White LED Light Research Articles

A Novel Broadband Green Phosphor La2W2O9: Bi3+, and Its Application in High Color-Rendering Index pc-WLED

Broadband green phosphors have important applications in overcoming the blue-green (cyan) 470–510[Formula: see text]nm gap of phosphor-converted white LED (pc-WLED) and achieving high color rendering index (CRI) white lighting. In this work, a broadband green phosphor La2W2O9: [Formula: see text]Bi[Formula: see text] was synthesized by solid-state method. The phase, morphology and luminescence properties of the series of phosphors were systematically studied. The results showed the La2W2O9: [Formula: see text]Bi[Formula: see text] green phosphor exhibits a wide emission band in the range of 400–800[Formula: see text]nm with full width at half-maximum (FWHM) of 164[Formula: see text]nm, filling the cyan gap and reaching its peak at 550[Formula: see text]nm. The phosphor exhibits broadband excitation, and the excitation range covers the wavelength region of 200–500[Formula: see text]nm, and matches well with commercial ultraviolet LED. With the obtained broadband green phosphor, commercial CaAlSiN3:Eu[Formula: see text] red phosphor, commercial BaMgAl[Formula: see text]O17:Eu[Formula: see text] blue phosphor, and a 365[Formula: see text]nm commercial chip, a warm white pc-WLED device with a high color-rendering index (Ra[Formula: see text]97.4, R1–R15[Formula: see text]90) and low correlated color temperature (CCT[Formula: see text]3610[Formula: see text]K) was fabricated. The results demonstrate the wide range of applications for La2W2O9:Bi[Formula: see text] phosphor in the field of premium warm white LED lighting.

Imaging pollen using a Raspberry Pi and LED with deep learning

The production of low-cost, small footprint imaging sensor would be invaluable for airborne global monitoring of pollen, which could allow for mitigation of hay fever symptoms. We demonstrate the use of a white light LED (light emitting diode) to illuminate pollen grains and capture their scattering pattern using a Raspberry Pi camera. The scattering patterns are transformed into 20× microscope magnification equivalent images using deep learning. We show the ability to produce images of pollen from plant species previously unseen by the neural network in training. Such a technique could be applied to imaging airborne particulates that contribute to air pollution, and could be used in the field of environmental science, health science and agriculture.

Highly Efficient Wide Bandgap Perovskite Solar Cells With Tunneling Junction by Self-Assembled 2D Dielectric Layer.

Reducing non-radiative recombination and addressing band alignment mismatches at interfaces remain major challenges in achieving high-performance wide-bandgap perovskite solar cells. This study proposes the self-organization of a thin two-dimensional (2D) perovskite BA2PbBr4 layer beneath a wide-bandgap three-dimensional (3D) perovskite Cs0.17FA0.83Pb(I0.6Br0.4)3, forming a 2D/3D bilayer structure on a tin oxide (SnO2) layer. This process is driven by interactions between the oxygen vacancies on the SnO2 surface and hydrogen atoms of the n-butylammonium cation, aiding the self-assembly of the BA2PbBr4 2D layer. The 2D perovskite acts as a tunneling layer between SnO2 and the 3D perovskite, neutralizing the energy level mismatch and reducing non-radiative recombination. This results in high power conversion efficiencies of 21.54% and 19.16% for wide-bandgap perovskite solar cells with bandgaps of 1.7 and 1.8 eV, with open-circuit voltages over 1.3 V under 1-Sun illumination. Furthermore, an impressive efficiency of over 43% is achieved under indoor conditions, specifically under 200 lux white light-emitting diode light, yielding an output voltage exceeding 1 V. The device also demonstrates enhanced stability, lasting up to 1,200 hours.

