Water Vapor Permeability Of Films Research Articles

Improved moisture barrier and mechanical properties of rice protein/sodium alginate films for banana and oil preservation: Effect of the type and addition form of fatty acid

Attenuating the moisture sensitivity of hydrophilic protein/polysaccharide-based films without impairing other properties remains a challenge. Fatty acid dispersed in Pickering emulsion was proposed to overcome such issue. An increase in fatty acid chain length slightly reduced the water vapor permeability (WVP) of emulsion films. As the number of fatty acid double bonds increased from 0 to 1, the WVP of emulsion films was significantly decreased by 14.02% while mechanical properties were significantly enhanced. More hydrogen bonds and stronger electrostatic interactions in the presence of fatty acids were observed by molecular dynamics simulation. The weight loss of bananas coated with oleic acid-incorporated film-forming emulsion was 6.81% lower than that of uncoated group after 4 days, and the corresponding film was more effective to delay oil oxidation than the commercial polypropylene film, indicating that the film is a promising alternative to food coating and packaging material.

Development and characterization of multifunctional fish gelatin composite films reinforced with ε‐polylysine and zinc oxide nanoparticles

AbstractActive compounds were usually incorporated into biopolymer films to enhance their properties. The tensile strength (TS) and elongation at break (EAB) of the gelatin composite films increased along with the addition of ε‐polylysine (ε‐PL) and zinc oxide nanoparticles (nano‐ZnO). When the concentrations of ε‐PL and nano‐ZnO were 4% and 0.5%, TS and EAB reached to the maximum which were 53.98 ± 2.61 MPa and 16.05 ± 1.76%. The water vapor permeability, water solubility, and water content of the composite films decreased from 2.01 ± 0.04 10−10 g m−1 Pa−1 s−1 to 1.56 ± 0.07 × 10−10 g m−1 Pa−1 s−1, from 45.23 ± 1.54% to 31.39 ± 1.24% and from 23.89 ± 1.41% to 17.34 ± 2.61%, respectively, compared with gelatin film. The light barrier capacity of the composite film was improved. The surface of the film was relatively smooth, and the cross‐section was overall flat. FTIR results indicated that no chemical reaction occurred among ε‐PL, nano‐ZnO and gelatin. The chemical structure of the films remained unchanged throughout the heat‐sealing process. Moreover, the gelatin films containing ε‐PL and nano‐ZnO showed excellent antibacterial activity. Our findings suggest that the gelatin composite films with antibacterial property hold promise for the application in food packaging materials.

Development and characterization of innovative bio-based edible films supplemented with cell-free supernatant and whole-cell postbiotic of Lactobacillus gasseri

More recently, the concepts of cell-free supernatants (CFS, so-called postbiotics) and whole-cell postbiotics (WCP) of probiotics have gained increasing attention for the development of bio-based films. However, reports on CFS and WCP of Lactobacillus gasseri remain scarce. In this study, pea protein isolate/psyllium mucilage was incorporated with CFS and WCP of L. gasseri to produce bio-based edible films. pH, total soluble solid content, antioxidant activity, total phenolic content, antimicrobial activity, and structural analyses were conducted to characterize the CFS and WCP of L. gasseri. Furthermore, the effects of CFS (10% and 20%, v/v) and WCP (10% and 20%, v/v) on the physicochemical, mechanical, barrier, optical, microstructural, and antimicrobial properties of the bio-based films were investigated. The results showed that CFS and WCP exhibited antioxidant and antibacterial activities and were significant sources of phenolic compounds. The incorporation of 20% WCP caused a significant increase in the thickness and water vapor permeability of films, while a significant increase in moisture content was observed with 10% WCP. The control and 10% WCP films had the highest tensile strength values. Furthermore, the addition of 10% WCP resulted in a significant increase in elasticity. Films incorporating CFS and WCP exhibited lower opacity values and darker, yellow, and red color intensities. The addition of CFS and WCP caused a rough texture and cracked structure on the surface of the film. In conclusion, pea protein/psyllium mucilage-based films containing CFS and WCP of L. gasseri can be considered as a new alternative for environmentally friendly bio-based films.

