White Mineral Trioxide Aggregate Research Articles

Pulp regeneration treatment using different bioactive materials in permanent teeth of pediatric subjects

Background and Objectives: The present systematic review aims to assess the success rate of the pulp regeneration treatment, according to the American Association of Endodontists (AAE) criteria, using different bioactive materials in permanent teeth of pediatric subjects (6–17 years of age). Materials and Methods: The study protocol was registered on PROSPERO and adhered to the Preferred Reporting Items for Systematic Reviews and Meta-analyses statement. The question formulation was accomplished using the PICO model, and an electronic search was carried out on Scopus, MEDLINE/PubMed, Web of Science, and Cochrane databases till April 1, 2023. A total of 30 studies were established to fulfill the inclusion criteria of this systematic review. Results: A total of 273 teeth have been treated with pulp regeneration treatment. By comparing different biomaterials and the success criteria defined by the AAE, the material associated with a higher success rate was found to be the white mineral trioxide aggregate. However, the overall success rate of pulp regeneration treatment was reported for 248 out of 273 teeth (91.20%). Conclusions: Data obtained support the potential that regenerative endodontics aids in continuing root development in permanent immature teeth. Further studies are needed for a more extensive evaluation of the use of different biomaterials and the success rate in regenerative endodontics.

SOLUBILITY AND BIOMINERALIZATION ABILITY OF PMMA BONE CEMENT NANOCOMPOSITE FILLED WITH 40% NANOHYDROXYAPATITE FOR USE AS ROOT-END FILLING MATERIAL

Aim: This study was conducted to compare and evaluate the solubility and biomineralization ability of polymethyl-methacylate bone cement filled with prepared calcium phosphate based nano-fillers versus mineral trioxide aggregate when used as root end filling material. Materials and Methods: A total of forty two samples were prepared and classified into three main groups(n=14)according to the material type: Group I: white mineral trioxide aggregate, Group II: Polymethyl-methacrylate bone cement and Group III: Polymethyl-methacrylate bone cement loaded with 40% of prepared calcium phosphate based nanofillers. Each material type was mixed and packed into molds. Solubility testing was done following the ISO specification #4049 (2009). For the biomineralization ability testing, each specimen was immersed in 150 ml of simulated body fluid for 21 days. After that, the surface of the cements was analyzed by scanning electron microscope and energy dispersive X-ray analysis with computer-controlled software for elemental analysis. Results: Energy dispersive X-ray analysis results revealed the absence of both calcium and phosphorus elements in polymethyl-methacrylate bone cement samples. On the other hand, both calcium and phosphorus elements were present in the other two tested materials samples. Statistical analysis revealed a statistically significant difference between the tested groups (p<0.05). Regarding solubility, MTA (GroupI) was significantly the lowest having mean value of (0.010g/mm3), while Bone cement with nanofiller (group III) was significantly the highest having mean value (1.009 g/mm3). Conclusion: Within the limitations of the present study, it can be concluded that addition of nanohydroxyapatite to polymethyle-methacrylate bone cement enhanced its biomineralization ability to be capable of apatite formation and on the other hand, it increased its solubility.

Discoloration after revascularization using calcium phosphosilicate-based bioceramic versus mineral trioxide aggregate in necrotic immature permanent anterior teeth: A Randomized clinical trial.

