Weightbearing CT Research Articles

The position, orientation, and relative size of the fibularis longus tubercle in normal patients: A weightbearing CT assessment.

The fibularis longus attaches to the base of the first metatarsal at the fibularis/peroneus longus tubercle (FLT/PLT). Theoretically, differences in FLT morphology may reflect changes in the function of the fibularis longus. This study defines the normal limits of the FLT position, orientation, and size in patients with morphologically normal foot anatomy. A retrospective analysis of 131 feet without deformity in 72 patients undergoing weightbearing CT (WBCT) at a single center was conducted. The position and morphology of the FLT was assessed with novel measurements including tubercle-floor distance, tubercle-metatarsal angle, and the angle between the floor and a line bisecting the FLT (bisecting angle). Roundness of the FLT was compared to a triangle limiting its shape (triangular ratio), with lower values indicating increasing roundness. We also report relative size of the FLT to the first metatarsal (X/Y ratio), and relative size of the first metatarsal and FLT to the second metatarsal (XY/Z ratio). There were no significant side to side differences for any measurement (p > 0.05). Mean values were: tubercle-floor distance 28.02 ± 2.63 mm, tubercle-metatarsal angle 32.7 ± 6.32 degrees, bisecting angle 65.58 ± 6.27 degrees, triangular ratio 0.69 ± 0.04, X/Y ratio 1.13 ± 0.20, and XY/Z ratio 3.44 ± -0.72. Bisecting angle strongly correlated with tubercle-metatarsal angle (Pearson correlation 0.840, p < 0.001) suggesting FLT rotation occurred independent of foot position. ICC was >0.943 for all measurements. This study reports the morphology of the FLT in individuals with normal feet. This normative data may be used in future studies examining differences between groups of patients with foot pathology, helping us better understand the role of fibularis longus in the development and treatment of foot disorders.

Different Positions of Weightbearing CT Images Can Influence the Hindfoot Alignment Evaluation Using 2-Dimensional Methodology.

Three-dimensional weightbearing CT (WBCT) has been widely used to assess foot and ankle alignment. However, most current measurement methods are based on 2-dimensional concepts-distance, long axis, angulation, etc-and are sensitive to changes in orientation of the WBCT images. This study demonstrated how changes in positioning of the image can significantly influence the evaluation of hindfoot alignment. WBCT scans of 10 feet without deformities were used. In the horizontal view, the long axis of the foot image was aligned to a neutral position and then rotated 5, 10, 15, and 20 degrees both internally and externally to simulate malposition. The Calcaneal Moment Arm (CMA) was measured by 2 investigators independently in the above positions. An intraclass correlation coefficient (ICC) model was used to assess the intra- and interobserver reliabilities. The correlation between the CMA and the rotation angle of the foot images was analyzed using linear regression. The CMA measurements demonstrated that internal rotation of the image changed the neutral hindfoot into valgus, whereas external rotation led to varus. A 1-degree internal or external rotation of the image correlated with 0.48 (±0.03) mm increase or decrease in the modified WBCT-CMA value (P < .0001, R2 = 0.6406). This study demonstrated that although 3D WBCT provides the ability to observe the foot from different perspectives, current alignment evaluation tools are limited to 2 dimensions. Therefore, positioning the WBCT images in a consistent orientation is important to generate correct data.

Reliability analysis of WBCT-derived 3D models for comparing preoperative and postoperative alignment in total ankle arthroplasty

BackgroundTraditional imaging techniques for total ankle arthroplasty (TAA) evaluation are limited by rotational bias and bone superimposition, highlighting the necessity for more precise assessment methods. The advent of weight-bearing computed tomography (WBCT) generated 3D enhance the visualization of foot and ankle alignment, offering unmatched detail. This study aims to assess the accuracy of preoperative and postoperative measurements in TAA across all three planes using WBCT-generated 3D models. We hypothesize that these models can be reliably used to compare preoperative and postoperative alignment. MethodsFor 81 patients undergoing TAA, preoperative and postoperative WBCT models were created. Measurements included five coronal angles: Alpha, Tibiotalar Surface Angle (TSA), Talar Tilt Angle (TT), Salzmann's 20 degrees Angle (SA), and Talocalcaneal Angle (TCA); three sagittal angles: Beta, Gamma, and Tibiotalar Ratio (TTR); and one axial angle: The Posterior Talar Rotational Angle (PTARA). Two raters evaluated these before and after surgery in two separate sessions. The study then compared preoperative to postoperative measurements, calculating inter-rater and intra-rater reliability. ResultsSignificant changes were observed in three coronal angles (TSA, TT, and SA) and two sagittal angles (Beta and Gamma), with P-values of 0.2, 0.007, 0.019, <0.001, and <0.001, respectively. No significant changes were noted in Alpha, TCA, TTR, and PTARA, with P-values of 0.2, 0.9, 0.2, and 0.6, respectively. Intra-rater and inter-rater reliability scores ranged from 0.885 to 0.97, indicating good to excellent interclass correlation across all planes, both pre-and postoperatively. ConclusionWBCT-generated 3D modeling and image analysis software have enabled a detailed comparison between preoperative alignment and postoperative TAA positioning across coronal, sagittal, and axial planes, revealing significant adjustments in coronal and sagittal alignments. The high reliability and reproducibility of these measurements affirm their value in preoperative planning in improving the accuracy of surgical interventions. Level of evidenceLevel III of evidence