A synergistic influence of gallic acid/ZnO NPs to strengthen the multifunctional properties of methylcellulose: A conservative approach for tomato preservation

Biodegradable and sustainable food preservation materials have gained immense global importance to mitigate plastic pollution and environmental impact. Biopolymers like cellulose offer significant advantages for food preservation, including biodegradability and the ability to extend shelf life. Therefore, the present study aims to prepare gallic acid (GA) and zinc oxide nanoparticles (ZnO NPs) incorporated methylcellulose (MC) composite films by employing a solvent casting technique. The homogeneous SEM micrographs and FTIR spectra evidenced high compatibility among MC and GA/ZnO NPs. The UV barrier capacity, mechanical properties and surface hydrophobicity are remarkably enhanced by GA/ZnO NPs. However, the water vapour permeability and oxygen permeability of MGZ films were reduced by 49.19 % and 57.75 % respectively. Moreover, the MGZ films demonstrated exceptional antioxidant efficacy (∼94.48 %) and inhibition against food-borne pathogens such as B. subtilis, S. aureus (Gram-positive), E. coli, P. aeruginosa (Gram-negative), and C. albicans fungi. Furthermore, the GA/ZnO NPs extended the shelf life of MGZ coated tomato samples up to 27 days and exhibited controlled microbial growth after the preservation study. These results support the application of MGZ films as suitable and effective coating materials for food packaging applications.

Chitosan-casein blended with condensed tannin and carnauba wax for the fabrication of antibacterial and antioxidant food packing films.

In this study, various chitosan-based films such as chitosan (C), chitosan-condensed tannin (CT), chitosan-casein (CC), and chitosan-casein-condensed tannin (CCT) films were prepared for the purpose of food packaging. In order to improve the hydrophobicity of these films, carnauba wax was blended into CCT to produce CCTW film. Properties such as morphology, UV resistance, water solubility, barrier performance, tensile strength, antioxidant, antibacterial and its performance as food packaging were evaluated. Compared with other chitosan-based films, CCTW films exhibited higher UV resistance, tensile strength, thermal stability and hydrophobicity. The addition of both condensed tannin and carnauba wax has significantly decreased the water vapor and oxygen permeability of the CCTW films. The CCTW films were proved capable of repelling most daily consuming liquids. Besides, CCTW films displayed outstanding free radical scavenging rate and antibacterial properties. Meanwhile, bananas wrapped with CCTW films remained fresh for seven days without any mold growth and outperformed other types of films. Apart from that, the CCTW films also showed biodegradable characteristics after exposure to Penicillium sp. These distinguished characteristics made the CCTW films a promising packaging material for long-term food storage.

Potato flour‐based film: Effect of gelatine on the rheological, thermal, mechanical and barrier properties

SummaryPotato flour/gelatine films in different ratios (6:0, 5:1, 4:1, 3:1, 2:1 and 1:1) were prepared and their properties were examined in this study. Potato flour film‐forming dispersion without gelatine showed the highest particle size and apparent viscosity. As the gelatine concentration increased, the composite films became smoother and more transparent. Gelatine incorporated with potato flour films reduced the retrogradation enthalpy and glass transition temperature, leading to the low tensile strength and high elongation at break. Although water content and water solubility index increased with the higher gelatine concentration, water vapour permeability of composite films decreased from 14.59 × 10−13 gm−1s−1Pa−1 to 5.83 × 10−13 gm−1s−1Pa−1. In addition, it was noted that water contact angle increased from 24.50° to 102.33° as gelatine concentration increased from 0% (6:0) to 50% (1:1). According to these findings, potato flour film with the presence of gelatine showed the better moisture barrier properties.

Effect of glycerol plasticizer on the structure and characteristics of bacterial cellulose-based biocomposite films

Abstract Biocomposite film was successfully produced by combining bacterial cellulose (BC) and sodium alginate (ratio of 80:20) with the addition of glycerol as conventional plasticizer at varied concentration (2, 4, 6% w/w, based on total sample weight) through solution casting method. The influence of glycerol content on structure (by FTIR), mechanical properties, optical properties (by colorimeter and spectrophotometer) and water vapor permeability (WVP, gravimetric method) of BC biocomposite film was investigated. The addition of glycerol disrupts the inter- and intramolecular hydrogen bonds in the cellulose chains, replaced by weaker BC-alginate-glycerol bonds. This resulted a decrease in film density, causing lower tensile strength, lightness, opacity and WVP of BC biocomposite film. An increase in glycerol concentration led to an increase in elongation percentage due to the effect of glycerol plasticization. Film with 4% glycerol exhibited the lowest WVP (5.08x10-13 g/m.s.Pa), highest lightness (L = 73.49), lowest opacity (3.24 Abs/mm) with tensile strength of 19.57 MPa and elongation 8.38%. The addition of glycerol significantly affects the BC biocomposite film properties. The resulting biofilm shows performance equivalent to commercial bioplastic TeloRoll.

