Wavelength Division Multiplexing Research Articles

All-polarization-maintaining dual-comb fiber laser with mechanically shared cavity configuration and micro-optic component

An all-polarization-maintaining dual-comb fiber laser with a mechanical shared-cavity configuration was demonstrated. The laser cavity configuration was simplified and downsized using the micro-optic component of a saturable absorber mirror and a wavelength-division multiplexer. A high relative frequency stability was achieved with an Allan deviation of 0.02 Hz. Further, the all-polarization-maintained fiber-based configuration facilitated an integrated phase noise of the relative beat note between dual-frequency combs of 378 rad (10 Hz−1 kHz) and 9.0 rad (100 Hz−1 MHz). The simple, compact, and robust dual-comb fiber laser yielded highly mutually coherent dual-optical frequency combs without active servo control, and significantly simplified dual-comb spectroscopy.

Next-Generation OBS Architecture Transforms 5G Networks Powered by Machine Learning, Probabilistic Modeling and Algorithm Optimisation

Next-generation 5G networks require a high-speed, low-latency, and robust communication backbone to support new applications such as IoT, cloud computing, and virtual reality. Optical burst switching (OBS) is a promising method for 5G networks due to its ability to handle high-speed data transit and excellent bandwidth utilisation. Traditional OBS networks, on the other hand, have a high blocking probability, low resource utilisation, and limited scalability. To address these challenges, this work provides a unique OBS design that integrates machine learning, probabilistic modelling, and efficient algorithms. The usage of machine learning-based burst assembly algorithms, which dynamically predict the best resource allocation for each burst based on network conditions and QoS requirements, is a key component of the proposed architecture. A complete simulation analysis is performed using a typical Wavelength Division Multiplexing (WDM) traffic dataset to evaluate the performance of the proposed architecture. The simulation results show that, as compared to standard OBS networks, the suggested architecture reduces the likelihood of obstruction and improves resource utilisation significantly. Furthermore, when compared to previous OBS systems, the suggested design is more efficient at managing dynamic traffic and enables greater scalability. The simulation study's performance tests demonstrate that the suggested architecture has a blocking probability of less than 10-6, a throughput of more than 95%, and a latency of less than 4 milliseconds. These findings show that the suggested OBS design for next-generation 5G networks is both feasible and effective.

Integrated long reach and energy-efficient NGPON-VLC system with OCDM/WDM for smart green buildings

Smart green buildings (SGBs) are composed of numerous services and offer hopeful solutions to the world's continuous and rapid urbanization. Conventional data transmission systems are insufficient to deliver acceptable services because to the sudden surge in high-quality information transmission requirements over long distance for numerous linked residents in SGBs. Consequently, a hybrid next generation passive optical network (NGPON) along with visible light communication (VLC) indoor/outdoor broadcast network is presented in this work to increase the reliability with intelligence, exalted overall efficiency, cost efficiency, and security of SGBs. Bidirectional PON-VLC system incorporates the time and wavelength division multiplexing (TWDM), wavelength division multiplexing (WDM) and optical code division multiplexing (OCDM) techniques. In order to improve system performance, various OCDM codes are used in this work at 10/2.5 Gbps per channel throughput via fiber-VLC channels. According to the simulation results, the modified new zero cross-correlation (MNZCC) code performs better than previous codes and supports 200 active residents at reliable 100 km fiber along with 5 m VLC range. Furthermore, by expanding the received aperture diameter to 25 cm, VLC coverage may be increased till 10 m. Moreover, it provides adequate receiver sensitivities of − 13 to − 12 dB in uplink with − 9.8 to − 6 dBm in downlink for 200 to 600 fields of view angles compared to 00 view angle having sensitivity of − 15 dBm. Additionally, the numerical analysis and comparison performance show that PON-VLC outperforms fiber-VLC link-based scenarios when it comes to noise and channel impairments.

116.66-Tb/s WDM transmission over 16 Km field deployed 7-core fiber based on sub-constellations overlap constellation shaping.

Constellation shaping (CS) has always been a popular research hotspot in optical communication. Recently, most researchers have focussed on using constellation-shaping technology to improve the system's performance, ignoring the additional penalty it brings to the coherent system. This paper proposes a method of constellation truncation using sub-constellation overlap to perform CS on quadrature amplitude modulation (QAM). The experimental results show that compared with the traditional probabilistic shaping 16QAM, the proposed scheme can effectively avoid the extra penalty brought by CS and achieve a gain from 0.5 to 1.5 dB in optical signal-to-noise ratio. To practically verify the proposed scheme's performance, 7-core 16 km fiber span is deployed in the field to experimentally perform space division multiplexed coherent transmission. The wavelength division multiplexing (WDM) of 93 carriers was used to achieve coherent transmission at a net rate of 116.66-Tb/s.

