Wilkinson Power Divider Research Articles

Simple Compact UWB Vivaldi Antenna Arrays for Breast Cancer Detection

In this study, at ultra-wideband (UWB) frequency band (3.1–10.6 GHz), we propose the use of compact 2:1 and 3:1 nonuniform transmission line Wilkinson power dividers (NTL WPDs) as feeding networks for simple 2 × 1 linear UWB Vivaldi tapered and nonuniform slot antenna (VTSA and VNSA) arrays. The 2:1 and 3:1 tapered transmission line (TTL) WPDs are designed and tested in this work as benchmarks for NTL WPDs. The VTSA array provides measured S11 < −10.28 dB at 2.42–11.52 GHz, with a maximum gain of 8.61 dBi, which is 24.39% higher than the single element. Using the VNSA array, we achieve 52% compactness and 6.76% bandwidth enhancement, with good measured results of S11 < −10.2 dB at 3.24–13 GHz and 15.11% improved gain (8.14 dBi) compared to the VNSA single element. The findings show that the NTL and Vivaldi nonuniform slot profile antenna (VNSPA) theories are successful at reducing the size of the UWB WPD and VTSA without sacrificing performance. They also emphasize the Vivaldi antenna’s compatibility with other circuits. These compact arrays are ideal for high-resolution medical applications like breast cancer detection (BCD) because of their high gain, wide bandwidth, directive stable radiation patterns, and low specific absorption rate (SAR). A simple BCD simulation scenario is addressed in this work. Detailed parametric studies are performed on the two arrays for impedance-matching enhancement. The computer simulation technology (CST) software is used for the simulation. Hardware measurement results prove the validity of the proposed arrays.

Compact filtering power divider for mm‐wave applications using integrated passive device technology

AbstractWe present a compact, filtering power divider (FPD) using integrated passive device technology (IPD) for mm‐wave applications. Our proposed FPD design integrates quarter‐wavelength coupled‐resonator bandpass filters with a Wilkinson power divider, using size reduction techniques. Coupled coplanar waveguides provide excellent coupling while occupying a small area, and metal‐insulator‐metal capacitors offer the required λ/4 phase shift without length extension. The center frequency of the filtering power divider/combiner (FPD/C) is located at 30‐GHz. We demonstrate our FPD design by fabricating four prototypes with parameter variations. The insertion loss, fractional bandwidth, and size of the FPD/C designed in this study are from 2.56 to 3.3 dB, from 9.67% to 19.4%, and from 0.592 to 0.220‐mm2, respectively. In addition, the return loss of all models at the center frequency is 28.5 dB or more, and the isolation is 16.6 dB or more.

Miniaturized equal/unequal Wilkinson power dividers capable of harmonic suppression utilizing microstrip π-shaped resonators modified by lumped elements

In this paper, modified π-shaped resonator composed of both microstrip transmission lines and lumped elements are employed to design a Wilkinson power divider. Utilizing these resonators leads to designing a compact divider featuring a selectable operating frequency with optional power division ratio and very wide-range harmonic suppression. To vary the operating frequency and the power division ratio, the values of just the utilized lumped elements are changed without manipulating the dimensions of microstrip lines. As a design sample, a miniaturized divider capable of operating at four frequencies i.e., 0.5, 1.0, 1.5 and 2 GHz with optional equal or unequal power division and harmonic suppression ability at each of these frequencies is designed and simulated. Finally, as a feasible sample, another Wilkinson power divider which can optionally operate at 700 MHz with equal power division or 1.2 GHz with unequal power division is designed and implemented. Based on the measurement results, the spurious harmonics from 2nd to 25th in the 700 MHz-divider and 2nd to 15th in the 1.2 GHz-divider are suppressed. Moreover, almost 96% and 93% size reduction at 700 MHz and 1.2 GHz, respectively, are achieved. The S21 and S31of the unequal divider are − 8.8 and − 3.73 dB, which indicate an unequal 3.2:1 power division.