Investigation of film Physical properties under various starch thermal treatments with emphasis on Retrogradation effects

This study investigated the changes in the physical properties of cornstarch-based films as they were retrogradely aged at different temperatures. Using a casting method, the films were fabricated, and their effects on the mechanical properties, thermal stability, barrier properties, and essential properties were analyzed. With prolonged aging and retrogradation periods, reductions in film thickness, solubility, water content, and water vapor permeability of 5.35%, 9.92%, 29.61%, and 20.94%, respectively, were observed. In addition, the surface roughness decreased by 44.46% for Rq (root-mean-square roughness) and 45.61% for Ra (arithmetic average roughness), while the elongation at break decreased by 72.64%. Conversely, the tensile strength, maximum degradation rate, and maximum degradation temperature increased by 116.98%, 99.5%, and 3.21%, respectively. These results provide a fundamental understanding of the changes that occur in the properties of cornstarch-based films during aging and retrogradation.

Utilization of Pickering emulsion stabilized by chitin nanofibers for improving water and oxygen resistance of gelatin films

The hydrophilicity of gelatin films obviously limits their application. In this work, novel protonated chitin nanofiber was prepared with green methods, surficial deacetylation combined with acidic and mechanical treatment. Composite films with excellent water and oxygen barrier properties were successfully prepared by blending O/W Pickering emulsions stabilized by chitin nanofibers with gelatin substrates. The films were characterized by Fourier-transform infrared, X-ray diffraction, mechanical properties, water and oxygen permeability, moisture content, water solubility, water contact angle and optical properties. The results demonstrated that the amino groups of chitin nanofibers bound to the carboxyl groups of gelatin via electrostatic interactions, which contributing to the excellent mechanical and barrier properties of composite films. The elongation at break of composite film (the concentration of chitin nanofiber was 0.2 wt%) was 2.66 times of gelatin film. And the water vapor and oxygen permeability of composite films lowered to 65.9 % and 52.9 %, respectively. The introduction of O/W Pickering emulsion significantly enhanced the hydrophobicity of gelatin-based film and the chitin nanofibers played a positive role in stabilizing the gelatin chains to a certain extent. This study expands the application fields of gelatin-based films and provides valuable technical route for the preparation of barrier films.

Production of PLA/cellulose derived from pineapple leaves as bio-degradable mulch film

Mulch films were fabricated from polylactic acid (PLA) with cellulose nanocrystals (PNC) extracted from pineapple leaves. The PNC was modified by incorporating 4 wt% triethoxyvinylsilane (TEVS), designated as 4PNC, to enhance its interaction with PLA. The films incorporated varying concentrations of PNC (1, 2, 4, and 8 wt%). The results indicated that higher PNC concentrations increased the water vapor permeability (WVP) and biodegradability of the composite films, while reducing light transmission. Films containing 4PNC, particularly at 4 wt% (PLA/4PNC-4), exhibited an 11.18 % increase in elongation at break compared to neat PLA films. Moreover, these films showed reduced light transmission, correlating with decreased weed growth, reduced WVP, and enhanced barrier properties, indicative of improved soil moisture retention. Additionally, PLA films with 4PNC demonstrated greater thermal degradation stability than those with unmodified PNC, suggesting enhanced heat resistance. However, there was no significant difference in aerobic biodegradation between the PLA films with PNC and those with 4PNC. This study confirms that TEVS-modified cellulose significantly enhances the properties of bio-composite films, making them more suitable for mulch film applications.

Development of Chitosan-Based Films Incorporated with Chestnut Flower Essential Oil That Possess Good Anti-Ultraviolet Radiation and Antibacterial Effects for Banana Storage

New and valuable packaging materials, with high biocompatibility and biodegradability, have garnered attention in recent years. The aim of this study was to investigate the physicochemical characterization and biological activities of chitosan (CH)-based composite films with the incorporation of chestnut flower essential oil (CFEO). The composite films were prepared by the casting method and characterized in terms of structural, morphological, and mechanical properties via FT-IR, XRD, UV, SEM, AFM, and TGA. Antibacterial properties were investigated using Staphylococcus aureus, Escherichia coli, and Calletotrichum musae. Antioxidant capabilities were measured by DPPH assay. The results proved the significantly increased water vapor permeability (WVP), heat resistance, and antibacterial and antioxidant capabilities of CH-CFEO films. The incorporation of CH and CFEO enhanced UV blocking, which made the film shield almost all UV light. Films with a tensile strength of 6.37 ± 0.41 MPa and an elongation at break of 22.57 ± 0.35% were obtained with 6 mg mL−1 of CFEO. Subsequently, banana preservation experiments also confirmed that the composite films could effectively extend shelf life through reducing weight loss. These desirable performances enable our newly developed composite films to be a remarkable packaging material to become alternatives to traditional petroleum-based food-packaging materials and solve the fresh fruit preservation dilemma.

