Wireless Communication Technology Research Articles

Joint Optimization-Based QoS and PAPR Reduction Technique for Energy-Efficient Massive MIMO System

Massive multiple input multiple output (MIMO) is an innovative wireless communication technology that significantly enhances the capacity and efficiency of data transmission in modern networks. Massive multiple input multiple output, despite benefits, faces difficulties in managing numerous antennas affecting signal quality, peak-to-average power ratio (PAPR), and energy efficiency due to its scale and complexity. However, overcoming these complexities is vital for unlocking massive multiple input multiple output’s potential in high-quality, energy-efficient wireless communication. A proposed joint optimization-based technique aims to address these issues in massive MIMO systems. In phase 1, joint optimization with quality of service maximizes capacity via power distribution, employing the hybrid spider wasp Fick’s law algorithm. In phase 2, zero-forcing with symbol-level linear precoding, especially the stacked convolutional sparse bidirectional long short-term memory autoencoder (SCS–BiLSTMAE) network, efficiently reduces peak-to-average power ratio, collaborating for reduced bit rate error and peak-to-average power ratio through adaptive mapping. Refining the model involves precise hyperparameter tuning using the enhanced influencer buddy optimization algorithm. The proposed framework not only demonstrates exceptional performance, but the metrics also underscore the model's effectiveness in addressing diverse challenges, establishing it as a robust solution for quality enhancement, peak-to-average power ratio reduction, and energy efficiency. Additionally, the proposed model attains 28.14% greater system capacity than existing methods.

Multifunctional microwave absorption materials: construction strategies and functional applications.

The widespread adoption of wireless communication technology, especially with the introduction of artificial intelligence and the Internet of Things, has greatly improved our quality of life. However, this progress has led to increased electromagnetic (EM) interference and pollution issues. The development of advanced microwave absorbing materials (MAMs) is one of the most feasible solutions to solve these problems, and has therefore received widespread attention. However, MAMs still face many limitations in practical applications and are not yet widely used. This paper presents a comprehensive review of the current status and future prospects of MAMs, and identifies the various challenges from practical application scenarios. Furthermore, strategies and principles for the construction of multifunctional MAMs are discussed in order to address the possible problems that are faced. This article also presents the potential applications of MAMs in other fields including environmental science, energy conversion, and medicine. Finally, an analysis of the potential outcomes and future challenges of multifunctional MAMs are presented.

Application of Medical Implants for Public Health Monitoring and Treatment

The World Health Organisation (WHO) reports that diabetes affects roughly 180 million people worldwide and that cardiovascular illnesses account for nearly 30% of all fatalities worldwide. Applications involving radio frequency (RF) or microwave technology are crucial to medical diagnosis and illness prevention. The most recent developments in the field of implantable medical devices (IMDs), such as biomedical telemetry, allow biosignals to be monitored remotely via wireless communication technology. Providing correct information to the external monitoring station is the primary function of the health maintenance monitoring scheme. Because wireless communication lessens the invasiveness of electromagnetic (EM) medical equipment, it is extremely helpful in improving patient comfort during treatment. The first swallowable pills with sensing capabilities and the introduction of pacemakers in the early 1960s both demonstrated the significance of implantable medical devices (IMDs), which enable disease monitoring and therapy. Using IMDs with wireless connection has allowed for the monitoring of both system performance and patient status. IMDs have been widely employed in healthcare systems to gather real-time signals from biosensors or preprocessed physiological bio-signals for early disease identification, improving treatment quality and promoting healthy living.

Survey on Optical Wireless Communication with Intelligent Reflecting Surfaces

Optical Wireless Communication (OWC) technology has gained significant attention in recent years due to its potential for providing high-data-rate wireless connections through the large license-free bandwidth available. A key challenge in OWC systems, similar to high-frequency Radiofrequency (RF) systems, is the presence of dead zones caused by obstacles like buildings, trees, and moving individuals, which can degrade signal quality or disrupt data transmission. Traditionally, relays have been used to mitigate these issues. Intelligent Reflecting Surfaces (IRSs) have recently emerged as a promising solution, enhancing system performance and flexibility by providing reconfigurable communication channels. This paper presents an overview of the application of IRSs in OWC systems. Specifically, we categorize IRSs into two main types: mirror array-based IRSs and metasurface-based IRSs. Furthermore, we delve into modeling approaches of mirror array-based IRSs in OWC and analyze recent advances in IRS control, which are classified into system power or gain optimization-oriented, system link reliability optimization-oriented, system data rate optimization-oriented, system security optimization-oriented, and system energy optimization-oriented approaches. Moreover, we present the principles of metasurface-based IRSs from a physical mechanism perspective, highlighting their application in OWC systems through the distinct roles of light signal refraction and reflection. Finally, we discuss the key challenges and potential future directions for integrating IRS with OWC systems, providing insights for further research in this promising field.

