Wide Range Of Polarities Research Articles

Comprehensive characterization of active components in Salvia miltiorrhiza using polarity-partitioned two-dimensional liquid chromatography coupled with mass spectrometry

Salvia miltiorrhiza, a widely used traditional Chinese medicine, contains a complex matrix of hydrophobic diterpenoids and hydrophilic phenolic acids, presenting significant challenges in comprehensive analysis. In this study, an online polarity-partitioned two-dimensional liquid chromatography coupled with mass spectrometry (2D-LC-MS) method was developed for comprehensive analysis of both lipophilic and hydrophilic active components in Salvia miltiorrhiza. The method integrated hydrophilic interaction liquid chromatography (HILIC) and reversed-phase liquid chromatography (RPLC), facilitating the efficient separation of compounds across a wide range of polarities. An online dilution strategy was implemented, minimizing sample loss and enhancing the method's utility for quality control and chemical characterization of complex herbal matrices. Compared with other LC methods, this approach significantly improved analyte coverage, resolution, and analysis efficiency. Under optimal conditions, 150 active components were successfully identified, including 33 compounds newly discovered in Salvia miltiorrhiza. Additionally, the validated online method was applied to the quantitative determination of 16 quality markers of Salvia miltiorrhiza from different sources. The results demonstrated the online method's potential as a superior alternative to existing techniques, offering broader applicability in traditional Chinese medicine research.

Custom GC×GC configuration for the selective isolation or removal of compounds from complex samples

We developed a novel approach to selectively isolate or remove nearly any compound from complex mixtures of volatile organic compounds. This was achieved by customizing a GC×GC system with a Deans switch, a passive splitter, and a custom-made adapter for sample recollection. The new setup was evaluated with 106 standard chemicals covering a wide range of volatility (boiling points: 56 – 343 ⁰C) and polarity (log P: 0.2 – 9.4). The method was used to remove two notorious malodorous compounds from spoiled wine samples. We found that the recovery can be maximized if a custom-made adapter is attached directly on the flame ionization detector port (average recovery rate of 76 ± 7 % for the standards). Eventually, we could selectively isolate or remove chemicals with peaks separated by a minimum distance of 50 ms for the second column throughout the whole chromatographic run. The developed system is expected to mainly be used in the field of flavor and fragrance analysis (i.e., selection of flavors and odorants of interest or removal of off-flavor or malodorous compounds). At present, we can reasonably collect about 100 ng of each single compound and are currently working on sample enrichment to improve our method to isolate sufficient amounts for further chemical analysis (e.g. high sensitivity nuclear magnetic resonance or chemical ionization tandem mass spectrometry).

Cyano-modified molecular cage silica gel stationary phase: Multi-functional chromatographic performance by high-performance liquid chromatography

This study successfully prepared different loading levels of cyano-functionalized RCC3 molecular cage silica gel stationary phase (RCC3-CN@SiO2) through aldehyde-amine condensation reaction and subsequent modification strategies. Fourier transform infrared spectroscopy, thermogravimetric analysis, nitrogen adsorption-desorption, and scanning electron microscopy confirmed the successful synthesis of RCC3-CN@SiO2 chromatographic stationary phase. The research demonstrates that due to hydrophobic/hydrophilic interactions, π-π interactions, hydrogen bonding, and size-selective porous structure, the stationary phase effectively separates moderately polar and weakly polar compounds in reversed-phase liquid chromatography (RPLC) mode, exhibiting hydrophobic selectivity comparable to the commercial DaisoC18-RP columns. Additionally, the tertiary amine and cyanogen groups on the molecular cage surface enhance the interaction with polar compounds, successfully separating nucleosides, sulfonamides, amino acids, and sugars in hydrophilic interaction chromatography (HILIC) mode. Further applications in the separation analysis of acidic drugs, alkaline drugs, cinnamic acid natural products, and chiral compounds demonstrate the multifunctional chromatographic capabilities for diverse compound types. Compared to Unitary Diol commercial columns, the prepared stationary phase showed significant advantages in wide polarity range separation performance. Moreover, through nucleoside compound separation mode switching analysis, RCC3-CN@SiO2 stationary phase further validates its favorable performance in both RPLC and HILIC modes, demonstrating extensive potential applications in the field of analytical chemistry. Importantly, the stationary phase exhibits efficient separation of nucleoside compounds in pure water systems, aligning with the principles of green analysis.