Screening and Characterization of Antioxidant Film Applicable to Walnut Kernels from Juglans sigillata.

Walnuts play a positive role in human health due to their large amounts of unsaturated fatty acids, whereas lipid oxidation can easily occur during storage. Herein, three natural antioxidants (epicatechin, sesamol, and myricetin) were added to the composite film cross-linked with chitosan and soy protein peptide, and the antioxidant film appropriate for the preservation of walnut kernels from Juglans sigillata was screened to improve the storage quality of walnuts. The results showed that three antioxidant films could all enhance the storage performance of walnut kernels, with sesamol being the best. The characterization of antioxidant film cross-linked with chitosan and soy protein peptide containing sesamol (C/S-ses film) revealed that the composite film improved the slow release and stability of sesamol; in addition, the presence of sesamol could effectively reduce the light transmittance and water vapor permeability of the composite film, together with significantly enhancing the antioxidant and antimicrobial activities, resulting in an effective prolongation of the storage period of walnut kernels. These findings indicated that C/S-ses possess excellent potential for retarding the oxidative rancidity of unsaturated fatty acids and will provide an effective strategy for the preservation of walnut kernels.

Peppermint oil‐infused polylactic acid films: A novel approach for antimicrobial and biodegradable food packaging

AbstractExtensive research is currently dedicated to creating biodegradable packaging materials that match the qualities of traditional synthetic packaging materials. Among these options, polylactic acid (PLA) is noteworthy. PLA is a renewable‐source‐derived thermoplastic polymer with excellent barrier properties, mechanical strength, and a strong safety profile. To enhance food product shelf life, active packaging materials, incorporating functional ingredients like antimicrobials, have gained prominence. Peppermint essential oil is one such active ingredient, offering potential improvements in preserving food freshness and safety. This study's objective is to craft antimicrobial, biodegradable food packaging materials by blending peppermint oil into PLA films. Various peppermint oil concentrations (1.25%, 1.875%, and 2.5% w/v) were blended with PLA to assess their impact on opacity, water vapor permeability (WVP), mechanical and thermal properties, and antimicrobial characteristics. Higher peppermint oil concentrations increased opacity, making them advantageous for light‐sensitive food items. These films reduced WVP without affecting PLA's thermal stability. Antimicrobial effectiveness was evaluated against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), showing inhibition with 1.875% and 2.5% w/v peppermint oil concentrations. Compared to control, PLA films with peppermint oil extended the shelf life of packaged chicken breast meats from 3 to 8 days. As a result, incorporating peppermint oil into PLA films presents a promising solution for advanced antimicrobial and biodegradable food packaging.Highlights The incorporation of peppermint oil resulted in higher opacity values. Peppermint incorporated PLA films showed antimicrobial activity. Peppermint oil addition decreased water vapor permeability of PLA films. Peppermint oil added PLA films increased the shelf life of chicken meat up to 8 days.

Reduction of lipid oxidation in olive oil using gelatin-based centrifugally spun fibers loaded with caffeic acid

Centrifugal spinning is a novel method in order to produce fibers in a fast and efficient way. The objective of this study was to explore the impact of varying concentrations of caffeic acid on the attributes of gelatin-based active fibers produced through centrifugal spinning. Additionally, the study aimed to evaluate the efficacy of these fibers, employed as a packaging film, in preventing lipid oxidation in olive oils. Active gelatin films with different concentrations (control (0%), 2% and 3%) of caffeic acid were analyzed in terms of morphology, water vapor permeability, total phenolic content, antioxidant activity, encapsulation efficiency, loading capacity, Fourier Transform Infrared Spectroscopy (FTIR) and thermogravimetric analysis (TGA). Field Emission Scanning Electron Microscope (FESEM) analysis showed that the addition of caffeic acid did not disrupt the homogenous structure of fibers. Incorporation of caffeic acid affected the water vapor permeability of films, whereas the increase in caffeic acid concentration had no significant effect. The antioxidant activity of fibers increased with the rise in caffeic acid concentration. Encapsulation efficiency and loading capacity ranged between 84.30%-95.70% and 1.96%–2.91%, respectively. FTIR results showed the interaction between caffeic acid and gelatin-based fibers. As a result, caffeic acid loaded centrifugally spun fibers created an opportunity to develop active fibers for food packaging. The application of nanofibers to olive oil during accelerated storage resulted in a notable 45% reduction in total oxidation. Consequently, this study presents a promising approach employing caffeic acid-loaded centrifugally spun nanofibers to manage lipid oxidation in valuable oils.

