In azimuth multichannel high-resolution and wide-swath (AMC-HRWS) synthetic aperture radar (SAR) system, undersampling of azimuth signal results in the failure of the single-channel echo imaging, so the echoes of all the channels should be reconstructed to obtain the unambiguous SAR image. Many methods have been proposed to reconstruct the stationary scene echoes. However, moving targets (MTs) will cause false targets in the reconstructed SAR image, which has a great influence on SAR image interpretation and moving target detection, especially in maritime scenes. Hence, we propose an unambiguous imaging method of the moving target for maritime scenes with AMC-HRWS SAR. First, azimuth deramp processing is introduced to obtain coarse-focused moving targets, and then their echoes can be extracted from the sea clutter. Based on the extracted data, a radial velocity estimation method is proposed, which is high efficiency and does not require redundant channels. In addition, based on the estimated radial velocity and the characteristics of the coarse-focused signal, a novel signal reconstruction method of moving target is presented. The reconstruction performance of this method is not affected by channel imbalance, and false targets can be removed even if there is radial velocity error. Besides, the effectiveness of this scheme is verified by the simulation data and GaoFen-3 SAR real data. The estimated radial velocities of ships are verified by automatic identification system (AIS) information. The imaging results show that false targets are effectively suppressed, and moving targets are located in correct positions.