Weightbearing CT Research Articles

FIRST METATARSAL ROTATION AFTER SCARF OSTEOTOMY FOR HALLUX VALGUS

IntroductionRecurrence after surgical correction of hallux valgus may be related to coronal rotation of the first metatarsal. The scarf osteotomy is a commonly used procedure for correcting hallux valgus but has limited ability to correct rotation. Using weightbearing computed tomography (WBCT), we aimed to measure the coronal rotation of the first metatarsal before and after a scarf osteotomy, and correlate these to clinical outcome scores.MethodsWe retrospectively analyzed 16 feet (15 patients) who had a WBCT before and after scarf osteotomy for hallux valgus correction. On both scans, hallux valgus angle (HVA), intermetatarsal angle, and anteroposterior/lateral talus-first metatarsal angle were measured using digitally reconstructed radiographs. Metatarsal pronation (MPA), alpha angle, sesamoid rotation angle and sesamoid position was measured on standardized coronal CT slices. Preoperative and postoperative(12 months) clinical outcome scores(MOxFQ and VAS) were captured.ResultsMean HVA was 28.6±10.1 degrees preoperatively and 12.1±7.7 degrees postoperatively. Mean IMA was 13.7±3.8 degrees preoperatively and 7.5±3.0 degrees postoperatively. Before and after surgery, there were no significant differences in MPA (11.4±7.7 and 11.4±9.9 degrees, respectively; p = 0.75) or alpha angle (10.9±8.0 and 10.7±13.1 degrees, respectively; p = 0.83). There were significant improvements in SRA (26.4±10.2 and 15.7±10.2 degrees, respectively; p = 0.03) and sesamoid position (1.4±1.0 and 0.6±0.6, respectively; p = 0.04) after a scarf osteotomy. There were significant improvements in all outcome scores after surgery. Poorer outcome scores correlated with greater postoperative MPA and alpha angles (r= 0.76 (p = 0.02) and 0.67 (p = 0.03), respectively).ConclusionA scarf osteotomy does not correct first metatarsal coronal rotation, and worse outcomes are linked to greater metatarsal rotation. Rotation of the metatarsal needs to be measured and considered when planning hallux valgus surgery. Further work is needed to compare postoperative outcomes with rotational osteotomies and modified Lapidus procedures when addressing rotation.

3D AUTOMATED VERSUS MANUAL ASSESSMENT OF ALIGNMENT IN NORMAL AND CAVUS FEET USING WEIGHT-BEARING CT SCANS: DOES IT DIFFER?

BackgroundThe complex deformities in cavovarus feet may be difficult to assess and understand. Weight-bearing CT (WBCT) is increasingly used to evaluate complex deformities. However, the bone axes may be difficult to calculate in the setting of severe deformity. Computer-assisted 3D-axis calculation is a novel approach that may allow for more accurate assessment of foot alignment / deformity. The aim of this study was to assess differences in measurements done manually on 2D slices of WBCT versus 3D computer models in normal and cavus feet.MethodsWe retrospectively analyzed WBCT scans from 16 normal and 16 cavus feet in patients with Charcot-Marie Tooth. Eight measurements were assessed: Talus-1st metatarsal angle (axial plane), Forefoot arch angle (coronal plane), and Meary's angle, calcaneal pitch, cuneiform to floor, cuneiform to skin, navicular to floor and navicular to skin distance (sagittal plane). 2D measurements were performed manually and 3D measurements were performed using specialised software (BoneLogic, DISIOR).ResultsThere was no significant difference in the measured variables (2D manual versus 3D automated) in normal feet. In the cavus group, 3D assessment calculated increased values for the sagittal angles: Meary's 7.3 degrees greater (p = 0.004), calcaneal pitch 2.4 degrees greater (p = 0.011)), and lower values for the axial talus-1st MT angle, 10.6 degrees less (p = 0.001).ConclusionThere were no significant differences in the normal group. This suggests 3D automated techniques can reliably assess the alignment of bony axes. However, the 3D axis calculations suggest there may be greater sagittal and lesser axial deformity in cavus feet than measured by 2D techniques. This discrepancy may be on account of the rotation seen in cavovarus feet, which may not be readily assessed manually. 3D automated measurements may therefore have a role in better assessing and classifying the cavus foot which may ultimately help inform treatment algorithms.

