Waves In Range Research Articles

High-speed noncontact acoustic inspection using acoustic irradiation induced vibration from unmanned aerial vehicle

The noncontact acoustic inspection method using laser Doppler vibrometer and acoustic irradiation induced vibration is a method that can be used as an alternative to the hammer method because it uses flexural resonance. Experiments have already been carried out on railway and national highway tunnels, viaducts over 30m, and shotcrete with unevenness in underground cavities, confirming the usefulness of this method. On the other hand, this method has the problem of environmental noise and angular dependence. However, when the sound source is mounted on the UAV, the position of the sound source can be directly opposed to the surface to be measured, and this environmental noise and angle dependency problem is expected to be solved. In addition, since this method does not require a scaffold or an aerial work vehicle, there is a possibility that inspection costs can be reduced and work efficiency can be improved. Therefore, an experiment using a sound source-mounted UAV and a tiled outer wall specimen was performed. From the experimental results, it was clarified that defects within the directivity range of sound waves can be detected even if the UAV fluctuates due to wind. In the future, it will be possible to detect defects with higher accuracy by applying artificial intelligence to the measured waveform.

Blazar S 0528+134 is possibly the most powerful emitter in the Universe, including in the range of gravitational waves

A new method of determining the parameters of close binary systems of supermassive black holes (SMBHs) and the level of gravitational waves (GWs) on the Earth's surface are proposed. Data are presented from long-term monitoring of possibly the most powerful emitter in the Universe, S 0528+134, at five frequencies in the radio range from 4.8 GHz to 37 GHz, obtained by the RT-22 radio telescope of the Radio Astronomy Laboratory CrAO in Simeiz, the RT-26 radio telescope at Michigan Observatory, and the 40 m radio telescope of the Owens Valley Radio Observatory. The dynamics of powerful flares that have occurred in the object since its discovery in a sky survey in 1970 were considered. The main physical characteristics of binary SMBHs located in the central regions of the system were obtained. These data were used to find the masses of the SMBH companions, the parameters of their orbits, the energy reserve of the system, and the lifetime of the object before the SMBHs' merger. The level of GWs on the Earth's surface was determined and the possibility of their detection by International Pulsar Timing Array (IPTA) GW detectors was considered.

Field Observations of Surfzone Vorticity

AbstractIn the surfzone, breaking‐wave generated eddies and vortices transport material along the coast and offshore to the continental shelf, providing a pathway from land to the ocean. Here, surfzone vorticity is investigated with unique field observations obtained during a wide range of wave and bathymetric conditions on an Atlantic Ocean beach. Small spatial‐scale [O(10 m)] vorticity estimated with a 5 m diameter ring of 14 current meters deployed in ∼2 m water depth increased as the directional spread of the wave field increased. Large spatial‐scale [O(100 m)] vorticity calculated from remote sensing estimates of currents across the surfzone along 200 m of the shoreline increased as alongshore bathymetric variability (channels, bars, bumps, holes) increased. For all bathymetric conditions, large‐scale vorticity in the inner surfzone was more energetic than in the outer surfzone.

Simulation and Optimization of Transmitting Transducers for Well Logging.

Piezoelectric transducers are commonly used in acoustic well logging. However, the low frequency and narrow range of the acoustic waves limit the achievable detection accuracy. In addition, the low amplitude of the waves causes useful information to be easily masked by noise during detection, which affects the accuracy of geological identification and makes it difficult to detect formations tens of meters away. This paper proposes a microporous liquid-electric transmission transducer, in which the microporous electrode structure generates a powerful shock wave through a high-energy instantaneous discharge. First, a model of the liquid-electric microporous transmitting transducer was constructed by combining simulations with numerical calculations, and its electro-acoustic characteristics were analyzed. Then, based on the survey requirements, two innovative optimization schemes for the microporous electrode structure were proposed, namely a triangular pyramid microporous electrode structure and a rectangular microporous electrode structure, and their performances were compared. The results show that the newly optimized triangular pyramid microporous electrode liquid-electric transducer generates acoustic waves with higher amplitude and a wider frequency range than conventional piezoelectric transducers and other microporous structures. It maintains high energy while achieving high frequencies, enabling detection at distances of up to hundreds of meters and the precise characterization of small geological bodies. This has significant implications for applications in marine exploration, land exploration, clean energy, and new energy fields.