The amenability of different solvents to electrospray ionization mass spectrometry

Electrospray ionization mass spectrometry is capable of transferring ions from solution to the gas phase across a broad range of solvents. A systematic investigation of the relative performance of different solvents has not been previously conducted, and we sought to remedy this situation. Fourteen solvents across a wide range of polarities were investigated for their ability to provide strong signals for four permanently charged ions. We found the best solvents to be acetone, acetonitrile, dichloromethane, tetrahydrofuran, and the previously unused (in an ESI-MS context) trifluorotoluene.

Rapid determination of 54 dye components in hair dyes by liquid chromatography coupled to quadrupole orbitrap high-resolution mass spectrometry.

Chemical hair dye components can have allergenic, reproductive, and carcinogenic risks. Detecting restricted and prohibited ingredients in these products is challenging due to product diversity, isomer separation, instability, and wide polarity range. A method was developed using HPLC-high-resolution mass spectrometry for the qualitative and quantitative analysis of 54 hair dye components in various products. Samples were extracted with a 70% methanol solution, ultrasonicated in an ice bath, centrifuged, filtered, diluted with 25% methanol solution and 25% methanol solution containing 0.05% D-isoascorbic acid. Separation was achieved using an ACE Excel 3 C18 column (2.1 mm × 150 mm, 3 μm) with analysis conducted via quadrupole Orbitrap mass spectrometry. It showed good linear correlations, with detection limits of 0.1-23.5 ng mL-1, and quantitation limits of 0.2-78.1 ng mL-1. Average recovery ranged from 60.0% to 118.4%, with repeatability from 4.0% to 14.9%. Stability was confirmed within 48 hours. When applied to 20 batches of commercially available hair dyes, 24 hair dye components were found within permissible levels. The method is crucial for quality control of hair dyes, covering 10 common prohibited and 44 permissible hair dye components outlined in the Safety and Technical Standards for Cosmetics (2015 Edition). Compared to the standard methods, it can separate isomers in a single mobile phase system within 15 minutes in positive ion mode while maintaining sensitivity for phenol, hydroquinone, and other components in negative ion mode. Moreover, the pre-treatment strategy significantly improved stability and accuracy, enabling precise analysis of the 54 hair dye components.

Development of an Ultrasonic Nebulization System for an Inverse Low Temperature Plasma Ionization Source.

An effective nebulization and evaporation of a liquid sample, like in liquid chromatography, mass spectrometry (LC-MS) couplings, is an essential requirement for the ionization of analyte molecules in the gas phase by, for example, atmospheric pressure chemical ionization (APCI) or the novel low temperature plasma (LTP)-based ion source. These LTP-based ion sources have recently gained interest in the field of atmospheric pressure ion sources, as they can cover a wide range of polarity and molecular mass. They can be used in combination with separation techniques like liquid chromatography or used as an ambient ion source. However, commercial nebulizer systems are of course not constructed to fit to home-built LTP-based ion sources, and this was one incentive to develop a new nebulization system. Instead of an atmospheric pressure chemical ionization (APCI) nebulizer, two commercial nebulizers were disassembled and remodeled to be used as nebulizing systems in an LC-MS setup using an LTP-based ion source. Based on these results, a novel nebulizer system was subsequently developed. To further improve the degree of ionization, cones to focus the LC eluent spray on the plasma region, heating applications, and auxiliary nitrogen gas for dispersion of the solvent droplets were implemented. The LOD that could be calculated via the rule of three resulted in an average of 2.0 μg/L for the APCI-nebulizer and 41 μg/L for the USN. Both could be reduced to 1.4 and 18 μg/L, respectively, by using a TPI-configuration instead of an iLTP. The linearity was equally good for both types of nebulization devices. The final nebulizer could also be operated with a high water content and flow rates higher than those of the two previous ones, indicating an important improvement step.