Antenna array-based metasurface for multi-scenario wide-angle polarization-insensitive radar cross section reduction

In this paper a novel antenna array-based metasurface design method for wide-angle and polarization-insensitive radar cross section (RCS) reduction has been proposed, which can be applied to a variety of RCS reduction scenarios. The proposed metasurface subarray design employs a dual-element antenna array in which the two ports of each element are connected through a Wilkinson power divider, and meanwhile, two power dividers are connected through a microstrip line with a lumped resistor. The use of dual-polarized wide-beam antennas enables the metasurface array to respond to arbitrarily polarized as well as wide-angle obliquely incident electromagnetic waves. A portion of the electromagnetic waves received will be absorbed by the lumped resistor and converted into heat, while the remaining portion will be canceled in the space, achieving the low RCS characteristic. The proof-of-concept experiments have been conducted in several application scenarios for RCS reduction, including a metasurface array integrated with a microstrip antenna, a densely distributed dual-element metasurface array, and a randomly distributed dual-element metasurface array. Simulated and measured results confirm that the proposed method opens up a new avenue for more flexible and versatile RCS reduction devices and systems.

Wideband filtering power divider based on D-CRLH resonator

In this paper, a wideband filtering power divider (FPD) based on dual-composite left–right-handed (D-CRLH) resonator is proposed. The D-CRLH filter unit, featuring a parallel stepped impedance resonator (SIR), is used to replace the λ/4 transmission line of the Wilkinson power divider, which can make the FPD more compact. Due to the inherent characteristics of D-CRLH resonator, two transmission zeros can be generated on both sides of the passband, so the proposed power divider based on the D-CRLH resonator can achieve a quasi-elliptic filtering response. To further enhance anti-interference ability at low frequencies, a pair of open stubs is added to the output feedline to introduce an additional transmission zero on the low-frequency side of the power divider passband. Finally, isolation resistors are introduced on the input and output feedlines to improve the isolation between the output ports. For validation, a prototype with a center frequency of 3.6 GHz is fabricated and measured, with −10 dB fractional bandwidths (FBWs) of 58.3 %(2.55–4.65 GHz). The measurement results are basically consistent with the simulation results, and its isolation in the passband is all more than 13.8 dB.

A review of beamforming microstrip patch antenna array for future 5G/6G networks

With the increase in demand for high data rates and high bandwidth because of multiple users all over the globe, the technology has moved toward the next-generation of wireless communication. This rapid advancement of wireless communication technologies has led to the emergence of 5G networks, which promise significantly higher data rates, lower latency, and enhanced connectivity. Researchers believe that five essential techniques can enable 5G. Beamforming is one of those essentials, as it plays a vital role in achieving reliable and high-capacity communication. This review article portrays a comprehensive analysis of the 5G beamformer Microstrip Patch Antenna array techniques for communication systems. The paper comprises of a deep overview of the fundamental concepts and principles of beamforming, including analog, hybrid, and digital beamforming techniques. It explores the advantages and disadvantages of each approach and discusses their suitability for 5G applications. An in-depth examination of various beamforming techniques employed in 5G, encompassing traditional beamforming, massive Multiple-Input-Multiple-Output beamforming, hybrid beamforming, and adaptive beamforming. The discussion encompasses the strengths, weaknesses, and performance trade-offs of each technique, along with their applicability in diverse deployment scenarios and applications. The review of multiple couplers that are used for the feeding of the antenna is discussed with included hybrid coupler, Wilkinson power divider, branch line coupler, and butler matrix in beamformer smart antenna for 5G/6G communications. Numerous beamforming techniques are compared based on their merits, demerits, and applications. Moreover, the dielectric substrate utilized to design the beamformer was also reviewed. The findings presented in this paper serve as a valuable resource for the researcher, scholars, and engineers working in the field of 5G wireless communications and antenna designing, facilitating the development and deployment of efficient and robust beamforming solutions for future 5G networks.

