Wide-bandgap Perovskite Solar Cells Research Articles

Enhancement of Efficiency of Perovskite Solar Cells with Hole-Selective Layers of Rationally Designed Thiazolo[5,4-d]thiazole Derivatives.

We introduce thiazolo[5,4-d]thiazole (TT)-based derivatives featuring carbazole, phenothiazine, or triphenylamine donor units as hole-selective materials to enhance the performance of wide-bandgap perovskite solar cells (PSCs). The optoelectronic properties of the materials underwent thorough evaluation and were substantially fine-tuned through deliberate molecular design. Time-of-flight hole mobility TTs ranged from 4.33 × 10-5 to 1.63 × 10-3 cm2 V-1 s-1 (at an electric field of 1.6 × 105 V cm-1). Their ionization potentials ranged from -4.93 to -5.59 eV. Using density functional theory (DFT) calculations, it has been demonstrated that S0 → S1 transitions in TTs with carbazolyl or ditert-butyl-phenothiazinyl substituents are characterized by local excitation (LE). Mixed intramolecular charge transfer (ICT) and LE occurred for compounds containing ditert-butyl carbazolyl-, dimethoxy carbazolyl-, or alkoxy-substituted triphenylamino donor moieties. The selected derivatives of TT were used for the preparation of hole-selective layers (HSL) in PSC with the structure of glass/ITO/HSLs/Cs0.18FA0.82Pb(I0.8Br0.2)3/PEAI/PC61BM/BCP/Ag. The alkoxy-substituted triphenylamino containing TT (TTP-DPA) has been demonstrated to be an effective material for HSL. Its layer also functioned well as an interlayer, improving the surface of control HSL_2PACz (i.e., reducing the surface energy of 2PACz from 66.9 to 52.4 mN m-1), thus enabling precise control over perovskite growth energy level alignment and carrier extraction/transportation at the hole-selecting contact of PSCs. 2PACz/TTP-DPA-based devices showed an optimized performance of 19.1 and 37.0% under 1-sun and 3000 K LED (1000 lx) illuminations, respectively. These values represent improvements over those achieved by bare 2PACz-based devices, which attained efficiencies of 17.4 and 32.2%, respectively. These findings highlight the promising potential of TTs for the enhancement of the efficiencies of PSCs.

Efficient wide-bandgap perovskite solar cells with open-circuit voltage deficit below 0.4 V via hole-selective interface engineering

Efficient wide-bandgap perovskite solar cells with open-circuit voltage deficit below 0.4 V via hole-selective interface engineering

All-Round Passivation Strategy Yield Flexible Perovskite/CuInGaSe2 Tandem Solar Cells with Efficiency Exceeding 26.5.

The perovskite/Cu(InGa)Se2 (CIGS) tandem solar cells (TSCs) presents a compelling technological combination poised for the next generation of flexible and lightweight photovoltaic (PV) tandem devices, featuring a tunable bandgap, high power conversion efficiency (PCE), lightweight flexibility, and enhanced stability and durability. Over the years, the imperative to enhance the performance of wide bandgap (WBG) perovskite solar cells (PSCs) has grown significantly, particularly in the context of a flexible tandem device. In this study, an all-round passivation strategy known as Dual Passivation at Grains and Interfaces (DPGI) is introduced for WBG PSCs in perovskite/CIGS tandem structures. The implementation of DPGI is tailored to improve film crystallinity and passivate defects across the solar cell structure, leading to a substantial performance enhancement for WBG PSCs. Subsequently, both rigid and flexible tandem devices are assembled. Impressively, a fully flexible 4T perovskite/CIGS TSCs is successfully fabricated with a PCE of 26.57%, making it the highest value in this field and highlighting its potential applications in the next generation of flexible lightweight PV tandem devices.

π-π Stacking at the Perovskite/C60 Interface Enables High-Efficiency Wide-Bandgap Perovskite Solar Cells.