4*10 Gbps WDM communication system based on a tunable V-cavity semiconductor laser.

This paper is about the V-cavity tunable semiconductor laser with a 1550 nm band used as a transmitter to build a wavelength division multiplexing (WDM) optical fiber communication link. In the experiment, a 20 km optical fiber communication link with a reasonable eye diagram and low bit error rate (BER) transmitted by 40 Gbps can be established. The experimental results show that a single laser can achieve a wavelength tuning range of 25 nm, reach 32 channels at a 100 GHz frequency interval, and the average side mode suppression ratio (SMSR) is above 39 dB. The advantages and application potential of V-cavity tunable semiconductor laser (VCL) for wavelength routing in optical communication networking are verified by experiments.

Integrated Bragg grating filters based on silicon-Sb2Se3 with non-volatile bandgap engineering capability.

Integrated optical filters show outstanding capability in integrated reconfigurable photonic applications, including wavelength division multiplexing (WDM), programmable photonic processors, and on-chip quantum photonic networks. Present schemes for reconfigurable filters either have a large footprint or suffer from high static power consumption, hindering the development of reconfigurable photonic integrated systems. Here, a reconfigurable hybrid Bragg grating filter is elaborately designed through a precise, modified coupling mode theory. It is also experimentally presented by integrating non-volatile phase change material (PCM) Sb2Se3 on silicon to realize compact, low-loss, and broadband engineering operations. The fabricated filter holds a compact footprint of 0.5 µm × 43.5 µm and maintains a low insertion loss of < 0.5 dB after multiple levels of engineering to achieve crystallization. The filter is able to switch from a low-loss transmission state to the Bragg reflection state, making it a favorable solution for large-scale reconfigurable photonic circuits. With a switching extinction ratio over 30 dB at 1504.85 nm, this hybrid filter breaks the tradeoff between insertion loss and tuning range. These results reveal its potential as a new candidate for a basic element in large-scale non-volatile reconfigurable systems.

Design of terahertz plasmonic wavelength division multiplexer assisted by whispering gallery mode resonators

Design of terahertz plasmonic wavelength division multiplexer assisted by whispering gallery mode resonators

Analysis of atmospheric attenuation of a FSO–WDM system for long-range communication

Abstract An FSO system can provide a solution to the problem of last-mile connectivity while also offering a high degree of security and a large capacity for high-speed information transmission, making it a versatile and powerful option for data communication. Despite the above-mentioned advantages, some factors have to be considered when establishing long-range communication, one such factor is atmospheric turbulence (haze, light fog, moderate fog) which degrades the ideal characteristics of the FSO channel and causes a loss in the signal’s power. This loss of power during transmission can be improved by using suitable amplifiers (hybrid optical amplifier, semiconductor optical amplifier) to provide better performance. The next-generation networks must be capable of supporting a significant amount of backhaul data traffic, accommodating a larger number of users, and increasing channel capacity to meet the demands of modern data communication. By implementing wavelength division multiplexing (WDM) and free space optical (FSO) communication techniques, the capacity of the channel can be increased, and more users can be accommodated. The maximum link length offered by the FSO–WDM system has been investigated with hybrid optical amplifier considering the minimum bit error rate, which can provide reliable and long-distance communication.

