Weak Strain Research Articles

Mixed fungal strains challenge host resistance: insights into Magnaporthiopsis maydis pathogenicity in maize

Maize late wilt disease, caused by the fungus Magnaporthiopsis maydis, poses a significant threat to susceptible crops. Despite efforts to control it through resistant maize varieties, virulent fungal strains might overcome immunity. This study assessed Israeli M. maydis strains with weak, moderate, and highly pathogenic degrees in two open-air pot trials. Even weak pathogenic strains harmed susceptible cultivars (17% growth suppression and 33% death). In contrast, resistant cultivars were minimally affected, except when exposed to a highly aggressive isolate, resulting in a 5% growth suppression and 11% mortality at harvest. Unexpectedly, in a susceptible cultivar during sprouting, a mixed inoculum with the two more virulent isolates resulted in reduced disease (15%) compared to the highly aggressive strain alone (33%). At harvest (day 84), this pattern was reversed, and adding a weak virulent strain to this combination led to more severe growth (33%) and health (71%) disruption, accompanied by a higher level of M. maydis infection (371% compared to the aggressive strain alone). Similar interactions were found in other strain groups tested. Additionally, some subspecies groups specialize in growth suppression, while others in wilting, suggesting biotrophic/necrotrophic variations. The study revealed complex interactions in mixed populations, emphasizing the destructive potential of the pathogen to resistant cultivars. Understanding the role of maize age-related immunity in disease generation uncovers risks associated with this pathogen.

Elucidating the effect of chitosan microgel characteristics on the large amplitude oscillatory shear (LAOS) behavior of their stabilized high internal phase emulsions using the sequence of physical processes (SPP) approach and comparison with mayonnaise.

Chitosan microgels (h-CSMs) were prepared by cross-linking hydrophobically modified chitosan with sodium phytate (SP). Emulsions stabilized by h-CSMs with different inter-phase fraction, microgel concentration and cross-linking density were studied of their microstructural and rheological properties. In particular, the large amplitude oscillatory shear (LAOS) of the high internal phase emulsions (HIPEs) stabilized by h-CSMs were systematically analyzed using the Fourier transform with Chebyshev polynomials (FTC) and sequence of physical processes (SPP) methods to explore their nonlinear rheological properties. It was found that the HIPEs showed Type III LOAS response with weak strain overshoot depending on the emulsion parameters and microgel characteristics. The FTC method enabled the extraction of nonlinearity measures at limiting conditions (γ→0, γ→γmax) showing intracycle strain-hardening and intracycle shear thinning of the HIPEs under LOAS. By providing a detailed process of the emulsion microstructure transformation in each oscillation cycle, the SPP analysis showed that the HIPEs underwent a 3-step gradual sequence of physical processes, and magnified the influence of microgel characteristics on the rheology of the HIPEs. Comparing with commercially available traditional and low-fat mayonnaise samples, the h-CSM stabilized HIPEs exhibited higher flow compliance but stronger thixotropic recovery ability.

Phylogenetic analysis reveals genetic characteristics of orf virus F1L and B2L genes in the Fujian province.

This study investigates the molecular epidemiology of orf virus (ORFV) in the Fujian province in 2024, with the goal of gaining insights that can enhance disease prevention and control strategies. This experimental study was conducted from January 2024 through March 2024. The samples, showing suspected orf lesions, tested positive for ORFV via PCR. The ORFV059 (F1L) and ORFV011 (B2L) genes from these samples were cloned and sequenced. Analysis identified 3 ORFV strains: FJ-2401, FJ-2402, and FJ-2403. For the F1L gene, nucleotide sequence identity ranged from 95.7% to 99.6%, and amino acid identity ranged from 95.0% to 99.7% compared to the reference strain. These strains were closely related to others from Fujian, Guangzhou, and India but differed from the NZ2 reference strain, the German D1701 weak strain, and Chinese vaccine strains, which were in separate branches. For the B2L gene, nucleotide identity ranged from 97.4% to 99.6%, and amino acid identity ranged from 97.1% to 100%. Evolutionary analysis indicated potential recombination events with strains from Fujian, Jilin, and India. The B2L gene showed distinct branching from the German D1701 weak strain, Fujian GO strain, and Chinese vaccine strains, suggesting that current vaccines might be inadequate. Viruses are constantly evolving, and currently available commercial vaccines may not provide sufficient protection against emerging ORFV strains. This underscores the urgent need for updated vaccines and improved management strategies. The study reveals significant genetic diversity and potential recombination in ORFV strains in Fujian, highlighting their divergence from known references.