A simple design of low-loss quad-band Wilkinson power dividers

Abstract In this paper, a novel design method for quad-band Wilkinson power dividers is proposed. The design method is based on using a quad-band microstrip line. In comparison with other design methods, the proposed method has the advantages of simplicity and low insertion loss. To validate the proposed method, an equal quad-band power divider operating at four bands of 0.7, 1.2, 1.78, and 2.28 GHz was simulated and measured. Good agreement between measured results and simulated ones is obtained. The measured results show that the developed quad-band power divider features low insertion loss of less than 0.75 dB, isolation greater than 20.92 dB, and return loss better than 18 dB at four operating bands.

Diplexer Antenna for 5G Full-duplex Application

This work proposes a spiral filter-based diplexer antenna for dual-band full-duplex 5G application in C-band. The shared radiator is formed by a cross-shape Yagi-Uda antenna. The dual-band full-duplex characteristic is obtained by applying a diplexer with two different band-stop filters (BSFs) based on a high-order rectangular spiral-shaped open-stub filter. The proposed diplexer antenna is suitable for modern 5G full-duplex communication system applications with a small frequency ratio and high isolation between two ports by applying a Wilkinson power divider. The diplexer antenna is designed, fabricated, and measured, showing good performance of channel isolations of 27 dB/23 dB and the antenna gain of 4.7 dBi/4.2 dBi at two operation bands from 3.56 GHz to 3.68 GHz and from 3.72 GHz to 3.83 GHz covering the required 100 MHz maximum bandwidth in C-band while its frequency ratio is only 1.04.

A Wilkinson power divider with harmonic suppression through low-pass filter for GSM and LTE applications

Conventional Wilkinson power dividers (WPDs) perform satisfactorily near the intended operation frequency. Nonetheless, these WPDs demonstrate subpar performance in the stopband and necessitate a significant physical space. To enhance the existing level of advancement and in order to improve on the current state-of-the-art, a modified WPD is designed and fabricated, demonstrating a significant improvement in stopband and superior isolation between output ports. To improve the stopband and suppress unwanted harmonics, a low-pass filter (LPF) structure is placed in the both branches of the conventional WPD. The proposed modified WPD depicts a wide stopband bandwidth (fSB > 17.25 GHz) from 2.75 to over 20 GHz with an attenuation level of 20 dB, suppressing 2nd to 11th harmonics. According to measured results, the input return loss (|S11|), insertion loss (|S21|) and output isolation (|S32|) at f = 1.8 GHz are better than 33 dB, 3.2 dB and 21 dB, respectively. Indeed, the proposed modified WPD exhibits a magnitude imbalance of 0.00018, a phase imbalance of 1.25 degrees and a group delay of 0.5 ns. The proposed WPD depicts a compact size of 35 mm × 25 mm (0.38 λg × 0.27 λg), where λg is the guided wavelength at f = 1.8 GHz. There is a good agreement between the simulated and measured results. According to the obtained results, the proposed modified WPD shows a desirable performance for modern LTE and GSM communication applications.

Harmonic Suppressed Wilkinson Power Divider Using Parallel Resonant Shunt Stub

This paper proposes a harmonic-suppressed Wilkinson power divider (HS WPD) utilizing parallel resonant shunt stubs (PRSSs). PRSSs are integrated into the conventional WPD by adding functionalities such as bandpass filtering, harmonic suppression, and physical port separation. The resonance conditions and design equations of the PRSS are theoretically derived and verified through circuit simulations. Using the PRSS, we designed an HS WPD operating at 1 GHz. The fabricated HS WPD demonstrated an insertion loss of 3.2 dB at the fundamental frequency, with a wide 3 dB bandwidth of 129%. The harmonic suppression levels at the 2nd and 3rd harmonic frequencies are measured to be 21.0 dB and 25.8 dB, respectively. The measured input return loss at the fundamental frequency was 27.9 dB, whereas the output return loss was 24.6 dB. Additionally, the HS WPD demonstrates isolation levels at the fundamental, 2nd, and 3rd harmonic frequencies, with levels of 29.2 dB, 17.8 dB, and 47.1 dB, respectively. It also exhibited broadband isolation (>8.7 dB) across the frequency range of 100 kHz to 3.35 GHz. The PRSS design allows for the physical separation of the ports without requiring additional circuitry. Compared to previously reported PDs, the proposed design offers multiple functions in a compact size, making it highly suitable for various microwave systems.