Application of Fourier Transform Infrared (FTIR) spectroscopy for the analysis of legume seeds

Legume seeds are highly valued for their rich nutritional profile and many culinary applications, making them essential to human diets in many civilizations worldwide. Legume seeds have lower protein content comparable to that found in animal sources. Legumes have many health benefits, such as improved blood sugar control, weight management, cardiovascular health, and a reduced risk of developing chronic diseases, including diabetes, cancer, and heart conditions. The functional groups in legume seeds such as black chickpea, cowpea, white chickpea, small red bean, and red lentil were analyzed using FTIR spectroscopy combined with principal compound analysis. The findings indicated that five samples had O-H stretching, C-H stretching, and N-H stretching bonds in the wave number range of 2924 cm- 1, which implies the presence of alcohol, carboxylic acid, amine salt, and alkane. The nitro compound having N-O stretching was observed in all samples except white chickpea. All the samples have C-F stretching bonds, representing the presence of fluoro compound in the wave range of 1002- 1115 cm-1, except for red beans. It is worth noting that the properties of red lentils differ significantly from those of black chickpeas and cowpeas, and the properties of cowpeas differ from those of small red beans.

Observation of high frequency Alfvén eigenmodes excited by RF-accelerated minority hydrogen ions in the EAST tokamak

Abstract The paper presents the original observation of high frequency Alfvén eigenmode excited by fast minority hydrogen ions accelerated by ion cyclotron range of frequency waves in EAST. The frequency of high frequency Alfvén eigenmodes is around 0.75~8*Ω H, where Ω H is the cyclotron frequency of hydrogen ions evaluated at the low-field side plasma edge. It tracks the on-axis magnetic field B t and the edge plasma electron density n e via the Alfvenic relation ω~ B t *n e -1/2. The high frequency Alfvén eigenmodes are always accompanied by sub-cyclotron modes in several experiments at EAST, consistent with the high frequency Alfvén eigenmode detected on other conventional tokamaks, namely ASDEX Upgrade and DIII-D. Based on the previous study, these sub-cyclotron modes are consistent with the spectrum splitting produced by toroidal mode numbers[Nuclear Fusion 43, 228 (2003)]. We also found that the location of eigenmode excitation of high frequency Alfvén eigenmode driven by RF-accelerated minority hydrogen ions remains unchanged even though the cyclotron resonance location of hydrogen ions varies with B t.

Adaptive Matching of Discrete Antenna Tuning Units of High Frequency Band to Varying Load Impedance

The issue of matching the antenna with thetransmitter-receiverplays a primary role in radio communications. The matching problem is relevant for different ranges and is solved in many ways. In the high frequency wave range, matching has a number of features when using an antenna coupler based on discrete elements consisting of capacitance and inductance boxes. The article discusses the concept of fast matching of high-frequency amplifying paths ofdecametric wavestransceivers with non-stationary loads using discrete antenna couplers. An innovative approach has been developed to the tuning process when changing the operating frequency and ensuring self-adaptation of the antenna coupler when changing the impedance, based on methods for quickly searching for the geometric proximity of points. A quick method for configuring the antenna coupler is proposed, eliminating the procedure for recalculating the input impedance based on the results of measuring the input impedance of the antenna coupler. When using it, the speed of setting the antenna coupler at the current operating frequency is limited only by the time of a single state change of the discrete power circuit, which in the case of electromagnetic relays is numerically equal to their switching time. The configuration of the antenna coupler using the method of fast search for the geometric proximity of points is based on a set of frequency cards with settings options. Such cards can be recalculated for the reference plane between the generator and the antenna coupler input for all combinations of discrete elements in accordance with the known matrix model of a discrete power circuit. This eliminates the complicated procedure of recalculating the input impedance of the antenna using complex numbers. The technical result of the proposed innovative method of antenna coupler configuringis simplification, tracking of systematic errors of the impedance meter, elimination of time-consuming calculations with complex numbers, expansion of the method functionality, reduction of the tuning duration and improvement its quality. The practical significance lies in the fact that the implementation of the proposed technical solutions in the high frequency range communications means can significantly (about 100 times) limit the duration of preparation for a radio communication session, eliminate the procedure for recalculating the antenna input impedance and reduce the resource requirements of switching elements.