Investigation of luminescence properties and energy transfer mechanism in Sm3+ and Eu3+ co-doped BaY2ZnO5 red phosphors

In this investigation, the photoluminescence properties, energy transfer phenomenon of BaY2ZnO5:Sm3+/Eu3+ doped/co-doped phosphor are reported and synthesized by high temperature solid state reaction method. The crystal structure, micromorphology, optical diffuse reflectance and photoluminescence properties of the samples were studied. The results show that concentration quenching phenomenon is found. With the increase of Eu3+ ion concentration, the emission peaks of Sm3+ gradually decrease, indicating that energy transfer between Sm3+ and Eu3+. The optimal concentrations are 0.05 mol and 0.2 mol for single doping Sm3+ and Eu3+, respectively. The energy transfer efficiency is calculated to be 78.47–95.19 %. The BaY2ZnO5 phosphors have potential application value in the fields of white light LEDs and anti-counterfeiting.

Novel synthesis organic–inorganic heterojunctions of protonated g-C3N4/Fe3O4/AgBr/AgCl/AgI quinary magnetic photocatalyst with enhanced visible-light photocatalytic degradation of methylene blue in water

A novel magnetic quinary nanocomposite, protonated g-C3N4/Fe3O4/AgBr/AgCl/AgI, was synthesized using a wet chemical method. The multi-heterojunction photocatalyst with multi-carrier source and multi-channel carrier transport is constructed to enhance the photocatalytic degradation performance of pure g-C3N4. The design of the quinary nanocomposite is also an effective approach to solve the chemical stability problem of silver halides. The photocatalytic degradation efficiency under visible light irradiation was analyzed for methylene blue (MB) as the target organic pollutant. The quinary nanocomposite with 10 % g-C3N4 displayed high photocatalytic performance, with 83 % of MB degraded under 6 h LED white light irradiation. The effective quinary nanocomposite has good magnetic properties and can be magnetically separated to prevent secondary pollution of the photocatalyst in water. Parameters such as initial concentration of pollutant, initial solution pH, and light source were studied. Zeta potential results showed that the quinary nanocomposite could disperse homogenously to decrease aggregation in the solution. The photocatalytic degradation mechanism was investigated, and the mineralization results were analyzed based on liquid chromatography-mass spectroscopy (LC-MS) and total organic carbon (TOC). It was found that the hydroxyl and superoxide radicals were major reactive species by scavenging experiments. Additionally, protonated g-C3N4/Fe3O4/AgBr/AgCl/AgI nanocomposite showed excellent reusability after magnetic separation and regeneration, thus suggesting it to be a promising photocatalyst for treating wastewater containing organic contaminants.

Integrated transcriptomic and miRNA-seq analysis of Pak-choi provides insight into the molecular mechanisms involved in the preservation of postharvest quality by white LED light irradiation

Low-intensity white light-emitting diode (LED) irradiation effectively delays postharvest senescence in pak-choi at 20 °C and 90 % relative humidity. In this study, RNA-seq and miRNA-seq analyses were conducted on samples collected at 0 d (initial sample) and 5 d (CK and LED-treated samples) to evaluate the regulatory effects of white LED irradiation on miRNA. The resulting data revealed a total of 23 differentially expressed miRNAs (DEmiRNAs) in the CK/LED group on 5 d of storage. LED irradiation induced the expression of AP2 family genes and the biosynthesis of aliphatic glucosinolates by modulating the level of bra-miR172 family miRNAs. LED irradiation also stimulated the expression of genes associated with the photosynthetic pathway in pak-choi and regulated biosynthesis of ascorbic acid and resistance-associated transcription factors by modulating the level of novel miRNAs. Furthermore, LED irradiation suppressed cellulase and polygalacturonase activity, and maintained the pectin content. These findings demonstrate the ability of white LED light irradiation to significantly delay the postharvest senescence process in pak-choi by modulating miRNA expression.

Research on CdSe/ZnS Quantum Dots-Doped Polymer Fibers and Their Gain Characteristics.