Preparative separation of ten flavonoids from Scutellaria baicalensis Georgi roots using two-dimensional countercurrent chromatography with an online-storage, dilution, and mixing interface

The process of counter-current chromatography (CCC) separation for natural products typically necessitates the use of multiple solvent systems to accommodate constituents with a wide range of polarities. However, the incompatibility between these different solvent systems often results in unsuccessful online 2D successive separations. In this study, a 2D CCC system was developed, featuring an interface for online-storage, dilution, and mixing. It facilitated the implementation of online 2D CCC using different solvent systems. The method was subsequently applied for the preparative isolation of flavonoids from Scutellaria baicalensis Georgi roots. For 1D CCC, n-heptane-ethyl acetate–methanol-water (HepEMWat, 5:5:4:6, v/v) was utilized, while for 2D CCC, ethyl acetate-n-butanol-water (EBuWat, 0:5:5, v/v) was employed. The eluent with low resolution in 1D CCC was stored online, diluted three times using the lower phase of EBuWat (0:5:5, v/v), and subsequently transferred into 2D CCC for further isolation utilizing the same EBuWat (0:5:5, v/v) system. As results, six lipophilic compounds were isolated in 1D CCC in a normal mode, while two major hydrophilic constituents were isolated in a pH-peak-focusing mode in 2D CCC. Additionally, two additional compounds were purified through subsequent semi-preparative HPLC separation in order to resolve co-elution in 2D CCC. The developed 2D CCC system with a multifunctional interface demonstrated to be an exceptionally efficient and promising approach for the high-throughput purification of complex natural products.

Salt assisted liquid-liquid extraction combined with dispersive liquid-liquid microextraction for the determination of 24 regulated polycyclic aromatic hydrocarbons in human serum

Polycyclic aromatic hydrocarbons (PAHs) are persistent organic pollutants of great concern due to their carcinogenicity and mutagenicity. Their determination in human serum, particularly in at-risk populations, is necessary but difficult because they are distributed over a wide range of polarity and are present at trace level. A new method combining salting-out assisted liquid-liquid extraction (SALLE) and dispersive liquid-liquid microextraction with solidification of floating organic drop (DLLME-SFO) adapted to a reduced volume of sample (100 µl) was developed to determine 24 PAHs in human serum. Some key parameters of DLLME-SFO (volume of extraction solvent, ratio of extraction/dispersive solvent volumes, and salt addition) were first studied by applying it to spiked pure water. For its application to serum, a sample treatment step involving SALLE was optimized in terms of nature and content of salts and applied upstream of DLLME-SFO. It was applied to the extraction of 24 regulated PAHs from spiked serum followed by an analysis by liquid chromatography coupled with UV and fluorescence detection. The extraction recoveries ranged from 48.2 and 116.0 % (relative standard deviations: 2.0–14.6 %, n=5–9), leading to limits of quantification of PAHs in human serum from 0.04 to 1.03 µg/L using fluorescence detection and from 10 to 40 µg/L using UV detection. This final method combining SALLE and DLLME-SFO showed numerous advantages such as no evaporation step, high efficiency and low solvent-consumption and will be useful for monitoring PAHs in low volumes of serum.

