Welder's Pneumoconiosis Research Articles

Analysis of disease burden of welder's pneumoconiosis in Jiangsu Province

Objective: To investigate the current status of disease burden and its influencing factors among welder's pneumoconiosis patients, and provide scientific basis for taking targeted intervention measures. Methods: From June 2022 to June 2023, the patients with welder's pneumoconiosis in Jiangsu Province were selected from 1956 to 2020 as the research objects, and disability adjusted life years (DALY) were used as the comprehensive index to study the disease burden. The direct and indirect economic losses caused by the diseases were calculated, and the factors affecting the disease burden were discussed by multiple linear regression method. Results: A total of 974 cases of welder's pneumoconiosis were reported in Jiangsu Province, the cumulative loss of DALY was 6300.73 person-years, and the per capita loss was 6.47 person-years. Among them, the healthy life years lost due to disability (YLD) was 6156.50 person-years (97.71%) , and the healthy life years lost due to premature death (YLL) was 144.23 person-years (2.29%) . Multiple linear regression analysis showed that the main factors affecting DALY were disability grade, diagnostic age, pneumoconiosis grade and length of dust exposure (P<0.05) . The total economic loss caused by 974 welder's pneumoconiosis patients was 1831838160.18 yuan, and the per capita loss was 1880737.33 yuan. Among them, the direct economic loss was 970917563.75 yuan (53.00%) , and the indirect economic loss was 860920596.43 yuan (47.00%) . Conclusion: Welder's pneumoconiosis causes serious disease burden to patients, and at the same time causes huge economic losses to individuals and society, which seriously hinders the development of society. Taking effective control measures to prevent the incidence of welder's pneumoconiosis is the key to reduce the disease burden.

Pathological features and diagnostic significance of lung biopsy in occupational lung diseases

Objective: To investigate the clinicopathological characteristics of occupational lung diseases, to reduce the missed diagnoses and misdiagnoses of the diseases and to help standardize the diagnosis and treatment of these patients. Methods: A total of 4 813 lung biopsy specimens (including 1 935 consultation cases) collected at the Department of Pathology, Nanjing Drum Tower Hospital, Nanjing, China from January 1st, 2017 to December 31th, 2019 were retrospectively analyzed. Among them, 126 cases of occupational lung diseases were confirmed with clinical-radiological-pathological diagnosis. Special staining, PCR and scanning electron microscopy were also used to rule out the major differential diagnoses. Results: The 126 patients with occupational lung diseases included 102 males and 24 females. All of them had a history of exposure to occupational risk factor(s). Morphologically, 68.3% (86/126) of the cases mainly showed pulmonary fibrotic nodules, dust plaque formation or carbon end deposition in pulmonary parenchyma. 16.7% (21/126) of the cases mainly showed welding smoke particle deposition in the alveolar cavity and lung interstitium while 15.1% (19/126) of the cases showed granulomas with fibrous tissue hyperplasia, alveolar protein deposition or giant cell interstitial pneumonia. The qualitative and semi-quantitative analyses of residual dust components in the lung under scanning electron microscope were helpful for the diagnosis of welder's pneumoconiosis and hard metal lung disease. Conclusions: The morphological characteristics of lung biopsy tissue are important reference basis for the clinicopathological diagnosis and differential diagnosis of occupational lung diseases. Recognizing the characteristic morphology and proper use of auxiliary examination are the key to an accurate diagnosis of occupational lung diseases on biopsy specimens.

Survival and Disease Burden Analysis of Occupational Pneumoconiosis From 1956 to 2021 in Jiangsu Province.

The aims of the study are to investigate the survival status and its influencing factors of pneumoconiosis patients and to analyze the disease burden and its trend in Jiangsu Province. We used the life table and Cox model to analyze the survival status. The disease burden and its temporal trend were examined using the disability-adjusted life years (DALY). The average survival time was 16.22 ± 10.11 years. First diagnosis age, first diagnosis stage, and upgrade of stages were crucial risk factors for the survival. The cumulative DALY was 154,500.83 person-years. The DALY attributed to silicosis, coal worker pneumoconiosis, and welder's pneumoconiosis were 99,806.72 (64.60%), 35,483.21 (22.97%), and 37,85.83 (2.45%) person-years, respectively. Although the disease burden of pneumoconiosis is decreasing because of the implementation of relevant health policies and improved medical standards, the prevention and control of pneumoconiosis still need greater attention.