Multifunctional Ti3C2Tx MXene-reinforced thermoplastic starch nanocomposites for sustainable packaging solutions

Starch-derived films exhibit significant potential for packaging applications owing to their low cost, biodegradable characteristics, and natural abundance. Nonetheless, there is a demand to enhance their mechanical properties and moisture resistance to broaden their use. In this study, high performing sorbitol-plasticized starch/Ti3C2Tx MXene nanocomposites, reinforced with ultra-low filler contents, were fabricated for the first time in literature. The MXene nanoplatelets were well-dispersed within the starch matrix while there was a tendency for the fillers to align in-plane, as revealed by polarized Raman spectroscopy. The produced nanocomposite films demonstrate remarkable effectiveness in blocking UV light, offering an additional valuable attribute in food packaging. The Young's modulus and tensile strength of starch films containing 0.75 wt% MXene increased from 439.9 and 11.0 MPa to 764.3 and 20.8 MPa, respectively. The introduction of 1 wt% MXene nanoplatelets reduced the water vapour permeability of starch films from 2.78 × 10−7 to 1.80 × 10−7 g/m h Pa due to the creation of highly tortuous paths for water molecules. Micromechanical theories were also implemented to understand further the reinforcing mechanisms in the biobased nanocomposites. The produced starch nanocomposites not only capitalize on the biodegradable and renewable nature of starch but also harness the unique properties of nanomaterials, paving the way for sustainable and high-performance packaging solutions that align with both consumer and environmental demands.

Investigation of physio-mechanical, antioxidant and antimicrobial properties of starch–zinc oxide nanoparticles active films reinforced with Ferula gummosa Boiss essential oil

The production of surface compounds coated with active substances has gained significant attention in recent years. This study investigated the physical, mechanical, antioxidant, and antimicrobial properties of a composite made of starch and zinc oxide nanoparticles (ZnO NPs) containing various concentrations of Ferula gummosa essential oil (0.5%, 1%, and 1.5%). The addition of ZnO NPs improved the thickness, mechanical and microbial properties, and reduced the water vapor permeability of the starch active film. The addition of F. gummosa essential oil to the starch nanocomposite decreased the water vapor permeability from 6.25 to 5.63 g mm−2 d−1 kPa−1, but this decrease was significant only at the concentration of 1.5% of essential oils (p < 0.05). Adding 1.5% of F. gummosa essential oil to starch nanocomposite led to a decrease in Tensile Strength value, while an increase in Elongation at Break values was observed. The results of the antimicrobial activity of the nanocomposite revealed that the pure starch film did not show any lack of growth zone. The addition of ZnO NPs to the starch matrix resulted in antimicrobial activity on both studied bacteria (Staphylococcus aureus and Escherichia coli). The highest antimicrobial activity was observed in the starch/ZnO NPs film containing 1.5% essential oil with an inhibition zone of 340 mm2 on S. aureus. Antioxidant activity increased significantly with increasing concentration of F. gummosa essential oil (P < 0.05). The film containing 1.5% essential oil had the highest (50.5%) antioxidant activity. Coating also improved the chemical characteristics of fish fillet. In conclusion, the starch nanocomposite containing ZnO NPs and F. gummosa essential oil has the potential to be used in the aquatic packaging industry.

Biodegradable films from the lignocellulosic fibers of wheat straw biomass and the effect of calcium ions

Plastics are hazardous to human health, and plastic waste results in environmental pollution and ecological catastrophe. Biobased polymers from renewable sources have recently become promising for developing biodegradable packaging films. Among them, lignocellulosic residue from agricultural biomass is inexpensive, renewable, and biodegradable. This study aims to develop biodegradable films using lignocellulosic residue from wheat straw biomass. The methodology is a green process that solubilizes lignocellulosic chains using Zn2+ ions and crosslinks with Ca2+ ions of different concentrations (200–800 mM). The results reveal that the increase of Ca2+ ions significantly decreases moisture content, water solubility, water vapor permeability, transparency, and elongation of films. The tensile strength is recorded as 6.61 ± 0.07 MPa with the addition of 800 mM of CaCl2, which is approximately 2.5 times higher than commercial polyethylene films. Around 90 % of films biodegrade within a month in soil containing 20 % moisture content. Overall, lignocellulosic residue from wheat straw biomass could be an excellent replacement for synthetic polymer to fabricate strong, transparent, and biodegradable plastic films.