Enhanced Sensing of Diseased Blood Samples through One-Dimensional MgO-SiO2 Photonic Crystal Sensor

In this investigation, we present a tailored one-dimensional photonic crystal sensor (1D PCS), magnesium oxide (MgO) and silicon dioxide (SiO2) layers designed for the specific detection of diseased blood samples components, including plasma, platelets, red blood cells, and uric acid concentrations. The sensor structure is architecturally optimized for 6, 8,10,12,14, and 20 periods, encapsulating a central defect cavity that facilitates the interaction with the blood samples. Upon introducing the blood samples into this cavity, the transmittance spectrum is meticulously analyzed using the transfer matrix method to observe the variations in the defect mode’s wavelength. The study is conducted over a range of incident waves from wavelength 450 to 750 μm, enhancing the understanding of the sensor’s effect on the detection mechanism. In this context, our sensor demonstrates a remarkable sensitivity of approximately 815 nm per refractive index unit (RIU-1). It achieves a detection limit of 10–5, showcasing an exceptional ability to detect low concentrations of the infected blood components.Moreover, Q Factor of 3795 and FOM of 3369.18 indicate the sensor’s high precision in differentiating between healthy and infected blood samples.These findings underscore the potential of the proposed MgO-SiO2-based 1D PhC sensor in serving as a high-fidelity tool for biosensing application.

Simultaneous Occurrence of Electromagnetic and Quasi‐Electrostatic Magnetosonic Waves

AbstractMagnetosonic (MS) waves usually manifest as electromagnetic fluctuations, while quasi‐electrostatic magnetosonic (QEMS) waves have been recently reported. Here we present an intriguing coexistence of low harmonic electromagnetic magnetosonic (EMMS) waves and QEMS waves within the same band. Ion Bernstein instabilities are calculated based on the observed proton distribution. Effective growth rates can occur in the first‐fourth harmonic bands with a broad wave number range when the wave normal angle is sufficiently large. In each harmonic band, the MS waves would transform from electromagnetic to electrostatic as the wave number increases. This study reveals that the simultaneous occurrence of EMMS and QEMS arises from the expansive excitation range of MS waves in ‐space, thereby implying the potential resonant interactions between MS and particles in a broad energy spectrum.

Novel soliton solutions and phase plane analysis in nonlinear Schrödinger equations with logarithmic nonlinearities

This paper investigates a generalized form of the nonlinear Schrödinger equation characterized by a logarithmic nonlinearity. The nonlinear Schrödinger equation, a fundamental equation in nonlinear wave theory, is applied across various physical systems including nonlinear optics, Bose–Einstein condensates, and fluid dynamics. We specifically explore a logarithmic variant of the nonlinear Schrödinger equation to model complex wave phenomena that conventional polynomial nonlinearities fail to capture. We derive four distinct forms of the nonlinear Schrödinger equation with logarithmic nonlinearity and provide exact solutions for each, encompassing bright, dark, and kink-type solitons, as well as a range of periodic solitary waves. Analytical techniques are employed to construct bounded and unbounded traveling wave solutions, and the dynamics of these solutions are analyzed through phase portraits of the associated dynamical systems. These findings extend the scope of the nonlinear Schrödinger equation to more accurately describe wave behaviors in complex media and open avenues for future research into non-standard nonlinear wave equations.

Respiratory sinus arrhythmia: physiological mechanisms and relationship with systemic blood pressure fluctuations

Respiratory sinus arrhythmia (RSA) reflects the functioning of the nervous heart control, predominantly of a parasympathetic nature. The study of RSA mechanisms helps to reveal the physiological patterns of regulation of cardiac activity, and the development of new approaches to its assessment is an urgent medical task. This review will examine experimental approaches that have contributed to the development of modern ideas about autonomic nervous system role in the formation of RSA, as well as the connection between RSA and frequency-matched fluctuations in systemic blood pressure. In addition, we will consider new data on the phase relationships of fluctuations in heart rate and blood pressure in the frequency range of respiratory waves, obtained using wavelet analysis of these physiological signals.

Structure determination of 2,5-difluorophenol by microwave spectroscopy

The Fourier transform microwave spectrum of 2,5-difluorophenol has been obtained in the centimeter wave range, revealing only one conformer stabilized by an intramolecular interaction where the hydrogen atom of the OH group is in a syn orientation to the fluorine atom at the 2-ring position. The heavy atom backbone structure was obtained from the rotational constants of the 13C and 18O isotopologues whose spectra were measured in natural abundance. The spectrum of the OD isotopologue obtained by deuterium enrichment was also measured, and the nuclear quadrupole hyperfine structures arising from deuterium were analyzed. The semi-experimental equilibrium structure (reSE) was determined by correcting the experimental rotational constants with the vibration-rotation interaction constants obtained via an anharmonic force field. Quantum chemical calculations at various levels of theory were used to support results from the experiments.