Survival analysis of 15,402 pneumoconiosis cases in Jiangsu Province of China from 1961 to 2019.

Pneumoconiosis has been reported as one of the major global burdens of occupational health-related diseases. The global prevalence had increased since 1990. Prevention and treatment of pneumoconiosis in the project of occupational health have been a priority of the action plan of Healthy China 2030. A life table was used to explore the survival and fatality rate of pneumoconiosis. Using Cox proportional hazards regression model, the factors of survival time were investigated. A total of 15,402 cases had several species of pneumoconiosis, including silicosis, coal worker pneumoconiosis and welder pneumoconiosis that accounted for 68.49%, 19.41% and 3.84% of total pneumoconiosis, respectively. Eighty percent of cases were initially diagnosed at stage I, 15.5% at stage II, and 4.5% at stage III. The overall average survival time was determined as 14.74±9.57 years, the life expectancy reached 34.324 years in total, and the total mortality of patients suffering from pneumoconiosis was 19.89%. The average dust exposure period, average survival time and life expectancy progressively decreased with the stage upgrade, whereas the age of onset and mortality rate tended to increase. Dust exposure years, initially diagnosed at stage II or stage III, stage I upgrade to stage II, stage I upgrade to stage III and low economic level were found as important risk factors for the survival of patients suffering from pneumoconiosis. Stage II and stage III of pneumoconiosis may have a direct effect on the survival time of patients suffering from pneumoconiosis. The prevention and delay of the progression of pneumoconiosis are critical to prolonging the survival time of cases.

Analysis of incidence characteristics and trend of pneumoconiosis in Ningbo City from 1967 to 2019

Objective: To understand the incidence of pneumoconiosis in Ningbo city from 1967 to 2019, and to analyze the distribution characteristics and change trend of pneumoconiosis. Methods: In February 2021, the data of pneumoconiosis patients in Ningbo city from 1967 to 2019 were sorted out. The data from 1967 to 1987 were from historical case files of Zhejiang Center for Disease Control and Prevention, the data from 1988 to 2005 were from the historical case files of Ningbo Center for Disease Control and Prevention, and the data from 2006 to 2019 were from the pneumoconiosis report card in China Disease Prevention and Control Information System; Followed up and supplement relevant information, including basic information, basic information of employers and information related to pneumoconiosis diagnosis, and comprehensively analyze the composition and development trend, population characteristics and industry characteristics of pneumoconiosis. Results: From 1967 to 2019, a total of 1715 cases of pneumoconiosis were reported in Ningbo City, including 1254 cases of stageⅠpneumoconiosis, 258 cases of stageⅡpneumoconiosis, 172 cases of stage Ⅲpneumoconiosis. 1202 cases of silicosis (70.09%) , 296 cases of asbestosis (17.26%) , 40 cases of welder's pneumoconiosis (2.33%) , 32 cases of graphite pneumoconiosis (1.87%) were reported. There were 1296 male cases (75.57%) and 419 female cases (24.43%) were reported. Silicosis (91.15%, 1102/1209) and welder's pneumoconiosis (100.00%, 40/40) were the most common pneumoconiosis in males, while asbestosis (90.24%, 268/297) and graphite pneumoconiosis (87.50%, 28/32) were the most common pneumoconiosis in females. The average age was (49.71±10.90) years old and the average length of service was (10.98±6.96) years. The top three reported pneumoconiosis cases were construction industry (336 cases, 19.59%) , ferrous metal smelting and rolling industry (317 cases, 18.48%) and non-metallic mineral products industry (315 cases, 18.37%) . The top three reported pneumoconiosis cases were 414 cases (24.14%) in Ninghai County, 294 cases (17.14%) in Yuyao City and 272 cases (15.86%) in Yinzhou District. Conclusion: With the development of industries in Ningbo City, government departments should strengthen supervision and management of enterprises involving silica dust and welding fume to curb the high incidence of pneumoconiosis.