Developing a BIM based digital twin system for structural health monitoring of civil infrastructure

Abstract The utilization of building information modeling (BIM) within digital technology facilitates the creation of three-dimensional representations for monitoring data in large-scale civil infrastructure. In response to the need for intelligent structural management, this study establishes a structural health monitoring (SHM) system and foundational framework based on digital twins. This framework integrates information from various sources and facilitates collaborative efforts for structural operation and maintenance. Additionally, the SHM system integrates actual monitoring measurements and early warning mechanisms to consolidate multi-source monitoring data with BIM. Through real-time analysis, the system provides insights into the operational status of bridges, capturing geometric, physical, and performance evolution characteristics. To construct the system, engineering challenges are initially digitized, with appropriate sensors deployed on real bridge structures to monitor dynamic (acceleration) and static (strain, displacement) physical information during bridge operation. Subsequently, through wireless communication and data storage technologies, the monitored physical data serves as input for mode identification and early warning algorithms, facilitating the acquisition of structural performance information. Finally, three-dimensional display technology enables real-time calculation and rendering of BIM models, fostering the exchange and interaction of monitoring and BIM information, thus enhancing the intelligence of SHM system.

Study on Power Equipment Control Using Low-Latency, High-Reliability Wireless Communication Technology

Study on Power Equipment Control Using Low-Latency, High-Reliability Wireless Communication Technology

Enhancing greenhouse strawberry irrigation: integrating IoT technologies and low-cost moisture sensors in substrate

The integration of Internet of Things (IoT) technologies, particularly sensor-based systems, is revolutionizing agriculture, including strawberry cultivation in greenhouses. Furthermore, the use of wireless communication technologies, alongside efficient data storage and visualization platforms, can enhance monitoring and decision-making capabilities. This study aimed to calibrate and verify the real-time operation of the low-cost SKU SEN0193 V2.0 sensor and the SHT20 in strawberry cultivation substrate, evaluating IoT technologies for data transmission, including LoRa, InfluxDB for storage, and Grafana for visualization and monitoring. The adaptability and accuracy of the SHT20 and SKU SEN0193 V2.0 sensors were tested in laboratory and greenhouse strawberry crops. Water retention curves in the substrate were determined using the Haines Funnel, while recording sensor measurements simultaneously for calibration. For real-time monitoring, sensors were placed in two slabs with strawberry plants in a greenhouse. InfluxDB stored the data, and Grafana visualized it. While the SHT20 sensor showed limited suitability for substrates due to its lack of response to moisture variations, SKU SEN0193 V2.0 produced excellent results, detecting changes in moisture content in both laboratory and greenhouse tests. Sensor-specific calibration for greenhouse slabs is crucial. The utilization of data storage and visualization tools like InfluxDB and Grafana facilitated real-time data manipulation, demonstrating their potential for enhancing irrigation management in greenhouse strawberry production.

Research on extremely low frequency electromagnetic wave model and simulation in wellbore communication