The aim of the current study is to evaluate the effect of calcium phophosilicate-based bioceramic "Totalfill bioceramic putty" and white mineral trioxide aggregate (WMTA) as the coronal plug on discoloration after revascularization of necrotic immature permanent anterior teeth. This study was conducted on (48) necrotic young permanent central incisors in children ranging from 8 to 14 years old, that were randomly allocated to either Totalfill bioceramic (Group I = 24) or WMTA (Group II = 24) as the coronal plug. Two visits revascularization protocol was adopted in this study using 1.5% sodium hypochlorite, followed by 17% ethylenediaminetetraacetic acid, and ending with a saline flush as irrigation solution. The double antibiotic paste was used as intracanal medication. The blood clot was used as scaffold followed by the application of collagen membrane followed by coronal plud malterial. Finally, the access was sealed using resin composite restoration and composite restoration. Clinical assessment was conducted at 1, 3, 6, 9, and 12 months, while radiographic assessment was conducted at 6 and 12 months. Data were statistically analyzed using the Chi-squared test for intergroup comparisons and Cochran's Q test for intragroup comparison. Clinically, Group I exhibited a success rate of 100%, whereas Group II exhibited a success rate of 85.7%. Radiographically, both materials showed a 90.5% success rate. There was no statistically significant difference between both materials for all assessed clinical and radiographic parameters at different follow-up periods. Both Totalfill bioceramic putty and WMTA can be used successfully as coronal plug in esthetic areas.

Evaluation of the Marginal Adaptation of Two Hydraulic Calcium Silicate Cements Used in Apical Plugs: An In Vitro Study

Background: The emergence of new hydraulic calcium silicate cements has revolutionized endodontics, addressing the limitations of mineral trioxide aggregate (MTA). The aim of this study is to assess and compare the marginal adaptation of two calcium silicate-based cements (White ProRoot MTA® and TotalFill® BC RRM Fast Set PuttyTM), when creating apical plugs for teeth with open apices. Methods: twenty-four single-rooted teeth were divided into two groups—GMTA (plug with MTA®) and GTBC (plug with TotalFill® BC RRM Fast Set PuttyTM)—and were sectioned at 1 mm and 2 mm from the apex. The transverse sections were analyzed with scanning electron microscopy and the marginal adaptation of the cements was measured with ImageJ® 1.3 software. Statistical analysis (IBM® SPSS® statistics software version 27) was performed and statistical significance was set at 0.05 (p < 0.05). Results: There was a significant difference in the apical region, favoring White ProRoot MTA®, with a lower percentage of marginal adaptation failure (1.32 ± 4.47), presenting a statistically significant difference in the apical region (p = 0.029) but not in the cervical region of the apical plugs (p = 0.774). Conclusions: White ProRoot MTA® showed superior marginal adaptation in the apical section compared to TotalFill® BC RRM Fast Set PuttyTM.

Effect of Incorporating Titanium Dioxide Nanoparticles into White Portland Cement, White Mineral Trioxide Aggregate, and Calcium Enriched Mixture Cement on the Push-out Bond Strength to Furcal Area Dentin.

Bond strength of furcation repair materials is an essential factor in clinical success. Studies on the effect of adding titanium dioxide (TiO2) nanoparticles on the push-out bond strength of commonly used endodontic cements for furcation perforation repair is limited. This study aimed to evaluate the effect of adding TiO2 nanoparticles to white Portland cement (PC), white mineral trioxide aggregate (MTA), and calcium enriched mixture cement (CEM) on their push-out bond strengths. In this in vitro study, 120 endodontically treated molars were assigned to six groups (n=20) based on the material used to repair the perforation. In three groups, the cements (white PC, white MTA, and CEM) were placed in pure form, and in the three remaining groups, 1 weight % of TiO2 was added. The push-out bond strength was measured using a universal testing machine at a strain rate of 0.5 mm/min. Data were analyzed using one-way ANOVA and post hoc Games-Howell test (p< 0.05). One-way ANOVA showed significant differences in the mean bond strength values between the six groups (p= 0.002). The post hoc Games-Howell test showed that the bond strengths in MTA+TiO2 and PC+TiO2 groups were significantly higher than those in MTA and PC groups, respectively. However, there was no significant difference in the bond strength between CEM and CEM+ TiO2 groups. The incorporation of TiO2 into MTA and PC increased their push-out bond strength. However, it did not affect the push-out bond strength of CEM cement.

