Weak Base Drugs Research Articles

Exploring the Relationship of Drug BCS Classification, Food Effect, and Gastric pH-Dependent Drug Interactions.

Food effect (FE) and gastric pH-dependent drug-drug interactions (DDIs) are both absorption-related. Here, we evaluated if Biopharmaceutics Classification System (BCS) classes may be correlated with FE or pH-dependent DDIs. Trends in FE data were investigated for 170 drugs with clinical FE studies from the literature and new drugs approved from 2013 to 2019 by US Food and Drug Administration. A subset of 38 drugs was also evaluated to determine whether FE results can inform the need for a gastric pH-dependent DDI study. The results of FE studies were defined as no effect (AUC ratio 0.80-1.25), increased exposure (AUC ratio ≥1.25), or decreased exposure (AUC ratio ≤0.8). Drugs with significantly increased exposure FE (AUC ratio ≥2.0; N=14) were BCS Class 2 or 4, while drugs with significantly decreased exposure FE (AUC ratio ≤0.5; N=2) were BCS Class 1/3 or 3. The lack of FE was aligned with the lack of a pH-dependent DDI for all 7 BCS Class 1 or 3 drugs as expected. For the 13 BCS Class 2 or 4 weak base drugs with an increased exposure FE, 6 had a pH-dependent DDI (AUC ratio ≤0.8). Among the 16 BCS Class 2 or 4 weak base drugs with no FE, 6 had a pH-dependent DDI (AUC ratio ≤0.8). FE appears to have limited correlation with BCS classes except for BCS Class 1 drugs, confirming that multiple physiological mechanisms can impact FE. Lack of FE does not indicate absence of pH-dependent DDI for BCS Class 2 or 4 drugs. Graphical Abstract.

Improved Bioavailability of Poorly Water-Soluble Drug by Targeting Increased Absorption through Solubility Enhancement and Precipitation Inhibition

Itraconazole (ITZ) is a class II drug according to the biopharmaceutical classification system. Its solubility is pH 3-dependent, and it is poorly water-soluble. Its pKa is 3.7, which makes it a weak base drug. The aim of this study was to prepare solid dispersion (SD) pellets to enhance the release of ITZ into the gastrointestinal environment using hot-melt extrusion (HME) technology and a pelletizer. The pellets were then filled into capsules and evaluated in vitro and in vivo. The ITZ changed from a crystalline state to an amorphous state during the HME process, as determined using DSC and PXRD. In addition, its release into the gastrointestinal tract was enhanced, as was the level of ITZ recrystallization, which was lower than the marketed drug (Sporanox®), as assessed using an in vitro method. In the in vivo study that was carried out in rats, the AUC0–48h of the commercial formulation, Sporanox®, was 1073.9 ± 314.7 ng·h·mL−1, and the bioavailability of the SD pellet (2969.7 ± 720.6 ng·h·mL−1) was three-fold higher than that of Sporanox® (*** p < 0.001). The results of the in vivo test in beagle dogs revealed that the AUC0–24h of the SD-1 pellet (which was designed to enhance drug release into gastric fluids) was 3.37 ± 3.28 μg·h·mL−1 and that of the SD-2 pellet (which was designed to enhance drug release in intestinal fluids) was 7.50 ± 4.50 μg·h·mL−1. The AUC of the SD-2 pellet was 2.2 times higher than that of the SD-1 pellet. Based on pharmacokinetic data, ITZ would exist in a supersaturated state in the area of drug absorption. These results indicated that the absorption area is critical for improving the bioavailability of ITZ. Consequently, the bioavailability of ITZ could be improved by inhibiting precipitation in the absorption area.