Over recent years, as digitalization and intelligence in oil wellbore have increased, so have the stricter requirements for wireless communication technology in terms of distance, accuracy, and portability. As a result, it’s necessary to rely on more advanced and efficient wireless communication technologies to meet the industry’s needs. However, traditional communication technologies such as cables and optical fibers have inherent shortcomings in construction, data interpretation, and cost. ELF electromagnetic waves are an ideal solution for communication in complex wellbore conditions due to long-distance communication and strong penetration capabilities, making it a highly effective option. Based on the theory of network splitting, this paper establishes a polygonal multiple-delays uncertainty coupled complex network model of ELF electromagnetic waves propagating through the casing in layered media and designs a controller, including expressions for the intensity of the magnetic and electric fields in different directions, and the propagation and distribution characteristics in different media. We determined that the optimal transmitting frequency of ELF electromagnetic waves under general conditions is 12.7 Hz. Based on field experiments, we verified that ELF electromagnetic waves can enable wireless wellbore communication within 1500 m without relays. We also analyzed the impact of casing thread deformation on ELF electromagnetic wave propagation due to high-temperature and high-pressure environments. We used simulation experiments to solve the distribution relationship between the electric and magnetic fields of the solenoids through casing and strata, as well as the coupling coefficients between the transmitting and receiving solenoids, and explore how different transmitting frequencies affect the efficiency of signal propagation. Both theories and experiments have verified the correctness of the model, and have also demonstrated the reliability and continuity of using ELF electromagnetic waves to achieve wireless wellbore communication, which provides a theoretical basis and feasibility for subsequent engineering applications.

Single-carrier 220-Gbit/s sub-THz wireless transmission over 214 m using a photonics-based system.

We have demonstrated, for the first time to our knowledge, a single-carrier 220-Gbit/s wireless link over 214-m distance within hard-decision forward error correction (HD-FEC) limit using a 300-GHz-band photonics-based system incorporated with on-line digital signal processing (DSP). The approach to obtaining these results was to optimize the transmission system by using a low-noised two-tone laser system to the transmitter and receiver and to apply the unique Fresnel region of the antenna to achieve longer distances. These research results are expected to serve as a low-cost and basic communication system technology for promising backhaul wireless communications in the sixth-generation era.

RF technology in wireless communications:From transceiver architecture to subsystem specifications

Radiofrequency (RF) technology is essential to wireless communication.The demand for RF technology research is growing as mobile, satellite, radar, and other fields advance. In recent years, the development of 5G and 6G technologies has raised the bar for in-depth RF technology research, requiring greater frequency and data transmission efficiency, among other things. In addition to providing a brief overview of the transceiver's components, the signal chain, and an introduction to the major RF technologies, this paper will concentrate on the architecture of RF transceivers in RF systems and the specification of sub-systems. It will also include references for the RF sub-system specifications and integration techniques. The comprehensive study of communication technology will benefit greatly from an in-depth grasp of the transceiver's capabilities. Lastly, an overview of the layout and features of RF transceivers is provided, along with a prediction of the future application-focused path of RF technology.

Design of RF Communication Control Module Based on FPGA

As society enters the era of the information explosion, the amount of information consumed per day has increased almost exponentially. At the same time, the corresponding transmission quality has also become higher and higher. These increasing indicators have promoted the continuous improvement of the standards of the carrier medium. At this stage, the vigorous development of the wireless communication field has brought about the rapid development of wireless communication technology, and technologies such as LTE and 5G have followed. While communication equipment continues to develop to solve the problems caused by the increase in the amount of information, more problems are constantly emerging: the wide variety of communication equipment causes great troubles for later maintenance and management; the imbalance of hardware resource allocation causes Too much waste of resources; more communication interference seriously affects communication quality... and many other problems. Therefore, the research on high-efficiency and high-performance wireless communication technologies and wireless communication systems is of great significance.

Performance improvement of slot antenna with metamaterial for modern wireless communication

A slot antenna has been widely used for multifunction in modern wireless communication technologies such as WLAN, WiMAX, IoT, and GSM. Generally, slot antennas can operate in wideband. Nevertheless, this antenna type was limited in terms of lower gain because of wideband operation. Therefore, this paper presents a slot antenna designed for operation frequencies between 1.8 GHz and 6.5 GHz and a study of the performance improvement of slot antennas with metamaterials to increase antenna quality. The utilization of metamaterials can improve the performance of slot antennas by increasing gain levels, reducing sidelobe levels, and optimizing reflection coefficients (S11). As a result, determine the metallic hole structure and wire medium structure put behind the slot antenna for comparing performance. All of them act like reflectors for reflected radiation from the back to the front, which improved the average gain of all operating frequencies from 3.41 dBi to 7.33 dBi for metallic hole structure and 7.42 dBi for wire medium structure. Moreover, the simulation and measurement gave great results. These proposed metamaterials provided enhanced gain and reduced sidelobe level.