Interface passivation is a key method for improving the efficiency of perovskite solar cells, and 2D/3D perovskite heterojunction is the mainstream passivation strategy. However, the passivation layer also produces a new interface between 2D perovskite and fullerene (C60), and the properties of this interface have received little attention before. Here, the underlying properties of the 2D perovskite/C60 interface by taking the 2D TEA2PbX4 (TEA=C6H10NS; X=I, Br, Cl) passivator as an example are systematically expounded. It is found that the 2D perovskite preferentially exhibits (002) orientation with the outermost surface featuring an oriented arrangement of TEACl, where the thiophene groups face outward. The outward thiophene groups further form a strong π-π stacking system with C60 molecule, strengthening the interaction force with C60 and facilitating the creation of a superior interface. Based on the vacuum-assisted blade coating, wide-bandgap (WBG, 1.77eV) perovskite solar cells achieved impressive records of 19.28% (0.09cm2) and 18.08% (1.0cm2) inefficiency, respectively. This research not only provides a new understanding of interface processing for future perovskite solar cells but also lays a solid foundation for realizing efficient large-area devices.

Delaying crystallization and anchoring the grain boundaries defects via π-π stacked molecules for efficient and stable wide-bandgap perovskite solar cells

Owing to the easy migration of halogen ions in wide-bandgap perovskite, it will lead to the formation of a large number of uncoordinated Pb2+ to form deep-level defects, which seriously affects the power conversion efficiency (PCE) and stability of wide-bandgap perovskite solar cells (PSCs). The introduction of additives has been recognized as an effective method to improve these defects, especially Lewis acid-base additives. Herein, Lewis base molecule dibenzofuran (DBF) with π-conjugated system, which can form π-π stacked dimer, is used as a perovskite additive. The detailed crystallization process of perovskite main precursor triggered by DBF is measured by using laser scanning confocal microscopy. It is demonstrated that the addition of DBF in perovskite samples resulted in a deceleration of the crystallization process, which is due to the formation of Lewis acid-base complexes between DBF π-π stacked dimer and perovskite, which can obtain perovskite films with reduced defect density. As a result, the champion PCE of the wide-bandgap (1.68 eV) perovskite device reaches 20.18 %, significantly higher than the control device (17.79 %). Additionally, the device with no encapsulation demonstrates better stability, as it maintains over 90 % of the initial PCE under an air environment with 30–40 % relative humidity (RH) and 25 °C for 1200 h.

Tail states suppression via surface-modification of wide-bandgap perovskites for high-efficiency all-perovskite photovoltaic tandems

As an essential light-absorbing material in perovskite-based tandem solar cells, wide-bandgap (WBG) perovskite has garnered extensive attention. Nevertheless, due to severe non-radiative recombination from tail states, as well as photoinduced phase segregation and unoptimized charge transfer, WBG perovskite solar cells (PSCs) typically display significant open-circuit voltage (VOC) loss and low fill factor (FF). In this work, we report to modify the 1.68 eV WBG perovskite film upon optimized surface passivation with 1,3-propane-diammonium iodide (PDAI2). Time-resolved microwave conductivity measurement is employed to analyze the tail states, mobilities of charge carriers and the rate constants of recombination in perovskite films. The results indicate that the optimized surface modification strategy not only enhances film quality, boosts carrier transport, but also suppresses tail states and therefore diminishes non-radiative recombination, consequently elevating the VOC and FF of the device. Hence, the PDAI2-assisted WBG PSCs deliver an optimal efficiency of 21.48 %, accompanied by a VOC of 1.243 V. Furthermore, the integration of a narrow-bandgap tin–lead PSC with a semi-transparent WBG PSC results in a four-terminal perovskite/perovskite tandem solar cell, showcasing an efficiency surpassing 28 %. Our research offers a practical approach for producing efficient WBG PSCs and tandem solar cells.