Improving Dissolution Behavior and Oral Absorption of Drugs with pH-Dependent Solubility Using pH Modifiers: A Physiologically Realistic Mass Transport Analysis

Orally dosed drugs must dissolve in the gastrointestinal (GI) tract before being absorbed through the epithelial cell membrane. In vivo drug dissolution depends on the GI tract's physiological conditions such as pH, residence time, luminal buffers, intestinal motility, and transit and drug properties under fed and fasting conditions (Paixão, P. et al. Mol. Pharm. 2018 and Bermejo, et al. M. Mol. Pharm. 2018). The dissolution of an ionizable drug may benefit from manipulating in vivo variables such as the environmental pH using pH-modifying agents incorporated into the dosage form. A successful example is the use of such agents for dissolution enhancement of BCS class IIb (high-permeability, low-solubility, and weak base) drugs under high gastric pH due to the disease conditions or by co-administration of acid-reducing agents (i.e., proton pump inhibitors, H2-antagonists, and antacids). This study provides a rational approach for selecting pH modifiers to improve monobasic and dibasic drug compounds' dissolution rate and extent under high-gastric pH dissolution conditions, since the oral absorption of BCS class II drugs can be limited by either the solubility or the dissolution rate depending on the initial dose number. Betaine chloride, fumaric acid, and tartaric acid are examples of promising pH modifiers that can be included in oral dosage forms to enhance the rate and extent of monobasic and dibasic drug formulations. However, selection of a suitable pH modifier is dependent on the drug properties (e.g., solubility and pKa) and its interplay with the pH modifier pKa or pKas. As an example of this complex interaction, for basic drugs with high pKa and intrinsic solubility values and large doses, a polyprotic pH modifier can be expected to outperform a monoacid pH modifier. We have developed a hierarchical mass transport model to predict drug dissolution of formulations under varying pH conditions including high gastric pH. This model considers the effect of physical and chemical properties of the drug and pH modifiers such as pKa, solubility, and particle size distribution. This model also considers the impact of physiological conditions such as stomach emptying rate, stomach acid and buffer secretion, residence time in the GI tract, and aqueous luminal volume on drug dissolution. The predictions from this model are directly applicable to in vitro multi-compartment dissolution vessels and are validated by in vitro experiments in the gastrointestinal simulator. This model's predictions can serve as a potential data source to predict plasma concentrations for formulations containing pH modifiers administered under the high-gastric pH conditions. This analysis provides an improved formulation design procedure using pH modifiers by minimizing the experimental iterations under both in vitro and in vivo conditions.

Metabolomic profiling of single enlarged lysosomes.

Lysosomes are critical for cellular metabolism and are heterogeneously involved in various cellular processes. The ability to measure lysosomal metabolic heterogeneity is essential for understanding their physiological roles. We therefore built a single-lysosome mass spectrometry (SLMS) platform integrating lysosomal patch-clamp recording and induced nano-electrospray ionization (nanoESI)/mass spectrometry (MS) that enables concurrent metabolic and electrophysiological profiling of individual enlarged lysosomes. The accuracy and reliability of this technique were validated by supporting previous findings, such as the transportability of lysosomal cationic amino acids transporters such as PQLC2 and the lysosomal trapping of lysosomotropic, hydrophobic weak base drugs such as lidocaine. We derived metabolites from single lysosomes in various cell types and classified lysosomes into five major subpopulations based on their chemical and biological divergence. Senescence and carcinoma altered metabolic profiles of lysosomes in a type-specific manner. Thus, SLMS can open more avenues for investigating heterogeneous lysosomal metabolic changes during physiological and pathological processes.

Scalable Production of Lipid Nanoparticles Containing Amphotericin B.

Lipid-based formulations have been developed to improve stability profiles, tolerability, and toxicity profiles of small molecule drugs. However, manufacture of such formulations involving lipophilic compounds can be labor-intensive and difficult to scale because of solubility and solvent compatibility issues. We have developed a rapid and scalable approach using rapid-mixing techniques to generate homogeneous lipid nanoparticle (LNP) formulations of siRNA, triglycerides, and hydrophilic weak-base drugs. Here, we used this approach to entrap a hydrophobic small molecule, Amphotericin B (AmpB), a hydrophobic drug not soluble in ethanol. The three prototypes presented in this study were derived from LNP-siRNA systems, triglyceride nanoparticles, and liposomal systems. Cryogenic transmission electron microscopy (cryo-TEM) revealed that all three LNP-AmpB formulations retain structural characteristics of the parent (AmpB-free) LNPs, with particles remaining stable for at least 1 month. All formulations showed similar in vitro toxicity profiles in comparison to AmBisome. Importantly, the formulations have a 2.5-fold improved IC50 for fungal growth inhibition as compared to AmBisome in in vitro efficacy studies. These results demonstrate that the rapid-mixing technology combined with dimethyl sulfoxide (DMSO) for drugs insoluble in other organic solvents can be a powerful manufacturing method for the generation of stable LNP drug formulations.

