Wavelength Division Research Articles

Magnetic field measurement with temperature compensation based on a fiber ring microwave photonic filter and Vernier effect.

We proposed, a novel, to the best of our knowledge, magnetic field measurement with temperature compensation based on a fiber ring microwave photonic filter (FR-MPF) and a Vernier effect. The sensing head is made up by attaching the fiber Bragg grating (FBG) on the magnetostrictive material. Based on the wavelength division multiplexing, two FR-MPFs with different optical carriers can eliminate the influence of the temperature. The Linear chirped FBG (LCFBG) in the FR can transfer the magnetic field variation to the time delay change as well as the frequency shift. Two FR-MPFs with close free spectral ranges can implement the Vernier effect, which can improve the sensitivity. The experimental results show the sensitivity is 58.3 kHz/Oe and the magnification factor is 214. The proposed sensor has merits of high resolution, high sensitivity and low cross-sensitivity, which has potential applications requiring high precision detections.

Programmable multi-wavelength distributed feedback laser array integrated in a liquid crystal polymer waveguide.

Liquid crystal (LC) distributed feedback (DFB) lasers hold significant potential for integrated photonics applications. However, limitations in wavelength spacing for wavelength switching, device size, and compatibility with other technologies have impeded advancements of the LC DFB laser in integration and responsiveness. Herein, we propose a thin-film multi-wavelength DFB laser array utilizing high-resolution patterned programmable nematic LC polymers, enabling rapid switching with high-resolution wavelength spacing between wavelength division multiplexing channels while maintaining a stable single longitudinal mode (SLM) for each laser. The underlying physical mechanism involves modulating the effective refractive index of the DFB laser by varying the LC molecules' orientation angles between adjacent regions of the LC grating to achieve wavelength modulation. Additionally, a specialized LC waveguide design connects the DFB lasers, facilitating wavelength modulation as well as straight-line and bending propagation of the laser. Furthermore, the laser array demonstrates a relatively low energy threshold, facilitating its applications in high-integration scenarios.

Observation of multifunctional robust topological states based on asymmetric C4 photonic crystals

Recent advancements in high-order topological insulators have heralded new opportunities for the innovation and utilization of optical devices. This paper presents a composite asymmetric C4 photonic crystal to achieve multifunctional, robust topological states. Through detailed analysis of the fine changes in the topological bandgap induced by distortion parameters, we facilitate the realization of topological edge states in wavelength division multiplexing applications. We utilize both trivial and nontrivial properties of the topological bandgap to precisely manipulate zero-dimensional angular states, one-dimensional topological boundary states, and two-dimensional body states. Through simulations and experimental results, our advanced asymmetric C4 photonic crystal structure demonstrates superior robustness for the transmission of topological edge states. Our research paves the way for the deployment of more robust topological boundary state transmission systems and advances the application potential of higher-order topological states.

The KM3NeT Broadcast optical system network

The optical data transport system of the KM3NeT neutrino telescope at the bottom of the Mediterranean Sea will serve more than 6000 optical modules in the detector arrays with a point-to-point optical connection to the control stations onshore. The ARCA and ORCA detectors of KM3NeT are being installed at a depth of about 3500 m and 2500 m, respectively and their distance to the control stations is about 100 km and 40 km. The two detectors are optimised for the detection of cosmic neutrinos with energies above about 1 TeV (ARCA) and of atmospheric neutrinos with energies in the range 1 GeV– 1 TeV (ORCA). The expected maximum data rate is 200 Mbps per optical module. The implemented optical data transport system matches the layouts of the networks of electro-optical cables and junction boxes in the deep sea. For efficient use of the fibres in the system the technology of Dense Wavelength Division Multiplexing is applied. To comply with the scientific goals of KM3NeT, a time calibration of 1 ns between the many optical modules in the detector arrays is essential for the reconstruction of the neutrino events. For the first time in a deep sea neutrino telescope the White Rabbit protocol over Ethernet is used for the clock distribution. Downstream slow control and base module signals are broadcasted to all optical modules in the detector array. Synchronisation is achieved by communication between a White Rabbit master onshore and a White Rabbit slave unit inside the optical modules. In this contribution the KM3NeT broadcast optical data transport system is presented.