Functionalized wide-bandgap photoanode via dimensional design using amine fluoride salt to maximize the performance of perovskite solar cells

For Wide-bandgap (WBG) perovskite solar cells (PSCs), severe open-circuit voltage loss (Vloss) and device stability limit its photovoltaic performance. Dimensional design has been considered as a potential way to construct more efficient perovskite photoanodes. Herein, this article introduces 3-(trifluoromethyl) phenethylamine hydroiodide (CF3PEAI) to form dimensionally graded perovskite film was fabricated with 2D (two dimensional) CF3PEA2PbI4 forming on the 3D(three dimensional) perovskite layer. Studies have found that the deposited 2D perovskite can effectively regulate the energy level with minimized mismatch. Besides the functional groups in CF3PEAI can deactivate varieties of traps in perovskite through various interactions such as coordination of I- with Pb2+, hydrogen bonding of CF3 with formamidine, and ionic interactions of NH3+ with lead halide anions, thereby reducing the charge carrier recombination at the interface, and promoting the hole transfer from perovskite to Spiro-OMeTAD. Consequently, the resulting WBG perovskite(1.75 eV) system obtained a high open-circuit voltage of 1.29 V, with power conversion efficiency (PCE) increased from 16.12% to 18.70%. In addition, the wet stability of the WBG PSCs is significantly improved due to the fluorination effect of 2D perovskite for isolating water and oxygen.

Defect passivation and carrier management via a multifunctional additive for efficient and stable wide-bandgap perovskite solar cells with high fill factor

Wide-bandgap (WBG) Methylammonium (MA)-free based perovskite solar cells (PSCs) have attracted widespread research interests due to their broad applicability in multijunction tandem. Nevertheless, the efficiency of WBG PSCs is restricted by unfulfilled potential in fill factor and large deficits in open-circuit voltage. The imbalanced carrier mobility not only plays a critical role in bulk non-radiative recombination loss but also hinders efficient charge collection for mixed I/Br WBG perovskites. Herein, we introduced additive named 2,8-Diiododibenzothiophene to overcome above issues. Inverted devices with enhanced photostability and a record fill factor of 85.7 % are demonstrated. Moreover, combining the semitransparent WBG PSCs with 1.25 eV-bandgap perovskite bottom cells, we realized 4-terminal tandem devices and a champion PCE of 28 % is achieved. The multifunctional additive strategy demonstrated here, will open new avenues for improving WBG PSCs’ performance.

Surface Crystallization Enhancement and Defect Passivation for Efficiency and Stability Enhancement of Inverted Wide-Bandgap Perovskite Solar Cells.

Wide-bandgap (WBG) inverted perovskite solar cells (PSCs) are used as the top cell for tandem solar cells, which is an effective way to outperform the Shockley-Queisser limit. However, the low efficiency and poor phase stability still seriously restrict the application of WBG inverted PSCs. Here, the surface of the WBG perovskite film was passivated by the synthesized 1,2,4-tris(3-thienyl)benzene (THB). The THB size well matches with the halogen ion vacancy on the perovskite surface, and the S atom in THB can strongly interact with Pb2+ on the surface of the WBG perovskite film to the greatest extent, which effectively passivates surface defects and suppresses the recombination of carriers caused by these defects. At the same time, the S atom in THB occupied the migration site of the halogen ions, which inhibits the migration of halogen ions. Due to the strong conjugation effect and stability of THB, it can be locked on the surface of perovskite to increase the lattice strength and inhibit the segregation of photoinduced halide, thus improving the performance and operational stability of PSCs. The THB-modified WBG (Eg = 1.71 eV) PSC achieves a maximum power conversion efficiency of 20.75%, and its 99.0% is retained after 1512 h at a relative humidity of 10-25%. Under the irradiation of 1000 lx LED light, the indoor power conversion efficiency of the THB-modified WBG PSC reaches 34.15%.

Enhancing Efficiency of Large-Area Wide-Bandgap Perovskite Solar Modules with Spontaneously Formed Self-Assembled Monolayer Interfaces.