Changes in expression of lysosomal membrane proteins in leucocytes of cancer patients treated with tyrosine kinase inhibitors.

Lysosomal sequestration of weak base drugs has been identified as one of the stress-related mechanisms that trigger in vitro lysosomal biogenesis controlled by transcription factor EB (TFEB). Whether such mechanism can induce lysosomal biogenesis in vivo is unknown. In this study, we addressed the question whether prolonged treatment with sunitinib (SUN) in patients with advanced renal cell carcinoma (n = 22) and with imatinib (IM) in those with gastrointestinal stromal tumor (n = 6) could induce lysosomal biogenesis in leukocytes. Lysosomal biogenesis was monitored using immunoblotting of three lysosomal membrane proteins: lysosome-associated membrane proteins 1 and 2 (LAMP1 and LAMP2) and vacuolar H+-ATPase, B2 subunit (ATP6V1B2). Present results indicate that prolonged treatment with SUN affects LAMP1 and LAMP2 expression only marginally in most patients. In contrast, changes in ATP6V1B2 expression were marked and resembled irregular oscillations. Very similar changes in the expression of lysosomal membrane proteins were also found in IM-treated patients. Conclusion: prolonged treatment of cancer patients with SUN and IM did not induce leucocyte lysosomal biogenesis but dramaticallyaffected expression of ATP6V1B2.

Modular solid dosage form design – Application to pH-independent release of a weak-base API

A novel approach to solid dosage form design is investigated, whereby instead of blending the ingredients and subsequently compacting the mixture, the dosage form is made by assembling prefabricated components, each with a specific function. The approach was used to formulate a weak-base API (active pharmaceutical ingredient), such that the modular dosage forms exhibited pH-independent drug release. Tablet-like dosage forms of ciprofloxacin (CPR), used as model weak-base drug, were prepared in order to generate dosage forms exhibiting pH-independent drug release. The dosage forms were made by assembling two types of prefabricated modules onto 3D stacks. The modules were hydroxypropyl methylcellulose circular film wafers, loaded with either CPR or citric acid (CA). CA-wafers served the function of pH-modifier modules in the microenvironment of the dosage form during the dissolution process. In vitro drug release from dosage forms consisting of CA- and CPR-wafers stacked in alternate sequence was compared with the release from assemblies containing CPR-wafers only, under pH = 1.2 and pH = 6.8 conditions. In the absence of CA-wafers, CPR release was ~25-fold slower at pH = 6.8 compared to pH = 1.2. Inclusion of CA-wafers in the dosage form assembly accelerated and decelerated drug release at pH = 6.8 and pH = 1.2, respectively, which resulted in overlapping drug release profiles under the two pH conditions. The two drug release profiles met the criteria for sameness as assessed by the f1 (difference) and f2 (similarity) factors. Modeling of drug release kinetics pointed toward polymer erosion as the primary mechanism of drug release for the overlapping pH = 1.2 and pH = 6.8 profiles. In terms of their drug release properties, the multi-modular dosage form assemblies exhibited the attributes and behavior of single bodies, rather than the combined contributions from multiple individually-operating modules. The initial geometry of the dosage form, characterized by the surface area (SA), volume (V) and SA/V ratio accounted for drug release kinetics in the same fashion as for traditional tablet compacts.