Development and validation of a fully automated tool to quantify 3D foot and ankle alignment using weight-bearing CT

IntroductionFoot and ankle alignment plays a pivotal role in human gait and posture. Traditional assessment methods, relying on 2D standing radiographs, present limitations in capturing the dynamic 3D nature of foot alignment during weight-bearing and are prone to observer error. This study aims to integrate weight-bearing CT (WBCT) imaging and advanced deep learning (DL) techniques to automate and enhance quantification of the 3D foot and ankle alignment. MethodsThirty-two patients who underwent a WBCT of the foot and ankle were retrospectively included. After training and validation of a 3D nnU-Net model on 45 cases to automate the segmentation into bony models, 35 clinically relevant 3D measurements were automatically computed using a custom-made tool. Automated measurements were assessed for accuracy against manual measurements, while the latter were analyzed for inter-observer reliability. ResultsDL-segmentation results showed a mean dice coefficient of 0.95 and mean Hausdorff distance of 1.41 mm. A good to excellent reliability and mean prediction error of under 2 degrees was found for all angles except the talonavicular coverage angle and distal metatarsal articular angle. ConclusionIn summary, this study introduces a fully automated framework for quantifying foot and ankle alignment, showcasing reliability comparable to current clinical practice measurements. This operator-friendly and time-efficient tool holds promise for implementation in clinical settings, benefiting both radiologists and surgeons. Future studies are encouraged to assess the tool's impact on streamlining image assessment workflows in a clinical environment.

Recommendation of minimal distal tibial length for long axis coordinate system definitions

Accurate anatomical coordinate systems for the foot and ankle are critical for interpreting their complex biomechanics. The tibial superior-inferior axis is crucial for analyzing joint kinematics, influencing bone motion analysis during gait using CT imaging and biplane fluoroscopy. However, the lack of consensus on how to define the tibial axis has led to variability in research, hindering generalizability. Even as advanced imaging techniques evolve, including biplane fluoroscopy and weightbearing CT, there exist limitations to imaging the entire foot together with the full length of the tibia. These limitations highlight the need to refine axis definitions. This study investigated various superior-inferior axes using multiple distal tibia lengths to determine the minimal field of view for representing the full tibia long-axis. Twenty human cadaver tibias were imaged and segmented to generate 3D bone models. Axes were calculated based on coordinate definitions that required user manual input, and a gold standard mean superior-inferior axis was calculated based on the population’s principal component analysis axis. Four manually calculated superior-inferior tibial axes groups were established based on landmarks and geometric fittings. Statistical analysis revealed that geometrically fitting a cylinder 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond, yielded the smallest angular deviation from the gold standard. From these findings, we recommend a minimum field of view that includes 1.5 times the mediolateral tibial width, starting 5 cm above the tibial plafond for tibial long-axis definitions. Implementing these findings will help improve foot and ankle research generalizability and impact clinical decisions.

Investigation of subtle Lisfranc injuries using weight-bearing computed tomography

Introduction: Lisfranc ligamentous injuries are common yet remain a diagnostic challenge. Automated analysis of weight-bearingcomputed tomography (WBCT) images has been investigated to diagnose various pathologies. However, it has not been studied forLisfranc ligament injuries. The objective of the study was to examine whether automated WBCT analysis could demonstrate diagnosticutility for these injuries. Methods: Serial sectioning of Lisfranc complex ligaments was conducted on 24 cadaveric limbs to simulate Lisfranc injuries. WBCT images were collected at each dissection condition under three loading conditions. Images were automatically segmented, and automated measures of specific angles and distances in the midfoot were calculated using digitally reconstructed radiographs. These were analyzed using repeated measures ANOVA and paired T-tests to identify significant differences between dissections at each loading condition. Results: Overall, minimal differences between dissection conditions were observed in automatically generated measures. Differences in axial angles of the metatarsals in severe dissections were observed, and there were fewer differences in angular measures across dissection conditions in fully loaded than unloaded conditions. Conclusions: Automated analysis of WBCT images may indicate severe Lisfranc ligamentous injury but is insufficient to diagnose ligament injuries without full capsule disruption. This lack of injury markers may be due to the imaging conditions, automated analysis, or biomechanics of Lisfranc injuries. More alignment differences were seen under unloaded conditions, suggesting that weight-bearing imaging may not be appropriate for this injury. Overall, automated analysis shows only minimal changes in alignment measures, and additional study is necessary to improve diagnostic tools for Lisfranc injuries. Evidence Level V; Mechanism-based reasoning.

Risk Factors for Midfoot Arthritis Associated With Medical History by Weight Bearing Computed Tomography

Tarso-metatarsal joints and naviculocuneiform joints comprising midfoot is the second most commonly involved joints following the first metatarsophalangeal joint in the foot. However, related factors of midfoot arthritis (MA) have been rarely reported. The bony structure and alignment can be more precisely assessed using Weight-Bearing Computed Tomography (WBCT) than conventional radiographs. Therefore, the aim of this study was to investigate risk factors for MA related to medical history and comorbid foot deformities using WBCT. WBCT data from September 2014 to April 2022 were extracted from a single referral hospital. All cases were divided into two groups by the presence of MA. Twenty-five potential related factors including demographics, etiology, and common co-occurring foot deformities were collected for comparison. Six hundred six cases (247 males and 359 females) among consecutive 1316 cases between September 2014 to April 2022 were selected. One hundred thirty-nine male cases (56.3%) and 210 female cases (58.5%) showed MA. In stepwise multiple logistic regression analysis, 5 factors remained statistically significant. The multivariate-adjusted odds ratios for age, laterality, body mass index (BMI), Progressive Collapsing Foot Deformity (PCFD), and lesser toe deformities (LTD) were 1.08, 1.54, 1.05, 6.62, and 3.03 respectively. Risk factors for MA associated with medical history and foot deformities included age, laterality, BMI, PCFD, and LDT.