A modified Wilkinson power divider with improved in-band performance and compact size

A modified Wilkinson power divider with improved in-band performance and compact size

A Dynamic Array Using Spatial Amplitude Modulation With an Asymmetric Wilkinson Power Divider for Secure Wireless Applications

A Dynamic Array Using Spatial Amplitude Modulation With an Asymmetric Wilkinson Power Divider for Secure Wireless Applications

A reconfigurable Wilkinson power divider based on transmission-line phase shifter for 5G new radio

A reconfigurable Wilkinson power divider based on transmission-line phase shifter for 5G new radio

DESAIN ANTENA MIKROSTRIP RADAR CUACA PESAWAT PADA FREKUENSI 9,4 GHZ

The application of radar in the world of aviation is the existence of aircraft weather radar to monitor weather conditions around the aircraft in real time. Aircraft weather radar requires an antenna to support detection. The author makes microstrip antenna design research using the Wilkinson Power Divider (WPD) method combined with array techniques to produce high gain parameters. The research method uses 4D from Thiagarajan, namely Define, Design, Develop and
 
 Disseminate. To obtain high gain, this study designs single patch, 1x2, 4x4, and 8x4 antenna designs with insert feed and coaxial integration techniques. Then compare based on the substrate used, namely FR-4 and Rogers RT-5880. Analysis includes gain, VSWR, return loss, bandwidth and radiation pattern. The microstrip design is made by doing antenna calculations and determining the method used, namely array and WPD, then designing the design in the application. The FR-4 and Rogers RT- 5880 substrate microstrip antenna design has a VSWR value <2 and return loss <- 10 dB. The highest gain on the 8 x 4 insert feed Rogers RT-5880 array was 17.979 dBi and the bandwidth with the highest value of the 1x2 Rogers RT-5880 array was 651.1 MHz. Gain increases proportional to the number of patches. The Rogers RT- 5880 material produces higher gain than FR-4.

Design a Wilkinson power divider with improved passband and rejection band

ABSTRACT In this paper, a Wilkinson power divider based on a new harmonic suppressor structure is proposed with suppressed harmonics and improved operating band parameters. The proposed suppressor structure consists of three resonators. The first resonator is an elliptic rectangular shaped resonator with a short base line and two slots. These slots decrease the resonant frequency location, without changing the dimensions of the resonator. This mode has been fully analysed by investigating the effect of surface current density. The second resonator is an elliptic resonator with a long base length to suppress the second harmonic. The third resonator is a rectangular suppressor to suppress higher order harmonics. The proposed power divider is fabricated and measured. The operating frequency of this power divider is 1.26 GHz, the return loss is 31.5 dB and the insertion loss is 3.1 dB. The operating bandwidth is from 0.99 to 1.4 GHz with a return loss better than 15 dB which shows the fractional bandwidth of FBW = 34%. The second to sixth harmonics have suppression level better than 50 dB, and for higher harmonics up to the 14th harmonic, they have suppression level better than 25 dB.

Highly Efficient GaN Doherty Power Amplifier for N78 Sub-6 GHz Band 5G Applications

In this paper, a high-efficiency GaN Doherty power amplifier (DPA) for 5G applications in the N78 sub-6 GHz band is introduced. The theoretical analysis of the matching networks for the peak and carrier transistors is presented, with a focus on the impact of unequal power splitting for both transistors and the recommendation of a post-harmonic suppression network. The proposed design features an unequal Wilkinson power divider at the input and a post-harmonic suppression network at the output, both of which are crucial for achieving high efficiency. The Doherty power amplifier comprises two GaN 10 W HEMTs, measured across the 3.3 GHz to 3.8 GHz band (the N78 band), and the results reveal significant improvements in gain, output power, drain efficiency, and power-added efficiency. Specifically, the proposed design achieved a power gain of over 12 dB and 42 dBm saturated output power. It also achieved a drain efficiency of 80% at saturation and a power-added efficiency of 75.2%. Furthermore, the proposed harmonic suppression network effectively attenuated the harmonics at the output of the amplifier from the second to the fourth order to more than −50 dB, thus enhancing the device’s linearity.