Trench-assisted multi-ring-core fiber for orbital angular momentum modes

Orbital angular momentum (OAM) multiplexing technology has attracted significant interest due to its ability to increase the data transmission capacity in optical communications. By combining OAM-based mode division multiplexing (MDM) and wavelength division multiplexing (WDM) techniques in multi-core fiber (MCF), the transmission rate and spectral efficiency of the optical communication systems can be greatly enhanced. In this paper, we present a design of a multi-ring air-core trench-assisted fiber that supports transmission over the entire C + L (1530–1625 nm) band with low inter-ring crosstalk. The high-contrast ring and trench design can effectively suppress the inter-modal crosstalk. The effects of the ring spacing, wavelength range and doping concentration on the crosstalk suppression are also systematically investigated. Furthermore, the complexity of the MIMO processing system is greatly reduced with a fewer-optical-core structure while keeping low inter-ring crosstalk. The results demonstrate that our designed fiber can support 140 OAM modes at 1550 nm with < −79.4 dB inter-ring crosstalk at low Ge-doped concentration (12.5 mol%), and it can keep the inter-ring crosstalk below −66.56 dB across the C + L band, which features lower inter-ring crosstalk than the other reports while supporting more OAM modes. Furthermore, to support more OAM modes with lower inter-ring crosstalk and intra-modal crosstalk, we further provide a second low-doping-concentration (12.5 mol%) fiber design, which can support 196 OAM modes with < −35.74 dB inter-ring crosstalk and Δneff > 5.39 × 10−4. Additionally, our designed fiber can support 224 OAM modes (37.5 mol% Ge-doped) and < −63 dB inter-ring crosstalk with low intra-modal crosstalk (Δneff > 5.45 × 10−4) and flat dispersion distribution (chromatic dispersion slope lower than 0.171 ps/nm2/km) across the C + L band.

Effect of Gain Saturation on Wideband WDM Signal in PPLN-Based Optical Parametric Amplifier

The periodically poled LiNbO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> (PPLN) based optical parametric amplifier (OPA) is a technology that contributes to the construction of multi-band wavelength-division multiplexing (WDM) optical networks thanks to its wide amplification bandwidth and wavelength conversion function. In addition, the fast response of the OPA means it is unaffected by sudden changes of wavelength channels due to dynamic channel add-drop. However, such fast response leads to nonlinear signal distortion when operating in the gain saturation region. This paper experimentally investigates the conversion of gain saturation into the nonlinear amplitude distortion in a 64-Gbaud 64QAM WDM signal. We characterized the input power tolerance of a PPLN-based OPA in wideband WDM applications and found that the nonlinear amplitude distortion can be suppressed by increasing the number of WDM channels. For a 75-GHz-spacing 64-channel WDM configuration, the total input power tolerance was improved by ∼10 dB compared to a single-channel case. We also confirmed that there is almost no wavelength dependence of the effect of gain saturation on the signal distortion. These results show that PPLN-based OPAs have a wide total input power range for amplifying wideband WDM signals in terms of the nonlinear distortion.

Performance improvements of a VLC system, in a V2X context, using a different multiplexing technique

This paper scrutinizes visible light communication (VLC) employing hybrid optical time division multiplexing (OTDM) wavelength division multiplexing (WDM). It also demonstrates the simulation of VLC using the direct sequence optical code division multiple access (DS-OCDMA) system developed by OptiSystem-Matlab Co-simulation. The profits of WDM and OTDM capacities have been combined using two levels of freedom to build up of the system. The performances are demonstrated in the simulated findings of the bit error rate (BER) in relationship with the data rate and the number of users. First, the simulated results display the usefulness of the system. Then, the number of users has been significantly enhanced. Besides, the OCDMA functions by appointing a specific code to each user and could provide asynchronous and simultaneous access to numerous users. One drawback is multiple access interference (MAI). The use of very long code sequences is crucial in order to lessen this effect. Hence, very large bandwidths are essential. This study aims at demonstrating, through system simulation, the practicability of an all-optical conventional correlation receiver dedicated to a DS-OCDMA access network link. Again, OptiSystem has been used to realize our blocks.

3.61 Pbit/s S, C, and L-Band Transmission With 19-Core Single-Mode Fiber

We experimentally demonstrate a 3.61 Pbit/s generalized mutual information (GMI) estimated throughput by space division multiplexing (SDM) and wavelength division multiplexing (WDM) combined transmission over 19-core single-mode fiber. Covering 17 THz bandwidth with a 25-GHz grid in S, C, and L band, 680 wavelength channels are used to deliver 24.5 GBaud probabilistically constellation-shaped (PCS) 256 quadrature amplitude modulation (QAM) and PCS-64QAM signals. The measured data rate shows a great potential for S/C/L-band transmission to dramatically enhance the achievable data rate in multi-core fibers.

