Water Purification System Research Articles

A 3D-Printed Bionic Membrane with Autonomously Passive Unidirectional Liquid Transfer Capability for Water Condensation, Collection, and Purification.

Interfacial solar vapor generation is a promising technology for alleviating the current global water crisis, and the evaporation rate and efficiency have approached the theoretical limit. In a practical interfacial evaporation water purification system, the collection rate of purified water is typically lower than the evaporation rate. Passive collection devices based on gravity are susceptible to environmental influences and exhibit low collection efficiency, while active collection devices consuming external energy suffer from complex device systems and extra energy consumption. Given that both collection devices are nonselective and unable to distinguish contaminants mixed in the vapor, bionic membranes with autonomously passive and unidirectional water transfer capacity are developed through 3D printing for efficient water collection. More importantly, the bionic membranes are capable of high-speed water transportation without the need for external energy or gravity drive and liquid-selective transportation for separating oily pollutants from the collected products. The directional transport property facilitates the modular assembly of the bionic membrane, extending its application to practical large-scale solar-driven seawater desalination systems.

Dynamic Regulation of Hydrogen Bonding Networks and Solvation Structures for Synergistic Solar-Thermal Desalination of Seawater and Catalytic Degradation of Organic Pollutants

HighlightsA flow-bed water purification system with an asymmetric solar-thermal and catalytic membrane is designed for synergistic solar-thermal desalination of seawater/brine and catalytic degradation of organic pollutants.The hydrogen bonding networks can be regulated by the abundant surface –OH groups and the in situ generated ions and radicals during the degradation process for promoting solar-driven steam generation.The de-solvation of solvated Na+ and subsequent nucleation/growth of NaCl are effectively inhibited by SO42−/HSO5− ions.

Solar- Powered Water Purification System

Solar- Powered Water Purification System

Titanium Dioxide and Photocatalysis: A Detailed Overview of the Synthesis, Applications, Challenges, Advances and Prospects for Sustainable Development

The term “photocatalysis” has recently gained high popularity, and various products using photocatalytic functions have been commercialized. Of all the materials that may be used as photocatalysts, titanium dioxide (TiO2) is virtually the only one that is now and most likely will remain appropriate for industrial application. Water and air purification systems, sterilization, hydrogen evolution, self-cleaning surfaces, and photoelectrochemical conversion are just a few of the products and applications in the environmental and energy domains that make extensive use of TiO2 photocatalysis. This is due to the fact that TiO2 has the lowest cost, most stability, and most effective photoactivity. Furthermore, history attests to its safety for both people and the environment because it has been used as a white pigment since antiquity. This review discusses some important aspects and issues concerning different synthesis methods and their influence on the structure and properties of TiO2, as well as the concept of photocatalysis based on it as a promising biocompatible functional material that has been widely used in recent years. The advantages of TiO2 applications in various fields of science and technology are discussed, including environmental protection, photocatalysis including self-cleaning surfaces, water and air purification systems, hydrogen liberation, photovoltaic energy, cancer diagnosis and therapy, coatings and dental products, etc. Information on the structure and properties of TiO2 phases is presented, as well as modern methods of synthesizing functional materials based on it. A detailed review of the basic principles of TiO2 photocatalysis is then given, with a brief introduction to the modern concept of TiO2 photocatalysis. Recent advances in the fundamental understanding of TiO2 photocatalysis at the atomic-molecular level are highlighted, and advances in TiO2 photocatalysis from the perspective of design and engineering of new materials are discussed. The challenges and prospects of TiO2 photocatalysis are briefly discussed.

Removal of Textile Dye Using a Low‑Cost Composite Film Based on PVA-Clay: Preparation, Characterization and RSM Optimization

The use of adsorbent materials in powder form presents significant challenges for industrial wastewater treatment due to their poor regeneration after use. Our research described here aimed to prepare a low-cost and eco-friendly film with excellent regeneration capabilities for the efficient removal of Telon Orange dye (TO) from water. The film was fabricated by incorporating a natural clay, DD3, into a poly (vinyl alcohol) (PVA) matrix using the solvent casting method. The prepared film was characterized using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD) and thermal gravimetric analysis (TGA) techniques. The characterization results confirmed that the DD3 interacts and disperses within the PVA matrix. The influence of film dose and composition, pH, contact time, and initial concentration were studied in batch adsorption. Response surface methodology (RSM) using the Box-Behnken design matrix was then used to find the best conditions for dye adsorption. An ANOVA analysis approved the proposed quadratic model with a high correlation coefficients (R2 = 0.98). The F-value of the model was 46.39, indicating that the model was significant. The PVA/DD3 composite film achieved a 93.45% efficiency in removing TO dye under optimal conditions. The recyclability studies showed a removal efficiency of 90.13% after five uses of the film, making it suitable for large-scale applications and adaptable for use in water purification systems.