Isolator-free quantum dot comb lasers with optical feedback enhanced DWDM transmission

Feedback-insensitive Quantum Dot (QD) comb lasers hold significant promise for integrated dense wavelength division multiplexing photonic systems due to their ability to generate multiple wavelengths and operate without bulky isolators, facilitating the development of high-density and large-scale photonic integrated circuits. In this study, we investigated the optical feedback (OFB) influence of the InAs/GaAs QD comb laser from various perspectives. Our findings reveal that the comb laser exhibits a stable locking region with consistent optical spectra across a range of OFB strengths (−45 to −10 dB). Furthermore, under a high OFB strength of −10 dB, there is a notable 40 dB suppression of relative intensity noise in the low-frequency range (below 1 GHz). Transmission experiments demonstrate clear eye openings at 25 Gbps using a bit pattern of 231-1 pseudorandom binary sequence. Remarkably, the bit error rates decrease by five orders of magnitude under −10 dB OFB. These results indicate the ultra-robustness of 100 GHz grid QD comb laser, which exhibits great transmission enhancement under a strong OFB of −10 dB.

56 Gbps externally modulated widely tunable lasers with SOA boosters heterogeneously integrated on silicon

We demonstrate externally modulated widely tunable lasers co-integrated with semiconductor optical amplifiers (SOAs) heterogeneously integrated on silicon. The widely tunable laser enables continuous single-mode operation over a tuning range of approximately 40 nm, with a side-mode suppression ratio (SMSR) of at least 50 dB and an average waveguide-coupled optical power of 5 mW. The integrated electro-absorption modulator (EAM) exhibits an extinction ratio (ER) of 16 dB when reversed biased at -2 V. The bit-error-rate (BER) measurements conducted across the available optical bandwidth (15 nm) showcase error-free transmission at 32 Gbps using non-return-to-zero (NRZ) signals for the majority of wavelengths in a back-to-back (B2B) configuration. Additionally, transmission measurements over distances of up to 10 km through a standard single-mode fiber (SSMF) have been successfully demonstrated. Dynamic extinction ratio (DER) values exceeding 4.5 dB are achieved for all wavelengths. Open-eye diagrams were measured up to 56 Gbps. These results demonstrate that this compact mono-epitaxial externally modulated tunable laser with integrated optical amplification can be a cost-effective transmitter solution for dense wavelength division multiplexing (DWDM) metropolitan and access networks.

Performance analysis of a 400-Gbps DWDM-FSO system using advanced modulation formats and under adverse weather conditions

Free space optical (FSO) systems offer an attractive and cost-effective solution for providing communication services in remote regions, as they allow secure transmission without the need for licensing and with lower deployment costs. However, the performance of FSO systems can be significantly impacted by atmospheric turbulences, creating considerable challenges to their deployment. To meet the expanding bandwidth requirements in optical networks, dense wavelength division multiplexing (DWDM) has emerged as a viable option. The development of a 400-Gbps DWDM-FSO system with advanced modulation formats is the subject of this paper. To ensure efficient energy conservation in such a system, power consumption needs to be minimized while maintaining performance level; this calls for optimization of different components within the system. The system is made up of 10 channels and each channel can transmit data at 40 Gbps. Various modulation schemes like carrier-suppressed return-to-zero, modified duo binary return-to-zero, differential phase shift keying, and duo binary return-to-zero are studied for their impact on system performance parameters Q-factor and bit error rate (BER) in C-band around 1550 nm wavelengths. The assessment is also extended to the effects that changing FSO length, input power, and data rate have on these two parameters as well as an evaluation regarding how differing atmospheric conditions influence the FSO system’s effectiveness.

All-fiber miniature non-contact photoacoustic probe based on photoacoustic remote sensing microscopy for vascular imaging in vivo.

Photoacoustic (PA) remote sensing (PARS) microscopy represents a significant advancement by eliminating the need for traditional acoustic coupling media in PA microscopy (PAM), thereby broadening its potential applications. However, current PARS microscopy setups predominantly rely on free-space optical components, which can be cumbersome to implement and limit the scope of imaging applications. In this study, we develop an all-fiber miniature non-contact PA probe based on PARS microscopy, utilizing a 532-nm excitation wavelength, and showcase its effectiveness in in vivo vascular imaging. Our approach integrates various fiber-optic components, including a wavelength division multiplexer, a mode field adaptor, a fiber lens, and an optical circulator, to streamline the implementation of the PARS microscopy system. Additionally, we have successfully developed a miniature PA probe with a diameter of 4 mm. The efficacy of our imaging setup is demonstrated through in vivo imaging of mouse brain vessels. By introducing this all-fiber miniature PA probe, our work may open up new opportunities for non-contact PAM applications.