Polymer as precipitation inhibitor of weak base drug: An update and brief review

Polymer as precipitation inhibitor of weak base drug: An update and brief review

Biorelevant dissolution models to assess precipitation of weak base drug

The impact of precipitation can affect the amount of drug absorbed, thereby affecting the amount of drug in the systemic body. The precipitation process is preceded by a supersaturation phase, caused by decreased drug solubility in the gastrointestinal tract. This precipitation occurs for weak base drugs with low solubility. When the drug entering the small intestine, the solubility of weak base drugs decrease, then occurs supersaturation, which leads to precipitation, so that drug precipitation is one of a challenge for the pharmaceutical industry in drug development. Precipitation testing of water-soluble weak base drugs can be carried out by the pH shift method to describe the gastrointestinal pH gradient from gastric to small intestine. This pH change can cause supersaturation and then trigger precipitation, especially for weak base drugs. The methods that can used to assess precipitation drug is modification of the USP dissolution which are two compartment and multi compartment model. The choice of dissolution medium play an important role in the test results. The use of bio relevant medium can produce closer in vitro and in vivo correlations than the use of buffers. Generally, the medium used to simulate the weakly condition in the small intestine is FaSSIF (Fasted State Simulated Intestinal Fluid) or FeSSIF (Fed State Stimulate Intestinal Fluid) medium. The medium used to simulate the acidic condition in the stomach is FaSSGF (Fasted state simulated gastric fluid) or FeSSGF (Fed state simulated gastric fluid) medium.

Bottom-Up Physiologically Based Oral Absorption Modeling of Free Weak Base Drugs.

In this study, we systematically evaluated “bottom-up” physiologically based oral absorption modeling, focusing on free weak base drugs. The gastrointestinal unified theoretical framework (the GUT framework) was employed as a simple and transparent model. The oral absorption of poorly soluble free weak base drugs is affected by gastric pH. Alternation of bulk and solid surface pH by dissolving drug substances was considered in the model. Simple physicochemical properties such as pKa, the intrinsic solubility, and the bile micelle partition coefficient were used as input parameters. The fraction of a dose absorbed (Fa) in vivo was obtained by reanalyzing the pharmacokinetic data in the literature (15 drugs, a total of 85 Fa data). The AUC ratio with/without a gastric acid-reducing agent (AUCr) was collected from the literature (22 data). When gastric dissolution was neglected, Fa was underestimated (absolute average fold error (AAFE) = 1.85, average fold error (AFE) = 0.64). By considering gastric dissolution, predictability was improved (AAFE = 1.40, AFE = 1.04). AUCr was also appropriately predicted (AAFE = 1.54, AFE = 1.04). The Fa values of several drugs were slightly overestimated (less than 1.7-fold), probably due to neglecting particle growth in the small intestine. This modeling strategy will be of great importance for drug discovery and development.

Application of Physiologically-Based Pharmacokinetic Modeling to Predict Gastric pH-Dependent Drug-Drug Interactions for Weak Base Drugs.

Weak‐base drugs are susceptible to drug–drug interactions (DDIs) when coadministered with gastric acid–reducing agents (ARAs). We developed PBPK models to evaluate the potential of such pH‐dependent DDIs for four weak‐base drugs, i.e., tapentadol, darunavir, erlotinib, and saxagliptin. The physiologically‐based pharmacokinetic (PBPK) models of these drugs were first optimized using pharmacokinetic (PK) data following oral administration without ARAs, which were then verified with data from additional PK studies in the presence and absence of food. The models were subsequently used to predict the extent of DDIs with ARA coadministration. Sensitivity analysis was conducted to explore the impact of gastric pH on quantitative prediction of drug exposure in the presence of ARA. The results suggested that the PBPK models developed could adequately describe the lack of the effect of ARA on the PK of tapentadol, darunavir, and saxagliptin and could qualitatively predict the effect of ARA in reducing the absorption of erlotinib. Further studies involving more drugs with positive pH‐dependent DDIs are needed to confirm the findings and broaden our knowledge base to further improve the utilization of PBPK modeling to evaluate pH‐dependent DDI potential.

The Lysosomotropic Activity of Hydrophobic Weak Base Drugs is Mediated via Their Intercalation into the Lysosomal Membrane.