Nitrogen-doped magnetic porous carbon nanospheres derived from dual templates-induced mesoporous polydopamine coated Fe3O4 for efficient extraction and sensitive determination of volatile nitrosamines by gas chromatography-mass spectroscopy

N-nitrosamines (NAs) are highly carcinogenic compounds commonly found in food, beverages, and consumer products. Due to their wide polarity range, it is challenging to find a suitable carbon adsorbent that can simultaneously adsorb and enrich both polar and nonpolar NAs with good recovery. In this study, nitrogen-doped magnetic mesoporous carbon nanospheres (M-MCN) were prepared and employed as an adsorbent for magnetic solid-phase extraction (MSPE) to extract and concentrate four NAs. The introduction of nitrogen functional groups enhanced the hydrophilicity of the carbon material, allowing M-MCN to achieve a balance between hydrophilicity and hydrophobicity, resulting in good recovery for both polar and nonpolar NAs. A method combining MSPE with gas chromatography-mass spectrometry (GC-MS) was developed for the determination of NAs in processed meat and alcoholic beverages. The method exhibited a good linear range (1–100 ng g−1, r2 > 0.9967) and trace-level detection (0.53–6.6 ng g−1). The recovery rates for the four NAs ranged between 85.7 and 110.7 %, with intra-day precision expressed as relative standard deviation (RSD) between 4.1 and 10.7 %, and inter-day precision between 4.8 and 12.9 %. The results demonstrated not only good accuracy and precision but also provided a new adsorbent for the enrichment of trace-level NAs in processed meat and alcoholic beverage samples.

Development of a Green Water-Induced Restricted Access Supramolecular Solvent Microextraction Method for Highly Improved Determination of Pesticides with a Wide Range of Polarity in Water Samples and Cereal Flours

Development of a Green Water-Induced Restricted Access Supramolecular Solvent Microextraction Method for Highly Improved Determination of Pesticides with a Wide Range of Polarity in Water Samples and Cereal Flours

Comprehensive Metabolomic Analysis of Human Heart Tissue Enabled by Parallel Metabolite Extraction and High-Resolution Mass Spectrometry.

The heart contracts incessantly and requires a constant supply of energy, utilizing numerous metabolic substrates, such as fatty acids, carbohydrates, lipids, and amino acids, to supply its high energy demands. Therefore, a comprehensive analysis of various metabolites is urgently needed for understanding cardiac metabolism; however, complete metabolome analyses remain challenging due to the broad range of metabolite polarities, which makes extraction and detection difficult. Herein, we implemented parallel metabolite extractions and high-resolution mass spectrometry (MS)-based methods to obtain a comprehensive analysis of the human heart metabolome. To capture the diverse range of metabolite polarities, we first performed six parallel liquid-liquid extractions (three monophasic, two biphasic, and one triphasic) of healthy human donor heart tissue. Next, we utilized two complementary MS platforms for metabolite detection: direct-infusion ultrahigh-resolution Fourier-transform ion cyclotron resonance (DI-FTICR) and high-resolution liquid chromatography quadrupole time-of-flight tandem MS (LC-Q-TOF-MS/MS). Using DI-FTICR MS, 9644 metabolic features were detected where 7156 were assigned a molecular formula and 1107 were annotated by accurate mass assignment. Using LC-Q-TOF-MS/MS, 21,428 metabolic features were detected where 285 metabolites were identified based on fragmentation matching against publicly available libraries. Collectively, 1340 heart metabolites were identified in this study, which span a wide range of polarities including polar (benzenoids, carbohydrates, and nucleosides) as well as nonpolar (phosphatidylcholines, acylcarnitines, and fatty acids) compounds. The results from this study will provide critical knowledge regarding the selection of appropriate extraction and MS detection methods for the analysis of the diverse classes of human heart metabolites.

Ethosomes: Novel Vesicular Carriers for Effective Transdermal Delivery of Natural Therapeutics