Study on the generation of terahertz waves in collision plasma

Terahertz communication technology holds promise for solving the challenging “blackout” problem. Research has revealed that the spectrum exhibits new peaks when terahertz waves propagate through plasma. In the realm of communications, elucidating the underlying physical mechanisms responsible for these novel peaks is of paramount importance. In this paper, a combination of theoretical analysis and simulation is utilized to investigate the causes of these spectral changes. Theoretically, the expression for the relative dielectric constant of plasma has been refined by incorporating collision terms. Drawing on radiation theory, a particle whose motion is interrupted by collisions can be considered equivalent to a damped harmonic oscillator. Thus, the frequency expression of the new peak was derived. Furthermore, the simulation involved the interaction of a terahertz wave, which had a frequency of 1 THz and lasted for 2 ps, and plasma characterized by a central electron density of 1021 m−3 and a collision frequency of 0.114 THz. The simulation results are consistent with the frequency expression of the new peak. In sum, this study found that collisions between electrons and neutral particles within plasma cause a shift in the frequency of terahertz waves, and has derived the frequency expression. This plasma model can be used to estimate the frequency range of terahertz waves that are generated as they propagate through collisional plasmas.

A Parametric Study of Locally Generated Magnetosonic Waves by Ring‐Beam Hot Protons in the Martian Heavy Ion‐Rich Environment

AbstractMagnetosonic (MS) waves with frequencies above the proton gyrofrequency can be locally generated by ring‐beam protons in the Martian heavy ion‐rich ionosphere. In this study, we conduct a parametric analysis to investigate the effects of heavy ion concentrations, energy (Erb), and angle (αrb) of ring‐beam protons, and wave normal angle on the excitation features of Martian ionospheric MS waves. We find the growth rates and frequency range of MS waves decrease by including O+ and O2+ ions but are insensitive to their relative concentrations. With increasing Erb or αrb, the growth rates of MS waves show a general dropping tendency. Meanwhile, their frequency and wavenumber range are almost unaffected by increasing Erb but shrink to a narrower range mainly distributed in high frequencies by increasing αrb. Unstable MS waves expand to a wider wavenumber range but shrink to a narrower frequency range as they become more oblique.

Frequency Shift in Microwave Circuits Manufactured with Circuit Board Plotters: Case Study of a Parallel Coupled Lines Filter

Board milling is one of the most widespread methods for manufacturing printed circuit boards from low frequencies to the microwave and millimeter wave range. In this contribution, the detrimental effect of defects typical of printed circuit board plotters has been investigated. In detail, a systematic frequency shift in the circuit performance has been observed both in terms of S21 and S11 parameters. The performance degradation has been analyzed and attributed to the inaccurate milling depth, which is typical of many plotters, particularly for less recent models. After the conductor removal step, the unwanted milling of dielectric material changes the electrical properties of the microstrip structure, in turn affecting the circuit performance. This circumstance has been investigated by means of electromagnetic simulations performed on the real case study of a parallel coupled lines filter. Therefore, a filter prototype has been realized and measured to confirm the simulated results. This study can be beneficial to those professionals involved in the design and realization of microwave and millimeter waves circuits with board milling machines.

Advancement in Carbon Nanotubes Optoelectronic Devices for Terahertz and Infrared Applications

AbstractBenefiting from the outstanding optical, thermal, electrical, and mechanical properties, carbon nanotubes (CNTs) hold significant potential in the fields of materials, physics, chemistry, biology, as well as emerging disciplines such as electronics and optoelectronics. This paper provides a comprehensive review of the latest developments of CNTs optoelectronic devices operating in the terahertz (THz) and infrared (IR) wave range. At the beginning of this review, the unique structural characteristics of CNTs are introduced, overviewing their fundamental electronic structure, and emphasizing their impact on optoelectronics behavior. Further, on various synthesis techniques are discussion employed for the growth of single nanotube and the preparation of CNTs films. The penultimate section, the optical properties of CNTs are analyzed within the THz and IR spectral region and overview the application of THz time‐domain spectroscopy in extracting key material parameters of CNTs, and further discuss the theoretical models describing THz conductivity in CNTs. In the end, the most promising CNTs‐based device concepts are highlighted for sources, detectors, modulators, absorbers, and sensors within in THz and IR frequency band. This comprehensive review provides a valuable insight into the utilization of CNTs across various aspects of THz and IR optoelectronic devices.