Wide-bandgap (WBG) perovskites play a crucial role in perovskite-based tandem cells. Despite recent advances using self-assembled monolayers (SAMs) to facilitate efficiency breakthroughs, achieving precise control over the deposition of such ultrathin layers remains a significant challenge for large-scale fabrication of WBG perovskite and, consequently, for the tandem modules. To address these challenges, we propose a facile method that integrates MeO-2PACz and Me-4PACz in optimal proportions (Mixed SAMs) into the perovskite precursor solution, enabling the simultaneous codeposition of WBG perovskite and SAMs. This technique promotes the spontaneous formation of charge-selective contacts while reducing defect densities by coordinating phosphonic acid groups with the unbonded Pb2+ ions at the bottom interface. The resulting WBG perovskite solar cells (PSCs) demonstrated a power conversion efficiency of 19.31% for small-area devices (0.0585 cm2) and 17.63% for large-area modules (19.34 cm2), highlighting the potential of this codeposition strategy for fabricating high-performance, large-area WBG PSCs with enhanced reproducibility. These findings offer valuable insights for advancing WBG PSCs and the scalable fabrication of modules.

Role of Trapped Carriers Dynamics in Operating Lead Halide Wide-Bandgap Perovskite Solar Cells

Role of Trapped Carriers Dynamics in Operating Lead Halide Wide-Bandgap Perovskite Solar Cells

Anti-Solvent-Free Preparation for Efficient and Photostable Pure-Iodide Wide-Bandgap Perovskite Solar Cells.

The perovskite/silicon tandem solar cell (TSC) has attracted tremendous attention due to its potential to breakthrough the theoretical efficiency set for single-junction solar cells. However, the perovskite solar cell (PSC) designed as its top component cell suffers from severe photo-induced halide segregation owing to its mixed-halide strategy for achieving desirable wide-bandgap (1.68 eV). Developing pure-iodide wide-bandgap perovskites is a promising route to fabricate photostable perovskite/silicon TSCs. Here, we report efficient and photostable pure-iodide wide-bandgap PSCs made from an anti-solvent-free (ASF) technique. The ASF process is achieved by mixing two precursor solutions, both of which are capable of depositing corresponding perovskite films without involving anti-solvent. The mixed solution finally forms Cs0.3DMA0.2MA0.5PbI3 perovskite film with a bandgap of 1.68 eV. Furthermore, methylammonium chloride additive is applied to enhance the crystallinity and reduce the trap density of perovskite films. As a result, the pure-iodide wide-bandgap PSC delivers efficiency as high as 21.30 % with excellent photostability, the highest for this type of solar cells. The ASF method significantly improves the device reproducibility as compared with devices made from other anti-solvent methods. Our findings provide a novel recipe to prepare efficient and photostable wide-bandgap PSCs.

Intermediate Phase Suppression with Long Chain Diammonium Alkane for High Performance Wide-Bandgap and Tandem Perovskite Solar Cells.

Wide bandgap (WBG) perovskite can construct tandem cells with narrow bandgap solar cells by adjusting the band gap to overcome the Shockley-Queisser limitation of single junction perovskite solar cells (PSCs). However, WBG perovskites still suffer from severe nonradiative carrier recombination and large open-circuit voltage loss. Here, this work uses an in situ photoluminescence (PL) measurement to monitor the intermediate phase evolution and crystallization process via blade coating. This work reports a strategy to fabricate efficient and stable WBG perovskite solar cells through doping a long carbon chain molecule octane-1,8-diamine dihydroiodide (ODADI). It is found that ODADI doping not only suppresses intermediate phases but also promote the crystallization of perovskite and passivate defects in blade coated 1.67eV WBG FA0.7 Cs0.25 MA0.05 Pb(I0.8 Br0.2 )3 perovskite films. As a result, the champion single junction inverted PSCs deliver the efficiencies of 22.06% and 19.63% for the active area of 0.07 and 1.02 cm2 , respectively, which are the highest power conversion efficiencies (PCEs) in WBG PSCs by blade coating. The unencapsulated device demonstrates excellent stability in air, which maintains its initial efficiency at the maximum power points under constant AM 1.5G illumination in open air for nearly 500h. The resulting semitransparent WBG device delivers a high PCE of 20.06%, and the 4-terminal all-perovskite tandem device delivers a PCE of 28.35%.

