With the wide application of petroleum resources, oil substances have polluted the environment in every link from crude oil extraction to utilization. Cement-based materials are the main materials in civil engineering, and the study of their adsorption capacity for oil pollutants can expand the scope of functional engineering applications of cement-based materials. Based on the research status of the oil-wet mechanism of different kinds of oil-absorbing materials, this paper lists the types of conventional oil-absorbing materials and introduces their application in cement-based materials while outlining the influence of different oil-absorbing materials on the oil-absorbing properties of cement-based composites. The analysis found that 10% Acronal S400F emulsion can reduce the water absorption rate of cement stone by 75% and enhance the oil-absorption rate by 62%. Adding 5% polyethylene glycol can increase the oil-water relative permeability of cement stone to 1.2. The oil-adsorption process is described by kinetic and thermodynamic equations. Two isotherm adsorption models and three adsorption kinetic models are explained, and oil-absorbing materials and adsorption models are matched. The effects of specific surface area, porosity, pore interface, material outer surface, oil-absorption strain, and pore network on the oil-absorption performance of materials are reviewed. It was found that the porosity has the greatest influence on the oil-absorbing performance. When the porosity of the oil-absorbing material increases from 72% to 91%, the oil absorption can increase to 236%. In this paper, by analyzing the research progress of factors affecting oil-absorption performance, ideas for multi-angle design of functional cement-based oil-absorbing materials can be obtained.
Read full abstract