A retrospective investigation of new cases of pneumoconiosis from 1958 to 2018 in Guangzhou City

Objective: To describe the characteristics and the survival status of pneumoconiosis cases reported in Guangzhou City from 1958 to 2018, and to investigate the epidemiological trends of pneumoconiosis. This study is aiming to provide basic data for formulating the guidelines and policies for control of pneumoconiosis, and for evaluating the control effects of pneumoconiosis. Methods: From July 2019 to January 2020, based on the data collected in the pneumoconiosis case cards and database as well as the retrospective follow-up investigate of pneumoconiosis cases, we conducted a descriptive analysis for all the new cases of pneumoconiosis reported from 1958 to 2018 in Guangzhou City. The statistical indices included the number of new pneumoconiosis cases in each decade, types of pneumoconiosis, regional and industrial distributions, survival status, and the change tendency of the diagnosis age and the dust exposure time of pneumoconiosis cases. Results: From 1958 to 2018, a total of 1194 new cases of pneumoconiosis were reported in Guangzhou City, including 1147 males (96.1%) and 47 females (3.9%) . Silicosis (60.1%, 718/1194) and welder's pneumoconiosis (21.5%, 257/1194) were the main types of pneumoconiosis. The top three districts for reporting new cases were Huangpu District (29.0%, 346/1194) , Nansha District (12.6%, 151/1194) and Baiyun District (11.1%, 132/1194) , respectively. The top three industries for reporting new cases were civil engineering construction industry (25.0%, 298/1194) , railway ship aerospace and other transportation equipment manufacturing industry (16.1%, 192/1194) and non-metal mining industry (15.7%, 187/1194) . The diagnosis age for new cases was 47.8 (23.6-79.1) years old, and the dust exposure time was 12.3 (0.4-49.1) years. Both of these two statistical indicators rose first and fell later from 1958 to 2018. As of December 31, 2019, a total of 963 new cases of pneumoconiosis were followed up, of which 467 (48.5%) survived, mainly silicosis (41.3%, 193/467) and welder's pneumoconiosis (43.3%, 203/467) . 496 cases (51.5%) died, and the age of death was 69.9 (32.4-96.9) years old. Conclusion: According to the epidemiological characteristics of pneumoconiosis in Guangzhou, we should focus on key districts and industries in the prevention and control of pneumoconiosis. Besides, the staffs in the occupational disease diagnosis institutions should try the best to collect the complete dust exposure data of new cases of pneumoconiosis. Moreover, the health administrative departments should pay more attention to the management of pneumoconiosis death case reports.

Investigation on occupational hazards in 20 automobile manufacturing enterprises in Shandong Province

Objective: To investigate the current situation of occupational hazards in automobile manufacturing enterprises in Shandong Province. Methods: From February to May 2019, the convenience sampling method was adopted to conduct on-site occupational health surveys with 20 automobile manufacturing enterprises in Shandong Province as the survey subjects, to detect the occupational hazard factors in the workplaces and individual exposure levels, and to analyze the occupational health check results of operators. Results: There were 13 small-sized, 4 medium-sized and 3 large-sized enterprises among the 20 automobile manufacturing enterprises. The detection results of benzene and toluene in the workplaces met the occupational exposure limits, and the detection results of welding fumes, manganese and its compounds, and xylene exceed the occupational exposure limits. The maximum short-term exposure concentration (C(STE)) of welding fume in the air of workplaces was 24.23 mg/m(3), and the over-standard rate was 11.0% (16/146) . The maximum time-weighted average concentration (C(TWA)) of welding fume of operators is 10.60 mg/m(3), and the over-standard rate was 11.0% (8/73) . The maximum C(STE) of manganese and its compounds in the air of workplaces was 0.879 mg/m(3), and the of manganese and its compounds of operators was 0.175 mg/m(3), and the over-standard rate was 5.7% (4/70) . The maximum xylene C(STE) in the air of workplaces was 230.00 mg/m(3), and the over-standard rate was 3.9% (2/51) . The maximum xylene C(TWA) of operators was 70.40 mg/m(3), the over-standard rate was 3.6% (1/28) . Among the 4775 workers exposed to occupational hazards, 38 (0.80%) were suspected of electric welder's pneumoconiosis, 27 (0.57%) were suspected of manganese poisoning and 31 (0.65%) were suspected of chronic low-concentration benzene and benzene series poisoning. The detection rates of suspected occupational diseases among workers in small and medium-sized enterprises were relatively high, 2.86% (30/1048) and 4.51% (51/1132) respectively. There was a statistically significant difference in the detection rates of suspected occupational diseases among the operators of different scale automobile manufacturers (P<0.05) . Conclusion: The exposure levels of electric welding fumes, manganese and its compounds in welding jobs and xylene exposure levels in spray painting jobsin Shandong Province's automobile manufacturing enterprises are more serious. The supervision and management of occupational hygiene should be strengthened, the working environment should be improved, and the health of welding and painting workers should be protected.