Normative contact mechanics of the ankle Joint: Quantitative assessment utilizing bilateral weightbearing CT

Alterations in ankle’s articular contact mechanics serve as one of the fundamental causes of significant pathology. Nevertheless, computationally intensive algorithms and lack of bilateral weightbearing imaging have rendered it difficult to investigate the normative articular contact stress and side-to-side differences. The aims of our study were two-fold: 1) to determine and quantify the presence of side-to-side contact differences in healthy ankles and 2) to establish normative ranges for articular ankle contact parameters. In this retrospective comparative study, 50 subjects with healthy ankles on bilateral weight-bearing CT were confirmed eligible. Segmentation into 3D bony models was performed semi-automatically, and individualized cartilage layers were modelled based on a previously validated methodology. Contact mechanics were evaluated by using the mean and maximum contact stress of the tibiotalar articulation. Absolute and percentage reference range values were determined for the side-to-side difference. Amongst a cohort of individuals devoid of ankle pathology, mean side-to-side variation in these measurements was < 12 %, while respective differences of > 17 % talar peak stress and > 31 % talar mean stress indicate abnormality. No significant differences were found between laterality in any of the evaluated contact parameters. Understanding these values may promote a more accurate assessment of ankle joint biomechanics when distinguishing acceptable versus pathological contact mechanics in clinical practice.

Automation improves the efficiency of weightbearing CT scan 3D volumetric assessments of the syndesmosis

BackgroundWeight-bearing CT (WBCT) 3D volumetric measurement has shown promising accuracy for the diagnosis of syndesmotic instability. However, these measurements are rather complex and time-consuming, rendering them a clinically unfavorable option. We hypothesized that automatized measurements would be more accurate and time-efficient than manual ones. MethodsThirty cases of intraoperatively confirmed syndesmotic instability along with thirty individuals with no injuries to the ankle joint were recruited as cases and controls, retrospectively. Two observers conducted the manual volumetric measurements two times, at a one-week interval. An automated algorithm for 3D WBCT measurements was developed to conduct the measurements on the axial images. The time spent on each method was recorded. Mann-Whitney U test was used to compare the values between human raters and computers. Inter- and intra-class reliability were calculated. ResultsThe intra-class correlation coefficient was found to be “excellent” for the automated measurements (0.97) and “good” for the observers (0.75). Similarly, the Cronbach’s alpha was shown to be higher for the computer (0.88) than the observers (0.60 and 0.62). The mean time spent on the measurements was different between human raters and the computer-assisted method (p < 0.001). ConclusionAutomated volumetric assessment of syndesmosis seems to be a faster and more reliable option than the manual one. We suggest future larger-scale prospective studies conducted under actual clinical circumstances for more definitive conclusions. Level of evidenceRetrospective case-control study - Level 3

A finite element model of human hindfoot and its application in supramalleolar osteotomy

BackgroundThe majority of the ankle osteoarthritis cases are posttraumatic and affect younger patients with a longer projected life span. Hence, joint-preserving surgery, such as supramalleolar osteotomy becomes popular among young patients, especially those with asymmetric arthritis due to alignment deformities. However, there is a lack of biomechanical studies on postoperative evaluation of stress at ankle joints. We aimed to construct a verifiable finite element model of the human hindfoot, and to explore the effect of different osteotomy parameters on the treatment of varus ankle arthritis. MethodsThe bones of the hindfoot are reconstructed using normal CT tomography data from healthy volunteers, while the cartilages and ligaments are determined from the literature. The finite element calculation results are compared with the weight-bearing CT (WBCT) data to validate the model. By setting different model parameters, such as the osteotomy height (L) and the osteotomy distraction distance (h), the effects of different surgical parameters on the contact stress of the ankle joint surface are compared. FindingsThe alignment and the deformation of hindfoot bones as determined by the finite element analysis aligns closely with the data obtained from WBCT. The maximum contact stress of the ankle joint surface calculated by this model increases with the increase of the varus angle. The maximum contact stresses as a function of the L and h of the ankle joint surface are determined. InterpretationThe relationship between surgical parameters and stress at the ankle joint in our study could further help guiding the planning of the supramalleolar osteotomy according to the varus/valgus alignment of the patients.

Forefoot Morphotypes in Cavovarus Feet: A Novel Assessment of Deformity.