Polymer fibers are considered ideal transmission media for all-optical networks, but their high intrinsic loss significantly limits their practical use. Quantum dot-doped polymer fiber amplifiers are emerging as a promising solution to this issue and are becoming a significant focus of research in both academia and industry. Based on the properties of CdSe/ZnS quantum dots and PMMA material, this study experimentally explores three fabrication methods for CdSe/ZnS quantum dots-doped PMMA fibers: hollow fiber filling, melt-drawing, and melt extrusion. The advantages and disadvantages of each method and key issues in fiber fabrication are analyzed. Utilizing the CdSe/ZnS quantum dots-doped PMMA fibers that were fabricated, we theoretically analyzed the key factors affecting gain performance, including fiber length, quantum dots doping concentration, and signal light intensity. Under the conditions of 1.5 W power and 445 nm laser pumping, a maximum on-off gain of 16.2 dB was experimentally achieved at 635 nm. Additionally, using a white light LED as the signal source, a broadband on-off gain with a bandwidth exceeding 70 nm and a maximum gain of 12.4 dB was observed in the 580-650 nm range. This research will contribute to the development of quantum dots-doped fiber devices and broadband optical communication technology, providing more efficient solutions for future optical communication networks.

Cytotoxic and pro-oxidant profile of a photosensitive ruthenium nitrosyl candidate for NO delivery in healthy human fibroblasts.

Ruthenium nitrosyl (Ru-NO) complexes are of interest as photoactive nitric oxide (NO) donor candidates for local therapeutic applications. NO plays a crucial regulatory role in skin homeostasis, concentration-dependently affecting processes like the proliferation, apoptosis, autophagy and redox balance. In this context, we investigated HE-10, a ruthenium-based photoinducible NO donor, for its pro-oxidant and cytotoxic effects under light and dark conditions in VH10 human foreskin fibroblast cells. We also tested its intracellular and extracellular NO-releasing function. Our study reveals a significant dose-dependent cytotoxic effect of HE-10, an increase in intracellular reactive oxygen and nitrogen species, and the occurrence of apoptosis in skin fibroblast cells. Furthermore, exposure to both increasing doses of HE-10 and white LED light led to substantial cellular events, including a significant induction of autophagy and G2/M phase cell cycle arrest. Paradoxically, these effects were not solely attributable to NO release based on DAF2-DA NO probe results, suggesting that intracellular photochemical reactions additional to NO photolysis contribute to HE-10's biological activity. This study shows that HE-10 exhibits both cytotoxic and potential therapeutic effects, depending on concentration and light exposure. These findings are crucial for developing targeted Ru-NO complex treatments for skin diseases and potentially certain types of skin cancer, where controlled NO release could be beneficial.

Unified Crystal Phase Control with MACl for Inducing Single-Crystal-Like Perovskite Thin Films in High-Pressure Fusion Toward High Efficiency Perovskite Solar Cell Modules.

Perovskite solar cells, recognized for their high photovoltaic conversion efficiency (PCE), cost-effectiveness, and simple fabrication, face challenges in PCE improvement due to structural defects in polycrystalline films. This study introduces a novel fabrication method for perovskite films using methylammonium chloride (MACl) to align grain orientation uniformly, followed by a high-pressure process to merge these grains into a texture resembling single-crystal perovskite. Employing advanced visual fluorescence microscopy, charge dynamics in these films are analyzed, uncovering the significant impact of grain boundaries on photo-generated charge transport within perovskite crystals. A key discovery is that optimal charge transport efficiency and speed occur in grain centers when the grain size exceeds 10µm, challenging the traditional view that efficiency peaks when grain size surpasses film thickness to form a monolayer. Additionally, the presence of large-sized grains enhances ion activation energy, reducing ion migration under light and improving resistance to photo-induced degradation. In application, a perovskite solar cell module with large grains achieve a PCE of 22.45%, maintaining performance with no significant degradation under continuous white LED light at 100 mA cm-2 for over 1000h. This study offers a new approach to perovskite film fabrication and insights into optimizing perovskite solar cell modules.