Monitoring the parameters of printed strip lines in the microwave range of electromagnetic waves

The characteristic impedance of printed strip lines is determined by their design, cross-sectional geometry, relative permeability of the insulating base, and other factors that cannot be accurately estimated. The known methods for monitoring its frequency dependence using microwave measurements are not perfect and require further development. The proposed work proposes a method for experimental monitoring of the entire set of parameters of printed strip transmission lines: wave impedance, relative effective dielectric constant, as well as phase velocity and attenuation coeffi cient of a propagating electromagnetic wave. The characteristic impedance is determined by the s-parameters of the connection of coaxial strip junctions with a segment of an electrically long line. The wave parameters measured in the coaxial channel are transformed in the area of contact of the coaxial and strip lines, which makes it possible to obtain an analytical estimate of the wave impedance over the entire frequency range of the vector network analyzer or at least in its individual frequency windows. In the proposed method, the phase velocity, attenuation coeffi cient and relative effective dielectric constant are controlled by the differential-phase method based on the results of measuring the transmission coeffi cients of coaxial strip junction connections transformed to the contact areas by sections of electrically long and short printed stripline transmission lines. The performance of the proposed method for monitoring the parameters of printed strip lines is confi rmed by automated modeling, and its effectiveness is confi rmed by a full-scale experiment. The results obtained are useful to development engineers of integrated microwave technology and specialists in the field of monitoring object parameters in non-standard guide systems.

Vibration control and transmission mechanism of super high-rise building located on subway based on spring vibration isolation system

This study focuses on the vibration control effect of the spring vibration isolation system (SVIS) on a super high-rise building located on the subway (BLS) and the transmission mechanism of vibration in super high-rise BLS. Firstly, the 1:35 scale shaking table test model of super high-rise BLS is designed, the rationality of the shaking table test model is verified, and the shaking table test is implemented. Secondly, the finite element model (FEM) is established and verified based on the results of the shaking table test. Finally, based on verified FEM, the vibration control effect of SVIS on super high-rise BLS and the vibration transmission mechanism of super high-rise BLS is analyzed. The results show that the vibration response of the BLS show amplification trend along the height direction. The amplification of vibration response of BLS is effectively controlled by SVIS. The higher the floor, the greater the reduction coefficient, and the better the control effect. The reduction coefficient above 10F is mainly distributed above 0.80 due to the SVIS. The BLS equipped with the SVIS maintains the degree of Z-direction vibration and 1/3 octave vibration acceleration level that is within the limits stipulated by the specifications. The first-order vertical frequency of BLS equipped with the SVIS is adjusted from 65 Hz to 8 Hz, far from the favorable frequency range of the subway wave.

Second-harmonic generation tensors from high-throughput density-functional perturbation theory

Optical materials play a key role in enabling modern optoelectronic technologies in a wide variety of domains such as the medical or the energy sector. Among them, nonlinear optical crystals are of primary importance to achieve a broader range of electromagnetic waves in the devices. However, numerous and contradicting requirements significantly limit the discovery of new potential candidates, which, in turn, hinders the technological development. In the present work, the static nonlinear susceptibility and dielectric tensor are computed via density-functional perturbation theory for a set of 579 inorganic semiconductors. The computational methodology is discussed and the provided database is described with respect to both its data distribution and its format. Several comparisons with both experimental and ab initio results from literature allow to confirm the reliability of our data. The aim of this work is to provide a relevant dataset to foster the identification of promising nonlinear optical crystals in order to motivate their subsequent experimental investigation.

Tsunami Waves off the Southeastern Coast of Sakhalin Island Caused by the Eruption of the Hunga–Tonga–Hunga–Ha’apai Volcano on 15 January 2022 According to Observations by Bottom Devices of Waves

The observation of waves (sea level oscillations) in the coastal water area of the southeastern coast of Sakhalin Island was carried out from November 2021 to May 2022 using bottom-mounted high-precision ARW 14 K devices with one second discreteness. The analysis of the obtained time series revealed the presence of anomalous waves in the range of tsunami waves in January 2022. It is shown that the waves detected on 15 January 2022 with periods of 15 minutes–4 hours, significantly standing out above the background, are associated with volcanic tsunami waves. Spectral analysis of the time series showed that the maximum in the spectra of sea level oscillations found after the volcanic eruption is close to the period of the first mode of the shelf seiche. This indicates that incoming tsunami waves excite shelf seiches in the coastal zone and contribute to the generation of longshore and transverse seiches into Mordvinov Bay. Time series analysis made it possible to establish that the spectral density of sea level oscillations for the time interval of the beginning of the eruption of the Hunga–Tonga–Hunga–Ha’apai volcano from 21 December 2021 to 11 January 2022 significantly differs from the spectral density for the time of the Plinian volcanic eruption. An analysis of the statistical characteristics of sea level oscillations performed on two–day series in the range of periods 1 min–4 h for background waves and tsunamis showed an increase in the rms by 3.5 times for a time series containing tsunami waves. It has been established that for background time series containing tsunami waves, the coefficients of asymmetry and kurtosis differ little from“Gaussia” values. This indicates that the arrival of tsunami waves from distant sources does not significantly disrupt the stationarity of the wave field in the observation area.