Suppressed Phase Segregation with Small A-Site and Large X-Site Incorporation for Photostable Wide-Bandgap Perovskite Solar Cells.

Wide-bandgap (WBG) perovskite solar cells (PSCs) have been widely used as the top cell of tandem solar cells. However, photoinduced phase segregation and high open-circuit voltage loss pose significant obstacles to the development of WBG PSCs. Here, a two-step small-size A-site and large-size X-site incorporation strategy is reported to modulate the lattice distortion and improve the film quality of WBG formamidinium-methylammonium (FAMA) perovskite films for photostable PSCs based on two-step deposition method. First, CsI with content of 0-20% is introduced to tune the lattice distortion and film quality of FAMA perovskite with a bandgap of 1.70eV. Then, 4% RbI is incorporated to further modulate the perovskite growth and lattice distortion, leading to the suppression of photoinduced phase segregation in the resultant RbCsFAMA quadruple cation perovskites. As a result, the 20%CsI/4%RbI-doped device obtains a promising efficiency of 20.6%, and the corresponding perovskite film shows good photothermal stability. Even without encapsulation, the device can maintain 92% of its initial efficiency after 1000 h of continuous operation under 1 sun equivalent white light-emitting diode illumination.

Room-temperature processed plasma activated nickel oxide film for wide-bandgap perovskite solar cells

The nickel oxide (NiOx) film is often employed as a hole transport layer for the production of high-performance inverted perovskite solar cells due to its exceptional chemical stability, high hole mobility, and matching energy level structure. Among various techniques for preparing NiOx, E-beam evaporation-based NiOx films show great promise owing to their low fabrication temperature and excellent photoelectric properties. Herein, an ion bombardment source was used to generate oxygen plasma through the bombardment of oxygen molecules, which subsequently oxidized the non-stoichiometric NiOx. Experimental findings demonstrate that this method substantially enhances the electrical and optical properties of the NiOx film. We utilized a room-temperature-processed NiOx film as a hole transport layer to fabricate inverted wide-bandgap perovskite solar cells, resulting in a champion device efficiency of 17.82%. It is anticipated that the NiOx films produced via this approach will be widely adopted in the industrialization of perovskite solar cells.

Dual interface strategies enable efficient wide bandgap perovskite solar cells

High performance wide bandgap perovskite solar cells (WB-PSCs) have found widespread applications in tandem solar cells. In WB-PSCs, achieving a high conversion efficiency relies on the effective utilization of light absorption and minimization of electronic defects. In this work, electronic defects at the surface and grain boundaries of perovskite materials have been passivated by n-butylammonium bromide (BABr) to suppress carrier non-radiative recombination. Confirmed through x-ray powder diffraction and x-ray photoelectron spectroscopy spectra, ultra-thin two-dimensional (2D) perovskite layers were successfully generated on a perovskite surface. The BABr-treated devices exhibited an increased fill factor and open circuit voltage (VOC) compared to the references. Furthermore, a nanotextured electrode with a roughness of 22.98 nm was employed to trap light. The nanotextured buried interface not only promoted light utilization but also alleviated residual stress and micro-strain in the perovskite film compared to the smooth substrate. Finally, the champion WB-PSC achieved a power conversion efficiency of 20.46% in the reverse scan. These findings pave a promising path for the development of solution-processed perovskite films on nanotextured silicon substrates to improve the performance of monolithic tandem solar cells.

Suppressing Halide Segregation via Pyridine-Derivative Isomers Enables Efficient 1.68 eV Bandgap Perovskite Solar Cells.