Abstract: The topical delivery, being the most reliable route for drug administration, offers multiple advantages. The conventional topical dosage forms deliver a relatively higher amount of drug to achieve therapeutic action triggering hypersensitivity reactions accompanied by greasiness and staining issues. The advent of transdermal nanocarriers has waived off some of these limitations and assisted in achieving enhanced therapeutic efficacy with sustained release and minimal/no instances of systemic toxicity. The ethosome, one of the novel lipid carrier systems, has eased the administration of many hydrophilic and lipophilic drugs through the stratum corneum. It is a non-invasive drug carrier consisting of 45% ethanol, phospholipids, and non-ionic surfactants. The discovery of ethosomal technology has proved to be fruitful in delivering drugs with a wide range of polarity and other physicochemical parameters across skin. In this review, the ethosomal system has been explored for the delivery of complex phytoconstituents across the skin along with the key building material of ethosomes, associated mechanism of drug delivery, recent developments in ethosomes as a drug carrier, reported ethosomal formulations encapsulating various plant metabolites, conducted clinical trials and available ethosomal formulations for the delivery of phytocomponents across stratum corneum.

Sustainable bio-based solid phase extraction adsorbent for the determination of various types of organic compounds.

A sustainable, bio-based, mesoporous material, Starbon A800, was explored for use as an adsorbent in solid phase extraction (SPE). A solution containing seven nitrosamines was first used as a standard to optimise conditions for extraction efficiency with Starbon A800. After optimising conditions, 25 compounds of varying polarity (terpenes, phenolics, pesticides, PAHs, amines, and nitrosamines) were extracted with SPE using either Starbon® A800, C18 or Porous Graphitic Carbon (PGC) as the adsorbent, for comparison purposes. At the same time, 3 different elution solvents (heptane, dichloromethane, and ethanol) were used for each type of adsorbent. Hansen solubility parameters can be used to choose an appropriate elution solvent for the selected SPE adsorbent. The best average SPE recoveries found for the 25 various compounds were 83%, 79%, and 65% using Starbon A800, PGC, and C18 adsorbents respectively and these had dichloromethane as the elution solvent. The identification and quantification of components was carried out using UV-visible spectroscopy, two-dimensional gas chromatography (GCxGC) with time of flight/mass spectrometry (TOF/MS) or a nitrogen chemiluminescence detector (NCD). The optimized method was successfully applied to extract volatile organic compounds from red wine and tap water using Starbon A800. Starbon A800 was shown to be a promising, low-cost, green, scalable, alternative adsorbent for the extraction of various types of organic compounds of a wide range of polarities using SPE.

Comprehensive characterization of organic compounds in indoor dust after generic sample preparation with SUPRAS and analysis by LC-HRMS/MS

In this study supramolecular solvents (SUPRAS) are employed for the first time to perform a wide screening of organic compounds in indoor dust samples. The potential of SUPRAS to efficiently extract a wide polarity range of compounds, and to simplify and improve the green properties of sample treatment in this area are discussed. SUPRAS made up of inverse aggregates of hexanol in tetrahydrofuran:water mixtures, which have been previously and successfully applied to the target determination of a variety of organic contaminants in different environmental matrices, were employed. Analysis was done with liquid chromatography and high resolution mass spectrometry. Twelve samples from public buildings (six educative buildings, two food stores, two nightclubs, one office and a coffee shop) were collected in South Spain. A total of 146 compounds were detected by target (∼33 %), suspect (∼55 %) and non-target screening (∼12 %). Around 86 % of all the compounds were identified (or tentatively identified) with levels of confidence equal or higher than 3. Novel designer drugs of abuse, unreported organophosphorus compounds and well-known organic contaminants, such as bisphenols, parabens, phthalates and flame retardants are reported. Differences with previous studies on wide screening of indoor dust reveal the influence of the employed databases for data processing and of the extraction method together with the different contamination profiles given by the sample location.