Investigating patellar motion using weight-bearing dynamic CT: normative values and morphological considerations for healthy volunteers

BackgroundPatellar instability is a well-known pathology in which kinematics can be investigated using metrics such as tibial tuberosity tracheal groove (TTTG), the bisect offset (BO), and the lateral patellar tilt (LPT). We used dynamic computed tomography (CT) to investigate the patellar motion of healthy subjects in weight-bearing conditions to provide normative values for TTTG, BO, and LPT, as well as to define whether BO and LPT are affected by the morphology of the trochlear groove.MethodsDynamic scanning was used to acquire images during weight-bearing in 21 adult healthy volunteers. TTTG, BO, and LPT metrics were computed between 0° and 30° of knee flexion. Sulcus angle, sulcus depth, and lateral trochlear inclination were calculated and used with the TTTG for simple linear regression models.ResultsAll metrics gradually decreased during eccentric movement (TTTG, -6.9 mm; BO, -12.6%; LPT, -4.3°). No significant differences were observed between eccentric and concentric phases at any flexion angle for all metrics. Linear regression between kinematic metrics towards full extension showed a moderate fit between BO and TTTG (R2 0.60, β 1.75) and BO and LPT (R2 0.59, β 1.49), and a low fit between TTTG and LPT (R2 0.38, β 0.53). A high impact of the TTTG distance over BO was shown in male participants (R2 0.71, β 1.89) and patella alta individuals (R2 0.55, β 1.91).ConclusionWe provided preliminary normative values of three common metrics during weight-bearing dynamic CT and showed the substantial impact of lateralisation of the patella tendon over patella displacement.Relevance statementThese normative values can be used by clinicians when evaluating knee patients using TTTG, BO, and LPT metrics. The lateralisation of the patellar tendon in subjects with patella alta or in males significantly impacts the lateral displacement of the patella.Key PointsTrochlear groove morphology had no substantial impact on motion prediction.The lateralisation of the patellar tendon seems a strong predictor of lateral displacement of the patella in male participants.Participants with patella alta displayed a strong fit between the patellar lateral displacement and tilt.TTTG, BO, and LPT decreased during concentric movement.Concentric and eccentric phases did not show differences for all metrics.Graphical

Trends in the Use of Weightbearing Computed Tomography.

Background: This review aimed to critically appraise the most recent orthopedic literature around cone beam weightbearing computed tomography (WBCT), summarizing what evidence has been provided so far and identifying the main research trends in the area. Methods: This scoping review was performed on studies published between January 2013 and December 2023 on the Pubmed database. All studies (both clinical and nonclinical) in which WBCT had been used were critically analyzed to extract the aim (or aims) of the study, and the main findings related to the role of this imaging modality in the diagnostic pathway. Results: Out of 1759 studies, 129 were selected. One hundred five manuscripts (81%) dealt with elective orthopedic conditions. The majority of the analyses (88 studies; 84%) were performed on foot and ankle conditions, while 13 (12%) studies looked at knee pathologies. There was a progressive increase in the number of studies published over the years. Progressive Collapsing Foot Deformity (22 studies; 25%) and Hallux Valgus (19 studies; 21%) were frequent subjects. Twenty-four (19%) manuscripts dealt with traumatic conditions. A particular interest in syndesmotic injuries was documented (12 studies; 60%). Conclusions: In this review, we documented an increasing interest in clinical applications of weightbearing CT in the orthopedic field between 2013 and 2023. The majority of the analyses focused on conditions related to the foot and the ankle; however, we found several works investigating the value of WBCT on other joints (in particular, the knee).

Preoperative planning of total ankle prosthesis – What are we aiming at?

