Waveguide Bragg Gratings Research Articles

A Compact, Highly Sensitive pH Sensor Based on Polymer Waveguide Bragg Grating

Accurate probing, monitoring, and controlling the pH level is critical in different fields. In the last two decades, optical fiber/waveguide-based pH sensors have been widely investigated with the aim of further enhancement of sensitivity and miniaturization. Here, we propose a novel and cost-effective pH sensor based on polymer waveguide Bragg grating, addressing main aspects like sensitivity enhancement, miniaturization, narrow band response, and stable performance. The large evanescent field due to metal under cladding and high index coating combined with excellent penetration depth match with pH-sensitive polymer coating of poly-acrylic acid/poly-allylamine hydrochloride (PAA/PAH) in an aqueous medium, ensures a sensitivity of 10.4 nm/pH for a pH range of 4 to 7, two orders higher than all reported Bragg grating pH sensors to our knowledge. A narrow band (∼1 nm) response has been ensured by low propagation loss of the TE mode. Further, the variations in sensitivity and peak reflectivity are within 3% for a ±10% inaccuracy in various structural parameters, reflecting excellent fabrication tolerances. The proposed sensor is an important development, especially for the perishable food industry in which a high sensitivity in a pH range of 4 to 7 is highly desirable to accurately determine the freshness of foods.

How to suppress radiative losses in high-contrast integrated Bragg gratings

High-contrast slab waveguide Bragg gratings with 1D periodicity are investigated. For specific oblique excitation by semi-guided waves at sufficiently high angles of incidence, the idealized structures do not exhibit any radiative losses, such that reflectance and transmittance for the single port mode add strictly up to one. We consider a series of symmetric, fully and partly etched finite gratings, for parameters found in integrated silicon photonics. These can act as spectral filters with a reasonably flattop response. Apodization can lead to more box shaped reflectance and transmittance spectra. Together with a narrowband Fabry–Perot filter, these configurations are characterized by reflection bands, or transmittance peaks, with widths that span three orders of magnitude.

Integration of Bragg gratings in aerosol-jetted polymer optical waveguides for strain monitoring capabilities.

We demonstrate and discuss the integration of Bragg gratings in aerosol-jetted polymer optical waveguides, produced in the optical assembly and connection technology for component-integrated bus systems (OPTAVER) process. By using a femtosecond laser and adaptive beam shaping, an elliptical focal voxel generates different types of single pulse modification by nonlinear absorption in the waveguide material, which are arranged periodically to form Bragg gratings. Integration of a single grating structure or, alternatively, an array of Bragg grating structures in the multimode waveguide yields a pronounced reflection signal with typical multimodal properties, i.e., a number of reflection peaks with non-Gaussian shapes. However, the main wavelength of reflection, located around 1555 nm, is evaluable by means of an appropriate smoothing algorithm. When loaded by mechanical bending, a pronounced Bragg wavelength shift of this reflected peak up to 160 pm is detected. This demonstrates that the additively manufactured waveguides can be used not only for signal transmission but also as a sensor.

Large group delay and low loss optical delay line based on chirped waveguide Bragg gratings.

On-chip optical delay lines (ODLs) based on chirped waveguide Bragg gratings (CWBG) have attracted much attention in recent years. Although CWBGs are well developed, the CWBG which have large group delay (GD), large delay-bandwidth product and low loss while is circulator-free have little been investigated so far. In this work, we propose and experimentally demonstrate such a CWBG-based ODL. This device is fabricated on a low-loss 800-nm-height silicon nitride platform, combining 20.11-cm long index-chirped multi-mode spiral waveguide antisymmetric Bragg gratings with a directional coupler. The bandwidth of this circulator-free ODL is 23 nm. The total GD is 2864 ps and the delay-bandwidth product is 65.87 ns·nm, which both are the largest values achieved by on-chip CWBG reported to our knowledge. Its loss is 1.57 dB/ns and the total insertion loss of the device is 6 dB at the central wavelength near 1550 nm. This integrated CWBG can be explored in practical applications including microwave photonics, temporal optics, and optical communication.

Ultra-compact silicon photonics highly dispersive elements for low-latency signal processing.