Evaluating CO2 concentration effects on growth kinetics and fatty acid composition in Euglena gracilis

ABSTRACT Industrial development has significantly increased CO2 emissions, from 280 ppm in the pre-industrial era to over 400 ppm today, contributing to the greenhouse effect and climate change. This study investigates the impact of varying CO2 concentrations on the growth, biomass accumulation, and biochemical composition of Euglena gracilis as microalgae-based carbon capture and utilization. E. gracilis was cultivated with CO2 concentrations of 0%, 5%, 10%, and 30%, using white LED lights at 3000 lux. Growth was monitored through cell counts and optical density, while biomass and primary metabolites were analysed using standard methods. Fatty acid content was assessed using GC-MS and GC-FID. The results showed optimal growth at 5% CO2, with biomass reaching 2.3 g l‒1 on the day of harvest. The highest lipid content was obtained in the 15% CO2 treatment with a total lipid of 0.35 g l‒1. As for the decrease in pH, it showed that each treatment experienced a reduction in pH from 3.5 to almost 2.0. Fatty acid content was dominated by polyunsaturated fatty acids (PUFAs), especially in the control group and 15% CO2 treatment, contributing up to 47.66%, and 46.36% to the group, respectively. The study highlights the importance of optimizing CO2 levels for microalgae cultivation to enhance biomass and lipid production. Elevated CO2 levels boost lipid synthesis but can stress cells if too high, suggesting a need for adaptive CO2 addition methods.

Vacuum-Deposited Bifacial Perovskite Solar Cells.

Bifacial perovskite solar cells (Bi-PSCs) require thick perovskite layers to sufficiently absorb higher wavelength light. Also, it is critical to know which electrode (top or bottom) can more efficiently harvest the direct incident solar irradiance. Here, fully vacuum-deposited Bi-PSCs are reported with perovskite layer thicknesses ranging from ∼720 nm to 1.3 μm. With an optimized ITO top-electrode, the Bi-PSCs generated higher current density under top-illumination by >1 mA/cm2, attaining the highest value of 24.98 mA/cm2. The best Bi-PSC exhibited an efficiency of 19.6% under top-illumination and 18.71% under bottom-illumination, resulting in a high bifaciality factor of ∼0.95. Furthermore, even after employing cover glass encapsulation on the top-electrode, the Bi-PSCs still produced higher current density from top-illumination. Upon bifacial illumination using simulated 1-Sun light as the main illumination and a white LED light albedo of ∼0.21, the champion Bi-PSC demonstrated a current density value of ∼30.00 mA/cm2.

A novel Na2Ca2Si3O9: Tb3+ glass ceramic with high luminescence efficiency and robust thermal stability for white LED lighting application

Given the increasing demand for white light emitting diode (WLED) lighting devices marked by high color rendering indices (CRI) and exceptional thermal stability, there is a burgeoning interest in developing emitters with enhanced performance. Rare earth (RE) ion-activated glass ceramics (GCs) have garnered significant attention due to their outstanding physicochemical and thermal stability, alongside their high luminescence efficiency. In this study, the GCs doped with Tb3+ ions in the Na2O-CaO-SiO2 system matrix were synthesized, incorporating Na2Ca2Si3O9 nanocrystals averaging less than 100 nm in size. Notably, these GC materials demonstrated superior luminescence efficiency in the green light emission under the irradiation of 376 nm light compared to the parent glass. A comprehensive analysis of fluorescence spectra revealed an impressive internal quantum efficiency of 87.34 % for this Tb3+-doped GC. Furthermore, the GC retained 90 % and 84 % of the initial luminescence intensity at 150 °C and 200 °C in comparison to the luminescence level at room temperature, showcasing exceptional resistance to fluorescence thermal quenching. Verification experiments utilized UV LED chip, (Sr, Ca)AlSiN3: Eu2+ red phosphor, BaMgAl10O17: Eu2+ blue phosphor, and Tb3+-doped GC to encapsulate the WLED device, achieving a remarkable CRI of 92, CIE chromaticity coordinates (0.3547, 0.3361), and a correlated color temperature (CCT) of 4550K. In conclusion, the experimental outcomes unequivocally underscore the significant application potential of these Tb3+-doped GCs in the territory of warm WLED lighting.

