Well-defined Complexes Research Articles

Recent Advances in Low Valent Thorium and Uranium Chemistry

The synthesis, isolation, and characterisation of well-defined low-valent actinide complexes are reviewed with a main focus on compounds featuring uranium and thorium metal centres in formal oxidation states ≤ +3. The importance of the ligand environment in enabling access to these highly reactive species, as well as its influence on ground state electronic configurations and their reactivity, are emphasised. Furthermore, we highlight cyclic voltammetry (C.V.) studies as a more widely used method that can guide the synthesis of these highly reducing species.

Dinitrogen Reduction and Functionalization by a Siloxide Supported Thulium-Potassium Complex for the formation of Ammonia or Hydrazine Derivatives.

The dinitrogen (N2)chemistry of lanthanides remains less developed compared to the d-block metals and lanthanide-promoted N2functionalization chemistry in well-defined lanthanide complexes remains elusive. Here we report the synthesis and characterization (SQUID, EPR, DFT, X-Ray) of the siloxide supported heterobimetallic (Tm/K) complexes[{KTm(OSi(OtBu)3)3}2(μ-η2:η2-N2)] (1)and[K3{Tm(OSi(OtBu)3)3}2(μ-η2:η2-N2)] (2). Complex2provides a rare example of a metal complex of the triply reducedN23-radical. The structure of2differs from the few previously reported N23-complexes as it presents two Tm and three K cations binding the N23-radical, facilitating N2functionalization. Notably, the K3Tm2-bound N23-moiety reacts with excess H+to form NH4Cl in 18% yield, and with MeOTf at room temperature to yield the dimethyl hydrazido complex[K2{Tm(OSi(OtBu)3)3}2(μ-(CH3)NN(CH3))] (3). Protonolysis of3yields MeHN-NMeH·2HCl in 18 % yield.

Open-vessel polymerization of N-carboxyanhydride (NCA) for polypeptide synthesis.

Synthetic polypeptides, also known as poly(α-amino acids), have the same polyamide backbone structures as natural proteins and peptides. As an important class of biomaterials, polypeptides have been widely used because of their biocompatibility, bioactivity and biodegradability. Ring-opening polymerization of N-carboxyanhydride (NCA) is a classical and widely used method for the synthesis of polypeptides. The dominantly used primary amine-initiated NCA polymerization can yield well-defined polymers and complex macromolecular architectures, but the reaction is slow and sensitive to moisture, making it necessary to use anhydrous solvents and a glovebox. One solution is to use lithium hexamethyldisilazide (LiHMDS) as the initiator, as described in this protocol. LiHMDS-initiated NCA polymerization is less sensitive to moisture and can be carried out in an open vessel outside the glovebox. It is also very fast; the reaction can be complete within 5 min to produce 30-mer polypeptides. In this protocol, poly(γ-benzyl-L-glutamate) is prepared as an example, but the protocol can easily be adapted to the synthesis of other polypeptides by generating NCAs from different amino acids, making it particularly suitable for the efficient parallel synthesis of polypeptide libraries. We provide detailed procedures for NCA synthesis and purification, the method of polymer end-group modification and measurement of polymerization kinetics and reactivity ratio. The procedure for synthesis of monomers and polymerization to form polypeptides requires <1 d. The superfast and open-vessel NCA polymerization method described here will probably enable a wide range of applications in the synthesis and functional study of polypeptide biomaterials.

A Transient Iron Carbide Generated by Cyaphide Cleavage.

Despite their potential relevance as molecular models for industrial and biological catalysis, well-defined mononuclear iron carbide complexes are unknown, in part due to the limited number of appropriate C1 synthons. Here, we show the ability of the cyaphide anion (C≡P-) to serve as a C1 source. The high spin (S = 2) cyaphide complex PhB(tBuIm)3Fe-C≡P (PhB(tBuIm)3- = phenyl(tris(3-tert-butylimidazol-2-ylidene)borate) is readily accessed using the new cyaphide transfer reagent [Mg(DippNacNac)(CP)]2 (DippNacNac = CH{C(CH3)N(Dipp)}2 and Dipp = 2,6-di(iso-propyl)phenyl). Phosphorus atom abstraction is effected by the three-coordinate Mo(III) complex Mo(NtBuAr)3 (Ar = 3,5-Me2C6H3), which produces the known phosphide (tBuArN)3Mo≡P along with a transient iron carbide complex PhB(tBuIm)3Fe≡C. Electronic structure calculations reveal that PhB(tBuIm)3Fe≡C adopts a doublet ground state with nonzero spin density on the carbide ligand. While isolation of this complex is thwarted by rapid dimerization to afford the corresponding diiron ethynediyl complex, the carbide can be intercepted by styrene to provide an iron alkylidene.

A Well-Defined Magnesium Complex of C70 6.