Effect of deep eutectic solvents on vulcanization kinetics and strain-softening behavior of natural rubber/styrene-butadiene rubber

Effect of deep eutectic solvents on vulcanization kinetics and strain-softening behavior of natural rubber/styrene-butadiene rubber

High-performance volatile organic compounds free silica-filled butadiene rubber green nanocomposites using ionic liquid peroxide vulcanization

High-performance volatile organic compounds free silica-filled butadiene rubber green nanocomposites using ionic liquid peroxide vulcanization

N-glycosylation of the envelope glycoprotein I is essential for the proliferation and virulence of the duck plague virus

Duck plague virus (DPV) causes the highly pathogenic duck plague, and the envelope glycoprotein I (gI), as one of the key virulence genes, has not yet had its critical virulence sites identified through screening. This study used reverse genetics technology to target the gI, specifically within the DPV genome. Four DPV mutants with gI N-glycosylation site mutations were designed and constructed, and these mutant strains were successfully rescued. Our results confirmed that three asparagine residues of gI (N69, N78, and N265) are N-glycosylation sites, and western blot analysis substantiated that glycosylation at each predicted N-glycosylation site was compromised. The deglycosylation of gI leads to the protein misfolding and subsequent retention in the endoplasmic reticulum (ER). The subsequent deglycosylated gI is carried into the Golgi apparatus (GM130) in the interaction of gE. Compared to the parental virus, the mutated virus shows a 66.3% reduction in intercellular transmission capability. In ducks, the deglycosylation of gI significantly reduces DPV replication in vivo, thereby weakening the virulence of DPV. This study represents the first successful creation of a weak DPV virus strain by specific mutation at the N-glycosylation site. The findings provide a foundational understanding of DPV pathogenesis and form the basis for developing live attenuated vaccines against the disease.

Boosting Acidic Hydrogen Evolution Kinetics Induced by Weak Strain Effect in PdPt Alloy for Proton Exchange Membrane Water Electrolyzers.

Strain engineering is an effective strategy for manipulating the electronic structure of active sites and altering the binding strength toward adsorbates during the hydrogen evolution reaction (HER). However, the effects of weak and strong strain engineering on the HER catalytic activity have not been fully explored. Herein, the core-shell PdPt alloys with two-layer Pt shells (PdPt2L) and multi-layer Pt shells (PdPtML) is constructed, which exhibit distinct lattice strains. Notably, PdPt2L with weak strain effect just requires a low overpotential of 18mV to reach 10mA cm-2 for the HER and shows the superior long-term stability for 510h with negligible activity degradation in 0.5M H2SO4. The intrinsic activity of PdPt2L is 6.2 and 24.5 times higher than that of PdPtML and commercial Pt/C, respectively. Furthermore, PdPt2L||IrO2 exhibits superior activity over Pt/C||IrO2 in proton exchange membrane water electrolyzers and maintains stable operation for 100h at large current density of 500mA cm-2. In situ/operando measurements verify that PdPt2L exhibits lower apparent activation energy and accelerated ad-/desorption kinetics, benefiting from the weak strain effect. Density functional theory calculations also reveal that PdPt2L displays weaker H* adsorption energy compared to PdPtML, favoring for H* desorption and promoting H2 generation.

Unveiling the genetic landscape of Streptococcus agalactiae bacteremia: emergence of hypervirulent CC1 strains and new CC283 strains in Tehran, Iran

