Wet Etching Of GaN Research Articles

Wet etching for improved GaN‐based HBT performance

Photoenhanced wet etching of GaN in a peroxydisulfate aqueous solution has been used in npn HBT device fabrication. The wet etch acts as a selective etch for n-type layers, where the p-type layer acts as an etch stop. This allows the use of thinner base layers in an npn structure. No counter electrode or electrical connection to the wafer is required with the approach. We present experimental results on the fabrication of BJTs and HBTs using this self-aligned wet etching. (© 2005 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim)

Wet etching of GaN, AlN, and SiC: a review

Abstract The wet etching of GaN, AlN, and SiC is reviewed including conventional etching in aqueous solutions, electrochemical etching in electrolytes and defect-selective chemical etching in molten salts. The mechanism of each etching process is discussed. Etching parameters leading to highly anisotropic etching, dopant-type/bandgap selective etching, defect-selective etching, as well as isotropic etching are discussed. The etch pit shapes and their origins are discussed. The applications of wet etching techniques to characterize crystal polarity and defect density/distribution are reviewed. Additional applications of wet etching for device fabrication, such as producing crystallographic etch profiles, are also reviewed.

Highly selective photoenhanced wet etching of GaN for defect investigation and device fabrication

ABSTRACTPhotoenhanced electro-chemical (PEC) wet etching has been shown to be suitable for dislocation-density estimation in n-GaN films as well as for GaN-based device fabrication. We report on PEC etching of n-GaN samples grown by MBE and HVPE methods in unstirred aqueous KOH solution under He-Cd laser illumination. Characterization of the etched samples was carried out using atomic force microscopy (AFM) in both cross-sectional and plan-view configurations and scanning electron microscopy (SEM). At moderate illumination densities, the SEM and AFM analyses reveal sub-100 nm scale threading vertical wires on the etched surfaces. The calculated density (∼1×10 9cm−2) is in agreement with dislocation density found by transmission electron microscopy. Using cross-sectional AFM, we find that these vertical wires are ∼1[.proportional]m high and are perpendicular to the sapphire surface. Applying a higher illumination density or an external voltage, we obtain a higher etch rate with a smooth free-feature etched surface. Some highly resistive samples that cannot be etched under normal conditions because the band bending is too small to confine the holes to the surface for them to participate in the PEC process, can be etched with the application of a voltage to the sample. In this case, the etch rate depends on both the polarity and the magnitude of the voltage applied. In an MBE-grown sample with an AlN/GaN superstructure inside, we report on high selectivity between AlN and GaN (AlN is an etch stop); the selectivity is due to the etching mechanism of the PEC process.

Pulsed Laser Etching of GaN and AIN Films

AbstractDue to limited success in wet etching of GaN and AIN, dry etching techniques have become more relevant for the processing of the GaN films. Here we demonstrate the results of an alternative dry etching process, namely, pulsed laser etching, for GaN and AIN. In this method, a KrF pulsed excimer laser (λ=248 nm, τ=30 ns) was used to etch epitaxial GaN and AIN films. The dependence of the etching characteristics on the laser energy density and the number of pulses has been studied. The etch depth showed a linear dependence on the number of pulses over a wide range of laser energy densities. The threshold intensity for GaN etching was determined to be 0.33 J/cm2. The etching rate was found to be a strong function of laser energy density. Above the threshold, the etch rate was found to be 300–1400 Å per pulse leading to etching rates of 0.1–1μm/sec depending upon the laser energy density and the pulse repetition rate. It is shown that the etching mechanism is based on laser induced absorption, decomposition and layer by layer removal of the GaN.