Optimization through response surface modelling, experimental validation on development of nanocellulose for pharmaceutical applications

Nanocellulose, a promising polymer derived from lignocellulosic sources, is utilized in various applications such as paper production, water purification, wound dressing, scaffolds, biosensors, super-disintegrants, cosmetics, and drug delivery systems. The study investigates the production of optimized nanocellulose size using response surface methodology, examining the impact of factors like sulphuric acid concentration and temperature on the acid hydrolysis process. The central composite design was used to screen and adjust the design matrix with two-factor levels. The optimized size of nanocellulose was found to be 364.1 nm, with a zeta potential of −40.6, which shows long-term stability. Hence, process variables like sulphuric acid of 48.29% v/v and temperature of 39.7 °C were optimized to get the desired particle size from commercial cellulose. An Analysis of Variance (ANOVA) was applied to determine the primary parameters that have a significant impact on the particle size of nanocellulose. Thus, the obtained nanocellulose was characterized using FTIR, XRD, DLS and TEM analysis. FTIR confirms that the functional groups of cellulose are similar in nanocellulose. As the XRD illustrates, 67% of the crystallinity index in the developed nanocellulose is semicrystalline. The particle size was found within the nm size by employing the DLS method. Nanocellulose was characterized using TEM for surface morphology. Thus, obtained nanocellulose is widely used in various pharmaceutical applications like tissue engineering, cosmeceuticals, wound healing, scaffolds, aerogels, hydrogels, and controlled release of drugs.

Spray-Deposited TiO2 Layers on Aluminum Foil for Sustainable Water Remediation

In this study, we developed TiO2-coated aluminum (TiO2/Al) surfaces using eco-friendly methods to create efficient and environmentally friendly photoactive materials with the potential to enhance water purification systems. TiO2 particles were deposited onto aluminum foil surfaces via a spray method, followed by heat treatment at 200 °C for 15 min. The morphology of the TiO2/Al surfaces, both before and after photocatalytic treatment, was characterized using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The photocatalytic properties of these modified surfaces were evaluated through the degradation of rhodamine B (RB), methylene blue (MB), and methyl orange (MO) under simulated solar and UV–LED irradiation. Among the dyes tested, MO exhibited the highest degradation, influenced by factors such as absorption maximum, molecular structure, charge, and the number of condensed rings. The computational study of interactions between dye molecules and the combined nanoparticle revealed that the binding was the strongest in the case of MO dye. This study also explored the influence of varying the number of TiO2/Al surfaces in solution (one, five, and ten) on the photodegradation efficiency. The solution with five TiO2/Al surfaces demonstrated optimal performance, achieving a 16% degradation of RB. The reusability of the TiO2/Al surfaces was confirmed through five successive runs of RB degradation. The results indicate that TiO2/Al surfaces are a promising solution for addressing water contamination challenges and advancing sustainable water treatment practices.

Removal of arsenic from aqueous solution using magnetic biochar derived from Spirulina platensis

Arsenic contamination in surface waters and groundwater affects millions of people on a daily basis. Oxidation of As(III) to less toxic As(V) is a widely used strategy to enhance the removal of As from solution. This study developed and evaluated a Fe-modified biochar (FeSP600). Spirulina platensis (SP) is one of the most promising microalgae because of its physicochemical properties and potential applications. The high N content of SP may affect the physicochemical properties of the biochar, which could be used as an inherent N source for N doping biochar by carbonization. After Fe modification, the formed Fe species and N-containing components of SP were used to introduce pyridinic N, which can be coordinated with Fe to form Fe-N. We demonstrated that the formed Fe species (Fe0, Fe2+ and Fe3+) and the defective structures in FeSP600 could act as active sites for surface catalytic reactions. FeSP600 not only had magnetic properties but also could effectively remove As from an aqueous solution. These properties were attributed to the release of Fe2+ and the reactive oxygen species (ROSs) generated by the γ-Fe2O3 particles on the crystalline defect structure. As(III) and As(V) removal were affected by the initial pH values. The removal efficiencies for As(III) increased from 57.2 % to 94.9 % as the pH increased from 3 to 9, whereas that for As(V) decreased from 80.1 % to 46.8 %. The presence of coexisting ions either completely (PO43−) or partially (Cl−, CO32− and SO42−) inhibited As removal. The removal of As(V) depended on electrostatic interactions, but As(III) removal was a complex process, including both oxidation and surface adsorption, as the ROSs were able to oxidize As(III) to As(V). Our study demonstrates that FeSP600 has properties that are beneficial for the removal of As(III) and As(V) from aqueous environments. The findings of this study have potential for real-world application in treating As-contaminated water sources, particularly in improving drinking water purification systems in developing countries. More importantly, an assessment of the impact of FeSP600 usage on aquatic ecosystems is required to ensure the safe application of this technology. Therefore, developing methods for mass production of FeSP600 is essential for the commercialization of this technology, necessitating process engineering studies in this area.