IntroductionAnkle osteoarthritis poses significant challenges, affecting patients’ quality of life and often necessitating surgical intervention. Total ankle replacement (TAR) has emerged as an effective treatment, in patients with post-traumatic arthritis. Precise preoperative planning is crucial for achieving optimal outcomes in TAR procedures. This article explores the use of advanced imaging techniques, virtual modeling, and surgical strategies in preoperative planning for TAR. MethodsThe preoperative planning process involves thorough patient assessment, including clinical examination and imaging studies such as Weight Bearing CT scans (WBCT) and MRI. Classification systems like the Canadian Orthopedic Foot & Ankle Society (COFAS) classification help guide treatment decisions and staging of procedures. Virtual foot/ankle models derived from WBCT scans enable accurate assessment of deformities and facilitate precise implant positioning. DiscussionOptimal TAR outcomes rely on restoring normal ankle anatomy and function while addressing associated deformities and pathology. Precise alignment, joint congruency, and rotational positioning of implant components are Important considerations. Virtual planning allows for simulation of implant placement and axis correction, aiding surgical decision-making and predicting outcomes. However, it has limitations in predicting soft tissue effects and final implant size. ConclusionPreoperative planning plays a important role in TAR procedures, understanding optimal implant placement. Advanced imaging modalities, classification systems, and virtual modeling techniques enhance surgical precision. Continued refinement of preoperative planning strategies is essential for further advancing TAR outcomes and patient satisfaction.10.1016/j.fuspru.2024.07.001

Morphological changes in flatfoot: a 3D analysis using weight-bearing CT scans

BackgroundFlatfoot is a condition resulting from complex three-dimensional (3D) morphological changes. Most Previous studies have been constrained by using two-dimensional radiographs and non-weight-bearing conditions. The deformity in flatfoot is associated with the 3D morphology of the bone. These morphological changes affect the force line conduction of the hindfoot/midfoot/forefoot, leading to further morphological alterations. Given that a two-dimensional plane axis overlooks the 3D structural information, it is essential to measure the 3D model of the entire foot in conjunction with the definition under the standing position. This study aims to analyze the morphological changes in flatfoot using 3D measurements from weight-bearing CT (WBCT).MethodIn this retrospective comparative our CT database was searched between 4–2021 and 3–2022. Following inclusion criteria were used: Patients were required to exhibit clinical symptoms suggestive of flatfoot, including painful swelling of the medial plantar area or abnormal gait, corroborated by clinical examination and confirmatory radiological findings on CT or MRI. Healthy participants were required to be free of any foot diseases or conditions affecting lower limb movement. After applying the exclusion criteria (Flatfoot with other foot diseases), CT scans (mean age = 20.9375, SD = 16.1) confirmed eligible for further analysis. The distance, angle in sagittal/transverse/coronal planes, and volume of the two groups were compared on reconstructed 3D models using the t-test. Logistic regression was used to identify flatfoot risk factors, which were then analyzed using receiver operating characteristic curves and nomogram.ResultThe flatfoot group exhibited significantly lower values for calcaneofibular distance (p = 0.001), sagittal and transverse calcaneal inclination angle (p < 0.001), medial column height (p < 0.001), sagittal talonavicular coverage angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.015) Hibb angle. In contrast, the sagittal lateral talocalcaneal angle (p = 0.013), sagittal (p < 0.001) and transverse (p = 0.004) talocalcaneal angle, transverse talonavicular coverage angle (p < 0.001), coronal Hibb angle (p < 0.001), and sagittal (p < 0.001) and transverse (p = 0.001) Meary’s angle were significantly higher in the flatfoot group. The sagittal Hibb angle (B = − 0.379, OR = 0.684) and medial column height (B = − 0.990, OR = 0.372) were identified as significant risk factors for acquiring a flatfoot.ConclusionThe findings validate the 3D spatial position alterations in flatfoot. These include the abduction of the forefoot and prolapse of the first metatarsal proximal, the arch collapsed, subluxation of the talonavicular joint in the midfoot, adduction and valgus of the calcaneus, adduction and plantar ward movement of the talus in the hindfoot, along with the first metatarsal’s abduction and dorsiflexion in the forefoot.

Méary's angle decoded: 3D analysis of first ray plantarflexion deformity in Charcot-marie-tooth disease

BackgroundThe typical cavovarus deformity seen in patients with Charcot-Marie-Tooth (CMT) involves plantarflexion of the first ray. The exact apex of the deformity has never been proven, although it is presumed to be within the medial cuneiform. The aim of this study was to utilize weight-bearing computed tomography (WBCT) to localize and quantify first ray plantarflexion deformity in CMT patients. MethodsWBCTs of 16 CMT patients with lateral Méary’s angle > 20 degrees were compared to controls utilizing semi-automated analysis software. A local coordinate system based on the first metatarsal was used to avoid bias of proximal deformity. The tarsometatarsal angle was subdivided into components (cuneiform-cuneiform joint normal, tarsometatarsal joint and metatarsal-metatarsal joint normal) and compared between CMT and controls. CMT patient’s first, second and third rays were also compared. Means were compared with a 2-sample t test (p < .05). ResultsCMT patients had significantly more plantarflexion of the first ray than controls (16.4 versus 8.8 degrees respectively(p < 0.001)). The largest difference of was found at the medial cuneiform with 20.6 degrees of plantarflexion in CMT patients versus 14.8 degrees in controls (p < .0001). There was also approximately 2 degrees of plantarflexion at the TMT joint (p < .001). ConclusionsPlantarflexion deformity in CMT patients is primarily an osseous deformity at the level of the medial cuneiform with a lesser contribution from the tarsometatarsal joint. Level of evidenceIII Retrospective comparative study

Weightbearing Computed Tomography Can Accurately Detect Subtle Lisfranc Injury.