Flexible molecularly imprinted fiber library for the metabolic analysis of bisphenol F and ecological risk evaluation

Bisphenol F (BPF) has evoked global attentions due to its ubiquity and detrimental effects. Herein, a flexible molecularly imprinted fiber library was firstly proposed for the metabolic analysis of BPF in aquatic ecosystems. The library includes flexible single fibers and fiber arrays to precisely identify BPF and its metabolites with a wide range of polarities. Compared to commercial polyacrylate, the performance increased 11.56–570.98-fold. The adsorption capacity and the LogKow value were positively related. These arrays were used for the acquisition of environmental metabolomics data from aquatic ecosystems. In-depth data analysis showed that risk quotient was lower than 0.76, and bioaccumulation factor was lower than 2000 L/kg. Distribution concentration of BPF and its metabolites changed seasonally, and accumulation in sediment was much larger than that in surface water and hydrobionts. The risk is gradually increasing in sediment, but it does not reach high risk. The likelihood of bioaccumulation of parent compounds was greater than its metabolites. The library can be used in the metabolic diagnosis of pollutants with a broad range of polarities, providing a new method to acquire data for further ecological risk assessment, and offering a revolutionary strategy for environmental metabolomics investigation in aquatic ecosystems.

Non-Aqueous Poly(dimethylsiloxane) Organogel Sponges for Controlled Solvent Release: Synthesis, Characterization, and Application in the Cleaning of Artworks.

Polydimethylsiloxane (PDMS) organogel sponges were prepared and studied in order to understand the role of pore size in an elastomeric network on the ability to uptake and release organic solvents. PDMS organogel sponges have been produced according to sugar leaching techniques by adding two sugar templates of different forms and grain sizes (a sugar cube template and a powdered sugar template), in order to obtain materials differing in porosity, pore size distribution, and solvent absorption and liquid retention capability. These materials were compared to PDMS organogel slabs that do not contain pores. The sponges were characterized by Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and compared with PDMS slabs that do not contain pores. Scanning electron microscopy (SEM) provided information about their morphology. X-ray micro-tomography (XMT) allowed us to ascertain how the form of the sugar templating agent influences the porosity of the systems: when templated with sugar cubes, the porosity was 77% and the mean size of the pores was ca. 300 μm; when templated with powdered sugar, the porosity decreased to ca. 10% and the mean pore size was reduced to ca. 75 μm. These materials, porous organic polymers (POPs), can absorb many solvents in different proportions as a function of their polarity. Absorption capacity, as measured by swelling with eight solvents covering a wide range of polarities, was investigated. Rheology data established that solvent absorption did not have an appreciable impact on the gel-like properties of the sponges, suggesting their potential for applications in cultural heritage conservation. Application tests were conducted on the surfaces of two different lab mock-ups that simulate real painted works of art. They demonstrated further that PDMS sponges are a potential innovative support for controlled and selective cleaning of works of art surfaces.

Development of a column switching for direct online enrichment and separation of polar and nonpolar analytes from aqueous matrices

Trace substances in surface waters may threaten health and pose a risk for the aquatic environment. Moreover, separation and detection by instrumental analysis is challenging due to the low concentration and the wide range of polarities. Separation of polar and nonpolar analytes can be achieved by using stationary phases with different selectivity. Lower limits of detection of trace substances can be obtained by offline enrichment on solid phase materials. However, these practices require substantial effort and are time consuming and costly. Therefore, in this study, a column switching was developed to enrich and separate both polar and nonpolar analytes by an on-column large volume injection of aqueous samples. The column switching can significantly reduce the effort and time for analyzing trace substances without compromising on separation and detection. A reversed phase (RP) column is used to trap the nonpolar analytes. The polar analytes are enriched on a porous graphitized carbon column (PGC) coupled serially behind the RP column. A novel valve switching system is implemented to enable elution of the nonpolar analytes from the RP column and, subsequently, elution of polar analytes from the PGC column and separation on a hydrophilic interaction liquid chromatography (HILIC) column. To enable separation of polar analytes dissolved in an aqueous matrix by HILIC, the water plug that is flushed from the PGC column is diluted by dosing organic solvent directly upstream of the HILIC column. The developed method was tested by applying target analysis and non-target screening, highlighting the advantage to effectively separate and detect both polar and nonpolar compounds in a single chromatographic run. In the target analysis, the analytes, with a logD at pH 3 ranging from -2.8 to + 4.5, could be enriched and separated. Besides the 965 features in the RP phase, 572 features from real wastewater were observed in the HILIC phase which would otherwise elute in the void time in conventional one-dimensional RP methods.