6G is The Future of Connectivity

6G is the next generation of mobile communication technology, promising advancements in speed, latency, communication, and applications. Promises to be a major leap forward in wireless communication technology compared to 5G. AI will be utilized in 6G networks to manage networks intelligently, predict maintenance needs, and optimize resource allocation.

Impact of Antenna Orientation on Localization Accuracy Using RSSI-based Trilateration

The goal of the indoor localization is to determine the position and orientation of people, devices, and mobile robots. With the rise of Industry 4.0, wireless communication technologies have emerged as a rapidly evolving and crucial area for achieving this goal. Various radiocommunication-based technologies, including Bluetooth, Bluetooth Low Energy (BLE), Wi-Fi, Ultra-Wideband (UWB), and ZigBee offer means to indirectly estimate distance. These methods leverage diverse principles such as time-based measurements, signal strength, and angle of arrival. Indoor positioning systems can be categorized into two approaches: distance-based and distance-independent techniques. The Free Space Path Loss (FSPL) model describes the connection between distance and Received Signal Strength Indicator (RSSI). The parameters within this model significantly impact distance estimation and localization accuracy. Therefore, a method that accurately characterizes the model is critical. This work proposes an orientation-based localization technique utilizing RSSI and trilateration. Measurements were conducted between two ESP32 units in various orientations to obtain optimal parameters for each specific scenario. To assess the effectiveness of this approach, two scenarios were evaluated: one considering orientation and another neglecting it. The results show that incorporating orientation information leads to significantly more accurate positioning compared to the orientation-agnostic approach.

Optimization of UWB indoor positioning based on hardware accelerated Fuzzy ISODATA

With the development of wireless communication technology, Ultra-Wideband (UWB) has become an important solution for indoor positioning. In complex indoor environments, the influence of non-line-of-sight (NLOS) factors leads to increased positioning errors. To improve the positioning accuracy, fuzzy iterative self-organizing data analysis clustering algorithm (ISODATA) is introduced to process a large amount of UWB data to reduce the influence of NLOS factors, and to stabilize positioning error within 2 cm, enhances the accuracy of the positioning system. To further improve the running efficiency of the algorithm, FPGA is used to accelerate the key computational part of the algorithm, compared with running on the MATLAB platform, which improves the speed about 100 times, enhances the algorithm’s computational speed dramatically.

Energy efficiency optimization for 6G multi-IRS multi-cell NOMA vehicle-to-infrastructure communication networks

Intelligent Reflecting Surfaces (IRS), software-controlled metasurfaces, have emerged as an upcoming sixth-generation (6G) wireless communication technology. IRS intelligently manipulates and optimizes signal propagation using a large-scale array of intelligent elements, enhancing signal coverage, increasing capacity, mitigating path loss, and combating multipath fading This work provides a new energy-efficiency model for multi-IRS-assisted multi-cell non-orthogonal multiple access (NOMA) vehicular to infrastructure communication networks. The objective is the joint optimization of the total power budget at the roadside unit (RSU), NOMA power allocation for the user equipment, and designing phase shifts for IRS in each cell to maximize the achievable energy efficiency of the system. Due to non-convexity, the original non-convex problem is first decoupled and transformed using block coordinate descent and successive convex approximation methods. Then, an efficient solution is achieved using Gradient-based and interior-point methods. We also consider two benchmark schemes: (1) NOMA power optimization at RSU with random phase shift design at IRS and (2) orthogonal multiple access power allocation with optimal phase shift design at IRS. Numerical results show the superiority of the proposed solution compared to the benchmark schemes. The proposed solution outperforms the benchmarks, demonstrating a 59.57% and 151.21% improvement over the NOMA and orthogonal schemes, respectively, at pct=2 dBm. Additionally, it shows up to a 10.43% better performance than OMA at 10 IRS elements.