Lipophilic weak base therapeutic agents, termed lysosomotropic drugs (LDs), undergo marked sequestration and concentration within lysosomes, hence altering lysosomal functions. This lysosomal drug entrapment has been described as luminal drug compartmentalization. Consistent with our recent finding that LDs inflict a pH-dependent membrane fluidization, we herein demonstrate that LDs undergo intercalation and concentration within lysosomal membranes. The latter was revealed experimentally and computationally by (a) confocal microscopy of fluorescent compounds and drugs within lysosomal membranes, and (b) molecular dynamics modeling of the pH-dependent membrane insertion and accumulation of an assortment of LDs, including anticancer drugs. Based on the multiple functions of the lysosome as a central nutrient sensory hub and a degradation center, we discuss the molecular mechanisms underlying the alteration of morphology and impairment of lysosomal functions as consequences of LDs’ intercalation into lysosomes. Our findings bear important implications for drug design, drug induced lysosomal damage, diseases and pertaining therapeutics.

Lysosomal Fusion: An Efficient Mechanism Increasing Their Sequestration Capacity for Weak Base Drugs without Apparent Lysosomal Biogenesis.

Lysosomal sequestration of anticancer therapeutics lowers their cytotoxic potential, reduces drug availability at target sites, and contributes to cancer resistance. Only recently has it been shown that lysosomal sequestration of weak base drugs induces lysosomal biogenesis mediated by activation of transcription factor EB (TFEB) which, in turn, enhances their accumulation capacity, thereby increasing resistance to these drugs. Here, we addressed the question of whether lysosomal biogenesis is the only mechanism that increases lysosomal sequestration capacity. We found that lysosomal sequestration of some tyrosine kinase inhibitors (TKIs), gefitinib (GF) and imatinib (IM), induced expansion of the lysosomal compartment. However, an expression analysis of lysosomal genes, including lysosome-associated membrane proteins 1, 2 (LAMP1, LAMP2), vacuolar ATPase subunit B2 (ATP6V1B2), acid phosphatase (ACP), and galactosidase beta (GLB) controlled by TFEB, did not reveal increased expression. Instead, we found that both studied TKIs, GF and IM, induced lysosomal fusion which was dependent on nicotinic acid adenine dinucleotide phosphate (NAADP) mediated Ca2+signaling. A theoretical analysis revealed that lysosomal fusion is sufficient to explain the enlargement of lysosomal sequestration capacity. In conclusion, we demonstrated that extracellular TKIs, GF and IM, induced NAADP/Ca2+ mediated lysosomal fusion, leading to enlargement of the lysosomal compartment with significantly increased sequestration capacity for these drugs without apparent lysosomal biogenesis.

Impact of mixed counter ion on saturation solubility of esylate salt of a weak basic drug to formulate physically stable and non-hemolytic ready to use injectable solution.

Current work investigates a typical issue in formulating a physically stable solution especially when more than one counter ions exist in the composition. The impact of different counter ions on solubilization of monohydrate esylate salt of a free base GSK-497,[BH+:C2H5SO3-:H2O] (1:1) (pKa value 8.0) was investigated to formulate ready to use small volume injectable solution. The concentration dependent aggregation was also appeared to be responsible for hemolytic nature of the drug, therefore a careful investigation was needed to select appropriate counter ion solution without compromising solubilization and leading into higher order aggregation. The esylate salt's native pH in water was closer to pHmax, thus it was risky to render the solution unbuffered. Generally, it is recommended to formulate at least two pH unit away from pHmax to prevent disproportionation related physical instability. This was achieved by buffering solution away from pHmax, using a lactate counter ion (other than esylate salt of API salt) that did not compromise solubility of the given phase and did not appear to promote higher order of aggregation. The rationale for selecting second counter ion was primarily based on the comparison of esylate salt's solubility product (Ksp), with the Ksp value generated from equilibrium solubility of the free base combined with several different counter ions (chloride, lactate, aspartate, citrate and tartrate) at equimolar molar ratio. This approach suggested that the use of a counter ion with higher Ksp (lactate and aspartate) value did not compromise the solubility of original esylate salt but a higher extent of aggregation was possible if aspartate is used to achieve higher solubility. In contrary, use of a counter ion with lower Ksp (citrate, tartrate, chloride) reduced the solubility hence did not favor higher order of aggregation. Thus, based on Ksp comparison a rationale of selecting second counter ion to buffer the salt solution is discussed in this work and optimal formulation concentration is determined based on drug aggregation threshold in solution.

The Lysosomal Sequestration of Tyrosine Kinase Inhibitors and Drug Resistance.