On-chip optical group-velocity dispersion (GVD) is highly desired for a wide range of signal processing applications, including low-latency and low-power-consumption dispersion compensation of telecommunication data signals. However, present technologies, such as linearly chirped waveguide Bragg gratings (LCWBGs), employ spectral phase accumulation along the frequency spectrum. To achieve the needed specifications in most applications, this strategy requires device lengths that are not compatible with on-chip integration while incurring in relatively long processing latencies. Here, we demonstrate a novel design strategy that utilizes a discretized and bounded spectral phase filtering process to emulate the continuous spectral phase variation of a target GVD line. This leads to a significant reduction of the resulting device length, enabling on-chip integration and ultra-low latencies. In experiments, we show GVD compensation of both NRZ and PAM4 data signals with baud rates up to 24 GBd over a 31.12-km fibre-optic link using a 4.1-mm WBG-based on-chip phase filter in a silicon-on-insulator (SOI) platform, at least 5× shorter compared to an equivalent LCWBG, reducing the processing latency down to ∼ 100 ps. The bandwidth of the mm-long device can be further extended to the THz range by employing a simple and highly efficient phase-only sampling of the grating profile. The proposed solution provides a promising route toward a true on-chip realization of a host of GVD-based all-optical analog signal processing functionalities.

Polarization independent Bragg gratings using tilted subwavelength grating waveguide Bragg gratings.

We propose and experimentally demonstrate a polarization independent subwavelength grating (SWG) waveguide Bragg grating (WBG) by using an SWG waveguide with tilted segments. By optimizing the tilting angle and other geometry parameters, such as the width and the length of the loading segments used to create the BG, we can obtain a zero birefringence tilted SWG waveguide and consequently, a polarization independent SWG WBG. In our simulations, the optimal tilting angle is ∼ 58°, whereas the optimal angle obtained in fabrication is ∼ 46°. This deviation is mainly due to fabrication errors, e.g., on the sidewall angle of the silicon segments. For the optimal tilting angle of 46°, the characterized Bragg wavelengths of the TE and TM modes are both ∼ 1517 nm. We believe that the proposed device can have applications in optical communications and interconnections.

Polarization-insensitive antisymmetric multimode waveguide Bragg grating filter based on an SiN-Si dual-layer stack.

A polarization-insensitive multimode antisymmetric waveguide Bragg grating (MASWBG) filter based on an SiN-Si dual-layer stack is demonstrated. Carefully optimized grating corrugations patterned on the sidewall of a silicon waveguide and SiN overlay are used to perturbate TE and TM modes, respectively. Furthermore, the lateral-shift apodization technique is utilized to improve the sidelobe suppression ratio (SLSR). A good overlap between the passbands measured in TE and TM polarization states is obtained. Insertion losses, SLSRs, and 3-dB bandwidths of measured passbands in TE/TM polarizations are 1/1.72 dB, 18.5/19.1 dB, and 5.1/3.5 nm, respectively.

Design of two-dimensional sampled Bragg grating for a curved waveguide.

Due to the ability of changing light propagation path direction, curved waveguide Bragg grating (CWG) plays an important role in photonic integrated circuits. In this paper, we proposed a cascaded sampled Bragg grating on tilted waveguide (CSBG-TW) structure to equivalently realize CWG. As an example, by designing two-dimensional (2D) sampled gratings, the direction of +1st sub-grating vector in CSBG-TW can be changed. Then if a curved waveguide is divided into several sections of tilted waveguide, we can keep the grating direction being always parallel to the longitudinal direction of each section of tilted waveguide, while the basic grating is uniform. Hence, the required CWG can be equivalently realized, and the light responses such as reflection Bragg wavelength shift and backward mode convert caused by the tilted grating in curved waveguide can be compensated for. The results show that the sampling structures of CSBG-TW is micro-scale and the difference between reflection intensity between the CSBG-TW with four section tilted waveguide and CWG as design target is less than 0.1 dB. Compared with CWG, the CSBG-TW allows convenient holographic exposure and the wavelength can be accurately controlled. Therefore, the CSBG-TW can be used in various photonic integrated devices that require changing propagation paths.