The cavovarus foot is a complex 3-dimensional deformity. Although a multitude of techniques are described for its surgical management, few of these are evidence based or guided by classification systems. Surgical management involves realignment of the hindfoot and soft tissue balancing, followed by forefoot balancing. Our aim was to analyze the pattern of residual forefoot deformities once the hindfoot is corrected, to guide forefoot correction. We included 20 cavovarus feet from 16 adult patients with Charcot-Marie-Tooth who underwent weightbearing CT (mean age 43.4 years, range: 22-78 years, 14 males). Patients included had flexible deformities, with no previous surgery. Using specialized software (Bonelogic 2.1, Disior) a 3-dimensional, virtual model was created. Using morphologic data captured from normal feet in patients without pathology as a guide, the talonavicular joint of the cavovarus foot was digitally reduced to a "normal" position to simulate the correction that would be achieved during surgical correction. Models of the corrected position were exported and geometrically analyzed using Blender 3.64 to identify anatomical trends. We identified 4 types of cavovarus forefoot morphotypes. Type 0 was defined as a balanced forefoot (2 cases, 10%). Type 1 was defined as a forefoot where the first metatarsal was relatively plantarflexed to the rest of the foot, with no significant residual adduction after talonavicular joint correction (12 cases, 60%). Type 2 was defined as a forefoot where the second and first metatarsals were progressively plantarflexed, with no significant adduction (4 cases, 20%). Type 3 was defined as a forefoot where the metatarsals were adducted after talonavicular derotation (2 cases, 10%). In this relatively small cohort, we identified 4 forefoot morphotypes in cavovarus feet that might help surgeons to recognize and anticipate the residual forefoot deformities after hindfoot correction. Different treatment strategies may be required for different morphotypes to achieve balanced correction. Level IV, retrospective case series.

Enhancing precision in osteochondral lesions of the talus measurements and improving agreement in surgical decision-making using weight-bearing computed tomography and distance mapping.

Weight-bearing computed tomography (WBCT) enables the creation of a three-dimensional (3D) model that represents the ankle morphology in a standing position. Distance mapping (DM) is a complementary feature that uses color coding to represent the relative intraarticular distance and can be used to outline intraarticular defects. Consequently, DM offers a novel approach to delineating osteochondral lesions of the talus (OLT), allowing for the quantification of its surface, volumeand depth. The reliability of DM for OLT measurements has yet to be thoroughly evaluated. This study primarily aims to determine the reliability of DM in measuring the surface, depthand volume of OLT. A secondary objective is to ascertain whether measurements obtained through DM, when integrated with a predefined treatment algorithm, can facilitate consensus among surgeons regarding the optimal surgical intervention. This cohort comprised 36 patients with 40 OLTs evaluated using WBCT and DM. Two raters used DM to determine the lesion boundary (LB) and lesion fundus (LF) and calculate the lesion depth, surfaceand volume. The raters were asked to choose between bone marrow stimulation, autologous matrix-induced chondrogenesisand osteochondral transposition based on the measurement. Inter-rater and intra-rater agreement was measured. Interclass correlation of the lesion's depth surface produced an excellent inter-rater and intra-rater agreement of 0.90-0.94 p < 0.001. Cohen's κ agreement analysis of the preferable preoperative plan produced a κ = 0.834, p < 0.001, indicating a near-perfect agreement. WBCT-based 3D modules and DM can be used to measure the lesion'ssurface, depth and volume with excellent inter-rater and inter-rater agreement; using this measurement and a predetermined treatment algorithm, a near-perfect inter-rater agreement for the preoperative planning was reached. WBCT in conjunction with AI capabilities could help determine the type of surgery needed preoperatively, evaluate the hindfoot alignmentand assess if additional surgeries are needed. Level III.

Augmented Stress Weight-bearing CT for Evaluation of Subtle Lisfranc Injuries in the Elite Athlete.

Lisfranc injuries refer to a disruption or displacement of the tarsometatarsal joint of the foot. Subtle Lisfranc injuries can go undiagnosed on conventional imaging leading to devastating consequences and poor functional outcomes for elite athletes. Objective. The objective of this case study is to present a novel imaging technique using weight-bearing computed tomography (CT) with enhanced stress to identify subtle, dynamically unstable Lisfranc injuries. We illustrate this with a case presentation of an elite athlete who ultimately required surgical fixation for a subtle Lisfranc injury. To perform an augmented stress weight-bearing CT, the patient was positioned standing, with their feet facing forward, and weight equally distributed. The patient was then coached to symmetrically raise both heels from the scanner platform. This plantarflexion provided augmented stress on the midfoot, allowing for more sensitive imaging of the Lisfranc injury. The weight-bearing CT and augmented stress images undergo 3D reconstruction and postprocessing to render coronal and sagittal images, allowing for comparison of the standard weight-bearing and augmented stress images. We present the case of a 22-year-old collegiate football lineman sustaining a Lisfranc injury. The injury diagnosis was made by magnetic resonance imaging (MRI) and clinical examination, without evidence of injury on weight-bearing XR or standard weight-bearing CT. With augmented stress CT imaging, the Lisfranc instability was noted, leading to surgical fixation, and return to sport the next season. We propose this technique for diagnosing subtle, unstable Lisfranc injuries where clinical suspicion persists despite inconclusive imaging, particularly in elite athletes. Further research is needed with larger sample sizes to investigate the sensitivity of this novel imaging technique for the detection of Lisfranc injury. Level 4: Case Report.