BackgroundThe emergence of Streptococcus agalactiae infections in patients with bacteremia is increasing. It is crucial to investigate the epidemiology, molecular characteristics, biofilm status, and virulence analysis of Streptococcus agalactiae in these patients.MethodsIn this cross-sectional study, 61 S. agalactiae isolated from blood infection were subjected to characterization through antimicrobial susceptibility tests, biofilm formation, multilocus sequence typing (MLST), and PCR analysis for detecting resistance (tet and erm family) and virulence genes (alp2/3, alp4, bca, bac, eps, rib, lmb, cylE, and pilus island genes).ResultsOverall, 32.7% of the isolates demonstrated an inducible clindamycin resistance phenotype. The results showed that 49.2, 24.6, and 8.2% of confirmed Streptococcus agalactiae strains were classified as strong, intermediate, and weak biofilm-forming strains, respectively. tet(M) (57.1%) was recovered most, followed by tet(M) + tet(L) (14.3%), tet(S) + tet(K) (10.7%), tet(M) + tet(K) (8.9%), tet(M) + tet(K) + tet(O) (5.4%), and tet(S) + tet(L) + tet(O) (3.6%). Three virulence gene profiles of cylE, lmb, bca, rib (24.6%; 15/61), cylE, lmb, rib, alp3 (19.7%; 12/61), and cylE, lmb, bac, rib (16.4%; 10/61) were detected in approximately two-thirds of the isolates. MLST revealed that the 61 isolates belonged to six clonal complexes, including CC1 (49.2%), followed by CC12 (18%), CC19 (13.1%), CC22 (9.8%), CC17 (6.6%), and CC283 (3.3%), and 11 different sequence types (STs), including ST1 (24.6%), ST7 (14.8%), ST918 (13.1%), ST2118 (9.8%), ST19 (9.8%), ST48 (6.6%), ST1372 (4.9%), ST22 (4.9%), ST40 (4.9%), ST734 (3.3%), and ST283 (3.3%). Remarkably, all CC1 and CC12 isolates, three-fourths of CC19, and half of CC22 were confirmed as biofilm producers. Conversely, CC17 and CC28 isolates were found to be nonproducers. The occurrence of strong biofilm formation was limited to specific CCs, namely CC1 (34.4%), CC12 (8.2%), CC19 (3.3%), and CC22 (3.3%).ConclusionThe high prevalence of CC1 and CC12 clones among S. agalactiae strains reflects the emergence of these lineages as successful clones in Iran, which is a serious concern and poses a potential threat to patients.

Electronic structure of ultrathin single-walled platinum nanotubes

Electronic structure of ultrathin single-walled platinum nanotubes

Modulation of acid-induced pea protein gels by gellan gum and glucono-δ-lactone: Rheological and microstructural insights

This study investigated the effect of gellan gum (GG) and glucono-δ-lactone (GDL) on the acid-induced gel properties of pea protein isolate (PPI) pretreated with media milling. The inclusion of GG substantially enhanced the gel hardness of PPI gel from 18.69g to 792.47g though slightly reduced its water holding capacity (WHC). Rheological analysis showed that GG increased storage modulus (G') and decreased damping factor of gels in the small amplitude oscillatory shear region and transformed its strain thinning behavior into weak strain overshoot behavior in the large amplitude oscillatory shear region. SEM revealed that GG transformed the microstructure of gel from a uniform particle aggregate structure to a chain-like architecture composed of filaments with small protein particles attached. Turbidity and zeta potential analysis showed that GG promoted the transformation of PPI from a soluble polymer system to an insoluble coagulant during acidification. When GG content was relatively high (0.2%-0.3%), high GDL content increased the electrostatic interaction between PPI and GG molecules, causing their rapid aggregation into a dense irregular aggregate structure, further enhancing gel strength and WHC. Overall, GG and GDL can offer the opportunity to modulate the microstructure and gel properties of acid-induced PPI gels, presenting potential for diversifying food gel design strategies through PPI-GG hybrid systems.

Structure-property relations in rheology of cellulose nanofibrils-based hydrogels

Hydrogels prepared from self-assembled cellulose nanofibrils (CNFs) are widely used in biomedicine, electronics and environmental technology. Their ability to serve as inks for extrusion-based 3D printing is conventionally evaluated by means of rheological tests. A model is developed that describes the response of CNF gels in small- and large-amplitude oscillatory tests in a unified manner. The model involves a reasonably small number of material parameters, ensures good agreement between results of simulation and observations in oscillatory tests and correctly predicts the stress-strain Lissajous curves, experimental data in hysteresis loop tests, and measurements of the steady-state viscosity. The model is applied to analyze how composition and preparation conditions for CNF gels affect transition from shear thinning to weak strain overshoot in large-amplitude shear oscillatory tests. Based on the model, simple relations are derived for the fractal dimension of CNF clusters and the storage modulus of gels prepared in aqueous solutions of multivalent salts. The validity of these equations is confirmed by comparison of their predictions with observations in independent tests.