Out-of-plane beam shaping with UV-written tilted Bragg gratings for beam delivery on quantum chips.

We theoretically and numerically investigate the performance of tilted Bragg gratings in planar waveguides, fabricated by direct UV writing in photosensitive silica, to couple light out of a chip. An analytic expression is derived for the coupling efficiency and validated numerically by finite element simulations. Using the analytic result, we can design gratings to generate output beams in free space of any specific shape and calculate their overall power coupling efficiency. Our simulations indicate that for currently achievable grating index contrasts devices of millimeter length are most suitable for this technology.

Research Progress of Wide Tunable Bragg Grating External Cavity Semiconductor Lasers.

In this paper, we review the progress of wide tunable Bragg grating external cavity semiconductor lasers (BG-ECSLs). We concentrate on BG-ECSLs based on the wide tunable range for multicomponent detection. Wide tunable BG-ECSLs have many important applications, such as wavelength-division multiplexing (WDM) systems, coherent optical communications, gas detection and atom cooling. Wide tunability, narrow linewidth and a high side-mode suppression ratio BG-ECSLs have attracted much attention for their merits. In this paper, three main structures for achieving widely tunable, narrow linewidth, high side-mode suppression ratio BG-ECSLs are reviewed and compared in detail, such as the volume Bragg grating (VBG) structure, fiber Bragg grating (FBG) structure and waveguide Bragg grating (WBG) structure of ECSLs. The advantages and disadvantages of different structures of BG-ECSLs are analyzed. The results show that WBG-ECSLs are a potential way to realize the integration, small size, wide tuning range, stable spectral output and high side-mode suppression ratio laser output. Therefore, the use of WBG as optical feedback elements is still the mainstream direction of BG-ECSLs, and BG-ECSLs offer a further new option for multicomponent detection and multi-atoms cooling.

Silicon-photonics-based waveguide Bragg grating sensor for blood glucose monitoring

We demonstrated the design of two different structures, a two-sided structure and a top-surface structure, of glucose waveguide Bragg grating (WBG) sensors in a single-mode silicon-on-insulator (SOI) chip. A two-sided WBG structure was fabricated, and chip preparation was realized by lithography and other processes. A photonic platform for testing the two-sided WBG using glucose was built and completed. When the blood glucose concentration changed by 1 mg/mL, the two-sided WBG had a wavelength offset of 78 pm. The experimental results show that the two structures can achieve the sensing of different blood glucose concentrations. The two-sided WBG had better sensing performance and thus has a wide range of application prospects.

Highly linear lithium niobate Michelson interferometer modulators assisted by spiral Bragg grating reflectors.

Highly linear electro-optic modulators are key components in analog microwave photonic links, offering on-chip direct mixing of optical and RF fields. In this work, we demonstrate a monolithic integrated Michelson interferometer modulator on thin-film lithium niobate (LN), that achieves linearized performance by modulating Bragg grating reflectors placed at the end of Michelson arms. The modulator utilizes spiral-shaped waveguide Bragg gratings on Z-cut LN with top and bottom electrodes to realize extensive reflectors, essential for linearized performance, in a highly integrated form. Optical waveguides are realized using rib etching of LN with precisely engineered bottom and top cladding layers made of silicon dioxide and SU-8 polymer, respectively. The compact design fits a 3 mm long grating in an 80 µm × 80 µm area, achieving a broad operating bandwidth up to 18 GHz. A spurious free dynamic range (SFDR) of 101.2 dB·Hz2/3 is demonstrated at 1 GHz, compared to 91.5 dB·Hz2/3 for a reference Mach-Zehnder modulator fabricated on the same chip. Further enhancement in SFDR could be achieved by reducing fiber-to-chip coupling loss. The proposed demonstration could significantly improve the linearity of analog modulator-based integrated optical links.