Clubfoot Correction with Ponseti Technique: Three-Dimensional Alignment Analysis and Residual Adult Deformity Effects on Patient-Reported Outcomes

Introduction/Purpose: Few studies have assessed the long-term outcomes of the Ponseti technique and none have utilized 3- dimensional weightbearing analysis. The goal of this study was to understand how potential residual 3D deformities and abnormalities influence patient reported outcomes (PROs). This was accomplished by assessing anatomical foot and ankle alignment in adult clubfoot patients treated with the Ponseti method using 3D weightbearing CT (WBCT) imaging and then correlating residual foot and ankle malalignment with PROs. Methods: There were 37 consecutive patients (57 feet) included and 14 volunteers healthy controls (28 feet) included in this study. Every participant was evaluated using a WBCT (HiRise©) in a bipedal standing position. From these scans Cavus, Adductus, and Varus components were evaluated using multiple 3D measurements calculated using the semi-automatic segmentation software Bonelogic®. Specific Cavus related measurements included sagittal talus-first metatarsal angle and the calcaneal inclination angle. Varus related measurements included talocalcaneal angle in both the sagittal and axial planes as well as the hindfoot moment arm and the hindfoot alignment angle. Adductus deformity was evaluated using talonavicular coverage angle. These measurements were then correlated with patient reported outcome surveys, which included Visual Acuity Scale for pain, PROMIS general health, PROMIS physical function, PROMIS pain interference, pain catastrophic scale, and European foot and ankle society score. Results: There was no significant overall residual 3D-deformity observed in clubfoot patients when compared to controls, with similar FAO measurements observed between the groups, clubfoot=2.63% (95%CI=1.41%-3.85%) and control=3.2% (CI=1.6%- 4.8%,P=0.58). The sagittal talus-first-metatarsal in the clubfoot-patients had a mean-value of -0.12° compared to the controls, −5.2°. Clubfoot patients also had a decreased calcaneal-inclination-angle relative to the controls, 13.01° and 21.5° respectively. Talocalcaneal-angle for clubfoot patients in both the sagittal-plane,44.28°, and axial-plane, 17.74°, were reduced compared to the controls, 57.51° and 25.78°. Talonavicular-coverage-angle in the clubfoot-group (18.63°) was less than the controls (29.19°). Talus- first-metatarsal-angle in the sagittal-plane was significantly correlated with VAS-scores (RSquare=0.19,P=0.0118) and the EFAS- Score (RSquare=0.27,P=0.0025). Talocalcaneal-angle in the sagittal plane was also significantly correlated with the PROMIS-Pain- Interference-score (P=0.038) and PROMIS-Physical-Function-score (RSquare=0.32,P=0.0007). Conclusion: The Ponseti technique is an effective nonsurgical treatment for the overall three-dimensional foot and ankle alignment of Clubfoot. While mild, but statistically significant residual Varus and Adductus deformities were observed in adult clubfoot patients, the overall 3D alignment (FAO) was found to be similar between clubfoot patients and controls. These findings highlight the efficacy of the Ponseti technique and potentially explain the overall good PROs. The results of this study could potentially provide insight into treatment targets that may be applied to help optimize patient outcomes when treating children with Clubfoot in the future. The Ponseti technique is an effective nonsurgical treatment for Clubfoot's overall three-dimensional foot and ankle alignment. While mild, but statistically significant residual Varus and Adductus deformities were observed in adult clubfoot patients, the overall 3D alignment (FAO) was found to be similar between clubfoot patients and controls. These findings highlight the efficacy of the Ponseti technique and potentially explain the overall good PROs. The results of this study could potentially provide insight into treatment targets that may be applied to help optimize patient outcomes when treating children with Clubfoot in the future.