Controlling and understanding charge state and metal coordination in carbon nanomaterials is crucial to harnessing their unique properties. Here we describe the synthesis of the well-defined fulleride complex [{(Mesnacnac)Mg}6C70], 2, (Mesnacnac)=HC(MeCNMes)2, Mes=2,4,6-Me3C6H2, from the reaction of the β-diketiminate magnesium(I) complex [{(Mesnacnac)Mg}2] with C70 in aromatic solvents. The molecular structure of complex 2 was determined, providing the first high-quality structural study of a complex with the C70 6- ion. In combination with solution state NMR spectroscopic and DFT computational studies, the changes in geometry and charge distribution in the various atom and bond types of the fulleride unit were investigated. Additionally, the influence of the (Mesnacnac)Mg+ cations on the global and local fulleride coordination environment was examined.

Well-Defined Highly-Coordinated Copper(III) Iodide and Pincer Tris(trifluoromethyl)copper Complexes.

Copper(III) iodide and bromide complexes representing a unique combination of highly-coordinated metal and soft polarizable anions were synthesized and fully characterized, including X-ray crystallography. Ligand substitution in well-defined highly-coordinated copper complex PyCu(CF3)3 with pincer ligands was achieved to give formally octahedral copper(III) complexes.

Isolation and Crystallographic Characterization of an Octavalent Co2O2 Diamond Core.

High-valent cobalt oxides play a pivotal role in alternative energy technology as catalysts for water splitting and as cathodes in lithium-ion batteries. Despite this importance, the properties governing the stability of high-valent cobalt oxides and specifically possible oxygen evolution pathways are not clear. One root of this limited understanding is the scarcity of high-valent Co(IV)-containing model complexes; there are no reports of stable, well-defined complexes with multiple Co(IV) centers. Here, an oxidatively robust fluorinated ligand scaffold enables the isolation and crystallographic characterization of a Co(IV)2-bis-μ-oxo complex. This complex is remarkably stable, in stark contrast with previously reported Co(IV)2 species that are highly reactive, which demonstrates that oxy-Co(IV)2 species are not necessarily unstable with respect to oxygen evolution. This example underscores a new design strategy for highly oxidizing transition-metal fragments and provides detailed data on a previously inaccessible chemical unit of relevance to O-O bond formation and oxygen evolution.

Asymmetric Clicking of Alkynyl Dipolarophiles and Nitrones Catalyzed by a Well-Defined Chiral Iron Complex

Asymmetric Clicking of Alkynyl Dipolarophiles and Nitrones Catalyzed by a Well-Defined Chiral Iron Complex

Computational 3D Models of Fe2+/3+-Aβ1-42 Complexes Associated with Alzheimer's Disease.

The interaction between iron and amyloid-beta (Aβ) peptides has received significant attention in Alzheimer's disease (AD) research due to its potential implications in developing this pathology. However, the coordination preferences of iron and Aβ1-42 have not been thoroughly investigated or remain unknown. This study employs a computational protocol that combines homology modeling techniques with quantum mechanics (DTF-xTB) calculations to build and evaluate several 3D models of Fe2+/3+-Aβ1-42. Our results reveal well-defined complexes for both the metal and peptide moieties, and we discuss the molecular interactions stabilizing these complexes by elucidating the coordinating environments and binding preferences. These proposed models offer valuable insights into the role of iron in Alzheimer's disease (AD) pathology.

Dyotropic Rearrangement of an Iron-Aluminium Complex.

Ligand exchange processes at metal complexes underpin their reactivity and catalytic applications. While mechanisms of ligand exchange at single site complexes are well established, occurring through textbook associative, dissociative and interchange mechanisms, those involving heterometallic complexes are less well developed. Here we report the reactions of a well-defined Fe-Al dihydride complex with exogenous ligands (CO and CNR, R=Me, tBu, Xyl=2,6-Me2C6H3). Based on DFT calculations we suggest that these reactions occur through a dyotropic rearrangement, this involves initial coordination of the exogenous ligand at Al followed by migration to Fe, with simultaneous migration of a hydride ligand from Fe to Al. Such processes are rare for heterometallic complexes. We study the bonding and mechanism of the dyotropic rearrangement through in-depth computational analysis (NBO, IBOs, CLMO analysis, QTAIM, NCIplot, IGMH), shedding new light on how the electronic structure of the heterometallic core responds to the migration of ligands between metal sites. The dyotropic rearrangement fundamentally changes the nature of the hydride ligands, exposing new nucleophilic reactivity as evidenced by insertion reactions with CO2, isocyanates, as well as isocyanides.

Catalytic Nitrogen Fixation Using Well-Defined Molecular Catalysts under Ambient or Mild Reaction Conditions.