A novel multifunctional carboxymethyl cellulose packaging film with encapsulated lemon oil for quality enhancement of cherry tomato and baby spinach leaves

This is the first report on fabricating an active edible film based on CMC and lemon essential oil (LEO) micro/nanocapsules for packaging cherry tomatoes and baby spinach leaves. LEO extracted by hydrodistillation from lemon peels was efficiently encapsulated by oil-in-water emulsification method using high dextrose equivalent maltodextrin (MD) as the sole wall material, yielding physically stable MD-LEO micro/nanocapsules with potent cytotoxicity against Caco-2 cells, and antimicrobial activity against foodborne pathogens. Incorporating LEO micro/nanocapsules into CMC confirmed by SEM/FTIR analyses, significantly improved the film's water vapor permeability by 37.50%, increased its thermal stability by 25 ℃, and reduced its moisture content/water absorption. The transparent film demonstrated strong DPPH radicle scavenging activity, UV-blocking ability, low moisture, enhanced tensile strength, and soil biodegradability (96.84%) within 14 days. Direct application of the novel film as a single-layer overwrap to cherry tomatoes and spinach leaves stored at abusive temperature for up to 4 days revealed good prospects of preserving physical appearance, preventing water/texture loss, maintaining pH, and inhibiting growth of aerobic mesophilic/E. coli O157:H7 populations by 0.65 and 1.0 log units, respectively, highlighting that CMC is an optimal vehicle for encapsulated LEO. The data emphasizes the significant contribution of the novel film to active packaging of minimally processed fresh produce and its potential to compete with inert plastic films dominating food markets. Extending the film's applicability range to other pertinent food systems may promote industrial interest for production upscaling as a commercially viable postharvest preservation strategy to meet the demands of sustainable packaging industry in Egypt.

Preparation of pullulan-shellac edible films with improved water-resistance and UV barrier properties for Chinese cherries preservation

In order to improve the water-resistance and ultraviolet (UV) barrier properties of pullulan (PL) film, edible composite films were prepared by solution casting based on PL and shellac (SH). The physical properties, thermal stability, mechanical properties, water vapor permeability and UV barrier of the composite films were characterized. The analysis of the functional properties revealed that the composite films had good compatibility, water-resistance (33.50˚–60.15˚), and strong UV-blocking properties (84.60%–0.00%). The addition of SH improved the water-resistance and mechanical properties of the films, but the thermal stability was slightly reduced. These films can be used as an edible coating on Chinese cherries. According to the characteristics of weight loss, decay incidence and other indicators of cherries, the PL-SH composite films can keep Chinese cherries fresh at room temperature at least for 7 days. Therefore, PL-SH composite films may be an environmentally friendly packaging material with application prospects in the fruit preservation industry.

Preparation and characterization of biodegradable food packaging films using lemon peel pectin and chitosan incorporated with neem leaf extract and its application on apricot fruit

The present study aims to develop and characterize biodegradable packaging films from lemon peel-derived pectin and chitosan incorporated with a bioactive extract from neem leaves. The films (PCNE) contained varying concentrations of neem leaf extract and were comprehensively assessed for their physical, optical, mechanical, and antimicrobial attributes. The thickness, moisture content, water solubility, and water vapor permeability of the biodegradable packaging films increased with the increasing concentration of neem leaf extract. Comparatively, the tensile strength of the films decreased by 42.05 % compared to the control film. The Scanning Electron Microscopy (SEM) confirmed that the resultant blended pectin-chitosan films showed a uniform structure without cracks. Furthermore, the analysis targeting Staphylococcus aureus and Aspergillus niger indicated that the films had potent antimicrobial activity. Based on these results, the optimum films were selected and subsequently applied on apricot fruits to increase their shelf life at ambient temperature. The findings, after examining factors such as colour, firmness, total soluble solids, shrinkage, weight loss, and appearance, concluded that the apricots coated by PCNE-5 had the most delayed signs of spoilage and increased their shelf life by 50 %. The results showed the potential applicability of lemon peel pectin-chitosan-neem leaf extract blend films in biodegradable food packaging.