective opportunity to preserve natural resources, minimize waste, and innovate the production of higher-performance, environment-friendly construction materials. In this study, peeler cores, which are the center of poplar logs remaining after the peeling process in the veneer production, were utilized to develop scrimber composites. This study investigated the effects of different resins, including phenol-formaldehyde (PF) and urea formaldehyde (UF), as well as hydrothermal treatments at various temperatures (60 °C and 130 °C), on the physical and mechanical properties of the scrimber composites. Chemical changes in wood components and morphological changes in wood cell walls resulting from hydrothermal treatment were analyzed using Fourier transform infrared spectroscopy and scanning electron microscopy. To clarify how resin type and hydrothermal treatment affect structural performance, several physical and mechanical properties of scrimber composites, including thickness swelling, water absorption, internal bond strength, bending modulus of elasticity, and modulus of rupture, were measured. The test results revealed that hydrothermally treated wood scrims at 130 °C, when bonded with PF resin, produced scrimber composites with superior structural performance.

Impact assessment of COVID-19 and PMO15 on labour in the plantation-wood processing sector in Lao PDR with policy recommendations

The primary objective of this research was to 1) explore the impacts of COVID-19 on availability of, and demand for, labor in the plantation-wood processing sector in Lao PDR; 2) the Government and industry response measures to COVID-19; and 3) the impacts of 2016 Prime Ministers’ Order (No. 15/PM, PMO15) aimed at addressing illegal logging and controlling log exports were also considered, as representative of a similar ‘shock’ to the sector. The research, undertaken in Vientiane Capital City, adopted a mainly qualitative methodology utilizing literature reviews and semi-structured interviews to gather data from the government, industry and workers. Micro, small and medium sized companies and their employees were surveyed. The research found that Lao wood manufacturers were affected by the shutdowns in response to COVID-19 and there were follow-on effects up and down value chains. The experiences of Laos were found to be similar to those experienced in wood producing countries globally. Supply issues and access to markets were key factors impacting the ability of factories to continue to operate and retain workers. Government protection measures were effective but challenging to implement, and access to support was difficult. Impacts on male and female differed. Awareness of, and access to, mandatory social security insurance by workers was very low. Other forms of social ‘safety-net’ were more apparent and important, including company-based programs, charity, and family/self-help. Improved dissemination of information about the need for, and benefits of, social security should occur to mitigate future shocks. The high dependence on foreign workers to fill skilled jobs in the sector remains an issue. Coupled with reforms in response to PMO15, to improve factory and product standards and ongoing export restrictions, there is a need further build Lao skills and capacity. Current efforts to up-skill Lao workers for employment in emerging wood product industries must be maintained, and improved recognition of Lao-acquired competencies is needed. Market needs analysis including the development of product dossiers is required together with the building of relevant technical expertise. Without this the Lao wood processing sector will be remain vulnerable to future shocks.

Proposed correction to the Gamma method for estimating the bending stiffness of CLT panels

Engineered wood products, such as Cross Laminated Timber (CLT), have been widely used in civil construction. Standard calculation methods, like the Gamma method commonly used in structural design, estimate the bending stiffness of elements. However, these methods are based on one-dimensional solids (bar elements), which can be limiting. This limitation may result in inaccurate estimates, especially when the panel's dimensions, measured in the median plane, significantly differ by an order of magnitude. In this research, a parametric study was carried out using the finite element method (three-dimensional approach), varying the panel's dimensions (width and length), the layers' thickness, and the number of layers (cross-section height), and adopting elastic properties considering either the wood's orthotropy or the rolling shear estimation (108 numerical simulations in all). Based on the parameterization, multiple variable regression models were used to establish a correction coefficient to be incorporated into the Gamma method to improve its accuracy in estimating bending stiffness. Therefore, the single adjusted equation (considering the wood's orthotropy) showed values closer to the numerical ones (MAPE = 0.95 %, RMSE = 2.96 × 1011 N⋅mm2, and CV = 1.60 %) than those obtained by the Gamma method (MAPE = 2.13 %, RMSE = 7.47 × 1011 N⋅mm2, and CV = 4.04 %).