AoI-aware transmission control in real-time mmwave energy harvesting systems: a risk-sensitive reinforcement learning approach

The evolution of enabling technologies in wireless communications has paved the way for supporting novel applications with more demanding QoS requirements, but at the cost of increasing the complexity of optimizing the digital communication chain. In particular, Millimeter Wave (mmWave) communications provide an abundance of bandwidth, and energy harvesting supplies the network with a continual source of energy to facilitate self-sustainability; however, harnessing these technologies is challenging due to the stochastic dynamics of the mmWave channel as well as the random sporadic nature of the harvested energy. In this paper, we aim at the dynamic optimization of update transmissions in mmWave energy harvesting systems in terms of Age of Information (AoI). AoI has recently been introduced to quantify information freshness and is a more stringent QoS metric compared to conventional delay and throughput. However, most prior art has only addressed average-based AoI metrics, which can be insufficient to capture the occurrence of rare but high-impact freshness violation events in time-critical scenarios. We formulate a control problem that aims to minimize the long-term entropic risk measure of AoI samples by configuring the “sense & transmit” of updates. Due to the high complexity of the exponential cost function, we reformulate the problem with an approximated mean-variance risk measure as the new objective. Under unknown system statistics, we propose a two-timescale model-free risk-sensitive reinforcement learning algorithm to compute a control policy that adapts to the trio of channel, energy, and AoI states. We evaluate the efficiency of the proposed scheme through extensive simulations.

Effective capacity analysis of configurable intelligent surface-assisted NOMA communications systems

This paper investigates the integration of configurable intelligent surfaces (CIS) into relay radio networks, focusing on communication system enhancement. Towards this end, we propose CIS-assisted non-orthogonal multiple access (NOMA) communication systems to improve direct connections between a base station and two destination nodes. Our primary objective is to assess the net-work’s overall capacity, considering critical factors like signal-to-noise ratio, the number and placement of CIS components, quality of service exponent, and power distribution coefficients. Analytical equations developed in this research closely align with simulation results, validating our theoretical analysis. This study underscores the growing significance of CISs in modern communication systems, introducing adaptability and optimization to wireless networks. By exploring CIS-assisted NOMA communication systems, we contribute to dis-cussions about the evolving landscape of wireless communication technologies, poised to revolutionize information transmission and reception in the digital age.

Do 5G cell phone towers decrease house prices? Evidence from Warsaw

AbstractThis study investigates the impact of telecommunication infrastructure on residential property prices in Poland. This study contributes to the discussion of economic externalities related to new public infrastructure within the urban landscape. We use hedonic regression, matching techniques, and a difference-in-differences estimator to assess the impact of base transceiver stations on apartment prices in Warsaw, the capital of Poland, which covered market data on the sales of residential premises located in Miasteczko Wilanów estate in Warsaw from 2016 to 2021. In the analysed period, 1,825 residential sales were recorded and used for econometric modelling. The results do not confirm the influence of the vicinity of the wireless communication technology infrastructure on residential real estate prices in the studied local market. In particular, we did not observe a detrimental effect of cell phone towers on housing prices. Additionally, we investigate whether residential sale prices in proximity to BTS changed significantly after the introduction of the 5G standard. This particular issue has not been addressed in the economic literature. We found that the sale prices of apartments located in Warsaw were not statistically affected by the introduction of a fifth-generation technology standard for broadband cellular networks. Our research contributes to a better understanding of stigmatisation effects related to telecommunication infrastructure, and in particular, the links between the presence of cell phone towers and residential property values in the neighbourhood. The results may be of interest to all potential agents involved in neighbourhood conflicts arising from investments in cell phone towers and the development of new communication infrastructure in urban landscapes.

Energy saving performance analysis for future fifth generation millimetre-wave cellular networks

The deployment of fifth generation (5G) millimetre-wave (mmWave) base stations (BSs) will consume more energy over time due to the limited time available, despite the increasing interest in developing 5G mmWave wireless communication technology. Constructing 5G mmWave cellular network infrastructure can improve energy efficiency, which is a challenge to implement in heterogeneous networks. This paper presents analytical frameworks for monitoring the effectiveness of 5G mmWave cellular networks. Based on the state management of BS, a system model for 2-tier heterogeneous networks is developed, and particle swarm optimization (PSO) is then used to compute the total energy consumption of the heterogeneous networks. Energy consumption was compared and analysed by leveraging state switching and the aggregate delay for three methods: fundamental separation, conventional separation, and a proposed energy-saving method that introduced a sleep state. Simulation shows that the proposed energy-saving method, which is a combination of conventional separation approaches, has the lowest total energy consumption and offers a 9% reduction compared to other related works. The results validate the accuracy of the power usage used in the 5G mmWave cellular network of the proposed method.