Ammonia (NH3) is industrially produced from dinitrogen (N2) and dihydrogen (H2) by the Haber-Bosch process, although H2 is prepared from fossil fuels, and the reaction requires harsh conditions. On the other hand, microorganisms have fixed nitrogen under ambient reaction conditions. Recently, well-defined molecular transition metal complexes have been found to work as catalyst to convert N2 into NH3 by reactions with chemical reductants and proton sources under ambient reaction conditions. Among them, involvement of both N2-splitting pathway and proton-coupled electron transfer is found to be very effective for high catalytic activity. Furthermore, direct electrocatalytic and photocatalytic conversions of N2 into NH3 have been recently achieved. In addition to catalytic formation of NH3, selective catalytic conversion of N2 into hydrazine (NH2NH2) and catalytic silylation of N2 into silylamines have been reported. Catalytic C-N bond formation has been more recently established to afford cyanate anion (NCO-) under ambient reaction conditions. Further development of direct conversion of N2 into nitrogen-containing compounds as well as green ammonia synthesis leading to the use of ammonia as an energy carrier is expected.

Well-defined nanomagnetic nitrilotriacetic acid complex of Cu(ii) supported on silica-coated nanosized magnetite: a new highly efficient and magnetically separable catalyst for C-N bond formation.

A nitrilotriacetic acid (NTA) complex of Cu(ii) supported on silica-coated nanosized magnetite Fe3O4@SiO2-Pr-DEA-[NTA-Cu(ii)]2 was prepared as a new well-defined magnetically separable nanomaterial and fully characterized via IR, XRD, FESEM, TEM, TGA, DLS, BET, VSM, solid-state UV-vis spectroscopy, EDX, ICP-OES, and FESEM-EDX map analyses. Thereafter, it was successfully applied as a new easily magnetically separable and reusable heterogeneous nanocatalyst for the Buchwald-Hartwig C-N bond formation reaction in DMF at 110 °C. Using this method, various kinds of nitrogen heterocycles, such as imidazoles, 2-methyl-1H-imidazole, benzimidazole, indole, and 10H-phenothiazine as well as aliphatic secondary amines such as piperidine, piperazine, morpholine, dimethylamine, and diethylamine, were reacted with aryl halide compounds, and the desired products were obtained with good to excellent yields. In all cases, the applied catalyst could be recovered easily and rapidly using an external magnet and reused 7 times without significant loss of catalytic activity.

Terminal Hydride Complex of High-Spin Mn.

The iron-molybdenum cofactor of nitrogenase (FeMoco) catalyzes fixation of N2 via Fe hydride intermediates. Our understanding of these species has relied heavily on the characterization of well-defined 3d metal hydride complexes, which serve as putative spectroscopic models. Although the Fe ions in FeMoco, a weak-field cluster, are expected to adopt locally high-spin Fe2+/3+ configurations, synthetically accessible hydride complexes featuring d5 or d6 electron counts are almost exclusively low-spin. We report herein the isolation of a terminal hydride complex of four-coordinate, high-spin (d5; S = 5/2) Mn2+. Electron paramagnetic resonance and electron-nuclear double resonance studies reveal an unusually large degree of spin density on the hydrido ligand. In light of the isoelectronic relationship between Mn2+ and Fe3+, our results are expected to inform our understanding of the valence electronic structures of reactive hydride intermediates derived from FeMoco.

Nitrogen Fixation by Manganese Complexes - Waiting for the Rush?

Manganese is currently experiencing a great deal of attention in homogeneous catalysis as a sustainable alternative to platinum group metals due to its abundance, affordable price and low toxicity. While homogeneous nitrogen fixation employing well-defined transition metal complexes has been an important part of coordination chemistry, manganese derivatives have been only sporadically used in this research area. In this contribution, the authors systematically cover manganese organometallic chemistry related to N2 activation spanning almost 60 years, identify apparent pitfalls and outline encouraging perspectives for its future development.

Robust cobalt catalysts with N,N-bidentate aldimine imidazolidine-2-imine/guanidine ancillary ligand for isoprene polymerization

A new family of well-defined cobalt complexes (Co1–Co7) bearing N,N-bidentate chelate aldimine imidazolidine-2-imine/guanidine ancillary ligands were designed and successfully synthesized. All of the target metal complexes were structurally characterized by single-crystal X-ray diffraction analysis. It revealed that the Co atom adopted distorted tetrahedral coordination geometry and formed a unique six-membered chelate ring which exhibited structural distinctions with traditional N^N-based α-diimine and β-diimine Co complexes. In combination with a very low amount of Et2AlCl (as low as 50 equiv.), these Co complexes exhibited high activity (up to 99 % yield within 6 hrs) and good thermal stability (up to 80 °C) in the coordination polymerizations of isoprene to afford cis-1,4/3,4-polyisoprenes with adjustable molecular weights Mn (25.9–138.4 kg/mol) and cis-1,4 contents (64.7–73.3 %). The different substituents on these Co catalysts also exerted influence on catalytic behaviors, chain microstructures, and polymer properties. This study represents the first example of imidazolidine-imine/guanidine analog ligated Cobalt complexes for the polymerization of isoprene.