The Lysosomal sequestration of weak-base anticancer drugs is one putative mechanism for resistance to chemotherapy but it has never been directly proven. We addressed the question of whether the lysosomal sequestration of tyrosine kinase inhibitors (TKIs) itself contributes to the drug resistance in vitro. Our analysis indicates that lysosomal sequestration of an anticancer drug can significantly reduce the concentration at target sites, only when it simultaneously decreases its extracellular concentration due to equilibrium, since uncharged forms of weak-base drugs freely diffuse across cellular membranes. Even though the studied TKIs, including imatinib, nilotinib, and dasatinib, were extensively accumulated in the lysosomes of cancer cells, their sequestration was insufficient to substantially reduce the extracellular drug concentration. Lysosomal accumulation of TKIs also failed to affect the Bcr-Abl signaling. Cell pre-treatment with sunitinib significantly enhanced the lysosomal accumulation of the TKIs used; however, without apparent lysosomal biogenesis. Importantly, even increased lysosomal sequestration of TKIs neither decreased their extracellular concentrations nor affected the sensitivity of Bcr-Abl to TKIs. In conclusion, our results clearly show that the lysosomal sequestration of TKIs failed to change their concentrations at target sites, and thus, can hardly contribute to drug resistance in vitro.

Fabrication of Zero-Order Sustained-Release Floating Tablets via Fused Depositing Modeling 3D Printer.

A three-dimensional (3D) printer is a powerful tool that can be used to enhance personalized medicine. A fused deposition modeling (FDM) 3D printer can fabricate 3D objects with different internal structures that provides the opportunity to introduce one or more specific functionalities. In this study, zero-order sustained-release floating tablet was fabricated using FDM 3D printer. Filaments comprising poorly water-soluble weak base drug, itraconazole (ITZ) and polymers (hydroxypropyl cellulose and polyvinylpyrrolidone) were prepared, and tablets with a hollow structure and different outside shell thicknesses were fabricated. In the 3D printed tablets, ITZ existed as an amorphous state and its solubility improved markedly. As the outside shell thickness of the tablet increased, drug release was delayed and floating time was prolonged. In the tablets with 0.5 mm of the upper and bottom layer thickness and 1.5 mm of the side layer thickness, holes were not formed in the tablets during the dissolution test, and the tablets floated for a long period (540 min) and showed nearly zero-order drug release for 720 min. These findings may be useful for improving the bioavailability of several drugs by effective absorption from the upper small intestine, with floating gastric retention system.

A novel oil-based suspension of a micro-environmental, pH-modifying solid dispersion for parenteral delivery: Formulation and stability evaluation

The objective of this study was to evaluate a novel oil-based suspension as a potential parenteral drug delivery system for drugs with poor water solubility. Most of the new active pharmaceutical ingredients are weak acid or basic drugs with pH-dependent solubility. To limit this dependence, use of micro-environmental pH-modifying solid dispersions (micro pHm SD) has been proved to increase the bioavailability of these drugs. Toltrazuril (TOL), a weakly acidic drug with poor aqueous and pH-dependent solubility, was studied as a model drug. Recently, studies on TOL with focus on the parenteral injection are rarely to find in the literature. A novel parenteral oil-based TOL suspension was prepared containing TOL micro pHm SD (TSD) powders suspended in oil-based vehicles and the optimal formulation was screened. The stability of this formulation was assessed considering particle size distribution, settling volume ratio, redispersibility, thermal stability, and drug content. The optimized white oil-based TOL pHm SD suspension (W-TSDS) showed significant improved stability and shear-thinning behavior. In particular, fumed silica as suspending agent positively influenced the physical stability of the formulation. Furthermore, W-TSDS showed good injectability using 21 G needles and more rapid and sustained drug release compared to TSD powders in vitro. In the in vivo safety evaluation, W-TSDS showed good histocompatibility in rabbits injected subcutaneously or intramuscularly. We believe these findings provide an alternative choice of dosage form for the delivery of new active pharmaceutical ingredients.