Unlocking desalination’s potential: Harnessing MXene composite for sustainable desalination

Amidst freshwater scarcity, desalination is an effective solution, elevating pure water to a paramount commodity. Researchers actively pursue cost-effective alternatives to traditional desalination methods, with solar steam-based technologies now-a-days. Herein we report the synthesis of hierarchical photothermal absorber consisting of Ti3C2Tx decorated polypropylene fiber (PPF) composite and further used for solar desalination applications. Ensuring system stability amidst temperature fluctuations, pH variations, and mechanical stresses is pivotal for optimal desalination and wastewater treatment performance. Seamless integration of components is imperative to achieve this. Structurally, the Ti3C2Tx MXene@PPF composite evaporator showcases impressive metrics, such as high evaporation rate of 4.63 kg m-2h−1 along with a remarkable solar-evaporation efficiency of 93.48 % when tested under 1 sun illumination. Moreover, the composite absorber exhibits good mechanical stability, exceptional chemical stability even under harsh conditions (such as acid and alkali environments), outstanding salt tolerance and maintained a consistent evaporation rate over extended durations. Also, the absorber achieves good mechanical properties. These findings underscore the Ti3C2Tx MXene@PPF composite evaporator’s potential as a groundbreaking material for solar steam generation, offering high efficiency and cost-effectiveness. Beyond saline water desalination, its salt-preserving attributes and filtration capabilities position it as a promising alternative for wastewater treatment. This study presents an innovative and scalable solar water purification system applicable to a diverse range of water contaminants and manufacture in a cost-effective way.

Solar Based Water Purification System

Solar Based Water Purification System

Tap water filtration and purification usage and their impact on the concentrations of fluoride and other minerals – A community-based study

ObjectiveThis study investigated the prevalence of water filtration and purification system (WFPS) use among residents of central Indiana (USA) and determined the effects of WFPS on the concentrations of fluoride, calcium, magnesium, potassium, and sodium in tap water. MethodsA census-based questionnaire collected data on demographics, water use, and water sources. Participants were also asked to provide water samples from their tap water or the WFPS they used. Water samples were analyzed using ion-specific electrodes (fluoride) and atomic absorption spectrometry (metals). Mineral concentration comparisons between water sources used nonparametric tests; questionnaire associations were testing using correlations, chi-square tests, and nonparametric tests. ResultsOne hundred and one participants completed the study, of which 71 % used some type of WFPS. Blacks were less likely to use WFPS than Asian or White participants (p = 0.045). Those with bachelor's degrees or higher were more likely to use WFPS (p = 0.003). The most used WFPS were pitcher filters (31 %), water softeners (21 %), reverse osmosis systems (11 %), faucet-mounted filters (4 %), and whole-house carbon filters (1 %). Reverse osmosis systems resulted in the lowest mineral concentrations (median, ppm; F-0.08, Ca-2.30, Mg-0.46, Na-4.60, P-0.35). Pitcher filters were largely comparable to unfiltered tap water. Water softeners resulted in the highest sodium concentrations (78.40 ppm). ConclusionA large proportion of study participants use WFPS, with pitcher filters being the most common. Reverse osmosis systems had the most significant impact on reducing mineral levels in tap water, while pitcher filters do not adversely affect mineral concentrations. Clinical SignificanceUnderstanding how different WFPS affect the various minerals in tap water is essential for helping consumers in choosing the right system and for oral care providers to guide patients on water consumption and the need for fluoride supplementation, especially for those at high risk of dental caries.