Comparative Evaluation of the Physical and Antimicrobial Properties of Mineral Trioxide Aggregate, Biodentine, and a Modified Fast-Setting Mineral Trioxide Aggregate Without Tricalcium Aluminate: An In Vitro Study.

Background Tricalcium aluminate, one of the major constituents of mineral trioxide aggregate (MTA), has been shown to have cytotoxic properties. Mineral trioxide aggregate has moderate to low antimicrobial activity against the most common endodontic pathogen, Enterococcus faecalis. Aim To assess the physical and antimicrobial properties of a newly modified formulation of mineral trioxide aggregate. Materials & methods The final setting time, compressive strength, and antimicrobial properties were tested for three groups of materials. The material used for Group 1 was mineral trioxide aggregate (white MTA, Angelus, Londrina, Brazil); the material for Group 2 was Biodentine (Septodont, Saint Maur des Fossés, France); and for Group 3, a modified MTA formulation was used. Results Group 1 had the longest setting time, and Group 2 had the shortest setting time. Group 3's material was set at 83.65 ± 0.28 minutes. This difference among the groups was statistically significant (p < 0.05). The highest mean compressive strength during all the time periods was seen in Group 2, followed by Group 3, and the least in Group 1. This difference in compressive strength was statistically significant (p=0.001). The largest zone of inhibition against Enterococcus faecalis, Candida albicans, and Streptococcus mutans was seen in Group 3, followed by Group 2 and Group 1. Conclusion Under the limitations of the present study, the newly modified MTA could serve as an alternative to the conventional MTA in terms of faster setting, higher strength, and better antimicrobial properties.

Spectrophotometric Analysis of Coronal Discoloration In Vitro Induced by Bioceramic Cements.

The aim of this study was to evaluate and quantify, in vitro, the extent of coronal discoloration induced by bioceramic materials over time. In total, 44 human monoradicular teeth were divided into four groups (n = 11), according to the applied material: Negative control (NC); White MTA ProRoot® (WMTAP); Biodentine™ (BD); and TotalFill® BC RRM™ Putty (TF). Teeth were immersed in saline solution and incubated at 37 °C; the following periods of time were defined: before incubation: [t0]-without bioceramic material, t1-immediately after the bioceramic material placement; after incubation: t24h-24 h, t7d-7 days, and 30d-30 days. Descriptive and inferential statistical analysis were performed. Cochran's Q test was used to evaluate coronal discoloration across the different groups, while the Kruskal-Wallis test was employed to determine differences in discoloration among the groups at each time interval. Additionally, the Friedman test was applied to analyze the variations in discoloration within each group over time. A significance level of 5% was set. All experimental groups revealed coronal discoloration over time: NC (p = 0.001), WMTAP (p < 0.001), BD (p = 0.001), and TF (p = 0.006). No significant differences were observed between groups for each time interval (p > 0.05). The WMTAP group varied the most considering the intervals [t0-t1] and [t24h-t7d] (p = 0.037) compared to the remaining experimental groups.

Effect of Different Irrigation Activation and Condensation Techniques on the Marginal Adaptation of White MTA

Effect of Different Irrigation Activation and Condensation Techniques on the Marginal Adaptation of White MTA

Clinical and radiographic evaluation of NeoMTA versus conventional white mineral trioxide aggregate in revascularization of non-vital immature permanent anterior teeth (A randomized controlled trial)