Routing and assignment of wavelengths for bicube in linear array WDM optical networks

Optical networks leverage the principles of optical communication to transmit data over long distances with high bandwidth and low signal loss. They have lots of applications supporting the backbone of modern communication systems. Wavelength division multiplexing (WDM) enables the simultaneous transmission of many signals with distinct wavelengths via one optical fiber, thereby increasing the overall capacity of the network. One of the significant aspects of designing and managing WDM optical networks involves routing and wavelength assignment (RWA), especially as the demand for high-capacity, low-latency communication continues to grow in recent times. Bicube networks possess many attractive properties, one of the salient features being low diameter as compared to a hypercube. Hence, research using bicube topology is very much prevalent in the last few years. In this paper, we use the technique of congestion to study the RWA problem for bicube in a linear array optical network that uses WDM technology. We also propose algorithms to efficiently compute the minimum number of wavelengths.

Wavelength-division multiplexing (WDM) FSO communications with soliton microcombs

This study highlights the benefits of soliton microcombs (SMCs) in FSO communication systems. By employing a microring resonator coupled with an add/drop filter, we achieved soliton microcombs with a precise Free Spectral Range (FSR) of 1870 pm and a Full Width at Half Maximum (FWHM) of 60 pm, tailored for Wavelength Division Multiplexing (WDM) channels. The system utilized 100 lines for the WDM channel with an inter-channel spacing of 0.5 nm and PolSK modulation to encode the data. This combination achieved a bit error rate (BER) of 10 − 9 , significantly lower than the 10 − 7 observed with traditional systems. For performance simulation, the channel was characterized using the gamma-gamma model, which assessed the impact of atmospheric turbulence on data transmission. The results show a high channel capacity ( 10 3 Gbit/s) and a low loss probability ( 10 − 8 ), ensuring reliable data transmission even in the presence of atmospheric disturbances. This methodology provides substantial improvements in stability and efficiency for FSO networks.

Energy evaluation for a dynamic and reconfigurable TWDM‐PON on a novel network traffic adaptable pattern

SummaryEven with existing methodologies, dynamic resource allocation, service inconsistency, operational costs, and excess energy/power consumption in optical access networks remain the key challenges for the next‐generation passive optical network (NG‐PON) design and development. This paper introduces a novel method for analyzing energy/power consumption in time and wavelength division multiplexed (TWDM) passive optical networks (PONs) with a ring‐based topology. We propose subscriber‐based channel allocation models (CAMs) for on‐demand services, allocate bandwidth dynamically, and evaluate their downstream power consumption. To determine the necessary optical devices for the various CAMs, we investigate subscriber take‐up rates by optimizing the utilization of optical components based on active subscribers. Implementing a novel Poisson distribution‐based network traffic model addresses energy‐related concerns and explores optimization techniques to minimize power and improve energy efficiency. With a take‐up rate of 64 active subscribers, simulation results show significant power consumption reductions ranging from 62.2 to 67.7%, achieved by the proposed subscriber‐based architecture models with varying subscriber counts, when compared with the conventional model. The model with the most subscribers (2048 subscribers) saves the most energy by reducing power consumption to 292 W from the conventional model's (2048 subscribers) 440 W. Furthermore, the model with the most subscribers saves 33.4% of energy, outperforming other subscriber‐based architecture models without affecting QoS even during peak hours of the day. These numerical results show that TWDM‐PONs with the most subscribers exhibit improved energy efficiency than the conventional and other proposed subscriber‐based architecture models.

Real-time demonstration of 64 × 200 Gbps UDWDM-PON downstream transmission based on silicon photonic integrated transceiver

Coherent detection, high-order modulation, and dense wavelength division multiplexing (DWDM) technologies provide solutions for increasing bandwidth demand of future access networks. We experimentally demonstrate a real-time 64 × 200-Gb/s coherent ultra-dense wavelength-division (UDWDM) coherent passive optical networks (PONs) at 75-GHz channel spacing. The demonstrated downlink transmission is realized with the dual-polarization QPSK (DP-QPSK) modulation scheme. The cost is reduced by using silicon photonic integrated coherent transceiver modules and wider grid AWGs. The power budget is evaluated when all 200 channels are launched at C band. The power budget is 26 dB after 20-km G.652D standard single mode fiber (SSMF) transmission without amplifier at the receiver side under soft-decision FEC (SD-FEC) threshold of 1 × 10−2, and can achieve 32.5 dB with pre-amplified semiconductor optical amplifier (SOA) used at the receiver side.