Early detection of Lisfranc injury is critical for improving clinical outcomes, but diagnosing subtle injury can be difficult. Weightbearing computed tomography (WBCT) allows evaluation of such injuries in 3 dimensions (3D) under physiologic load. This study aimed to assess the utility of 1-, 2-, and 3-dimensional measurements on WBCT to diagnose subtle injury in isolated ligamentous Lisfranc injuries. Ten cadaveric specimens underwent WBCT evaluation of the Lisfranc joint complex in the intact state and subsequently with sequential sectioning of the dorsal Lisfranc ligament and interosseous Lisfranc ligament (IOL) to create subtle Lisfranc injury, and finally after transectioning of plantar Lisfranc ligament (PLL) to create the injury conditions for complete ligamentous Lisfranc injury. Measurements under static vertical tibial load of 80 kg were performed on WBCT images including (1) Lisfranc joint (medial cuneiform-base of second metatarsal) volume, (2) Lisfranc joint area, (3) C1-C2 intercuneiform area, (4) C1-M2 distance, (5) C1-C2 distance, (6) M1-M2 intermetatarsal distance, (7) first tarsometatarsal (TMT1) alignment, (8) second tarsometatarsal (TMT2) alignment, (9) TMT1 dorsal step-off distance, and (10) TMT2 dorsal step-off distance. In the subtle Lisfranc injury state, Lisfranc joint volume and area, C1-M2 distance, and M1-M2 distance measurements on WBCT significantly increased, when compared with the intact state (P values .001 to .014). Additionally, Lisfranc joint volume and area, C1-M2 distance, M1-M2 distance, TMT2 alignment, and TMT2 dorsal step-off measurements were increased in the complete Lisfranc injury state. Of all measurements, C1-M2 distance had the largest area under the curve (AUC) of 0.96 (sensitivity = 90%; specificity = 90%), followed by Lisfranc volume (AUC = 0.90; sensitivity = 80%; specificity = 80%) and Lisfranc area (AUC = 0.89; sensitivity = 80%; specificity = 100%). In a cadaveric model we found that WBCT scan can increase the diagnostic accuracy for subtle Lisfranc injury. Among the measurements, C1-M2 distance exhibited the highest level of accuracy. The 2D joint area and 3D joint volume also proved to be accurate, with 3D volume measurements of the Lisfranc joint displaying the most significant absolute difference between the intact state and increasing severity of Lisfranc injury. These findings suggest that 2D joint area and 3D joint volume may have potential as supplementary measurements to more accurately diagnose subtle Lisfranc injuries. WBCT may help surgeons detect subtle Lisfranc injuries.

Weight-Bearing CT for Diseases around the Ankle Joint.

Weight-bearing computed tomography (WBCT) enables acquisition of three-dimensional bony structure images in a physiological weight-bearing position, which is fundamental in understanding the pathologic lesions and deformities of the ankle joint. Over the past decade, researchers have focused on validating and developing WBCT measurements, which has significantly enhanced our knowledge of common foot and ankle diseases. Consequently, understanding the application of WBCT in clinical practice is becoming more important to produce improved outcomes in the treatment of disease around the ankle joint. This review will describe an overview of what is currently being evaluated in foot and ankle surgery using WBCT and where the course of research will be heading in the future.

Hindfoot Alignment in Flexible Cavovarus Deformity Under Orthostatic and Coleman Block Test Positions: A Weightbearing Computed Tomography Study.