Co-exposure effect of different colour of LED lights and increasing temperature on zebrafish larvae (Danio rerio): Immunohistochemical, metabolomics, molecular and behaviour approaches

Although there are studies in the literature on the effects of different coloured light-emitting diodes (LEDs) on different organisms, there is limited information on how these effects change with temperature increase. In this study, the effects of blue, green, red and white LED lights on the early development process of zebrafish (Danio rerio (Hamilton, 1822)) were comprehensively investigated. In addition, to simulate global warming, it was examined how a one-degree temperature increase affects this process. For this purpose, zebrafish embryos, which were placed at 4 hpf (hours post fertilization) in an incubator whose interior was divided into four areas, were kept at three different temperatures (28, 29 and 30 °C) for 120 h. The group kept in a dark environment was chosen as the control. The temperature of the control group was also increased at the same rate as the other groups. The results showed that at the end of the exposure period, temperature and light colour caused an increase in body malformations. Histopathological damage and immunopositive signals of HSP 70 and 8-OHdG biomarkers in larval brains, increase in free oxygen radicals, apoptotic cells and lipid accumulation throughout the body, increase in locomotor activity, decrease in heart rate and blood flow, and significant changes in more than thirty metabolite levels were detected. In addition, it has been determined that many metabolic pathways are affected, especially glutathione, vitamin B6 and pyrimidine metabolism. Moreover, it has been observed that a one-degree temperature increase worsens this negative effect. It was concluded that blue light was the closest light to the control group and was less harmful than other light colours. The study revealed that blue light produced results that were most similar to those seen in the control group.

Implications of White Light-Emitting Diode-Based Photoirradiation on Green Synthesis of Silver Nanoparticles by Methanol- and Aqueous-Based Extracts of Bergenia ciliata Leaves.

Bergenia ciliata (BC) is a perennial herb that is frequently used as a traditional medicine. Its leaves and rhizomes are reported to have significant antioxidant, metal-reducing, and chelating properties. Although the rhizomes have the potential to synthesize silver nanoparticles (AgNPs), the leaves are yet to be studied for the green synthesis of metal nanoparticles. Likewise, photoirradiation also plays a significant role in the green synthesis of metal nanoparticles. In the current study, we intended to demonstrate the implications of photoirradiation by white light-emitting diode (LED) on the aqueous and methanol extracts (AE and ME, respectively) of BC leaf-mediated green synthesis of AgNPs. In this regard, the AgNP synthesis of the two extracts was performed in the dark and under 250-lumen (lm) and 825 lm LED bulbs. The physicochemical characterization of the synthesized nanoparticles was also performed, wherein percent nanoparticles yield, morphology of the nanoparticles, shape, size, percent elemental composition, crystallinity, and nanoparticle stability were studied. The nanoparticle-synthesizing potential of the two extracts contradicted significantly in the presence and absence of light, while the AE produced a significantly high number of nanoparticles in the dark (17.26%), and increasing light intensities only attenuated the nanoparticle synthesis, whereas ME synthesized comparatively negligible silver nanoparticles in the dark (1.23%). However, increasing light intensities significantly enhanced the number of nanoparticles synthesized in 825 lms (7.41%). The GCMS analysis further gave a comparative insight into the phytochemical composition of both extracts, wherein catechol and pyrogallol were identified as major reducing agents for nanoparticle synthesis. The influence of light intensities on the physiochemical characterization of AgNPs was predominant. While the size of both the AE- and ME-mediated AgNPs increased considerably (20-50 nm diameter) with increasing light intensities, the percent of silver atoms decreased significantly with increasing light intensities in both the AE- and ME-mediated AgNPs with ranges of 13-18% and 14-24%, respectively. The nanoparticle stability studies suggested that both the AE- and ME-mediated AgNPs were stable for up to 15 days when stored at 4 °C. The stability of both nanoparticles was attributed to the presence of a wide range of phytochemicals. In conclusion, the AE of BC leaves was reported to have significantly higher AgNP-synthesizing potential as compared to the ME. However, AE-mediated AgNP synthesis is attenuated by photoirradiation, whereas ME-mediated AgNP synthesis is enhanced by photoirradiation. The photoirradiation by white LED light increases the size of the AgNPs, while the percent silver composition declines, irrespective of the extract type. Both extracts, however, have nanoparticle stabilizing potential, thereby producing stable nanoparticles.