W-band photonic-aided reconfigurable multichannel vector mm-wave transmission enabled by the digital subcarrier multiplexing technique.

As multimedia service demands rise, radio-over-fiber (RoF) systems necessitate a flexible wireless resource allocation in multi-user scenarios. Optical wavelength division multiplexing (WDM) can meet multi-user application scenarios but has the problems of high hardware cost and complexity. In this Letter, we propose a photonic-aided reconfigurable multichannel vector millimeter-wave (mm-wave) transmission scheme in the RoF system enabled by the digital subcarrier multiplexing (DSCM) technique. The scheme can flexibly adjust the number and frequency spacing of subcarriers as well as the bandwidth and modulation format allocated to each subcarrier, and it can be applied to multi-user scenarios without increasing the cost and complexity of hardware implementation. The off-line experiments verify the system transmission performance with different numbers, bandwidth, and frequency spacing of subcarriers, fully verifying the feasibility of the scheme. Furthermore, the Letter delves into the effects of the subcarrier number, bandwidth, and frequency spacing on overall system performance, highlighting the potential of this scheme for flexible and cost-effective wireless resource allocation in RoF systems.

Second-Order Microring Filter with Large Free-Spectral-Range and Wavelength-Tunable-Range over 50 nm

The high-order microring filter has been proposed for a larger free spectral range (FSR) compared with the single microring filter; therefore, it has great potential to be used in wavelength division multiplexing (WDM) systems. In this article, we have designed and fabricated a second-order microring filter made up of two rings connected in series with two Ti thermal heaters deposited above them. The large FSR of 56.8 nm is obtained by decreasing the difference of the radii between the two series rings, achieving similar FSRs to that of higher-order filters but with a simpler and more compact design. The average electrical tuning efficiencies of the two heaters are 0.186 nm/mW and 0.207 nm/mW, and the center wavelength of the filter can be tuned over the entire FSR with an applied electrical power of less than 40 mW.

Full-duplex dynamic TDMA scheme and clock synchronization and compensation method for the multi-user UWOC system.

In this Letter, we propose a full-duplex dynamic time division multiple access (FDD-TDMA) scheme for multi-user underwater wireless optical communication (UWOC). It supports full-duplex communication through wavelength division duplex (WDD) and enhances the system throughput using dynamic time resource allocation. Additionally, a clock synchronization and compensation method is proposed for precise clock synchronization without time-keeping. With the proposed FDD-TDMA scheme and the clock synchronization and compensation method, we establish a two-user UWOC system based on on-off keying (OOK) modulation. Experiments are conducted in a 10 m water pool environment. The experimental results show that the designed system can achieve a data rate of 25 Mbps without error codes and 40 Mbps with a bit error rate (BER) below the forward error correction (FEC) limit. The FDD-TDMA scheme notably improves the system throughput when communication demands among users are variable compared to the conventional time division multiple access (TDMA). Moreover, a reduction in phase deviations from microseconds to ten nanoseconds is achieved by the clock synchronization and compensation method.

All-fiber spatial and wavelength gain-flattening of few-mode EDFA via mode selective coupler

The mode division multiplexing (MDM) technique together with wavelength division multiplexing (WDM) shows the great prospect to solve the capacity crunch of current standard single mode fiber (SSMF) transmission system. However, the modal and wavelength gain fluctuation fundamentally limit both the capacity and the reach of hybrid MDM-WDM transmission system. Here, we propose an all-fiber few-mode gain-flattening filter (FM-GFF) based on mode selective coupler (MSC), to effectively mitigate the gain fluctuation of few-mode erbium doped fiber amplifier (FM-EDFA) in both spatial and wavelength dimensions. With the help of genetic algorithm (GA), variable mode dependent loss spectra of cascaded MSCs can be efficiently obtained, according to the gain profile of the used FM-EDFA. Consequently, gain-flattening among all guided linearly polarized (LP) mode groups over the C-band can be realized. Simulation results reveal that, as for the spatial and wavelength gain flattening among 4/6-LP mode groups, only 5/7 cascaded MSCs are good enough to mitigate the modal and wavelength gain fluctuation from 9.89 dB and 11.79-dB to less than 0.38 dB and 0.46 dB over the C-band. Finally, we carry out experimental verification based on 2-LP mode groups gain flattening over C-band. When 3 cascaded MSCs are involved, the gain fluctuation of FM-EDFA over the C-band can be flattened from 2.46 dB to less than 0.96 dB.