Classification of the Os Calcis Subtalar Morphology in Symptomatic Flexible Pediatric Pes Planus Deformity Using Weightbearing CT and Distance Mapping

Introduction/Purpose: The etiology of symptomatic pediatric pes planus (PP) deformity is unclear. Reduced os calcis subtalar joint (OCST) anterior facet morphology has been suggested to result in less support to the talar head and a higher propensity to develop PP deformity. Weightbearing computed tomography (WBCT) and distance mapping (DM) offer new opportunities to investigate PP deformity in general and the OCST specifically. The purpose of this study is to investigate the OCST morphology using DM and to classify PP subtalar subtypes with DM using Bruckner's A-D classification system. Methods: Forty feet in 25 patients in a national referral center were evaluated for symptomatic PP deformity that failed nonoperative treatment. A WBCT scan was performed as part of the preoperative evaluation. Visualization of the distance distribution between the articulating surfaces of the subtalar joint was based on a DM technique. Intra- and interobserver agreement of the subtalar morphology was assessed using Bruckner’s classification system. Results: The mean age was 10.7 ± 1.4 years. The following mean ± SD and median ± ranges were semiautomatically measured for this group: Meary angle −21 ± 8, calcaneal inclination 15 ± 4 degrees, talar coverage angle 39 (range 32.6-49) degrees, and hindfoot moment-arm 16 ± 5 mm. Classifying subtalar morphology using DM yielded an excellent intra- and interobserver agreement. The individual percentages of each individual subtype were calculated: type A 5%, type B 48%, type C 4%, and type D in 44%. Conclusion: This study demonstrated excellent intraobserver and interobserver agreement in classifying the OCST using DM. A higher prevalence of types B and D was observed compared to types A and C in this PP cohort Distance mapping representation of 4 types of os calcis according to Buckner’s Classification System. (A) Type A, demonstrated in the axial view (right foot). (B) Type B, demonstrated in the axial view (right foot). (C) Type C, demonstrated in the axial view (right foot). (D) Type D, demonstrated in the axial view (left foot)

Preoperative Degenerative Changes at the Tibial Sesamoid-Metatarsal Joint in Hallux Valgus: Association With Postoperative Patient-Reported Outcomes After Modified Lapidus Procedure.

Degenerative changes at the sesamoid-metatarsal joints (SMJs) may be a source of pain following hallux valgus surgery. The aims of this study were to describe degenerative changes at the SMJs on weightbearing computed tomography (WBCT) scans and, secondarily, investigate their association with 1-year patient-reported outcome scores following a modified Lapidus procedure for hallux valgus. We hypothesized that reduced joint space in the SMJs would correlate with worse patient-reported outcomes. Fifty-seven hallux valgus patients who underwent a modified Lapidus procedure had preoperative and minimum 5-month postoperative WBCT scans, and preoperative and at least 1-year postoperative PROMIS physical function (PF), pain interference, and pain intensity scores were included. Degenerative changes at the SMJs were measured using distance mapping between the sesamoids and first metatarsal head on preoperative and postoperative WBCT scans. The minimum and average distances between the first metatarsal head and tibial sesamoid (tibial-SMJ) for each patient preoperatively and postoperatively were measured. Sesamoid station was measured on WBCT scans using a 0 to 3 grading system. Linear regression was used to investigate the correlations between minimum preoperative and postoperative tibial-SMJ distances and 1-year postoperative PROMIS scores. The median minimum and average tibial-SMJ distances increased from 0.82 mm (interquartile range [IQR] 0.40-1.03 mm) and 1.62 mm (IQR 1.37-1.75 mm) preoperative to 1.09 mm (IQR 0.96-1.23 mm) and 1.73 mm (IQR 1.60-1.91 mm) postoperative (P < .001 and P < .001), respectively. In a subset of patients with complete sesamoid reduction, we found an association between preoperative minimum tibial-SMJ distance and 1-year postoperative PROMIS PF scores (coefficient 7.2, P = .02). Following the modified Lapidus procedure, there was a statistically significant increase in the tibial-SMJ distance. Additionally, in patients with reduced sesamoids postoperatively, reduced preoperative tibial-SMJ distance correlated with worse PROMIS PF scores. Level IV, case series.

Preoperative Degenerative Changes at the Medial Sesamoid-Metatarsal Joint Is Associated with Postoperative Patient-Reported Outcomes in Hallux Valgus