Push-Pull Heptamethines Near the Cyanine Limit Exhibiting Large Quadratic Electro-Optic Effect.

Harnessing the quadratic electro-optic (QEO) of near-infrared polymethine chromophores over broad telecom wavelength bands is a subject of immense potential but remains largely under-investigated. Hereina series of push-pull heptamethines containing the tricyanofuran (TCF) acceptors and indoline or benzo[e]indoline donors are reported. These dipolar chromophores can attain a highly delocalized "cyanine-like" electronic ground state in solvents spanning a wide range of polarities, in some cases even closer to the ideal polymethine state than symmetrical cyanines.A transmission-mode electromodulation spectroscopy is used to study the electric-field-induced changes in optical absorption and refraction of polymer films doped with heptamethine chromophores, and large and thermally stable QEO effect with high efficiency-loss figure-of-merits that compare favorably to those from dipolar polyenes in poled or unpoled polymers and III-V semiconductors is obtained.The study opens a path for developing organic materials based on cyanine-like merocyanines for complementary metal oxide semiconductor -compatible, fast, efficient, and low-loss electro-optic modulation.

Triboelectric nanogenerator-coated blade spray mass spectrometry for volume-limited drug analysis

The demand for analytical tools for the analysis of low-concentration volume-limited samples has driven researchers to explore new analytical approaches. Mass spectrometry excels at trace analysis due to its high sensitivity and specificity, whereas ambient methods simplify, or completely eliminate sample preparation. Herein, we report a triboelectric nanogenerator-coated blade spray ambient mass spectrometry (TENG-CBS MS) method for the extraction, elution, and ionization of volume-limited, low-concentration small molecule drug samples with minimum sample preparation. Using a TENG device as the CBS power supply, we show it is possible to extract and analyze drug samples in a pulsed fashion at sub-nanogram to picogram levels with good stability and reproducibility. A wide range of analytes polarities were tested. Results indicated this method could also be useful for the analysis of low-level analytes in precious, volume limited samples in a simple single step.

Human Cerebrospinal Fluid Sample Preparation and Annotation for Integrated Lipidomics and Metabolomics Profiling Studies

Cerebrospinal fluid (CSF) is a metabolically diverse biofluid and a key specimen for exploring biochemical changes in neurodegenerative diseases. Detecting lipid species in CSF using mass spectrometry (MS)-based techniques remains challenging because lipids are highly complex in structure, and their concentrations span over a broad dynamic range. This work aimed to develop a robust lipidomics and metabolomics method based on commonly used two-phase extraction systems from human CSF samples. Prioritizing lipid detection, biphasic extraction methods, Folch, Bligh and Dyer (B&D), Matyash, and acidified Folch and B&D (aFolch and aB&D) were compared using 150 μL of human CSF samples for the simultaneous extraction of lipids and metabolites with a wide range of polarity. Multiple chromatographical separation approaches, including reversed-phase liquid chromatography (RPLC), hydrophilic interaction liquid chromatography (HILIC), and gas chromatography (GC), were utilized to characterize human CSF metabolome. The aB&D method was found as the most reproducible technique (RSD < 15%) for lipid extraction. The aB&D and B&D yielded the highest peak intensities for targeted lipid internal standards and displayed superior extracting power for major endogenous lipid classes. A total of 674 unique metabolites with a wide polarity range were annotated in CSF using, combining RPLC-MS/MS lipidomics (n = 219), HILIC-MS/MS (n = 304), and GC-quadrupole time of flight (QTOF) MS (n = 151). Overall, our findings show that the aB&D extraction method provided suitable lipid coverage, reproducibility, and extraction efficiency for global lipidomics profiling of human CSF samples. In combination with RPLC-MS/MS lipidomics, complementary screening approaches enabled a comprehensive metabolite signature that can be employed in an array of clinical studies.Graphical abstract