Strain rate dependence of mechanical behavior in an AlSi10Mg alloy with different states fabricated by laser powder bed fusion

Strain rate dependence of mechanical behavior in an AlSi10Mg alloy with different states fabricated by laser powder bed fusion

Impact of an oligomer deep eutectic solvent on structure and properties of natural rubber vulcanizates and their nanocomposites

AbstractRubber nanocomposites exhibit strain softening under large‐amplitude oscillation shear and large‐strain cyclic tension while the softening behaviors are hard to regulate in industry. Herein, an oligomer deep eutectic solvent (DES) synthesized from polyethyleneglycol and tetrabutylammonium bromide is used to mediate the vulcanization and softening behaviors of natural rubber (NR) gums and their nanocomposites. The results show that DES could accelerate NR vulcanization and improve crosslinking density. For the hydrophilic silica nanocomposites, DES could greatly reduce tanδ and weaken weak strain overshoot accompanying Payne and lower percentages damping accompanying Mullins effects. The effects in nanocomposites filled with hydrophilic/hydrophobic silica and carbon black are investigated and compared. The investigation provides a new way for tailoring elasticity and dissipation of vulcanizate nanocomposites filled with hydrophilic silica.

Radio frequency drying on functional diversity of tiger nut flour: Effects on physicochemical, structural, and rheological properties

Tiger nut (TN) is a valuable nutrient and gluten-free tuber. To achieve high-quality TN flour as functional ingredients in food, it is essential to develop effective drying technologies for TN. Five drying methods including natural drying (Control), hot-air drying (HD), radio frequency single drying (RFSD), RF assisted hot-air drying (RFHD), and RF- vacuum drying (RFVD) were selected and compared to determine their effects on physiochemical, structural, and rheological properties of TN flour. Results showed that RF drying (RFD) significantly improved the hydration, oil-absorbing, and antioxidant activity capacity, especially for RFVD. RFHD exhibited greater color (BI=13.80±0.05 and C=10.26±0.05) and reducing sugar content (253.50±2.27mg d.b.) than RFSD and RFVD. The gelatinization temperature, enthalpy value, and particle size (57.30-269.33μm) of TN flour were reduced. The structural property results indicated that RFD reduced the relative crystallinity and short-range ordering of the flour, altered protein secondary structure, and caused the damaged microstructure in comparison with Control and HD groups. All sample gels exhibited a weak strain overshoot behavior (type III) under large amplitude oscillations, and RFD resulted in a reduced viscoelastic behavior. RFD could be an effective method to produce functional TN flour.

Influence of SiC particles on the microstructure and mechanical behaviors of AlMgScZr alloy processed by laser powder bed fusion

Influence of SiC particles on the microstructure and mechanical behaviors of AlMgScZr alloy processed by laser powder bed fusion

Ultrasensitive Mechanical Sensor Using Tunable Ordered Array of Metallic and Insulating States in Vanadium Dioxide

Abstract Detecting tiny deformations or vibrations, particularly those associated with strains below 1%, is essential in various technological applications. Traditional intrinsic materials, including metals and semiconductors, face challenges in simultaneously achieving initial metallic state and strain-induced insulating state, hindering the development of highly sensitive mechanical sensors. Here we report an ultrasensitive mechanical sensor based on a strain-induced tunable ordered array of metallic and insulating states in the single-crystal bronze-phase vanadium dioxide [VO2(B)] quantum material. It is shown that the initial metallic state in the VO2(B) flake can be tuned to the insulating state by applying a weak uniaxial tensile strain. Such a unique property gives rise to a record-high gauge factor of above 607970, surpassing previous values by an order of magnitude, with excellent linearity and mechanical resilience as well as durability. As a proof-of-concept application, we use our proposed mechanical sensor to demonstrate precise sensing of the micro piece, gentle airflows and water droplets. We attribute the superior performance of the sensor to the strain-induced continuous metal-insulator transition in the single-crystal VO2(B) flake, evidenced by experimental and simulation results. Our findings highlight the potential of exploiting correlated quantum materials for next-generation ultrasensitive flexible mechanical sensors, addressing critical limitations in traditional materials.

Developing Zn-2Cu-xLi (x < 0.1 wt %) alloys with suitable mechanical properties, degradation behaviors and cytocompatibility for vascular stents