Flexible cavovarus deformity is prevalent and the Coleman block test is frequently used to assess the first ray plantarflexion malpositioning in the overall deformity as well as the flexibility of the hindfoot. The objective was to assess and compare the weightbearing computed tomography (WBCT) 3-dimensional (3D) changes in clinical and bone alignment in flexible cavovarus deformity patients when performing the Coleman block test when compared to normal standing position and to controls. Twenty patients (40 feet) with flexible cavovarus deformity and 20 volunteer controls (40 feet) with normal foot alignment underwent WBCT imaging of the foot and ankle. Cavovarus patients were assessed in normal orthostatic and Coleman block test positions. Foot and ankle offset (FAO), hindfoot alignment angle (HAA), talocalcaneal angle (TCA), subtalar vertical angle (SVA) and talonavicular coverage angle (TNCA) and a CT-simulated soft tissue envelope image, WBCT clinical hindfoot alignment angle (WBCT-CHAA), were evaluated by 2 readers. Measurements were compared between cavovarus nonstressed and stressed positions and to controls. P values of .05 or less were considered significant. The intra- and interobserver intraclass correlation coefficient were good or excellent for all WBCT measurements. Cavovarus patients demonstrated significant correction of WBCT-CHAA (9.7 ± 0.4 degrees), FAO (2.6 ± 0.4%), and TNCA (8.8 ± 1.8 degrees) when performing the Coleman block test (all P values <.0001). However, WBCT-CHAA and FAO measurements were still residually deformed and significantly different from controls (P values of .001 and <.0001, respectively). TNCA values corrected to values similar to healthy controls (P = .29). No differences were observed in cavovarus patients during Coleman block test for the coronal measures: HAA, TCA, and SVA measurements. In this study, we observed improvement in the overall 3D WBCT alignment (FAO), axial plane adduction deformity (TNCA), as well as CT simulated clinical hindfoot alignment (WBCT-CHAA) in flexible cavovarus deformity patients when performing a Coleman block test. However, we did not find improvement in measures of coronal alignment of the hindfoot, indicating continued varus positioning of the hindfoot in these patients.

Radiologic and Clinical Outcomes of the Dovetailed Notch Scarf Osteotomy for Correcting the First Metatarsal Pronation in Moderate to Severe Hallux Valgus Deformity: A Comparative Study.

The traditional scarf osteotomy (TSO) has limited ability to correct the first metatarsal pronation. A novel modification that we refer to as a "dovetailed notch scarf osteotomy" (DNSO) has been developed to enhance the ability to correct coronal plane pronation. The study aimed to observe and compare TSO to DNSO in the treatment of moderate to severe hallux valgus deformity. This retrospective study included 78 feet that had a TSO and 105 feet that had a DNSO. Minimum follow-up was 24 months. Weightbearing computed tomography (WBCT) and weightbearing anterior-posterior (AP) radiographs were taken preoperatively and at the last follow-up. We measured the intermetatarsal angle (IMA), hallux valgus angle, distal metatarsal articular surface angle on AP radiographs and first metatarsal coronal pronation angle (α angle), tibial sesamoid coronal grading, and first metatarsal length on WBCT. Clinical assessment was done using visual analog scale (VAS), American Orthopaedic Foot & Ankle Society (AOFAS) ankle-hindfoot scale, Foot and Ankle Ability Measure (FAAM), and the 36-Item Short Form Health Survey (SF-36). The occurrence of postoperative complications was also documented. The DNSO group exhibited a significantly higher correction amount of α angle and IMA (14.3 ± 9.9 and 10.3 ± 4.6 degrees) than the TSO group (8.6 ± 5.9 and 5.4 ± 5.9 degrees) during the final follow-up assessment (P < .05).The DNSO group (10.1 [8.0-12.0] degrees and 4.8 [3.9-5.6] degrees) demonstrated significantly smaller α angle and IMA compared with the TSO group (4.8 [3.9-5.6] degrees and 9.5 [7.5-11.5] degrees) at 24 months postsurgery (P < .05). The postoperative FAAM activities of daily living and SF-36 physical functioning scores were significantly higher in the DNSO group (97.2 ± 3.3 and 95.7 ± 4.4 points) compared with the TSO group (92.3 ± 3.3 and 87.7 ± 8.7 points) (P < .05). Additionally, hallux varus occurred in 1 case in the DNSO group, whereas 4 cases were observed in the TSO group. Two osteotomy methods can effectively correct moderate to severe hallux valgus deformity. Compared with the TSO, the DNSO has stronger correction ability. The most crucial aspect lies in its controllability when correcting first metatarsal pronation and addressing IMA. Level III, retrospective comparative study.

Correction of progressive collapsing foot deformity classes after isolated arthroscopic subtalar arthrodesis