Research progress on the effects of welding fumes exposure on lung

Welding is an important industrial activity worldwide which involving millions of practitioners. Due to the influence of welding method, welding dust concentration, ventilation, weather and other factors, the exposure of the welder is different. And resulting in different respiratory symptoms, including decreased lung function, welder's pneumoconiosis and even lung cancer, which seriously affects the life quality of the worker. Through referring to literatures, the research status of welding dust and respiratory diseases was summarized to provide direction for future research.

The algorithm of morphological diagnosis of dusty lesions of the lungs in tumors according to resection data

Introduction. The growth of environmentally caused respiratory diseases is an urgent problem of respiratory medicine. The Sverdlovsk region is a large diversified industrial center, which determines the high level of dust pathology in the region. At the same time, many questions of nosological verification of dusty lung lesions remain insufficiently studied.The aim of the study is to determine the structure of dust pathology and to develop criteria for morphological diagnosis of dust lesions of the respiratory organs on the material of lung resections in tumors.Materials and methods. The work is based on the study of the pathomorphology of dust lesions of the respiratory organs in 315 cases of resections of the lungs and intra-thoracic lymph nodes in patients with primary lung cancer operated in the Thoracic Surgery Clinic of the Sverdlovsk regional anti-tuberculosis dispensary. Macroscopic and histological examination of the surgical material of the lungs and lymph nodes was carried out; polarizing microscopy was performed in all cases to identify anisotropic structures in dust clusters. In complex cases of expert evaluation, the most effective and reliable method scanning electron microscopy with x-ray spectral microanalysis-was used to study the elemental composition of dust in lung and lymph node tissue.Results. Dust lesions of the respiratory organs were detected in almost all cases and are represented by non-professional dustchanges associated with smoking, household anthracoconiosis and dust lesions of a professional nature (pneumoconiosis). The frequency of dust lesions is determined and the criteria for morphological diagnostics of household and professional dust lesions are formulated. It is shown that in most cases, when examining surgical material for lung cancer, signs of “combined dusting” are detected, including morphological manifestations of pneumoconiosis of professional and household nature. Pneumoconiosis of a professional nature was detected in 34 (10.8%) cases in the presence of the corresponding dust experience in the history. On the resection material found morphological signs of silicosis and anthracosilicosis (5 cases, 1.6%), electric welder pneumoconiosis (13 cases, 4.2%), bauxite pneumoconiosis (8 cases, 2.5%), pneumoconiosis caused by titanium dust (2 cases, 0.6%), pneumoconiosis caused by exposure to mixed dust (6 cases, 1.9%) were found on the resection material. Asbestos-associated lesions were morphologically determined in 3 cases (2.2%). Attention is drawn to the relatively high frequency of bauxite pneumoconiosis, whose morphological criteria for diagnosis, including color features of anisotropy, are presented almost for the first time.Conclusions. The “Algorithm of morphological diagnostics of dust lesions of the respiratory organs in lung tumors” has been developed. It should be emphasized that the morphological of pneumoconiosis requires clinical and radiological comparisons and mandatory confirmation by professional pathologists. Thus, the diagnosis of dust pathology of the lungs according to resections should be the result of joint multidisciplinary work of doctors of various specialties.

Results analysis of occupational physical examination for major occupational hazards exposed laborer in 2018 in Guangzhou

Objective: To analyze the results of occupational physical examination for major occupational hazard exposed laborer in 2018 in Guangzhou, to provide scientific basis for occupational health supervise. Methods: In January 2019, descriptive epidemiological methods were used as the data sources of the Occupational Disease and Occupational Health Information Surveillance System and the report data of Guangzhou Occupational Health Inspection Agency, collecting 2733 employers from 28 Occupational Health Inspection Organizations in 11 administrative regions of Guangzhou from January to December 2018, as well as the occupational health examination data of 97688 workers exposed to the occupational-disease-risk factors, to analyze the inspection of suspected occupational diseases and contraindications during the period of work of the workers who were monitored for the occupational hazard factors (silicon dust, welding fume, benzene, lead, Ethylene Dichloride, N-hexane, high temperature and hand-transmitted vibration) . Results: Total 128 cases of suspected occupational disease were detected, including 3 suspected silicosis, 8 suspected welder＇s pneumoconiosis, 17 suspected other pneumoconiosis, 10 suspected benzene poisoning, 1 suspected lead poisoning and 89 suspected noise deafness. There were 2061 cases of occupational contraindication, among which 550 cases were contraindication of high temperature, 261 cases were benzene and 1089 cases were noise. Conclusion: The Occupational Health Inspection Institution of this city should continuously monitor the occupational health status of the harmful workers during their work, do a good job of prevention, and strengthen the labor protection.