Introduction/Purpose: While hallux valgus (HV) is understood to be a triplanar deformity of the first metatarsal, less is known about the contribution of the sesamoid-metatarsal joint (SMJ) to pain and function. Osteoarthritis of the SMJ is frequently present in HV feet, with an incidence rate ranging from 32% to 81%. Following surgical correction, approximately 10% of HV patients remain dissatisfied, but factors affecting postoperative outcomes are poorly understood. The primary aim of our study was to describe the relationship between degenerative changes at the SMJ as measured on weightbearing CT (WBCT) scans and 1-year patient-reported outcome scores following a modified Lapidus procedure for correction of HV. We hypothesized that decreased joint space at the SMJ would affect postoperative patient-reported outcomes. Methods: This study included 48 consecutive patients who underwent a modified Lapidus procedure for HV, had preoperative and at least 5-month postoperative WBCT scans, and had preoperative PROMIS scores and at least 1-year postoperative PROMIS Physical Function (PF), Pain Interference, and Pain Intensity scores. For each patient, the first metatarsal and sesamoids on pre- and postoperative WBCT scans were segmented using Disior Bonelogic software and uploaded to Geomagic Design X to perform distancing mapping. The minimum and average distances between the first metatarsal head and medial sesamoid (medial-SMJ) for each patient pre- and postoperatively were calculated. Sesamoid subluxation was measured on WBCT scans using the grading system from 0 to 3 (Yildirim et al.). A simple linear regression model was used to investigate the correlations between minimum preoperative and postoperative medial-SMJ distances and 1-year postoperative PROMIS scores in patients with postoperative reduction of the sesamoids (grade 0). Results: Preoperatively, the mean minimum and average medial-SMJ distances were 0.76 ± 0.37 mm and 1.54 ± 0.33 mm, respectively. Postoperatively, the mean minimum and average medial-SMJ distances were 1.08 ± 0.25 mm and 1.73 ± 0.24 mm, respectively. Thirty-five of 48 patients had a complete reduction of the sesamoids. Lower preoperative minimum distances at the medial-SMJ were significantly correlated with worse 1-year PROMIS PF scores (r=0.405, P=0.016) (Figure 1). Similarly, lower preoperative minimum distances at the medial-SMJ were significantly correlated with worse 1-year PROMIS Pain Intensity scores (r=-0.350, P=0.039) but did not reach significance for 1-year PROMIS Pain Interference scores (r=-0.286, P=0.095). The postoperative minimum medial-SMJ distance was not correlated with 1-year PROMIS PF, Pain Interference, and Pain Intensity scores. Conclusion: In HV patients undergoing a modified Lapidus procedure with postoperatively reduced sesamoids, decreased joint space at the medial sesamoid-metatarsal head articulation was associated with worse 1-year postoperative function as measured by PROMIS PF scores and worse 1-year postoperative pain as measured by PROMIS Pain Intensity scores. In contrast, postoperative degenerative changes at the SMJ were not found to be associated with patient-reported outcomes. Our results suggest that pre-existing SMJ arthritic changes may affect postoperative outcomes and may be a source of dissatisfaction following HV surgery despite appropriate correction of the deformity. Figure 1. Preoperative medial sesamoid to the first metatarsal head minimum distance relative to 1-year PROMIS Physical Function, Pain Intensity, and Pain Interference scores. A simple linear regression demonstrates a significant association between preoperative medial sesamoid –metatarsal head minimum joint distance and 1-year PROMIS Physical Function (r=0.405, P=0.016) and Pain Intensity (r=‒0.305, P=0.039) scores.

3D Analysis of Joint-Sparing Charcot-Marie-Tooth Surgery Effect on Initial Standing Foot Alignment.

The complex deformities in cavovarus feet of Charcot-Marie-Tooth (CMT) disease are difficult to evaluate. The aim of this study was to quantify the initial standing alignment correction achieved after joint-sparing CMT cavovarus reconstruction using pre- and postoperative weightbearing computed tomography (WBCT). Twenty-nine CMT cavovarus reconstructions were retrospectively analyzed. Three-dimensional measurements were performed using semiautomated software (Bonelogic 2.1) to investigate changes in sagittal, axial, and coronal parameters. Pre- and postoperative data were compared, along with normative data. Correlation among the preoperative measurements and the amount of correction in sagittal, axial, and coronal parameters were analyzed. The sagittal, axial, and coronal malalignment of the hindfoot, and the sagittal and axial malalignment of the forefoot, was significantly improved after corrective surgery (P < .05). Sagittal Meary angle (from 14.8 to 0.1 degrees), axial talonavicular angle (TNA, from 3.6 to 19.2 degrees), and coronal hindfoot alignment (from 11.0 to -11.1 degrees) showed significant changes postoperatively (P < .001). Hindfoot, forefoot sagittal, and forefoot axial parameters reached comparable outcomes compared with normative value (P > .05). Regarding amount of correction, Spearman correlation demonstrated that axial Meary angle and TNA were most strongly related to improvement in sagittal Meary angle and coronal hindfoot alignment. Preoperative and postoperative WBCT measurements demonstrated that joint sparing CMT cavovarus reconstruction significantly improved sagittal, axial, and coronal deformities of CMT, and sagittal Meary angle was restored toward normative values. Apparent axial plane correction, the majority of which occurred at the talonavicular joint, had the strongest correlation with deformity correction in multiple planes. This suggests that soft tissue releases and correction of the talonavicular joint may be a key component of a cavovarus foot correction. Level IV, retrospective case series.

Radiographic Analysis of Valgus Ankle Deformity With or Without Medial Longitudinal Arch Collapse.

