Wettability Of Composite Solder Research Articles

Effect of SiC Particles Addition on the Wettability and Intermetallic Compound Layer Formation of Sn-Cu-Ni (SN100C) Solder Paste

The effects of SiC on wettability and intermetallic compound (IMC) formation of Sn-Cu-Ni solder paste composite were systematically investigated. Lead-free solder paste composite was produced by mixing silicon carbide (SiC) particle with Sn-Cu-Ni (SN100C) solder paste. The wettability of composite solder was studied by observing the contact angle between solder and copper substrate. The IMC phase formation on copper substrate interface was identified using X-ray diffraction (XRD). The phase as detected in the composite solder is Cu6Sn5.The wettability of composite solder was observed through contact angle between solder and copper substrate and Sn-Cu-Ni + 1.0 wt.% SiC shows improvements in wetting angle and suppresses the IMCs formation.

The Influence of Activated Carbon (AC) on Melting Temperature, Wettability and Intermetallic Compound Formation of Sn-Cu-Ni (SN100C) Solder Paste

This paper reports on the effect of activated carbon (AC) addition on the properties of Sn-Cu-Ni (SN100C) solder paste. The composite solder was prepared by mixing reinforcement particles (0, 0.25, 0.5, 0.75 and 1.0 wt. %) into SN100C solder paste. The melting temperature of composite solder was determined by using differential scanning calorimetry (DSC). Wettability of fabricated solder was studied through contact angles between solder and copper substrate interface. The intermetallic compound formation was studied after reflow soldering process.With increased carbon particles addition, the composite solder was found to have a slightly lower melting temperature compared to monolithic solder while the wettability of composite solder effectively had improved. The activated carbon particles in solder paste composite have significant effects on the formation of intermetallic compounds (IMCs) at the solder/Cu substrate interfaces by suppressing the IMCs thickness.