A case of welder's pneumoconiosis misdiagnosed as extrinsic allergic alveolitis

A case of welder's pneumoconiosis misdiagnosed as extrinsic allergic alveolitis

Clinical and high-resolution computed tomography characteristics of the welder's pneumoconiosis

To investigate the clinical and high-resolution computed tomography (HRCT) features of the welder's pneumoconiosis. A total of 10 patients diagnosed by bronchoscopy and pathology from January 2010 to January 2015 in Nanjing Drum Tower Hospital were recruited in this study, and the clinical manifestations, pulmonary function tests, pathology and HRCT data were collected and analyzed retrospectively. Ten patients all had welder's occupational history for 5-30 years, with the main clinical manifestations of cough, sputum production, chest tightness and other symptoms. And the ratio of forced expiratory volume in one second and forced vital capacity (FEV1/FVC) of 4 patients was lower than 75.0% in the pulmonary function tests. Transbronchial lung biopsy specimen showed numerous hemosiderin-laden macrophages within the alveolar space, associated with positive iron staining. In welder's pneumoconiosis, small centrilobular nodules (10 cases) were frequently seen on HRCT in bilateral lung fields, with branching linear structures or the tree buds like shadows in 7 cases; 3 patients also showed areas of ground-glass attenuation. And the patients were misdiagnosed as tuberculosis (1/10), interstitial pneumonia (3/10), allergic alveolitis (1/10), diffuse lung disease (2/10), and vasculitis (1/10). Clinical manifestations of welder's pneumoconiosis are not specific; small centrilobular nodules are frequently seen on HRCT, with linear opacities or tree bud-like shadows.

Analyses on the characteristics and the trends of pneumoconiosis notified between 2001 and 2012 in Hebei Province

To describe the incidence, development and death of pneumoconiosis reported in Hebei from 2001 to 2012 and investigate the epidemiological trends and characteristics of pneumoconiosis to provide basic data for formulating the guidelines and policies for control of pneumoconiosis. The Hebei database of new cases of pneumoconiosis reposed from 2001 to 2012 were subjected to systematic arrangement. Clean data and descriptive analysis using SPSS 17.0. The statistical indices included number of new and death pneumoconiosis cases in each year. From 2001 to 2012 a total of 4558 new cases of pneumoconiosis were reported. The situation was same to coal-workers' pneumoconiosis and silicosis. (2) The pneumoconiosis cases were distributed mainly in the city of Tang Shan, Cheng De, Zhang Jia Kou and Han Dan (88.24%). (3) Most cases were centerred in coal industry, metallurgical industry, nonferrous metals industry, architectural material industry and light industry. (4) The mean age of onset in new cases was shorted each year for silicosis, coal-workers' pneumoconiosis, potter pneumoconiosis and electric welder pneumoconiosis, especially for 2010 to 2012 (9 years). (5) The work types of these cases mainly included drilling (26.72%), mining as the main work (6.67%), hybrid coal mine work (6.95%), molding worker (5.24%) and berterring worker (4.82%). (6) The new cases of pneumoconiosis reposed from 2001 to 2012 were diagnosissed I (3415, 74.92%), II (782, 17.16%), III (361, 7.92%). (7) The death cases of pneumoconiosis reposed from 2001 to 2012 were 1182, most of them were distributed mainly in the city of Tang Shan, Cheng De, Zhang Jia Kou and Han Dan (88.24%). The incidence of pneumoconiosis is still high: the new cases of pneumoconiosis is still rising. The mean age of onset in new cases was shorted each year. The new cases of pneumoconiosis reposed from 2001 to 2012 were diagnosed II was above 25%. The prevention and control of pneumoconiosis should be enhanced in key industries and for people engaging in key regions, industries, types of work according to the epidemiological characteristics of pneumoconiosis. Most cases were centerred in coal-workers' pneumoconiosis and silicosis.