ObjectiveTo evaluate and compare clinically and radiographically the effect of using two different coronal plug materials (NeoMTA versus Conventional White mineral trioxide aggregate) in revascularization of non-vital immature permanent anterior teeth, with special reference to the assessment and evaluation of discoloration potential over a period of one year.MethodsRevascularization procedure was performed in (30) immature permanent non-vital anterior teeth which were randomly allocated to two equal groups (n = 15). NeoMTA was used as coronal plug material in the Experimental Group (N), while conventional White mineral trioxide aggregate (WMTA) was used as a coronal plug material in the Control Group (W). All treated teeth were evaluated clinically at 1 week, 1, 3, and 12 months and radiographically at 12 months.ResultsThe overall clinical and radiographic success rate of Groups (N) and (W) at the end of the 12-month follow-up period was 100%. The discoloration was detected in a single tooth (9.1%) in Group (N) and three teeth (27.3%) in Group (W) but the difference between groups was not statistically significant.ConclusionsBoth NeoMTA and conventional WMTA were successful coronal plug materials in the revascularization of non-vital immature permanent teeth achieving a high level of clinical and radiographic success. NeoMTA is a promising coronal plug material that can be used for revascularization procedures in the esthetic zone as it showed less discoloration potential compared with conventional WMTA, however, there was no statistically significant difference between both materials.

Effect of Intracoronal Sealing Biomaterials on the Histological Outcome of Endodontic Revitalisation in Immature Sheep Teeth—A Pilot Study

The influence of intracoronal sealing biomaterials on the newly formed regenerative tissue after endodontic revitalisation therapy remains unexplored. The objective of this study was to compare the gene expression profiles of two different tricalcium silicate-based biomaterials alongside the histological outcomes of endodontic revitalisation therapy in immature sheep teeth. The messenger RNA expression of TGF-β, BMP2, BGLAP, VEGFA, WNT5A, MMP1, TNF-α and SMAD6 was evaluated after 1 day with qRT-PCR. For evaluation of histological outcomes, revitalisation therapy was performed using Biodentine (n = 4) or ProRoot white mineral trioxide aggregate (WMTA) (n = 4) in immature sheep according to the European Society of Endodontology position statement. After 6 months' follow-up, one tooth in the Biodentine group was lost to avulsion. Histologically, extent of inflammation, presence or absence of tissue with cellularity and vascularity inside the pulp space, area of tissue with cellularity and vascularity, length of odontoblast lining attached to the dentinal wall, number and area of blood vessels and area of empty root canal space were measured by two independent investigators. All continuous data were subjected to statistical analysis using Wilcoxon matched-pairs signed rank test at a significance level of p < 0.05. Biodentine and ProRoot WMTA upregulated the genes responsible for odontoblast differentiation, mineralisation and angiogenesis. Biodentine induced the formation of a significantly larger area of neoformed tissue with cellularity, vascularity and increased length of odontoblast lining attached to the dentinal walls compared to ProRoot WMTA (p < 0.05), but future studies with larger sample size and adequate power as estimated by the results of this pilot study would confirm the effect of intracoronal sealing biomaterials on the histological outcome of endodontic revitalisation.

In Vivo Assessment of the Apatite-Forming Ability of New-Generation Hydraulic Calcium Silicate Cements Using a Rat Subcutaneous Implantation Model.

Hydroxyapatite formation on endodontic hydraulic calcium silicate cements (HCSCs) plays a significant role in sealing the root canal system and elevating the hard-tissue inductivity of the materials. This study evaluated the in vivo apatite-forming ability of 13 new-generation HCSCs using an original HCSC (white ProRoot MTA: PR) as a positive control. The HCSCs were loaded into polytetrafluoroethylene tubes and implanted in the subcutaneous tissue of 4-week-old male Wistar rats. At 28 days after implantation, hydroxyapatite formation on the HCSC implants was assessed with micro-Raman spectroscopy, surface ultrastructural and elemental characterization, and elemental mapping of the material-tissue interface. Seven new-generation HCSCs and PR had a Raman band for hydroxyapatite (v1 PO43- band at 960 cm-1) and hydroxyapatite-like calcium-phosphorus-rich spherical precipitates on the surfaces. The other six HCSCs with neither the hydroxyapatite Raman band nor hydroxyapatite-like spherical precipitates did not show calcium-phosphorus-rich hydroxyapatite-layer-like regions in the elemental mapping. These results indicated that 6 of the 13 new-generation HCSCs possessed little or no ability to produce hydroxyapatite in vivo, unlike PR. The weak in vivo apatite-forming ability of the six HCSCs may have a negative impact on their clinical performance.