MODELLING OF A TBPS SYSTEM FOR 5G WIRELESS COMMUNICATION UTILIZING DWDM RFoF

In recent times, several sectors and businesses have been doing extensive research on the usage of Dense Wavelength Division Multiplexing (DWDM) and Radio Frequency Over Fiber (RFOF). These two technologies are considered to be the most significant features. Increasing the data rate was a significant challenge that needed to be addressed, and the goal was to successfully implement a fiber optic system that was dependable and had a high number of associated channels. As a consequence of this, a 64-channel DWDM RFOF system that is capable of supporting a larger number of data rates of 2.56 Tbps has been designed and implemented in this study. A significant number of channels that have been sampled will be chosen for inquiry based on the characteristics of Quality Factor (QF) and Bit Error Rate (BER) that have been researched. This study will be carried out with the assistance of Optisystem software. These findings would be investigated at distances ranging from sixty to one hundred eighty kilometers, with the NRZ modulation format being used and a lunched power of zero decibels per meter. Additionally, the purpose of this study would be to explore the three distinct techniques of compensation, namely pre, post, and symmetrical, to quantify the individual performance of each approach on the suggested system. According to the findings, the use of symmetrical-based compensation yielded the most favorable outcomes, with the average QF produced falling within the range of (20.33-14.09) dBm over distances ranging from (60-180) kilometers. This demonstrates the dependability of the proposed system.

Tbps wide-field parallel optical wireless communications based on a metasurface beam splitter

Optical wireless communication (OWC) stands out as one of the most promising technologies in the sixth-generation (6G) mobile networks. The establishment of high-quality optical links between transmitters and receivers plays a crucial role in OWC performances. Here, by a compact beam splitter composed of a metasurface and a fiber array, we proposed a wide-angle (~120°) OWC optical link scheme that can parallelly support up to 144 communication users. Utilizing high-speed optical module sources and wavelength division multiplexing technique, we demonstrated each user can achieve a communication speed of 200 Gbps which enables the entire system to support ultra-high communication capacity exceeding 28 Tbps. Furthermore, utilizing the metasurface polarization multiplexing, we implemented a full range wide-angle OWC without blind area nor crosstalk among users. Our OWC scheme simultaneously possesses the advantages of high-speed, wide communication area and multi-user parallel communications, paving the way for revolutionary high-performance OWC in the future.

The theoretical study of high-order dissipation soliton molecules evolution in a passively mode-locked fiber laser

High-order solitons represent a special form of soliton. Due to the complexity of their spatial structure and dynamic evolution, they have important applications in communication systems such as wavelength division multiplexing and secure communication. However, compared to traditional solitons, research on the spectral evolution of high-order solitons is still insufficient. In this paper, through precise control of laser parameters, the dynamic evolution process from stable dissipative single soliton to complex dissipative 8-order soliton molecules in passively mode-locked fiber lasers was successfully simulated. This demonstrates the complexity of solitons interaction and reveals the regularity of soliton molecules order with variations in four parameters: the small signal gain coefficient, nonlinear coefficient, gain bandwidth and the polarization controller angle. Through deep analysis of the order of soliton molecules, pulse shape and spectral shape of dissipative soliton molecules, we showcase the potential of fine-tuning laser parameters to achieve high-order dissipative soliton molecules. This work provides important references for the optimization design and expanded applications of lasers, further driving the development of high-performance, high-efficiency fiber laser technology.

Design and simulation of an enhanced optical demultiplexer using photonic crystal resonators

The purpose of this paper is to examine the design, simulation, and optimization of a demultiplexer optical system using photonic crystal resonators. Utilizing the distinct properties of photonic crystals, the proposed device achieves high-quality resonances, efficient wavelength separation, and minimal crosstalk. These characteristics are crucial for enhancing the performance of dense wavelength division multiplexing (DWDM) systems, which require precise and efficient channel separation to manage increasing data traffic. Extensive simulations conducted with the RSoft CAD tool explore the impact of varying resonator parameters such as refractive index, geometric dimensions, and material composition on the device's performance. The results indicate substantial improvements in transmission efficiency and quality factor, with average values of 98.675% and 3131.125, respectively. Furthermore, the ability to fine-tune these parameters allows for the customization of the demultiplexer to specific wavelength ranges, making it highly adaptable for various telecommunications applications. This research aims to propel the development of compact, high-performance photonic devices that meet the growing demands of modern communication networks, ultimately contributing to more efficient and reliable optical communication systems.