Welders' siderosis: a retrospective cohort study on welder's pneumoconiosis patients with small round opacities on chest radiograph

To study the radiographycal changes and prognosis of welders' pneumoconiosis patients diagnosed within the last few years. Occupational hygienics data (including years on welding work, welding materials exposed to and work environment), symptoms, lung function test results and follow-up data of 136 welders' pneumoconiosis patients were collected retrospectively. The follow-up lasted up till June 30, 2014, with follow-up interval being one year. Chest radiographs were read/reviewed together by 3 senior experts experienced in pneumoconiosis diagnosing and shape and size of small opacity, overall profusion, affected lung zones and pneumoconiosis stages were all logged. Of all 136 pneumoconiosis cases, five were of stage II and 131 were stage I, and they had been engaged in welding work for 9.2±6.34 years. All patients were present with slight symptoms including coughing, chest distress and dyspnea, while their lung function remained normal. Small round opacities were found on chest radiographs of 88.9% of the 136 cases. Years of follow-up on 131 cases of stage I Welder's pneumoconiosis showed that irregular small opacities remained fundamentally unchanged, while small round opacities tended to gradually lessen instead of coalescence. Two years after primary diagnosing, the total affected lung zones of follow-up objects were noticed to start lessening, and reduced by 0.02 per patient among the 48 follow-up subjects. Of the 48 cases followed up up to six years after primary diagnosing, the affected lung zone number was reduced by 0.54 per patient while 4 cases (8%) went down to below stage I. As of the 36 patients followed up 10 years after after primary diagnosis, the number of affected lung areas decreased by 1.14, and 22% (8 cases) appeared less than stage I on chest radiograph. It seemed that the so-called welders' pneumoconiosis featuring small round opacities tended to get improved over time, which suggested the diagnosis of siderosis.

The level of welding fume and the healthy status of dust workers in electric welder's pneumoconiosis surveillance sentinel of one city

目的 了解南通市造船及船舶配套企业电焊烟尘的接触水平及其对接触人群健康状况影响.方法 2011年对8家造船及船舶配套企业进行职业卫生调查,对956名电焊作业人员进行了问卷调查和职业健康检查.结果 电焊烟尘超标率为32.80％.个体采样15个个体,9个个体超标,超标率为60.00％.定点检测49个点,12个点超标,超标率为24.50％.个体采样和定点采样电焊烟尘超标率的差异有统计学意义(P=0.02732,P＜O.05).956名电焊工中X线胸片异常69名,异常率为7.2％,未发现尘肺职业禁忌证或疑似职业病.第1秒用力呼气量(FEV10)/用力肺活量(FVC％)异常8人,异常率为1.88％.结论 电焊烟尘超标率较高,企业应采取有效的防尘措施,降低劳动者罹患职业病的风险。

Cadmium-induced renal tubular dysfunction in a group of welders

Occupational exposure to welding fumes has been associated with several diseases including metal fume fever, lung cancer, welder's pneumoconiosis and manganism. However, there are few reports on cadmium-induced renal tubular dysfunction in welders. To evaluate the body burden of cadmium and cadmium-induced proteinuria in a group of Chinese welders. Cadmium concentrations in the breathing zone and in urine were measured by atomic absorption spectrometry. β(2)-microglobulin (β(2)-MG) in urine as a marker of renal tubular function was measured using an ELISA kit. All urinary parameters were adjusted by urinary creatinine (Cr). A total of 103 welders participated. The concentration of airborne cadmium in the welders' breathing zones ranged from 5 to 86 μg/m(3), and 17% of samples exceeded the threshold limit value. Six welders' urinary cadmium levels exceeded the Chinese recommended reference value. Urinary β(2)-MG levels increased significantly with increasing urinary cadmium levels and in two welders, the values were close to the level for chronic cadmium poisoning in China. Environmental and urinary cadmium levels were raised in this group of welders and were associated with raised markers of renal tubular dysfunction. The exact source of the cadmium warrants further assessment.