One-step synthesis of O, P co-doped g-C3N4 under air for photocatalytic reduction of uranium

The photocatalytic reduction of uranium from nuclear wastewater represents a promising method for both uranium extraction and environmental remediation. This approach facilitates the recovery of uranium resources for the nuclear industry while addressing environmental pollution. Despite significant research advancements, there remains a need for cost-effective and environmentally friendly catalytic materials. In this context, we present a two non-metal O, P co-doped g-C3N4 (OPCN) synthesized via a simple one-step thermo-polymerization in air. OPCN demonstrates a high uranium reduction efficiency of 94.9 % under white LED light illumination. Even after five cycles, OPCN maintained a reduction efficiency of 81.7 %, highlighting its stability and reusability. Additionally, OPCN also performs effectively in uranium reduction under natural sunlight and exhibits impressive antimicrobial properties. These features position OPCN as a promising candidate for practical environmental applications.

Preparation and Optical and Electrochemical Properties of Boron (III) Octafluorosubphthalocyanines with One Triselenole and One Diselenet Ring.

Unsymmetric boron (III) subphthalocyanines with a triselenole ring or a diselenete ring and eight fluoro groups were prepared by the reaction of 5,6-dicyano-4,7-diethylbenzo-[1,2,3]triselenole and tetrafluorophthalonitrile with trichloroborane in xylene. The reaction was accompanied by a contraction of the triselenole ring to the diselenete ring. The substrate, dicyanobenzo[1,2,3]triselenole, was prepared by a new procedure via a photolytic demethylenation reaction of 3,7-diethyl[1,3]diselenolophthalonitrile using a 10 W white LED light. While triselenolosubphthalocyanine was treated by triphenylphosphine to give the diselenete derivative, the reaction of diselenetosubphthalocyanine with Woolion's reagent produced the expanded triselenole ring. The diselenete derivative reacted with tetrakis(triphenylphosphine)platinum to yield the corresponding platinum complex with Se-Pt bonds. Q-band absorption for the products appeared at around λmax=590 nm in the UV-vis spectrum and weak emission was observed at about λe=620 nm. When diselenetosubphthalocyanine was treated with pentachloro antimonate in dichloromethane or sodium metal in hexane/tetrahydrofuran, the solution showed strong ESR signals. The structures of model compounds were optimized using the DFT method with the Gaussian 09 program at the B3LYP/6-31G (d, p) level.

PENGENDALIAN HAMA ULAT GRAYAK (Spodoptera Exigua Hubner) DENGAN SISTEM LAMPU PERANGKAP PADA BAWANG MERAH (Allium Ascalonicum L.Var. Aggregatum) DI KECAMATAN ANGGERAJA KABUPATEN ENREKANG

This research was conducted with the aim of knowing how to control armyworm pests (Spodoptera exigua Hubner) by using yellow LED (Light Emitting Diode) trap lights and white LED (Light Emitting Diode) trap lights on shallot plants. The results of this study indicate that. The number of imago on white LED lights caught more Spodoptera Exigua imago in the research basin. that the average Spodoptera exigua pest on shallot plants was significantly different or there was a significant difference in the treatment of the yellow LED trap lights and the white LED trap lights. The use of plants on land without light traps has increased. Lower maintenance wet bulb production without trapping lights

Hazelnut proteins detection in cookies using an immersible label-free photonic chip sensor