Effect of different root canal irrigants on push-out bond strength of two novel root-end filling materials

BackgroundThe aim of this in vitro study was to evaluate push-out bond strength of different root-end filling materials using various irrigant solutions.MethodsA push-out bond strength test was performed to evaluate the bond strength of two experimental root-end filling materials: namely, nano-hybrid mineral trioxide aggregate (MTA) and polymethyl methacrylate (PMMA) cement filled with 20% weight nano hydroxyapatite (nHA) fillers compared to conventional MTA. The irrigant solutions employed were sodium hypochlorite (NaOCl) in concentrations 1%, 2.5% and 5.25% and 2% chlorhexidine gluconate (CHX) followed by application of 17% ethylene diamine tetra-acetic acid (EDTA). A freshly extracted sixty single-rooted human maxillary central incisors were used. The crowns were removed, the canal apex was widened to simulate immature teeth. Each type of irrigation protocols was performed. After application and setting of the root-end filling materials, a slice of one mm thickness was cut transversely from the apical end of each root. Specimens were stored for 1 month in artificial saliva and were subjected to a push-out test to evaluate the shear bond strength. Data were analyzed using two-way ANOVA and Tukey test.ResultsThe experimental nano-hybrid MTA showed the highest significant push-out bond strength values when irrigated by NaOCl at several concentrations (1%, 2.5% and 5.25%) (P< 0.05). Meanwhile, irrigation with 2% CHX resulted in highest bond strength values in nano-hybrid white MTA (18 MPa) and PMMA filled with 20% weight nHA (17.4 MPa) with nonsignificant difference between them (p = 0.25). In each root-end filling material, irrigation with 2% CHX led to the highest significant bond strength, followed by NaOCl 1%, while the least significant bond strength was produced after irrigation with NaOCl 2.5% and 5.25% (P< 0.05).ConclusionConsidering the limitations of this study, it may be concluded that the application of 2% CXH and 17% EDTA provides superior push-out bond strength to root canal dentin compared with irrigation with NaOCl irrigants and 17% EDTA, experimental nano-hybrid MTA root-end filling material provides enhanced shear bond strength than conventional micron-sized MTA root-end filling material.

Synthesis of White Mineral Trioxide Aggregate (WMTA) Using Silica from Rice Husk and Calcium Carbonate from Limestone

White Mineral Trioxide Aggregate (WMTA) was produced using silica as the initial material extracted from rice husk ash and calcium carbonate limestone. This research was initiated by calcinating rice husk ash at 700°C for 3 hours. Silica extraction was performed using 2 M NaOH and added HCl. The extract precipitate was washed using deionized water. Calcium carbonate was made from limestone using 1 M HNO3 and NH3 and continued with carbonation. WMTA was produced by mixing SiO2, CaCO3, and Al2O3. The mixture was homogenized with deionized water and heated, then pellets calcined made at a temperature of 1000°C, and calcination products were added Bi2O3. Synthesized WMTA characterized using TGA/DSC, FTIR, and XRD showed the presence of Ca3SiO5, Ca2SiO4, and Ca3Al2O6 phases, which were like ProRoot’s WMTA.

Physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic repair material

The aim of this study was to evaluate the physicochemical properties, cytotoxicity and bioactivity of a ready-to-use bioceramic material, Bio-C Repair (Angelus), in comparison with White MTA (Angelus) and Biodentine (Septodont). The physicochemical properties of setting time, radiopacity, pH, solubility, dimensional and volumetric changes were evaluated. Biocompatibility and bioactivity were assessed in Saos-2 osteoblast cell cultures by the MTT assay 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide), Neutral Red (NR), Alizarin Red (ARS), and cell migration tests. Statistical analysis was performed by ANOVA, Tukey or Bonferroni tests (α = 0.05). Bio-C Repair had the longest setting time (p < 0.05), but radiopacity and solubility were accordance with the ISO 6876/2012 standards, besides linear expansion. Bio-C Repair and MTA had similar volumetric change (p > 0.05); lower than Biodentine (p < 0.05). All the materials evaluated had an alkaline pH. Bio-C Repair was cytocompatible and promoted mineralized nodule deposition in 21 days and cell migration in 3 days. In conclusion, Bio-C Repair had adequate radiopacity above 3mm Al, solubility less than 3%, dimensional expansion, and low volumetric change. In addition, Bio-C Repair promoted an alkaline pH and presented bioactivity and biocompatibility similar to MTA and Biodentine, showing potential for use as a repair material.

Addition of MTA in a salicylate-based resin root canal sealer to retrograde root-end filling

Aim To evaluate the flow, pH and calcium release of white MTA (WMTA), salicylate-based resin root canal sealer (Sealapex; SEAL) and SEAL containing 10 (SE10) or 20% (SE20) (w/w) of MTA. Methodology Flow test was realized according to ISO 6876 specification. The sealers samples (n= 10) were placed in polyethylene tubes and immersed in deionized water. After 24 hours and 7, 14, and 28 days, the water pH was determined with a pH meter, and calcium release was assessed by atomic absorption spectrophotometry. Results SEAL and WMTA showed respectively the highest and lowest flow rate when compared with the other materials (P&lt;0.05). SE20 showed the highest pH value only in 24h and 7 days periods (p&lt;0.05). In 14- and 28-days periods, SEAL showed the lowest pH value (p&lt;0.05), but there are no differences between other groups (p&gt;0.05). In all periods, WMTA and SEAL respectively showed the highest and lowest calcium release (p&lt;0.05). Conclusions SE20 proves to be an association with better flow and handling than WMTA, with satisfactory potential for alkalinization and calcium release.

The Effect of a Setting Accelerator on the Physical and Mechanical Properties of a Fast-set White Portland Cement Mixed with Nano-zirconium Oxide.

This study compared the effects of calcium chloride dihydrate (CaCl2.2H2O) on the physical properties and push-out bond strength of white Mineral Trioxide Aggregate (WMTA) and an experimental Malaysian Portland cement mixed with nano-zirconium oxide (nano-ZrO) [(radiopaque Malaysian Portland cement (RMPC). Mineral Trioxide Aggregate (MTA) was the first calcium silicate cement (CSC) introduced in dentistry, but up to date, it is an expensive cement with long setting time and causes tooth discolouration. Although Portland cement has been introduced as a potential substitute to MTA, it still faces some challenges such as long setting time and lack of sufficient radiopacity. Four groups [WMTA, RMPC, fast-set WMTA (FS-WMTA) and fast-set RMPC (FS-RMPC)] were prepared. Initial setting time was evaluated using Vicat apparatus. The pH was measured at seven-day intervals. For discolouration potential, cements were packed in the pulp chamber of 46 extracted maxillary incisors. Spectrophotometric readings were obtained at seven-day intervals, and the rate of colour change (ΔE) was recorded. For the push-out bond strength testing, cements were applied in 48 sectioned root samples, and the test was performed using universal testing machine at crosshead speed of 0.5 mm/min until bond failure. Statistical analysis was done according to the nature of each group of data using SPSS 26. Addition of CaCl2.2H2O decreased the initial setting times of both RMPC and WMTA significantly (p<0.05). The pH values of FS-WMTA and FS-RMPC were comparable to their non-accelerated counterparts ranging from 10 to 12. Discolouration effect was more obviously observed with WMTA and FS-WMTA with time compared to RMPC formulations. Push-out bond strength of the two materials also showed an increase with the addition of the accelerator, however, only FS-WMTA showed statistically significant difference compared to WMTA (p<0.05). The addition of CaCl2.2H2O improves the physical and mechanical properties of the newly formulated RMPC and WMTA. The RMPC formulation overcomes the discolouration potential of WMTA. (EEJ-2022-12-155).