Light-induced phase segregation is one of the main issues restricting the efficiency and stability of wide-bandgap perovskite solar cells (WBG PSCs). Small organic molecules with abundant functional groups can passivate various defects, and therefore suppress the ionic migration channels for phase segregation. Herein, a series of pyridine-derivative isomers containing amino and carboxyl are applied to modify the perovskite surface. The amino, carboxyl, and N-terminal of pyridine in all of these molecules can interact with undercoordinated Pb2+ through coordination bonds and suppress halide ions migration via hydrogen bonding. Among them, the 5-amino-3-pyridine carboxyl acid (APA-3) treated devices win the champion performance, enabling an efficiency of 22.35% (certified 22.17%) using the 1.68 eV perovskite, which represents one of the highest values for WBG-PSCs. This is believed to be due to the more symmetric spatial distribution of the three functional groups of APA-3, which provides a better passivation effect independent of the molecular arrangement orientation. Therefore, the APA-3 passivated perovskite shows the slightest halide segregation, the lowest defect density, and the least nonradiative recombination. Moreover, the APA-3 passivated device retains 90% of the initial efficiency after 985 h of operation at the maximum power point, representing the robust durability of WBG-PSCs under working conditions.

Interface engineering of inverted wide-bandgap perovskite solar cells for tandem photovoltaics

Interface engineering of inverted wide-bandgap perovskite solar cells for tandem photovoltaics

Strain Regulation of Mixed-Halide Perovskites Enables High-Performance Wide-Bandgap Photovoltaics.

Wide-bandgap mixed-halogen perovskite materials are widely used as top cells in tandem solar cells. However, serious open-circuit voltage (Voc ) loss restricts the power conversion efficiency (PCE) of wide-bandgap perovskite solar cells (PSCs). Herein, it is shown that the resulting methylammonium vacancies induce lattice distortion in methylammonium chloride-assisted perovskite film, resulting in an inhomogeneous halogen distribution and low Voc . Thus, a lattice strain regulation strategy is reported to fabricate high-performance wide-bandgap PSCs. Rubidium (Rb) cations are introduced to fill the A-site vacancy caused by the methylammonium volatilization, which alleviates shrinkage strain of the perovskite crystal. The reduced lattice distortion and increased halide ion migration barrier result in a homogeneous mixed-halide perovskite film. Due to improved carrier transport and suppressed nonradiative recombination, the Rb-treated wide-bandgap PSC (1.68eV) achieves an excellent PCE of 21.72%, accompanied by a high Voc of 1.22V. The resulting device maintains more than 90% of its initial PCE after 1500h under 1-sun illumination conditions.

Surface heterojunction based on n-type low-dimensional perovskite film for highly efficient perovskite tandem solar cells.

Enhancing the quality of junctions is crucial for optimizing carrier extraction and suppressing recombination in semiconductor devices. In recent years, metal halide perovskite has emerged as the most promising next-generation material for optoelectronic devices. However, the construction of high-quality perovskite junctions, as well as characterization and understanding of their carrier polarity and density, remains a challenge. In this study, using combined electrical and spectroscopic characterization techniques, we investigate the doping characteristics of perovskite films by remote molecules, which is corroborated by our theoretical simulations indicating Schottky defects consisting of double ions as effective charge dopants. Through a post-treatment process involving a combination of biammonium and monoammonium molecules, we create a surface layer of n-type low-dimensional perovskite. This surface layer forms a heterojunction with the underlying 3D perovskite film, resulting in a favorable doping profile that enhances carrier extraction. The fabricated device exhibits an outstanding open-circuit voltage (VOC) up to 1.34V and achieves a certified efficiency of 19.31% for single-junction wide-bandgap (1.77eV) perovskite solar cells, together with significantly enhanced operational stability, thanks to the improved separation of carriers. Furthermore, we demonstrate the potential of this wide-bandgap device by achieving a certified efficiency of 27.04% and a VOC of 2.12V in a perovskite/perovskite tandem solar cell configuration.