Rapid and sensitive methods to detect allergenic proteins in foods at the point-of-need could help to protect allergic consumers from life-threatening accidental exposure. In this context, the development of a label-free optical immunosensor for detecting hazelnut proteins in cookies is presented. The sensor is based on silicon photonic chips containing two integrated Mach-Zehnder interferometers (MZI) with light input and output on one side of the chip, and sensing window openings on the other side. Coupling with a white-light LED and a spectrometer for signal recording is achieved via a bifurcated fiber. The sensing window of one of the MZIs is modified with a mouse monoclonal antibody against hazelnut proteins, while the other sensing window is modified with bovine serum albumin to serve as blank. The assay follows a two-step sandwich immunoassay format, involving a 10-min reaction with the hazelnut proteins calibrator or cookie sample, followed by a 2-min reaction with a mixture of monoclonal antibodies. All reactions were performed by immersing the chip side where the MZIs windows are located into the solutions. The recorded spectrum is processed in real-time to transform the spectrum shifts due to immunoreactions taking place on the sensing windows of the two MZIs into phase shifts. The developed assay detects hazelnut proteins at concentrations as low as 25 ng/mL in calibrators prepared in buffer or in aqueous extract of hazelnut-free cookies. Additionally, cookies containing hazelnuts were analyzed demonstrating the sensor ability for fast and sensitive detection of the hazelnut proteins in commercial products.

Macrocyclic porphyrin photocatalysts without metal chelation: A novel pathway for complete degradation of tough halophenols with longwave visible LED light source

Halophenols are toxic and persistent pollutants in water environments which poses harm to various organisms. Due to their high stability and long residence time, ultraviolet radiation, heavy metals and oxidizing agents have been largely adopted on treating these compounds. However, these treatment methods could pose toxicity or hazardous risks to the marine environment and plant operators. In this study, a water-soluble porphyrin photocatalyst was synthesized and introduced for halophenol treatment using UV-free LED white light. The porphyrin catalyst is a macrocyclic ring consisting of pyrroles linked with methine bridges, the highly conjugated ring provided the superior functionality of visible light absorption. Surprisingly, over 99 % degradation of halophenols and over 90 % dehalogenation have been achieved without metal chelation, even higher than those of transition metal porphyrins with inclusion of Fe3+, Zn2+, Cu2+, Co2+, Ni2+, and Mn2+. Ring-opening reactions were confirmed with the formation of carboxylic acids; dicarboxylic acids like acrylic acid, and malonic acid; while fumaric acid was the main product. Total organic carbon results indicated no CO2 produced during the reaction. Triplet absorbance and scavenger studies also indicated that singlet oxygen and conduction band electrons are the main radical species for halophenol degradation. The 100-fold singlet emission quenching over triplet absorption quenching indicated that the excited electrons tend to be transferred via singlet state. This concept brings along new approaches detoxifying halophenol-related wastewater without UV, metals and other additives, which is more environmentally-friendly and sheds light to the conversion of toxic materials into useful chemical precursors.

Exposure to neonicotinoid pesticides induces physiological disorders and affects color performance and foraging behavior in goldfish.

We investigated the effects of neonicotinoid pesticides (NEOs) on the spontaneous swimming and foraging behavior, as well as the morphological and physiological changes of goldfish. Most fish reared in thiamethoxam (THM)-sprayed rice fields showed the scales easily peeled off, and increased ascites. Some individuals showed decreased bio-defense activity and low plasma Ca2+. Similar changes were found in the exposure test to THM (1.0 and 20.0 μg/L) and dinotefuran (1.2 and 23.5 μg/L). Next, the effects of a low concentration of THM (1.0 μg/L) on the spontaneous swimming and foraging behavior of fish were examined. Fish exposed to THM for 1 week became restless and had increased the swimming performance, especially under natural light, white LED lighting and blue LED lighting. Goldfish exposed to THM had also increased intake of shiny white beads under green LED illumination. These results indicate that the exposure to NEO, even for a short period and at low levels, not only suppressed bio-defense activities and metabolic abnormalities, but also stress response, the swimming and foraging behavior of the fish are likely to be significantly suffered.