Effect of white tea extract incorporated calcium silicate cements on flexural strength and collagen degradation of dentin

ABSTRACT Aim: The aim of the study was to comparatively evaluate the effect of white tea extract-incorporated mineral trioxide aggregate (MTA) and Biodentine (BD) on collagen degradation and flexural strength of coronal dentin. Methods: Two hundred and fifty dentin beams (10 mm × 2 mm × 2 mm) were obtained from the mid-coronal portion of caries-free human 3rd molars. They were randomly assigned to five experimental groups (n = 50). Group 1-control group (No experimental materials placed); Group 2-MTA; Group 3-MTA with 10% white tea extract (WMTA); Group 4-BD; and Group 5-BD with 10% white tea extract (WBD). All experimental materials were mixed and then spread onto the prepared dentin beams. Each group was further divided into five subgroups with each 10 samples according to aging periods of 24 h, 1, 3, 6 months, and 1 year as A, B, C, D, and E, respectively. The dentin beams were placed in contact with a set calcium silicate cement block in silicone molds, with only one side of each beam exposed to the cement at 37°C in a 100% relative humidity chamber. At each designated time period, the beams were copiously rinsed with deionized water and tested for flexural strength and collagen degradation using a universal testing machine and Fourier Transform-Raman spectrometer, respectively. Flexural strength results were statistically analyzed using one-way ANOVA, followed by post hoc adjustment with Tukey’s test for pair-wise comparisons with P &lt; 0.05. Results: Collagen degradation was more in Group 2, followed by 4, 3, and 5. All the groups showed a gradual reduction in flexural strength over 1 year. Group 2 showed the highest reduction in flexural strength over 1 year. Group 5 showed the least reduction in flexural strength. Conclusion: BD and white tea-incorporated BD showed less collagen degradation and better flexural strength than MTA and white tea-incorporated MTA, respectively.

High-plasticity mineral trioxide aggregate and its effects on M1 and M2 macrophage viability and adherence, phagocyte activity, production of reactive oxygen species, and cytokines.

This study evaluated the effects of high-plasticity mineral trioxide aggregate (MTA-HP) on the activity of M1 and M2 macrophages, compared to white MTA (Angelus). Peritoneal inflammatory M1 (from C57BL/6 mice) and M2 (from BALB/c mice) macrophages were cultured in the presence of the tested materials. Cell viability (MTT and trypan blue assays), adhesion, phagocytosis, reactive oxygen species (ROS) production, and tumor necrosis factor (TNF)-α and transforming growth factor (TGF)-β production were evaluated. Parametric analysis of variance and the non-parametric Kruskal-Wallis test were used. Results were considered significant when p < 0.05. The MTT assay revealed a significant decrease in M1 metabolism with MTA-HP at 24 hours, and with MTA and MTA-HP later. The trypan blue assay showed significantly fewer live M1 at 48 hours and live M2 at 48 and 72 hours with MTA-HP, compared to MTA. M1 and M2 adherence and phagocytosis showed no significant differences compared to control for both materials. Zymosan A stimulated ROS production by macrophages. In the absence of interferon-γ, TNF-α production by M1 did not significantly differ between groups. For M2, both materials showed higher TNF-α production in the presence of the stimulus, but without significant between-group differences. Likewise, TGF-β production by M1 and M2 macrophages was not significantly different between the groups. M1 and M2 macrophages presented different viability in response to MTA and MTA-HP at different time points. Introducing a plasticizer into the MTA vehicle did not interfere with the activity of M1 and M2 macrophages.