Characteristics of 255 cases of electric welder's pneumoconiosis in one city

目的 探讨当前上海市电焊工尘肺发病特点.方法 以1999年1月1日至2008年12月31日上海市尘肺病诊断组初次诊断的电焊工尘肺共255例为研究对象,分析病例的发病工龄、发病年龄、所属行业、来源地、临床表现、影像表现、肺组织病理等.结果 1999至2008年上海市电焊工尘肺发病人数为255例,平均年龄(42.2±9.7)岁,平均工龄(17.2±9.4)年,占新发尘肺的28.7%.集装箱制造、机械制造和钢结构3个行业电焊工尘肺发病141例,占发病人数的55.3%,发病者年龄小,工龄短.63例外来工,占发病总人数的24.71%,其平均发病年龄(36.2±8.7)岁,平均工龄(9.8±6.5)年,均明显低于当地工人,差异有统计学意义(P＜0.01).电焊工尘肺胸片主要表现为全肺弥漫分布的密集度高、密度低的圆形小阴影,并且没有聚集趋势.结论 上海市电焊工尘肺发病呈现严重态势,应积极采取措施,减少粉尘接触,消除尘肺危害,保护工人健康。

Epidemiological investigation of welder's pneumoconiosis in two container manufacturing industries in Guangdong province

To investigate the incidence of welder's pneumoconiosis in container manufacturing industries in Guangdong province and present some preventive and curative strategy. Occupational epidemiology study methods were used to study the incidence of welder's pneumoconiosis in two container manufacturing enterprises (enterprise A and enterprise B). Before 2004, the rate of up-to-standard of weld fume concentration in the workplaces was relatively low (< or = 40%), and the maximum value of time weighted average (TWA) was 26.7 mg/m(3). After 2004, with the system of dust control, the rate of up-to-standard was 85% in the enterprise A. Of the 813 weld workers examined, 19 were diagnosed as welder's pneumoconiosis (stage I was 15, while I (+) was 4 ) and the incidence was 2.34% (19/813). The age of electric welders suffering from welder's pneumoconiosis and the duration of dust exposure were (33.45 + 4.64) and (8.04 + 1.97) years respectively. Chest radiographic examination showed mainly small round opacities "p". The value of MVV, FEF25%, FEF50% and FEF75% in lung function tests were significantly lower than those of the control group (P < 0.05 or P < 0.01). The main features of welder's pneumoconiosis in container manufacturing industries are the short duration of dust exposure, and small round opacities "p" in the chest radiographs. Therefore, it should be the key point of the prevention and treatment of occupational diseases in this industry to control the harmful weld fume.

Recovery from welding-fume-exposure-induced lung fibrosis and pulmonary function changes in sprague dawley rats.

Welder's pneumoconiosis has generally been determined as benign based on the absence of pulmonary function abnormalities in welders with marked radiographic abnormalities. Yet, there have also been several reports on welders with respiratory symptoms, indicating lung function impairment, X-ray abnormalities, and extensive fibrosis. Accordingly, this study attempted to investigate the inflammatory responses and pulmonary function changes in rats during a 60-day welding-fume-inhalation exposure period to elucidate the process of fibrosis. The rats were exposed to manual metal-arc stainless-steel welding fumes (MMA-SS) with total suspended particulate concentrations of 64.8 +/- 0.9 (low dose) and 107.8 +/- 2.6 mg/m3 (high dose) for 2 h per day in an inhalation chamber for 60 days. Animals were sacrificed after the initial 2-h exposure and after 15, 30, and 60 days, and the pulmonary function was also measured every week after the daily exposure. Elevated cellular differential counts were also measured in the acellular bronchoalveolar lavage fluid of the rats exposed to the MMA-SS fumes for 60 days. Among the pulmonary function test parameters, only the tidal volume showed a statistically significant and dose-dependent decrease after 35 to 60 days of MMA-SS welding-fume exposure. When the rats exposed to the welding fumes were left for 60 days to recover their lung function and cellular differentiation, recovery was observed in both the high and low-dose rats exposed up to 30 days, resulting in the disappearance of inflammatory cells and restoration of the tidal volume. The rats exposed for 60 days at the low dose also recovered from the inflammation and tidal volume loss, yet the rats exposed for 60 days at the high dose did not fully recover even after a 60-day recovery period. Therefore, when taken together, the results of the current study suggest that a decrease in the tidal volume could be used as an early indicator of pulmonary fibrosis induced by welding-fume exposure in Sprague Dawley rats, and fibrosis would seem to be preventable if the exposure is short-term and moderate.

On the X-ray Findings and Abnormalities of Pulmonary Function Among Welder's Pneumoconiosis

On the X-ray Findings and Abnormalities of Pulmonary Function Among Welder's Pneumoconiosis