Establishing a surgical plan for ankle deformities necessitates a comprehensive understanding of the deforming forces involved, and the morphology of the ankle deformity plays an important role as well. Valgus tibiotalar tilt development has mostly been described in patients with a low medial longitudinal arch, as seen in progressive collapsing foot deformity (PCFD). However, some valgus ankles demonstrate no radiographic evidence of a collapsed medial arch. This study aims to investigate whether there are differences in the radiographic morphology of valgus ankle deformities between patients with and without a low medial longitudinal arch to explore if they have different etiologies. We retrospectively reviewed patients who underwent surgical treatment for asymmetric valgus ankle deformity at our institution between 2017 and 2021. Patients with a valgus tibiotalar tilt (TT) greater than 4 degrees and Meary angle greater than 30 degrees (mean: 38.9) were included in the PCFD group (n = 29). The non-PCFD group (n = 24) with TT greater than 4 degrees and Meary angle less than 4 degrees (mean: 0.3) was also established. In the weightbearing ankle anteroposterior view, the TT and medial distal tibial angle were measured. Additionally, to assess the mediolateral position of the talus, the talar center migration (TCM) and lateral talar dome-plafond distance (LTD-P) ratio in the coronal plane were measured. In weightbearing computed tomography (WBCT), the degree of axial plane talocalcaneal subluxation and the prevalence of sinus tarsi bony impingement were assessed. Intergroup comparison was conducted. Both groups demonstrated a similar degree of TT, with a mean of 11.6 degrees in the PCFD group and 13.7 degrees in the non-PCFD group (P = .2330). However, the PCFD group showed a significantly greater TCM and LTD-P ratio compared with those of the non-PCFD group (P < .0001), indicating that PCFD patients have a more medially translated talus in ankle anteroposterior radiographs. WBCT showed that the PCFD group on average had 18 degrees greater axial plane talocalcaneal subluxation (P < .0001) and 52% higher prevalence of sinus tarsi bony impingement (P = .0002) compared with the non-PCFD group. This study suggests that valgus ankles may exhibit different radiographic morphologies depending on the status of the longitudinal arch. Valgus ankles in PCFD patients tend to have a more medially translated talus. This finding may suggest the presence of different deforming forces between the 2 groups and may indicate the need for different treatment strategies to address talar tilt. Level III, case-control.

Prevalence of midfoot arthritis and lesser toe deformities

BackgroundThe aim of this study was to investigate the epidemiology of Midfoot Arthritis (MA) and Lesser toe deformity (LTD) using Weight-Bearing Computed Tomography (WBCT). Methods606 cases (247 male, 359 female) among 1316 consecutive cases with WBCT data from September 2014 to April 2022 were retrospectively reviewed at a single referral institution. The Cochran-Armitage test was performed to evaluate the trend of prevalence with respect to age group and obesity classification. Results139 male (56.3%) and 210 female cases (58.5%) showed MA. 157 male (63.6%) and 222 female cases (61.6%) showed LTD. 115 male (19.0%) and 157 female cases (25.9%) showed both MA and LTD. The prevalence of MA and LTD increased with age in both genders. The incidence of MA in males showed an increasing tendency until obesity class II and then was slightly decreased in obesity class III. This is contrary to females whose prevalence increased with increasing obesity groups. LTD had a similar pattern in both genders to obesity classification. ConclusionsThe prevalence of MA and LTD increased with age and increasing obesity groups for both genders. Level of evidenceLevel III, Retrospective Comparative Study.

Assessment of lower limb alignment: supine weight-bearing CT scanograms compared with a standing full-length radiograph.

We identified limb misalignment by applying personalized axial force while the limb was in a supine position to mimic a standing posture. This study aimed to confirm the accuracy of evaluating lower limb alignment using supine weight-bearing CT scanograms. We prospectively compared measurements of the weight-bearing line ratio (WBL), hip-knee-ankle (HKA) angle, and joint convergence angle (JLCA) in 46 sets of supine weight-bearing CT scanograms with those obtained from full-length standing anteroposterior lower extremity radiographs. We achieved the weight-bearing CT scanograms by applying six different levels of axial force: zero, 1/5 of body weight, 2/5 of body weight, 3/5 of body weight, 4/5 of body weight, and full body weight. We assessed the impact of age, body mass index, HKA, and JLCA on the observed mechanical axis deviation differences between the two methods. The average absolute difference between standing radiographs and supine CT scanograms was 4.32% for the WBL ratio (p < 0.05), 1.25° for HKA (p < 0.05), and 0.46 for JLCA (p < 0.05). The mean absolute difference was minimal when applying full body weight axial pressure during CT scanograms (p > 0.05). Age, body mass index, HKA, and JLCA had no effect on the deviation in the mechanical axis measurements obtained through supine weight-bearing CT scanograms with full body weight. No significant differences were found in assessing lower limb alignment between standing radiographs and supine weight-bearing CT scanograms with full body weight. Weight-bearing CT scanograms prove to be a valuable method for assessing lower limb alignment while in a supine position.