Comparison of Coronal Discoloration Induced by White MTA and CEM Cement

Coronal discoloration of endodontically treated teeth is a challenge in clinical dentistry. This study aimed to compare coronal discoloration induced by White Mineral Trioxide Aggregate and Calcium-enriched mixture cement. Fifty single-rooted, unrestored premolar teeth extracted for orthodontic reasons were selected. After access cavity preparation, all the root canals were instrumented with MTWO rotary files up to #40.6%. The specimens were randomly assigned to two experimental groups, White Mineral Trioxide Aggregate and Calcium-enriched mixture cement groups (n = 20), and two control groups (n = 5). In the White Mineral Trioxide Aggregate and Calcium-enriched mixture cement groups, the material was condensed via the access cavity 3 mm below the cementoenamel junction to a thickness of 3 mm. Tooth color was assessed using computer analysis of digital images. Tooth color measurements were recorded at eight time intervals: before material placement (but after tooth preparation), at 24 h, 48 h, one week, two weeks, four weeks, eight weeks, and sixteen weeks after material placement. Data were analyzed using t-test, ANOVA, repeated measure ANOVA, and Tukey HSD tests. The significance level was set at 5% for all the tests. Cervical discoloration of teeth in both experimental groups significantly increased over time (p &lt; 0.05). However, samples in the White Mineral Trioxide Aggregate group showed more discoloration in cervical regions than Calcium-enriched mixture cement specimens after two, four, eight, and sixteen weeks (p &lt; 0.05). Applying both White Mineral Trioxide Aggregate and Calcium-enriched mixture cement induced coronal discoloration; however, White Mineral Trioxide Aggregate samples exhibited greater cervical discoloration than Calcium-enriched mixture cement specimens after two, four, eight, and sixteen weeks.

Participation of fibroblast growth factor-1 and interleukin-10 in connective tissue repair following subcutaneous implantation of bioceramic materials in rats.

To evaluate whether the bioceramic materials Bio-C Pulpo (Bio-C, Angelus) and mineral trioxide aggregate (MTA) Repair HP (MTA-HP, Angelus) induce fibroblast proliferation and release of interleukin-10 (IL-10), an anti-inflammatory cytokine, stimulating connective tissue remodelling. The tissue response of Bio-C and MTA-HP was compared with the White MTA (WMTA; Angelus) since studies have demonstrated that WMTA induces tissue repair. Bio-C, MTA-HP and WMTA were inserted into polyethylene tubes and implanted in the subcutaneous tissue of Holtzman rats for 7, 15, 30 and 60 days. As a control group (CG), empty tubes were implanted subcutaneously. The number of fibroblasts (FB), Ki-67-, fibroblast growth factor-1- (FGF-1) and IL-10-immunolabelled cells and collagen content in the capsules was obtained. The data were subjected to two-way anova followed by Tukey's test (p ≤ .05). At 7 days, significant differences in the number of FB were not detected amongst Bio-C, MTA-HP and WMTA groups (p˃.05). The capsules of all groups exhibited a significant increase in the number of FB and content of collagen over time. From 7 to 60 days, a significant reduction in the number of FGF-1- and Ki-67-immunolabelled cells was seen in the capsules of all specimens. In all periods, no significant difference in the number of FGF-1-immunolabelled cells was detected between Bio-C and CG specimens. At 60 days, significant differences in the immunoexpression of FGF-1 were not observed amongst the groups. At 7 and 15 days, the highest immunoexpression for Ki-67 was present in Bio-C specimens whilst, after 30 and 60 days, no significant difference was observed amongst the bioceramic materials. At 7 days, few IL-10 immunolabelled cells were present in the capsules of all specimens whereas, at 60 days, a significant increase in the IL-10-immunostaining was present in all groups. At 60 days, the Bio-C, MTA-HP and WMTA groups showed a greater number of IL-10-immunolabelled cells than in the CG specimens (p < .0001). Bio-C, MTA-HP and WMTA stimulate fibroblast proliferation, leading to the formation of collagen-rich capsules. FGF-1 and IL-10 may mediate the remodelling of capsules around Bio-C, MTA-HP and WMTA bioceramic materials.