IntroductionSubtalar osteoarthritis in the context of flatfoot (recently renamed Progressive Collapsing Foot Deformity (PCFD)) may be treated through subtalar joint (SJ) arthrodesis with anticipated consequences on three-dimensional bony configuration. This study investigates the correction of PCFD-related deformities achieved after Anterolateral Arthroscopic Subtalar Arthrodesis (ALAPSTA). MethodsIn this retrospective study, we evaluated pre- and post-operative (at 6 months) weight bearing computed tomography (WBCT) images of patients diagnosed with PCFD with a degenerated SJ (2 A according to PCFD classification) and/or peritalar subluxation (2D) with or without associated flexible midfoot and/or forefoot deformities (1B, 1 C and 1E) which underwent ALAPSTA as a standalone procedure between 2017 and 2020. Multiple measurements were used to assess and compare pre and post-operative PCFD classes. ResultsThirtythree PCFD (33 patients, median age 62) were included in the study. Preoperative medial facet subluxation was 28.3 % (IQR, 15.1 to 49.3 %). Overall PCFD 3D deformity improved with a reduction of the foot and ankle offset from 9.3 points (IQR, 7.8 to 12) to 4 (IQR, 0.9 to 7) (p < 0.001). Class A-hindfoot valgus (median tibiocalcaneal angle and median calcaneal moment arm improved by 9.4 degrees (p < 0.001) and 11 mm (p < 0.001), respectively), class B-midfoot abduction (median talonavicular coverage angle improved by 20.5 degrees, p < 0.001) and class C-forefoot varus (median sagittal talo-first metatarsal angle improved by 10.2 degrees (p < 0.001)) were significantly corrected after surgery. Class D was difficult to assess due to the fusion procedure. No patient had a pre-operative valgus deformity at the ankle (no class E), and no significant change of the talar tilt was observed (p = 0.12). ConclusionIn this series, ALAPSTA performed as a standalone procedure to treat patients diagnosed with PCFD with a degenerated subtalar joint and/or peritalar subluxation was effective not only at correcting hindfoot alignment but also flexible midfoot abduction and flexible forefoot varus. Level of evidenceLevel IV, case series

Recent Innovations Brought about by Weight-Bearing CT Imaging in the Foot and Ankle: A Systematic Review of the Literature

The decade from 2010–2020 has seen the development of cone beam weight-bearing CT (WBCT) as a major innovation in the foot and ankle realm, becoming an important modality for bone and joint imaging. The ability to provide three-dimensional images of the naturally loaded skeleton has enabled several subsequent innovations to arise with aims to hasten image processing and to extend the clinical applications of WBCT. The objective of this work was to identify, categorize and explain those emerging techniques. We performed a structured review of the literature according to PRISMA standards, finally including 50 studies. We subsequently proposed a classification of these techniques. Segmentation and distance mapping were identified as key features. We conclude that although WBCT has already been adopted in a number of clinical communities with an immediate improvement in patient workflows, adoption of advanced techniques is yet to come. However, that relies mostly not on the technology itself, but on improvements in AI software allowing practitioners to quickly process images in daily practice and enabling the clinicians to obtain an accurate three-dimensional evaluation of the segment considered. Standardization will be paramount to amass large amounts of comparable data, which will fuel further innovations in a potentially virtuous circle.

FOREFOOT MORPHOTYPES IN CAVOVARUS FEET: A NOVEL CLASSIFICATION

BackgroundThe cavovarus foot is a complex 3-dimensional deformity. Although a multitude of techniques are described for its surgical management, few of these are evidence based or guided by classification systems. Surgical management involves realignment of the hindfoot and soft tissue balancing, followed by forefoot balancing. Our aim was to classify the pattern of residual forefoot deformities once the hindfoot is corrected, to guide forefoot correction.MethodsWe included 20 cavovarus feet from adult patients with Charcot-Marie-Tooth who underwent weightbearing CT (mean age 43.4 years, 14 males). Patients included had flexible deformities, with no previous surgery. Previous work established majority of rotational deformity in cavovarus feet occurs at the talonavicular joint, which is often reduced during surgery. Using specialised software (Bonelogic 2.1, Disior) a 3-dimensional, virtual model was created. Using data from normal feet as a guide, the talonavicular joint of the cavovarus feet was digitally reduced to a ‘normal’ position. Models of the corrected position were exported and geometrically analysed using Blender 3.6 to identify anatomical trends.ResultsWe identified 3 types of cavovarus forefoot morphotypes. Type 1 was seen in 13 cases (65%) and was defined as a foot where only the first metatarsal was relatively plantarflexed to the rest of the foot, with no significant residual adduction after talonavicular correction. Type 2 was seen in 4 cases (20%) and was defined as a foot where the second and first metatarsals were progressively plantarflexed, with no significant adduction. Type 3 was seen in 3 cases (15%) and was defined as a foot where the metatarsals were still adducted after talonavicular de-rotation.ConclusionWe classify 3 forefoot morphotypes in cavovarus feet. It is important to recognise and anticipate the residual forefoot deformities after hindfoot correction as different treatment strategies may be required for different morphotypes to achieve balanced correction.

