Dewaxing is an intermediate step in investment casting which can determine the properties of final metallic product and is strongly dependent on the properties of pattern wax. Processing of pattern wax composites with the conventionally available heating processes is energy intensive and requires high processing time, thus resulting in the lower processing rate at larger scale. Use of microwave technology for the dewaxing study is highly attractive alternative owing to the advantage of energy-efficient processing. The processing time of pattern wax composite of paraffin wax, bitumen, polyethylene and EVA in microwaves oven as a function of susceptor has been investigated. Carbon black was used as microwave susceptor in wax composites at several weight percentages. The efficient processing and melting behavior of pattern wax composite utilizing microwave dewaxing, thanks to the creation of heat sensitive sites within the pattern wax composite by the susceptor material, were analyzed in this study. FTIR-ATR, rheometer, TGA, DSC, UTM, SEM and OM were used to study the behavior of the wax composite. With the increase in the susceptor (CB) loading from 0.15 to 0.75%, an increase in the thermal stability of 6.86% was observed as depicted by the increase in the on-set temperature of the specimens. 71.9% decrease in the melt flow time of pattern wax composite was observed with the incorporation of 1.5% of CB as compared to reference specimen which manifested an inverse relationship between susceptor loading and processing time in the presence of microwave.