PREPARATION AND CHARACTERIZATION OF POLYMER INCLUSION MEMBRANES BASED ON BIODEGRADABLE CELLULOSE/ALGERIAN CLAY FOR HEAVY METALS REMOVAL FROM WASTEWATER

Separation membranes have gained attention as promising options for water and wastewater treatment due to their financial sustainability, and eco-friendliness. However, practical challenges have limited their application in water separation. To overcome these limitations, inorganic-organic hybrid membranes have been developed in this study. The present work deals with two attractive aspects: (i) economical, through the valorization of a local clay (Algerian kaolin), and (ii) environmental, which is based on the membrane selectivity for metal ions. The principal objective of this work is the development of enhanced nanocomposite membranes. It is achieved with low costs, based on cellulose triacetate (CTA) as a polymeric matrix modified by the addition of a lamellar filler, i.e. yellow clay obtained from Jijel, located in the east of Algeria, and plasticized by dioctyl phthalate (DOP). A further objective of this paper was the treatment of wastewater polluted by lead (Pb2+) and cadmium (Cd2+). The prepared membranes were characterized by various characterization techniques, including scanning electron microscopy (SEM), Fourier-transform infrared (FTIR) spectroscopy and thermogravimetric analysis (TGA). All synthetized membranes had an amorphous structure, with homogeneous pore morphology and distribution. Moreover, the presence of nanocomposite clay showed effective integration into the membrane matrix and led to a significant improvement in thermal resistance. These membranes were applied to treat a synthetic aqueous solution contaminated with heavy metals, namely Pb2+ and Cd2+. The results revealed a rejection rate higher than 50%, suggesting the potential effectiveness of a stable and environmentally sustainable polymer inclusion membrane system for water purification.

Consequence of Cattaneo-Christov heat and mass flux models on bioconvective flow of dusty hybrid nanofluid over a Riga plate in the presence of gyrotactic microorganisms and Stephan blowing impacts

This study investigates the impact of the Stephan blowing and Cattaneo-Christov flux model on bioconvective flow of dusty hybrid nanofluid over a Riga plate in the presence of gyrotactic microorganisms and variable dust particles volume friction. Mass and heat phenomena are explored in the context of Stefan blowing impacts. The hybrid nanofluid consists of nanoparticles of MgO and Ag base fluid water. The Cattaneo-Christov mass and heat flux model has a significant impact on the bioconvective flow. The model predicts a slower temperature distribution and a higher concentration gradient than the traditional Fick's law and Fourier's law, respectively. The occurrence of gyrotactic microorganisms enhance the flow characteristics. This model is important for optimizing mass and heat transfer in a variety of engineering systems, including heating and cooling technologies, where effective thermal control is essential. It can be used by employing the regulated migration of microbes. By maximizing the removal of impurities, it helps with the design of sophisticated water purification systems in environmental engineering. The amalgamation of gyrotactic microorganisms and Stefan blowing effects augments the comprehension of intricate fluid dynamics, maybe resulting in advancements in microfluidic apparatuses and bio-inspired technologies. In order to transform the controlling PDEs into nonlinear ODEs, a new set of non-dimensional variables is used. The MATLAB (RKF-45th) technique is then used to resolve the ODEs numerically. As the Stephan blowing parameter (0.1≤Sb≤1.9) increases, the outcomes show that the flow distributions upsurge for both the dust and fluid phases, but the dust and fluid phase thermal distributions drop.

Flexible roles of TiO2 in enhancing carrier separation for the high photocatalytic performance of water treatment under different spectrum sunlight

Construction of heterogeneous-photocatalysts is an effective mean for enhancing charge separation, however, the specific roles of the individual components have not been thoroughly explored. In this article, a heterogeneous-photocatalyst, TiO2/MoO3-x, was constructed, revealing that the two components, TiO2 and MoO3-x, play varying roles under different light spectra. Under full spectrum light, an S-scheme mechanism was achieved, which preserved the high oxidizing and reducing property of MoO3-x and TiO2, facilitating an augmented generation of reactive oxygen species (ROS). Under visible light, the MoO3-x functioned as the donor of hot electrons and the TiO2 served as the receptor platform for these electrons. The presence of the interfacial electric field enabled the transfer of hot electrons, leading to an enhanced ROS generation. Consequently, the TiO2/MoO3-x achieved high photocatalytic activity under both full spectrum and visible light. The optimized TiO2/MoO3-x catalyst demonstrated outstanding antibacterial efficacy, achieving eradication rates of 98.1 % for Staphylococcus aureus, and 99.6 % for Escherichia coli respectively. Additionally, it exhibited substantial degradation activity with a rate of 0.028 min−1 for Rhodamine B (50 mg/L). Furthermore, the TiO2/MoO3-x membrane removed approximately 81.2 % of bacteria from surface water, underscoring the potential of the designed membrane in water purification systems. This article explored the distinct roles and corresponding charge transfer mechanisms of the TiO2 and MoO3-x under full spectrum or visible light, offering innovative ideas for the design of full-spectrum photocatalysts with high efficiency. The straightforward design of membrane-based filtering device demonstrated wide applications for treating wastewater for the removal of dye and bacterial contamination.