IMPACTION BONE GRAFTING OF LARGE DEFECTS IN ANKLE AND HINDFOOT FUSIONS

BackgroundAnkle and hindfoot fusion in the presence of large bony defects represents a challenging problem. Treatment options include acute shortening and fusion or void filling with metal cages or structural allograft, which both have historically low union rates. Impaction grafting is an alternative option.MethodsA 2 centre retrospective review of consecutive series of 32 patients undergoing hindfoot fusions with impaction bone grafting of morselised femoral head allograft to fill large bony void defects was performed. Union was assessed clinically and with either plain radiography or weightbearing CT scanning. Indications included failed total ankle replacement (24 patients), talar osteonecrosis (6 patients) and fracture non-union (2 patients). Mean depth of the defect was 29 ±10.7 mm and mean maximal cross-sectional area was 15.9 ±5.8 cm2. Tibiotalocalcaneal (TTC) arthrodesis was performed in 24 patients, ankle arthrodesis in 7 patients and triple arthrodesis in 1 patient.ResultsMean age was 57 years (19–76 years). Mean follow-up of 22.8 ±8.3 months. 22% were smokers. There were 4 tibiotalar non-unions (12.5%), two of which were symptomatic. 10 TTC arthrodesis patients united at the tibiotalar joint but not at the subtalar joint (31.3%), but only two of these were symptomatic. The combined symptomatic non-union rate was 12.5%. Mean time to union was 9.6 ±5.9 months. One subtalar non-union patient underwent re-operation at 78 months post-operatively after failure of metalwork. Two (13%) patients developed a stress fracture above the metalwork that healed with non-operative measures. There was no bone graft collapse with all patients maintaining bone length.ConclusionImpaction of morselised femoral head allograft can be used to fill large bony voids around the ankle and hindfoot when undertaking arthrodesis, with rapid graft incorporation and no graft collapse despite early loading. This technique offers satisfactory union outcomes without the need for shortening or synthetic cages.

Correlation of Clinical Outcomes and Relative Position of the First Metatarsal After the Modified Lapidus Procedure.

Hallux valgus is a complex 3-dimensional deformity, and the modified Lapidus is a commonly used procedure to correct moderate to severe cases. Shortening and elevation of the first ray can occur with this procedure, which may result in increased pressure on the lesser metatarsal heads. However, there is currently no consensus regarding an accepted length and elevation of the first ray following the modified Lapidus. Therefore, the purpose of this study is to evaluate the impact of the position of the first ray on patient-reported outcome measures. This retrospective study identified 68 patients (72 feet) who underwent the modified Lapidus bunionectomy over a 4-year period at a single institution with a median follow-up of 24 months (range, 11-35.6 months). Patients were included if they were over 18 years of age, had pre- and postoperative weightbearing computed tomography (WBCT) scans, and preoperative and minimum 1-year postoperative Patient-Reported Outcome Measurement Information System (PROMIS) scores. PROMIS scores from 6 domains including physical function, pain interference, pain intensity, global physical health, global mental health, and depression were evaluated and compared pre- and postoperatively. Radiographic parameters were measured and compared before and after surgery. Paired t tests were used to evaluate the significance of pre- to postoperative changes. Differences between cohorts were compared using Mann-Whitney U test for continuous variables or Fisher exact test for categorical variables. Correlation between radiographic measurements and patient-reported outcomes were assessed using the Spearman rank rho estimate and visualized with scatterplots with a linear regression. PROMIS physical function, pain interference, pain intensity, and global physical health improved significantly following the modified Lapidus (all P < .001); however, scores did not show any significant correlation with shortening of the first ray up to a maximum shortening of 4.8 mm. The length of the first metatarsal relative to the second decreased by an average of 2.7 mm following the procedure when measured on WBCT (P < .001), and 2.6 mm when measured on plain radiographs (P < .001). No significant elevation of the first ray was observed postoperatively. This study revealed that the Lapidus bunionectomy resulted in significantly improved pain and physical function at short-term follow-up. The amount of first ray shortening and elevation that occurred in this cohort did not adversely affect patient-reported outcomes.

Accuracy of Volumetric Bone Mineral Density Measurement in Weight Bearing, Cone Beam Computed Tomography

Background: Weight bearing computed tomography (WBCT) utilizes cone beam CT technology to provide assessments of lower limb joint structures while they are functionally loaded. Grey-scale values indicative of X-ray attenuation that are output from cone beam CT are challenging to calibrate, and their use for bone mineral density (BMD) measurement remains debatable. To determine whether WBCT can be reliably used for cortical and trabecular BMD assessment, we sought to establish the accuracy of BMD measurements at the knee using modern WBCT by comparing them to measurements from conventional CT.Methods: A hydroxyapatite phantom with three inserts of varying densities was used to systematically quantify signal uniformity and BMD accuracy across the acquisition volume. We evaluated BMD in vivo (n = 5, female) using synchronous and asynchronous calibration techniques in WBCT and CT. To account for variation in attenuation along the height (z-axis) of acquisition volumes, we tested a height-dependent calibration approach for both WBCT and CT images.Results: Phantom BMD measurement error in WBCT was as high as 15.3% and consistently larger than CT (up to 5.6%). Phantom BMD measures made under synchronous conditions in WBCT improved measurement accuracy by up to 3% but introduced more variability in measured BMD. We found strong correlations (R = 0.96) as well as wide limits of agreement (-324 mgHA/cm3 to 183 mgHA/cm3) from Bland-Altman analysis between WBCT and CT measures in vivo that were not improved by height-dependent calibration.Conclusion: Whilst BMD accuracy from WBCT was found to be dependent on apparent density, accuracy was independent of the calibration technique (synchronous or asynchronous) and the location of the measurement site within the field of view. Overall, we found strong correlations between BMD measures from WBCT and CT and in vivo measures to be more accurate in trabecular bone regions. Importantly, WBCT can be used to distinguish between anatomically relevant differences in BMD, however future work is necessary to determine the repeatability and sensitivity of BMD measures in WBCT.