Understanding the Remarkable Stability of Well-Defined Dinuclear Copper(I) Carbene Complexes.

The synthesis of a well-defined dicopper carbene complex supported by the PNNP (2,7-bis(di-tert-butylphosphaneyl)methyl-1,8-naphthyridine) expanded pincer ligand is reported. This carbene complex is remarkably stable, even in the presence of air and water. The reactivity of this complex was explored towards typical carbene transfer substrates and its electronic structure was investigated. Using a combination of experiments and DFT calculations, the principles that underly the stability of dinuclear carbene complexes are probed.

Well-Defined Low-Valent Cobalt Complexes in Catalysis: An Overview

Well-Defined Low-Valent Cobalt Complexes in Catalysis: An Overview

Vinylic C-H Activation of Styrenes by an Iron-Aluminum Complex.

The oxidative addition of sp2 C-H bonds of alkenes to single-site transition-metal complexes is complicated by the competing π-coordination of the C═C double bond, limiting the examples of this type of reactivity and onward applications. Here, we report the C-H activation of styrenes by a well-defined bimetallic Fe-Al complex. These reactions are highly selective, resulting in the (E)-β-metalation of the alkene. For this bimetallic system, alkene binding appears to be essential for the reaction to occur. Experimental and computational insights suggest an unusual reaction pathway in which a (2 + 2) cycloaddition intermediate is directly converted into the hydrido vinyl product via an intramolecular sp2 C-H bond activation across the two metals. The key C-H cleavage step proceeds through a highly asynchronous transition state near the boundary between a concerted and a stepwise mechanism influenced by the resonance stabilization ability of the aryl substituent. The metalated alkenes can be further functionalized, which has been demonstrated by the (E)-selective phosphination of the employed styrenes.

Exploiting Organometallic Chemistry to Functionalize Small Cuprous Oxide Colloidal Nanocrystals.

The ligand chemistry of colloidal semiconductor nanocrystals mediates their solubility, band gap, and surface facets. Here, selective organometallic chemistry is used to prepare small, colloidal cuprous oxide nanocrystals and to control their surface chemistry by decorating them with metal complexes. The strategy is demonstrated using small (3-6 nm) cuprous oxide (Cu2O) colloidal nanocrystals (NC), soluble in organic solvents. Organometallic complexes are coordinated by reacting the surface Cu-OH bonds with organometallic reagents, M(C6F5)2, M = Zn(II) and Co(II), at room temperature. These reactions do not disrupt the Cu2O crystallinity or nanoparticle size; rather, they allow for the selective coordination of a specific metal complex at the surface. Subsequently, the surface-coordinated organometallic complex is reacted with three different carboxylic acids to deliver Cu-O-Zn(O2CR') complexes. Selective nanocrystal surface functionalization is established using spectroscopy (IR, 19F NMR), thermal gravimetric analyses (TGA), transmission electron microscopy (TEM, EELS), and X-ray photoelectron spectroscopy (XPS). Photoluminescence efficiency increases dramatically upon organometallic surface functionalization relative to that of the parent Cu2O NC, with the effect being most pronounced for Zn(II) decoration. The nanocrystal surfaces are selectively functionalized by both organic ligands and well-defined organometallic complexes; this synthetic strategy may be applicable to many other metal oxides, hydroxides, and semiconductors. In the future, it should allow NC properties to be designed for applications including catalysis, sensing, electronics, and quantum technologies.

The synthesis and characterization of an iron(VII) nitrido complex

Complexes of iron in high oxidation states are captivating research subjects due to their pivotal role as active intermediates in numerous catalytic processes. Structural and spectroscopic studies of well-defined model complexes often provide evidence of these intermediates. In addition to the fundamental molecular and electronic structure insights gained by these complexes, their reactivity also affects our understanding of catalytic reaction mechanisms for small molecule and bond-activation chemistry. Here, we report the synthesis, structural and spectroscopic characterization of a stable, octahedral Fe(VI) nitrido complex and an authenticated, unique Fe(VII) species, prepared by one-electron oxidation. The super-oxidized Fe(VII) nitride rearranges to an Fe(V) imide through an intramolecular amination mechanism and ligand exchange, which is characterized spectroscopically and computationally. This enables combined reactivity and stability studies on a single molecular system of a rare high-valent complex redox pair. Quantum chemical calculations complement the spectroscopic parameters and provide evidence for a diamagnetic (S = 0) d2 Fe(VI) and a genuine S = 1/2, d1 Fe(VII) configuration of these super-oxidized nitrido complexes.