Investigation of Doppler Frequency Shift Effect on the Performance of Four-Channel Space Chaotic Laser Communication

In this article, the wavelength division multiplexing (WDM) technology is applied to the space chaotic laser communication system. We deduce the bit error rate (BER) model of multi-channel space chaotic laser communication with Doppler frequency shift. Based on the BER model, the effect of Doppler frequency shift on the performance of four-channel space chaotic laser communication systems on the synchronous orbit(GEO)-low earth orbit(LEO) and GEO-mid earth orbit(MEO) has been discussed in detail. The numerical simulation results indicate that the effect of Doppler frequency shift on GEO-LEO system is much less than GEO-MEO system. Therefore, the Doppler frequency shift effect of GEO-LEO system can be overcome by redundant design, and the Doppler frequency shift effect of GEO-MEO system must be paid more attention to the optimum design. Besides, the relationship between the performance of communication system and frequency shift under different channels are similar. The result has an important implication for reducing the complexity of the system design. These results of the article are significant for the design of the four-channel space chaotic laser communication system.

On chip optical neural networks based on MMI microring resonators for image classification

We propose a new on-chip optical neural network (OONN) based on multimode interference-microring resonators (MMI-RRs). The suggested structure eliminates the need for wavelength division multiplexers (WDM) to create an optical neuron on a single chip. New microring resonator structure based on 4×4 MMI coupler with a size of 24µm × 2900 µm is used for the basic elements of the computation matrix, as a result a higher bandwidth and free spectral range (FSR) can be achieved. The Si3N4 platform along with the graphene sheet is designed to modulate the signals and weights of the neural networks at a very high speed. The Si3N4 can provide wide range of operating wavelengths and can work directly with the wavelengths of color images. The structure's benefits include rapid computing speed, little loss, and the ability to handle both positive and negative values. The OONN has been applied to the MNIST dataset with a speed faster than 2.8 to 14x times compared with the conventional GPU methods.

Ultra-Broadband Integrated Optical Filters Based on Adiabatic Optimization of Coupled Waveguides

Broadband spectral filters are highly sought-after in many integrated photonics applications such as ultra-broadband wavelength division multiplexing, multi-band spectroscopy, and broadband sensing. In this study, we present the design, simulation, and experimental demonstration of compact and ultra-broadband silicon photonic filters with adiabatic waveguides. We first develop an optimization algorithm for coupled adiabatic waveguide structures, and use it to design individual, single-cutoff spectral filters. These single-cutoff filters are 1×2 port devices that optimally separate a broadband signal into short-pass and long-pass outputs, within a specified device length. We control the power roll-off and extinction ratio in these filters using the adiabaticity parameter. Both outputs of the filters operate in transmission, making it possible to cascade multiple filters in different configurations. Taking advantage of this flexibility, we cascade two filters with different cutoff wavelengths on-chip, and experimentally demonstrate band-pass operation. The independent and flexible design of these band edges enables filters with bandwidths well over 100 nm. Experimentally, we demonstrate band-pass filters with passbands ranging from 6.4 nm up to 96.6 nm. Our devices achieve flat-band transmission in all three of the short-pass, band-pass, and long-pass outputs with less than 1.5 dB insertion loss and extinction ratios of over 15 dB. These ultra-broadband filters can enable new capabilities for multi-band integrated photonics in communications, spectroscopy, and sensing applications.

Robust traffic grooming and infrastructure placement in OTN-over-DWDM networks

The advent of next-generation networks has revolutionized modern networking practices through its improved service capability as well as its numerous emerging use cases. Coupled with the increasing number of connected devices, 5G and beyond (5G+) network traffic is expected to be increasingly diverse and high in volume. To address the large amount of data exchanged between the 5G+ core and external data networks, optical transport networks (OTNs) with dense wavelength-division multiplexing (DWDM) will be leveraged. In order to prepare for this increase in traffic, network operators (NOs) must develop and expand their existing backbone networks, requiring significant levels of capital expenditures. To this end, the traffic grooming and infrastructure placement problem is critical to supporting NO decisions. The work presented in this paper considers the traffic grooming and infrastructure placement problem for OTN-over-DWDM networks. The dynamicity and diversity of 5G+ network traffic are addressed through the use of robust optimization, allowing for increasing levels of solution conservativeness to protect against various levels of demand uncertainty. Furthermore, a robust traffic grooming and infrastructure placement heuristic (RGIP-H) solution capable of addressing the scalability concerns of the optimization problem formulation is presented. The results presented in this work demonstrate how the tuning of the robust parameters affects the cost of the objective function. Additionally, the ability of the robust solution to protect the solution under demand uncertainty is highlighted when the robust and deterministic solutions are compared during parameter deviation trials. Finally, the performance of the RGIP-H is compared to the optimization models when applied to larger network sizes.