FIRST METATARSAL ROTATION AFTER SCARF OSTEOTOMY FOR HALLUX VALGUS

IntroductionRecurrence after surgical correction of hallux valgus may be related to coronal rotation of the first metatarsal. The scarf osteotomy is a commonly used procedure for correcting hallux valgus but has limited ability to correct rotation. Using weightbearing computed tomography (WBCT), we aimed to measure the coronal rotation of the first metatarsal before and after a scarf osteotomy, and correlate these to clinical outcome scores.MethodsWe retrospectively analyzed 16 feet (15 patients) who had a WBCT before and after scarf osteotomy for hallux valgus correction. On both scans, hallux valgus angle (HVA), intermetatarsal angle, and anteroposterior/lateral talus-first metatarsal angle were measured using digitally reconstructed radiographs. Metatarsal pronation (MPA), alpha angle, sesamoid rotation angle and sesamoid position was measured on standardized coronal CT slices. Preoperative and postoperative(12 months) clinical outcome scores(MOxFQ and VAS) were captured.ResultsMean HVA was 28.6±10.1 degrees preoperatively and 12.1±7.7 degrees postoperatively. Mean IMA was 13.7±3.8 degrees preoperatively and 7.5±3.0 degrees postoperatively. Before and after surgery, there were no significant differences in MPA (11.4±7.7 and 11.4±9.9 degrees, respectively; p = 0.75) or alpha angle (10.9±8.0 and 10.7±13.1 degrees, respectively; p = 0.83). There were significant improvements in SRA (26.4±10.2 and 15.7±10.2 degrees, respectively; p = 0.03) and sesamoid position (1.4±1.0 and 0.6±0.6, respectively; p = 0.04) after a scarf osteotomy. There were significant improvements in all outcome scores after surgery. Poorer outcome scores correlated with greater postoperative MPA and alpha angles (r= 0.76 (p = 0.02) and 0.67 (p = 0.03), respectively).ConclusionA scarf osteotomy does not correct first metatarsal coronal rotation, and worse outcomes are linked to greater metatarsal rotation. Rotation of the metatarsal needs to be measured and considered when planning hallux valgus surgery. Further work is needed to compare postoperative outcomes with rotational osteotomies and modified Lapidus procedures when addressing rotation.

3D AUTOMATED VERSUS MANUAL ASSESSMENT OF ALIGNMENT IN NORMAL AND CAVUS FEET USING WEIGHT-BEARING CT SCANS: DOES IT DIFFER?

BackgroundThe complex deformities in cavovarus feet may be difficult to assess and understand. Weight-bearing CT (WBCT) is increasingly used to evaluate complex deformities. However, the bone axes may be difficult to calculate in the setting of severe deformity. Computer-assisted 3D-axis calculation is a novel approach that may allow for more accurate assessment of foot alignment / deformity. The aim of this study was to assess differences in measurements done manually on 2D slices of WBCT versus 3D computer models in normal and cavus feet.MethodsWe retrospectively analyzed WBCT scans from 16 normal and 16 cavus feet in patients with Charcot-Marie Tooth. Eight measurements were assessed: Talus-1st metatarsal angle (axial plane), Forefoot arch angle (coronal plane), and Meary's angle, calcaneal pitch, cuneiform to floor, cuneiform to skin, navicular to floor and navicular to skin distance (sagittal plane). 2D measurements were performed manually and 3D measurements were performed using specialised software (BoneLogic, DISIOR).ResultsThere was no significant difference in the measured variables (2D manual versus 3D automated) in normal feet. In the cavus group, 3D assessment calculated increased values for the sagittal angles: Meary's 7.3 degrees greater (p = 0.004), calcaneal pitch 2.4 degrees greater (p = 0.011)), and lower values for the axial talus-1st MT angle, 10.6 degrees less (p = 0.001).ConclusionThere were no significant differences in the normal group. This suggests 3D automated techniques can reliably assess the alignment of bony axes. However, the 3D axis calculations suggest there may be greater sagittal and lesser axial deformity in cavus feet than measured by 2D techniques. This discrepancy may be on account of the rotation seen in cavovarus feet, which may not be readily assessed manually. 3D automated measurements may therefore have a role in better assessing and classifying the cavus foot which may ultimately help inform treatment algorithms.