A Simple Interference and Power-based Direction of Arrival Measuring System for Modern Communication

In this paper, we present a system specialized for measuring the direction-of-arrival (DoA) of electromagnetic waves with noticeable simplicity. Unlike common methods, which are based heavily on complex computation and signal processing, our proposed system is considerably simpler, both in terms of design and operating theory. Our design consists of two directional antennas for collecting incident waves, a system of Wilkinson power combiners and dividers in which the waves collected by the antennas interfere, a result-processing block consisting of power amplifiers, rectifiers, and a microcontroller unit that respectively converts the interferometric radio-frequency (RF) signal into direct-current (DC) signal, measures its corresponding power before calculating the incident angle solely based on a simple trigonometric equation. The system yields a high accuracy of less than 7.5o with the incident angle ranging from −60o to 60o.

Design of the Wilkinson power divider with multi harmonic suppression

Abstract A Wilkinson power divider (PD), which can suppress the second, third, and fourth harmonics is proposed. The PD is implemented based on an asymmetric meta-structure. The meta-structure is constructed be combing defect ground structure (DGS) and spoof surface plasmon polariton (SSPP). It can not only realize the impedance conversion function in the operating frequency band, but also realize the suppression of the second, third, and fourth harmonics. The simulation and measurement results show that this structure can achieve −32 dB suppression for the second harmonic, −31 dB suppression for the third harmonic, and −28 dB suppression for the fourth harmonic respectively.

Design and Development of Mini-Compact Wilkinson Power Divider for X-Band Man-Pack Surveillance Radar

This paper presents the design and development of a mini-compact Wilkinson Power Divider (WPD) operating at 9.3 GHz, with a wide bandwidth of 200 MHz, for the Man-Pack Surveillance Radar (MPSR) application. The design of the WPD was carried out using Advanced Design System (ADS) software with a microstrip feeding technique. The substrate material used in this design was Duroid Roger 5880, which has a thickness (h) of 1.575 mm, dielectric constant (εr) of 2.20, and loss tangent (tan δ) of 0.0009. A WPD was designed, developed, and measured. The simulation results obtained included return loss (S11) -37.50 dB, (S22) -26.59 dB, (S33) -26.09 dB, insertion loss (S21) -3.61 dB and (S31) - 2.55 dB, and isolation (S32) -12.89 dB. Overall, the simulation result parameters worked at a frequency of 9.3 GHz. Furthermore, when the WPD measurement produces a measured return loss of (S11) -28.69 dB, (S22) -28.5 dB, (S33) -29.95 dB, insertion loss (S21) -6.61 dB, and (S31) -7.55 dB, and isolation (S32) -21.89 dB. The dimensions resulting from the realization were 20.5 mm x 20 mm.

Design and Implementation of a Wilkinson Power Divider with Integrated Band Stop Filters Based on Parallel-coupled Lines

This paper presents a technique to improve the spurious suppression performance at the second harmonic (2f0) of a Wilkinson power divider. The technique is achieved by the insertion of bandstop filters realizing with parallel-coupled lines with the characteristic impedance of 2√Z0Ω and the electrical length of λ/8 in a conventional structure. The simulated and measured results of the conventional and the proposed divider are compared at 0.9 GHz. The insertion losses (S21, S31) are less than 3.1 dB, while the return losses (S11) are less than 34.6 dB across 100% fractional bandwidth. Moreover, the proposed Wilkinson power divider achieves more than 25.5 dB suppression at 2f0.