Integrated Subwavelength Grating Waveguide Bragg Gratings for Microwave Photonics

Bragg gratings (BGs) have numerous applications in microwave photonic (MWP) signal processing and MWP systems due to the ability to obtain custom-designed amplitude and phase responses. Moreover, waveguide BGs (WBGs) are compact and can be readily integrated with other passive and active components to realize MWP building blocks and processing systems. Subwavelength grating (SWG) waveguides and passive devices in silicon-on-insulator (SOI) have emerged as an enabler for developing break-through devices based on anisotropic metamaterials. In this paper, we review recent advances on developing SWG WBGs in SOI, including chirped, phase-shifted, sampled, and polarization (in)dependent structures. Applications of these SWG WBGs in MWP are described.

Sinusoidal and rectangular Bragg grating filters: Design, fabrication, and comparative analysis

In this paper, we compare the characteristics of several waveguide Bragg gratings (WBGs) with sinusoidal and rectangular corrugated sidewalls in high confinement integrated optics. Our measurements confirm the performance of both the rectangular and sinusoidal grating as band-rejection filters for TE-polarized signals in the telecom C-band. These measurements demonstrate record high extinction ratios of 35 and 28.91 dB for sinusoidal and rectangular WBGs with a rejection bandwidth as narrow as 4.42 and 6.165 nm. The simulation results and measurements show that the filter bandwidth and coupling coefficient can be changed by altering the corrugation width (ΔW), allowing us to control the filter’s quality factor precisely. The bandwidth of rectangular WBGs drops for ΔW>80 nm, constraining the design of devices requiring broadband WBGs. In contrast, the bandwidth of sinusoidal WBG continues to increase for ΔW>80 nm, providing a wider bandwidth for designers. These findings demonstrate the potential for effective integration of new photonic functionalities into low-footprint electro-optical waveguide tools for sensing, communicating, and computing applications.

Tunable narrow band add-drop filter design based on apodized long period waveguide grating assisted co-directional coupler.

Tunable add/drop filter based optical interconnects are an integral part of data centers as well as optical communications. Although add/drop filters based on ring resonators and waveguide Bragg gratings are well developed, long period waveguide grating (LPWG) based add/drop filters have little been investigated so far. In this article, we propose an apodized LPWG assisted co-directional coupler for narrow band add/drop filtering by combining silicon (Si) waveguide with titanium dioxide (TiO2) waveguide geometry. The proposed structure has been analyzed by combining the finite element method (FEM) and transfer matrix method (TMM), showing a good side lobe suppression ratio (SLSR) equal to 25.7 dB and an insertion loss of 0.6 dB. Owing to the high group index difference of Si and TiO2 waveguides, a narrow band response of 1.4 nm has been achieved with 800µm long LPWG. The opposite thermo-optic coefficients of Si and TiO2 ensures a good thermal tunability of the central wavelength. Considering a thin metallic heater of titanium nitride (TiN) the thermal tuning efficiency is found to be 0.07 nm/mW. Further, two LPWGs have been cascaded to realize a tunable dual channel filter with a minimum channel spacing of 185 GHz and a channel crosstalk better than 20 dB, showing its potential application towards dense wavelength division multiplexing.

Add drop multiplexers for terahertz communications using two-wire waveguide-based plasmonic circuits

Terahertz (THz) band is considered to be the next frontier in wireless communications. The emerging THz multiplexing techniques are expected to dramatically increase the information capacity of THz communications far beyond a single channel limit. In this work, we explore the THz frequency-division multiplexing modality enabled by an add-drop multiplexer (ADM) design. Based on modular two-wire plasmonic waveguides fabricated using additive manufacturing and metallization techniques, we demonstrate four-port THz ADMs containing grating-loaded side couplers for operation at ~140 GHz carrier frequency. Particular attention is paid to the design of plasmonic waveguide Bragg gratings and directional couplers capable of splitting broadband THz light into spectral and spatial domains. Finally, we demonstrate multi/demultiplexing of THz signals with bit rates up to 6 Gbps using the developed ADMs. We believe that the proposed plasmonic circuits hold strong potential to provide robust integrated solutions for analog signal processing in the upcoming THz communications.

Advances in Waveguide Bragg Grating Structures, Platforms, and Applications: An Up-to-Date Appraisal.