Biodegradable Zn alloys show great potential for vascular stents due to their moderate degradation rates and acceptable biocompatibility. However, the poor mechanical properties limit their applications. In this study, low alloyed Zn-2Cu-xLi (x = 0.004, 0.01, 0.07 wt%) alloys with favorable mechanical properties were developed. The microstructure consists of fine equiaxed η-Zn grains, micron, submicron-sized and coherent nano ε-CuZn4 phases. The introduced Li exists as a solute in the η-Zn matrix and ε-CuZn4 phase, and results in the increase of ε-CuZn4 volume fraction, the refinement of grains and more uniform distribution of grain sizes. As Li content increases, the strength of alloys is dramatically improved by grain boundary strengthening, precipitate strengthening of ε-CuZn4 and solid solution strengthening of Li. Zn-2Cu-0.07Li alloy has the optimal mechanical properties with a tensile yield strength of 321.8 MPa, ultimate tensile strength of 362.3 MPa and fracture elongation of 28.0%, exceeding the benchmark of stents. It also has favorable mechanical property stability, weak tension compression yield asymmetry and strain rate sensitivity. It exhibits uniform degradation and a little improved degradation rate of 89.5 μm∙year-1, due to the improved electrochemical activity by increased ε-CuZn4 volume fraction, and generates Li2CO3 and LiOH. It shows favorable cytocompatibility without adverse influence on endothelial cell viability by trace Li+. The fabricated microtubes show favorable mechanical properties, and stents exhibit an average radial strength of 118 kPa. The present study indicates that Zn-2Cu-0.07Li alloy is a potential and promising candidate for vascular stent applications. STATEMENT OF SIGNIFICANCE: Zn alloys are promising candidates for biodegradable vascular stents. However, improving their mechanical properties is challenging. Combining the advantages of Cu and trace Li, Zn-2Cu-xLi (x < 0.1 wt%) alloys were developed for stents. As Li increases, the strength of alloys is dramatically improved by refined grains, increased volume fraction of ε-CuZn4 and solid solution of Li. Zn-2Cu-0.07Li alloy exhibits a TYS exceeding 320 MPa, UTS exceeding 360 MPa and fracture EL of nearly 30%. It shows favorable mechanical stability, degradation behaviors and cytocompatibility. The alloy was fabricated into microtubes and stents for mechanical property tests to verify application feasibility for the first time. This indicates that Zn-2Cu-0.07Li alloy has great potential for vascular stent applications.

Rheology of plant protein–polysaccharide gel inks for 3D food printing: Modeling and structure–property relations

Rheology of plant protein–polysaccharide gel inks for 3D food printing: Modeling and structure–property relations

A gain-of-function mutation in zinc cluster transcription factor Rob1 drives Candida albicans adaptive growth in the cystic fibrosis lung environment.

Candida albicans chronically colonizes the respiratory tract of patients with Cystic Fibrosis (CF). It competes with CF-associated pathogens (e.g. Pseudomonas aeruginosa) and contributes to disease severity. We hypothesize that C. albicans undergoes specific adaptation mechanisms that explain its persistence in the CF lung environment. To identify the underlying genetic and phenotypic determinants, we serially recovered 146 C. albicans clinical isolates over a period of 30 months from the sputum of 25 antifungal-naive CF patients. Multilocus sequence typing analyses revealed that most patients were individually colonized with genetically close strains, facilitating comparative analyses between serial isolates. We strikingly observed differential ability to filament and form monospecies and dual-species biofilms with P. aeruginosa among 18 serial isolates sharing the same diploid sequence type, recovered within one year from a pediatric patient. Whole genome sequencing revealed that their genomes were highly heterozygous and similar to each other, displaying a highly clonal subpopulation structure. Data mining identified 34 non-synonymous heterozygous SNPs in 19 open reading frames differentiating the hyperfilamentous and strong biofilm-former strains from the remaining isolates. Among these, we detected a glycine-to-glutamate substitution at position 299 (G299E) in the deduced amino acid sequence of the zinc cluster transcription factor ROB1 (ROB1G299E), encoding a major regulator of filamentous growth and biofilm formation. Introduction of the G299E heterozygous mutation in a co-isolated weak biofilm-former CF strain was sufficient to confer hyperfilamentous growth, increased expression of hyphal-specific genes, increased monospecies biofilm formation and increased survival in dual-species biofilms formed with P. aeruginosa, indicating that ROB1G299E is a gain-of-function mutation. Disruption of ROB1 in a hyperfilamentous isolate carrying the ROB1G299E allele abolished hyperfilamentation and biofilm formation. Our study links a single heterozygous mutation to the ability of C. albicans to better survive during the interaction with other CF-associated microbes and illuminates how adaptive traits emerge in microbial pathogens to persistently colonize and/or infect the CF-patient airways.

Tailoring microstructures of oleogel-based HIPEs to modulate oral processing properties: Rheology, tribology and mastication effects

Tailoring microstructures of oleogel-based HIPEs to modulate oral processing properties: Rheology, tribology and mastication effects