Factors Affecting the Decision to Purchase Teak Products for Consumption by Consumers in Luangprabang District, Luang Prabang province

This research aims to investigate the situation of consumers purchasing teak products and decision to buy teak product in LuangPrabang. Using a questionnaire to gather data from a sample group of 380 individuals who have purchased teak products. And using the SPSS program to analyze the percentage of these consumers. The results of the study found that the situation when buying teak wood products is: ceiling edge 98.68%, ceiling wood 92.10%, kitchen cabinet 69.21%, chair 55.26%, table 54.73%, stairs 53.94%,bed 52.89%, plane wood 52.63%, door edge 47.36%, window frame 28.68%, door frame 26.31%, pillar wood 9.21%, air intake 6.57%, and finally sofa 4.73%. Expenses for more than 5 million kip cover 68.80%, 3 to 5 million cover 78.00%, 1 to 3 million cover 70.00%, and lower than 1 million kip cover 54.80%. 95% of buyers choose to buy in front of the store, 59% call to order for the store to pick up and deliver, and 49% order online. The study also found that 95% of the reasons are because rose wood or led wood is hard to find and the price is expensive; 65% of Luang Prabang is still plentiful of teak; there is a lot of teak wood; and teak wood is beautiful and lighter than other wood; and 35% because there is no choice.Result also found that the factors that making consumers decide to buy teak products are quality, appearance, easy to find and purchase, price and detail of the product with a statistical significance level of less than .05.

Fertilization-induced greenhouse gas emissions partially offset carbon sequestration during afforestation

Newly-planted forests require careful management to ensure the successful establishment of young trees; this can include herbicide application, irrigation, fertilization, or a combination of these treatments. The global rise in nitrogen (N) fertilizer application in managed forest plantations is driven by policies aiming at rapid tree growth and carbon sequestration as a strategy to tackle climate change. However, the impact of N-fertilizer on production and consumption of greenhouse gases (GHG), such as carbon dioxide (CO2), nitrous oxide (N2O), and methane (CH4) is poorly understood, particularly when combined with irrigation. As a result, assessing forest GHG balance is key to defining effective climate mitigation strategies through afforestation projects.This study assessed the response of GHG fluxes to irrigation and fertilization on recently afforested lowland arable land in central England, across loamy and sandy loam soils. The application of 180 kg ha−1 of N via an irrigation system, aimed at enhancing wood production and C sequestration, resulted in an increase of CO2 and N2O emissions for both soil types. Particularly, the N2O emission factors (EF; kg N2O/kg N applied) for loamy and sandy loamy soils were 3.9% and 2.1%, respectively, higher than the IPCC default estimate of 1% for agricultural and forest land. Furthermore, both sandy loam and loamy soils showed a distinct transition from being CH4 sinks to sources. Thus, the combined application of irrigation and N-fertilizer had a significant impact on the total Global Warming Potential (GWP), which increased by 34% and 32% for sandy loam and loamy soil, respectively, when compared to their controls. Despite a significant increase in tree growth under fertilized conditions, the offset potential was only partial, highlighting the net contribution to GHG emissions. The outcomes of this study emphasise the potential for significant “carbon-equivalent-debt” from afforestation supported in its early years by irrigation and fertilization.

Unveiling the Potential of Brazilian Eucalyptus for Transparent Wood Manufacturing via the Kraft Pulping Process as a Future Building Material

The emergence of transparent wood as a viable alternative to traditional glass has sparked considerable interest in recent research endeavors. Despite advancements, challenges persist in the delignification methods and wood species utilized in prior studies. Therefore, this study delves into the potential of Brazilian eucalyptus wood for transparent wood production through the kraft pulping process. Delignification was carried out in a laboratory setting, replicating the kraft process with varying reaction times (15, 30, 45, and 60 min). The resulting delignified wood veneers were impregnated with a pre-polymerized PMMA solution. The study encompassed various analyses, including UV-Vis spectroscopy, colorimetry, SEM, optical microscopy, and mechanical property evaluations. The results revealed intriguing trends in terms of transparency, color changes, microstructural modifications, and mechanical properties as a function of delignification time. This work presents valuable insights into the transformative potential of eucalyptus wood, offering a deeper understanding of the interplay between wood modification and PMMA impregnation.