Simulation of Coherent Electromagnetic Waves in Wavelength Division Multiplexing (WDM) Transmission

This study analyzes the application of Wavelength Division Multiplexing (WDM) in fiber optic networks which aims to find the wavelength, WDM optical spectrum and modes, as well as the CPR estimated phase and modes. In this study WDM allows the simultaneous transmission of different data streams through a single optical fiber, using different wavelengths. This research was conducted using the python OptiCommPy module. This module is used to perform modeling of complex optical fiber transmission systems by considering the various parameters and disturbances involved in optical transmission. The results obtained from this study are that WDM networks can use full or limited wavelength conversion, depending on the wavelength conversion capability of each network node. Whereas multifiber networks use fiber pools between network nodes, and multifiber WDM networks can be implemented without or with full wavelength conversion. This research can be a guide for designing coherent electromagnetic waves in WDM transmissions using the OptiCommPy python module.

Performance Analysis of the WDM Schemes for RoF System with Various Bit Rate

Communication that combines the methodologies of the two communications can be considered as communication fiber optic communication and can be used in communication systems and wireless. The integration of optical and wireless networks can function to increase mobility and capacity as well as reduce costs in access networks. Radio over fiber (RoF) can be a solution for many problems because it can control many base stations (BS) connected to a central station (CS) with an optical fiber. The high bit error rate (BER) and low Q factor value are caused by the Rof signal head received in low quality, so the receiver may not operate on high data speed networks. The solution to different signal problems and can be done with single mode fiber is the Wavelength Division Multiplexing (WDM) network. BER must be reduced to a guaranteed value, and the Q factor must be increased. WDM-RoF probes with different fiber lengths at various channel distances will be: simulated using Optisystem software, and the performance of the RoF receiver is measured and analyzed depending on the obtained BER, Q-factor value, and eye aperture height. The effects of degradation factors such as attenuation and dispersion are very limited with the addition of EDFA amplifier to Single Mode Fiber (SMF). The higher the bit rate of a communication system, the lower the performance of the system. In this study, analysis of the WDM-Rof system with bit rate variations was carried out to determine the bit rate value that still met the standard. From the simulation results, the Q-Factor and BER values at a bit rate of 11 Gbps do not meet the standards, i.e 4.50508 and 2.5390e-006.

High-accuracy wide-range refractive index demodulation based on under-sampled fiber F-P cavity length spectrum.

A scheme of fiber Fabry-Perot (F-P) cavity refractive index (RI) demodulation named under-sampled length spectrum retrieval (ULSR) is proposed. Unlike the wavelength spectrum method, ULSR can be used for physical quantity detection with just a monochromatic laser and photodetectors, avoiding the need for wideband lasers or expensive infrared spectrometers. Eight F-P cavities of different lengths were fabricated to sample the cavity length spectrum, and then the obtained under-sampled length spectrum was used to demodulate the RI of F-P cavity fillings. It was demonstrated that the ULSR system can achieve an index measurement accuracy of 1 × 10-4 in the glucose solution index range of 1.3294-1.3746 at wavelength λ = 1.55 µm. An index demodulation with higher accuracy and wider range is expected when more than 8 F-P cavities are used. The proposed scheme, with advantages of low system complexity, low cost, high reliability, high detecting accuracy, and wide detecting range, holds great promise for facilitating the wide application of F-P cavity sensors. Additionally, ULSR liberates wavelength freedom, making it a strong candidate for multiplexed sensing based on wavelength division multiplexing.

Intelligent and adaptive intra-channel and inter-channel fiber nonlinearity compensation in coherent optical transmission systems.

Fiber nonlinearity mitigation is a crucial technology for extending transmission reach and increasing channel capacity in high-baud rate wavelength division multiplexing (WDM) systems. In this work, we propose a novel, to the best of our knowledge, architecture that combines learned modified digital back-propagation (L-MDBP) to compensate for intra-channel nonlinearity and a two-stage decision-directed least mean square (DDLMS) adaptive equalizer to mitigate inter-channel nonlinearity. By leveraging globally optimized model parameters and adaptive channel estimation, the proposed scheme achieves superior performance and lower computation complexity compared with conventional DBP. Specifically, in an 8 × 64 Gbaud 16-ary quadrature amplitude modulation (16QAM) experimental system over 1600 km of standard single-mode fiber (SSMF), our approach shows a 0.30-dB Q2-factor improvement and a complexity reduction of 82.3% compared with DBP with 8 steps per span (SPS). Furthermore, we enhance the adaptability of the architecture by introducing an online transfer learning (TL) technique, which requires only 2% of initial training epochs.