A Bragg grating (BG) is a one-dimensional optical device that may reflect a specific wavelength of light while transmitting all others. It is created by the periodic fluctuation of the refractive index in the waveguide (WG). The reflectivity of a BG is specified by the index modulation profile. A Bragg grating is a flexible optical filter that has found broad use in several scientific and industrial domains due to its straightforward construction and distinctive filtering capacity. WG BGs are also widely utilized in sensing applications due to their easy integration and high sensitivity. Sensors that utilize optical signals for sensing have several benefits over conventional sensors that use electric signals to achieve detection, including being lighter, having a strong ability to resist electromagnetic interference, consuming less power, operating over a wider frequency range, performing consistently, operating at a high speed, and experiencing less loss and crosstalk. WG BGs are simple to include in chips and are compatible with complementary metal-oxide-semiconductor (CMOS) manufacturing processes. In this review, WG BG structures based on three major optical platforms including semiconductors, polymers, and plasmonics are discussed for filtering and sensing applications. Based on the desired application and available fabrication facilities, the optical platform is selected, which mainly regulates the device performance and footprint.

Resonant multilevel optical switching with phase change material GST

Abstract We demonstrate a multilevel optical memristive switch based on a silicon Fabry–Perot resonator. The resonator is constructed by a pair of waveguide Bragg gratings at the ends of a multimode interferometer (MMI) covered with sub-micrometer-size Ge2Sb2Te5 (GST) thin film on top. The interaction between the optical field and GST is greatly enhanced due to the resonant effect. The GST phase transition is triggered by applying electrical pulses to the doped-silicon microheater. Light is transmitted when GST is amorphous while it is highly absorbed by the crystalline GST at the resonance wavelength, leading to a higher on-off extinction ratio (ER) compared to the non-resonant device. The resonant device achieves a maximum transmission contrast of 10.29 dB and a total of 38 distinct nonvolatile switching levels. Our work provides an effective solution to improving the multilevel switching performance of phase-change devices and paves the way for future nonvolatile silicon photonics devices.

Single polarization, narrow linewidth hybrid laser based on selective polarization mode feedback

We demonstrate a single polarization, narrow linewidth hybrid laser by using a semiconductor gain chip and a birefringence silica-on-silicon waveguide Bragg grating. The hybrid laser shows good linewidth and single polarization characteristics with the selective polarization mode feedback of high birefringence grating. The temperature phase modulation on the characteristics of the potentially lasing modes is displayed. In addition, the performances of different mode power, side mode suppress ratio, spectrum and linewidth during temperature tuning are characterized. We based on the rate equation method and the chirp factor reduction theory analysis the variation of laser linewidth with power and lasing wavelength. The best linewidth achieves 4.36 kHz and the best polarization extinction ratio is 38.6 dB. The output power in fiber is 6.58 mW.

Sensing Techniques and Interrogation Methods in Optical MEMS Accelerometers: A Review

In this article, we review optical MEMS accelerometers with a particular focus on sensing techniques and interrogation methods. Optical accelerometers find use in various application domains ranging from microgravity to inertial navigation to vibration sensing. The performance of an accelerometer is quantified in terms of its range, bandwidth, sensitivity, and resolution. The combination of sensing technique and interrogation method determines the optical accelerometer’s performance. This article presents a classification in terms of guided-wave and free-space based optical sensing techniques used in acceleration measurement and their review. In free-space based sensing techniques, light propagating in free-space interacts with the mechanical structure resulting in modification of light properties at the receiver. In guided-wave based sensing techniques, light interaction with the mechanical structure is confined to the waveguide. Also, the different interrogation methods used in optical MEMS accelerometers are reviewed. The interrogation methods are classified as based on intensity modulation or frequency modulation of the optical signal received from sensor. In intensity-modulation based interrogation, light intensity at output is the measurand and, the cost and complexity of this class of methods is lower. In frequency-modulation based interrogation, the frequency or phase of the optical signal at the output is the measurand. Further, a high-resolution optical MEMS accelerometer based on waveguide Bragg gratings is described. A combination of free-space based sensing and intensity-modulation based interrogation methods will be suitable for consumer-grade accelerometer applications. For high-resolution applications like tactical and navigation grades, a combination of guided-wave sensing and frequency-modulation based interrogation methods would be appropriate.