Sodium bicarbonate nanoparticles modulate the tumor pH and enhance the cellular uptake of doxorubicin

Acidic pH in the tumor microenvironment is associated with cancer metabolism and creates a physiological barrier that prevents from drugs to penetrate cells. Specifically, ionizable weak-base drugs, such as doxorubicin, freely permeate membranes in their uncharged form, however, in the acidic tumor microenvironment these drugs become charged and their cellular permeability is retarded. In this study, 100-nm liposomes loaded with sodium bicarbonate were used as adjuvants to elevate the tumor pH. Combined treatment of triple-negative breast cancer cells (4T1) with doxorubicin and sodium-bicarbonate enhanced drug uptake and increased its anti-cancer activity. In vivo, mice bearing orthotropic 4T1 breast cancer tumors were administered either liposomal or free bicarbonate intravenously. 3.7 ± 0.3% of the injected liposomal dose was detected in the tumor after twenty-four hours, compared to 0.17% ± 0.04% in the group injected free non-liposomal bicarbonate, a 21-fold increase. Analyzing nanoparticle biodistribution within the tumor tissue revealed that 93% of the PEGylated liposomes accumulated in the extracellular matrix, while 7% were detected intracellularly. Mice administered bicarbonate-loaded liposomes reached an intra-tumor pH value of 7.38 ± 0.04. Treating tumors with liposomal bicarbonate combined with a sub-therapeutic dose of doxorubicin achieved an improved therapeutic outcome, compared to mice treated with doxorubicin or bicarbonate alone. Interestingly, analysis of the tumor microenvironment demonstrated an increase in immune cell’ population (T-cell, B-cell and macrophages) in tumors treated with liposomal bicarbonate. This study demonstrates that targeting metabolic adjuvants with nanoparticles to the tumor microenvironment can enhance anticancer drug activity and improve treatment.

Predicting the Changes in Oral Absorption of Weak Base Drugs Under Elevated Gastric pH Using an In Vitro–In Silico–In Vivo Approach: Case Examples—Dipyridamole, Prasugrel, and Nelfinavir

The aim of the current research was to develop an in silico oral absorption model coupled with an in vitro dissolution/precipitation testing to predict gastric pH-dependent drug-drug interactions for weakly basic drugs. The effects of elevated gastric pH on the plasma profiles of dipyridamole, prasugrel, and nelfinavir were simulated and compared with pharmacokinetic data reported in humans with or without use of proton pump inhibitors or histamine H2 receptor antagonists.The in vitro dissolution and precipitation data for the weakly basic drugs in biorelevant media were obtained using paddle apparatus. An in silico prediction model based on the STELLA software was designed and simulations were conducted to predict the oral pharmacokinetic profiles of the 3 drugs under both usual (low) and elevated gastric pH conditions.The changes in oral absorption of dipyridamole and prasugrel in subjects with elevated gastric pH compared with those with low stomach pH were predicted well using the in vitro–in silico–in vivo approach. The proposed approach could become a powerful tool in the formulation development of poorly soluble weak base drugs.

Effect of pH on weakly acidic and basic model drugs and determination of their ex vivo transdermal permeation routes

ABSTRACT The aim of the present study was to investigate the effect of donor pH on the transdermal permeability of the model drugs across rat skin and also to determine the major route of transport of the drugs. Weakly acidic drugs (partition coefficient) ibuprofen (3.6), aceclofenac (3.9), glipizide (1.9) and weakly basic drugs olanzapine (3.6), telmisartan (6.0), and sildenafil citrate (1.9) were selected for the study. The ex vivo permeation studies of these drugs at different donor pH (pH - 1.2, 4, 5, 6.8, 7.4, and 8) using Franz diffusion cell (area, 7.54 cm2) has shown a pH-dependent permeability. Among these drugs the weakly acidic drugs has shown higher permeation rates compared to the weakly basic drugs. The permeability coefficient and the distribution coefficient of the weakly basic drugs increased on increasing the pH whereas the weakly acidic drugs showed an inverse relation. The weakly basic drugs also showed an increase in permeation with increase in the fraction of unionized species indicating dominance of transcellular route of permeation. With an exception of sildenafil citrate, a weakly basic salt form of the drug which showed a high permeation value at pH 7.4 where 57% of the drug was unionized, indicating the involvement of both paracellular and transcellular route in its permeation.