Rational Engineering of Nanostructured NiS/GO/PVA for Efficient Photocatalytic Degradation of Organic Pollutants

A novel nanocomposite film synthesized from an inexpensive and easily accessible polymer such as poly (vinyl alcohol) (PVA), which is coated with nickel sulfide (NiS) and graphene oxide (GO), was obtained from used drinking-water bottles. The produced coated film was examined as a potential photocatalyst film for wastewater treatment promotion in a batch system for the removal of methylene blue (MB) and tetracycline (TC) antibiotics. The experimental results show that the presence of GO significantly increases the photocatalytic efficiency of NiS, and the MB and TC degradation results proved that the incorporation of GO with NiS led to a more than one-and-a-half-fold increase in the removal percentage in comparison with the NiS/PVA-coated film. After 30 min of illumination using GO/NiS/PVA-coated film, the removal efficiency reached 86% for MB and 64% for TC. The photodegradation kinetic rate followed the pseudo-first-order rate. Furthermore, the response surface methodology (RSM) model was utilized to study and optimize several operating parameters. The ideal circumstances to achieve 91% elimination of MB are 12 mg L−1 MB initial concentration, two lamps, and an illumination time of 15 min; however, to achieve 85% TC removal, 11 mg L−1 TC initial concentration, two lamps, and a 45 min illumination time should be used. The fabricated nanocomposite photocatalyst film seems to have promise for use in water purification systems.

Insights into the efficient removal and mechanism of NiFeAl-LDH with abundant hydroxyl to activate peroxymonosulfate for sulfamethoxazole wastewater

Layered double hydroxide (LDH) material with abundant OH was successfully prepared by co-precipitation method, and a water purification system of Ni2Fe0.25Al0.75-LDH activated peroxymonosulfate (PMS) was constructed to rapidly degrade sulfamethoxazole (SMX) pollutants. The optimal conditions for the degradation of SMX in the system were as follows: 0.30 g/L Ni2Fe0.25Al0.75-LDH, 0.30 mM PMS, pH = 7 and 90 % SMX was removed in 10 min and almost completely in 40 min, which was consistent with the predicted results of response surface methodology (RSM) analysis. The abundant OH in Ni2Fe0.25Al0.75-LDH could form M(O)OSO3 complexes with PMS, accelerating the generation of reactive oxygen species (ROS) and promoting the removal of SMX. Quenching experiments and electron paramagnetic resonance (EPR) spectra showed that SO4−, OH, O2− and 1O2 also existed in the system. The surface-bound SO4− and O2− contributed greatly to the removal of SMX and the electron transfer between metals was also conducive to the production of active substances. The possible degradation pathways and intermediates of SMX were proposed. The toxicity assessment software tool (T.E.S.T) and total organic carbon (TOC) results indicated that the Ni2Fe0.25Al0.75-LDH/PMS system could reduce the overall environmental risk of SMX to some extent. This study provided a new strategy for the practical application of heterogeneous catalysts in sewage treatment.

Re-designing nano-silver technology exploiting one-pot hydroxyethyl cellulose-driven green synthesis.

Re-designing existing nano-silver technologies to optimize efficacy and sustainability has a tangible impact on preventing infections and limiting the spread of pathogenic microorganisms. Advancements in manufacturing processes could lead to more cost-effective and scalable production methods, making nano-silver-based antimicrobial products more accessible in various applications, such as medical devices, textiles, and water purification systems. In this paper, we present a new, versatile, and eco-friendly one-pot process for preparing silver nanoparticles (AgNPs) at room temperature by using a quaternary ammonium salt of hydroxyethyl cellulose (HEC), a green ingredient, acting as a capping and reducing agent. The resulting nano-hybrid phase, AgHEC, consists of AgNPs embedded into a hydrogel matrix with a tunable viscosity depending on the conversion grade, from ions to nanoparticles, and on the pH. To investigate the synthesis kinetics, we monitored the reaction progress within the first 24h by analyzing the obtained NPs in terms of particle size (dynamic light scattering (DLS), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM)), Z-potential (ELS), surface plasmon resonance (UV-VIS), crystallographic phase (XRD), viscosity, and reaction yield (inductively coupled plasma-optical emission spectrometry (ICP-OES)). To explore the design space associated with AgHEC synthesis, we prepared a set of sample variants by changing two independent key parameters that affect nucleation and growth steps, thereby impacting the physicochemical properties and the investigated antimicrobial activity. One of the identified design alternatives pointed out an improved antimicrobial activity in the suspension, which was confirmed after application as a coating on nonwoven cellulose fabrics. This enhancement was attributed to a lower particle size distribution and a positive synergistic effect with the HEC matrix.

Evaluation of turbidity removal efficiency from Karun river water using polyaluminum chloride and chitosan

This study was conducted with the aim of evaluation of turbidity removal efficiency from Karun river water using polyaluminum chloride and chitosan. Chitosan is a linear cationic polyelectrolyte with high positive electron charge (one positive charge per glucose amine unit). Chitosan is used in water purification systems as coagulant along with common coagulants (alum, chlorferric). This biopolymer is also used as a primary coagulant. Chitosan has a higher ability to coagulate colloidal particles than synthetic polyelectrolytes, most of which lack the property of biological degradation in the short term, and some of them cause carcinogenesis and genetic mutation in humans. Therefore, the use of chitosan is preferable to artificial polyelectrolytes from an environmental point of view. This research was conducted on the laboratory scale using a jar test device at the water treatment plant in Ahvaz. In this study, various parameters such as pH, polyaluminum chloride concentration and chitosan concentration were present as variables. After preparing the samples and just before starting jar tests, in the rapid mixing cycle of 200 rounds per minute, the optimal pH to remove the turbidity obtained 8. Also, the optimal dosages of polyaluminum chloride and chitosan were selected as 4 ppm and 0.04 ppm, respectively. Also the main mechanism for destabilizing clots and removing turbidity was bridging between the particles. In this condition, the removal of turbidity showed the highest efficiency. On the other hand, chitosan created clots with a higher weight and, as a result, better settling ability. Therefore, chitosan was a suitable choice to remove turbidity from water.

Assessment of Theoretical and Test Performance Considerations of Concentrated Solar Water Purification System “Parabosol” in Underserved Regions

Water is a fundamental human right and a prerequisite for sustainable development because it is an essential element of existence. Notwithstanding, a huge part of the world’s population continues to face challenges in accessing clean and safe drinking water. This situation is particularly pronounced in arid and underdeveloped regions where there is a global water crisis that is a huge threat to human health, economic development, and environmental stability. Designed with solar energy, the award-winning “Parabosol” enhances water evaporation and purifies it simultaneously. Parabosol does not require any expensive machines or complicated infrastructural frameworks, making it both cost-effective and efficient for such vulnerable communities. Transporting it easily allows for quick deployment in remote areas during emergencies, ensuring a clean, dependable water supply for basic household use. This innovative measure, which reduces the risk of waterborne diseases and increases access to safe water resources within communities, could greatly contribute to public health promotion efforts. It is intended for daily performance that corresponds to the minimum needs of one family unit (no less than 35 L per person). The processing capacity of each station varies between 120 and 180 L of water per day (depending on geographical and environmental conditions), depending on geographical and meteorological (solar radiation values) factors. However, experimental values are around 250 L. Parabosol illustrates a novel model with its distinctive design and functionality, highlighting the critical role of clean energy in the development of a more sustainable and resilient future. Additionally, unlike macrosystems that require a substantial initial investment and ongoing operating costs, Parabosol is a portable solution that has the potential to address the issue of clean water scarcity in the future.

Development of Point of Use Household Water Purification SystemUsing Locally Sourced Clay Material

Access to clean and safe drinking water remains a critical challenge, particularly in low- and middle-income countries. This study focused on the development of a point-of-use household water purification system utilizing locally sourced clay material. The clay, collected from Imiegba in Edo State, Nigeria, was molded into ceramic filters and fired to create a porous structure essential for filtration. The system's effectiveness was evaluated by testing water from the Omouku River before and after filtration, with analyses conducted for physicochemical parameters, heavy metals, and microbial contaminants. Results indicated significant improvements in water quality, including the complete elimination of heterotrophic bacteria and reductions in heavy metal concentrations. The study underscores the potential of locally available materials in providing a sustainable and affordable solution for improving access to safe drinking water in regions with limited resources. Recommendations include regular monitoring, community education, and further research to optimize the filtration system's performance.