Water Production Research Articles

Arduino performance in control systems for converting air-to-water

Humans are unable to function without water. Water is therefore necessary for living. This study will address the advantages of converting air into drinkable water based on this premise. Regarding the condensation process itself, it is not the best option to use it in remote locations because it needs a lot of energy and equipment. Consequently, thermoelectric technology was used in this study to replace the condensation process. This tool's easier thermoelectric operation makes it suitable for usage in remote locations. The design of an effective Arduino program control system should take into account the effects of temperature and humidity condition parameters on the environment to maximize water production. This will allow the performance between supporting sensors and the main components to be automatically optimized under a variety of environmental conditions and produce water without wasting excessive energy. As a result, the trial where the average temperature was 30°C and the average humidity was 81% produced the highest results for the researchers when they calculated the environmental condition factors that were already known. Within the hour-long study session, 6 milliliters of water were created. In addition to the efficiency with which the Arduino program is commanded, from all sensors to the primary thermoelectric components, it can execute commands automatically and optimally. It can also resolve issues that affect the air-to-water converter controller's performance in a way that ensures proper operation of all controllers by taking into account the relevant factors. to the fullest without squandering too much energy

Climatic and edaphic controls of root-tip production and mortality in five temperate tree species

Root tips are the main components of absorptive fine roots, but their seasonal dynamics and relationship to environmental factors remain unclear due to the difficulties in methodology. In this study, we explored the temporal patterns of root-tip production and mortality in monoculture plantations of five temperate tree species at a common site in northeastern China, and identified the general environmental controls on such processes. We made monthly in-situ assessments of root tip length (RTL) production and mortality in two hardwood and three coniferous species with a minirhizotron (MR) method during the growing seasons of 2008 and 2009. Air temperature, rainfall, soil temperature and water content at 10 cm depth were determined concurrently. RTL production in all species exhibited consistent peaks in summer (June–August) in two growing seasons. RTL mortality showed substantial interannual and interspecific variability, with peaks in autumn and winter in 2008, but various patterns in 2009. RTL production positively correlated with monthly soil and air temperature across all species, and with monthly rainfall in three coniferous species. However, there was no significant correlation between RTL production and soil water content. By contrast, RTL mortality was weakly related to environmental factors, showing positive correlations with soil temperature in Korean spruce, and with rainfall in Korean pine and Korean spruce. Our findings suggest that the seasonal patterns of RTL production are convergent across the five temperate tree species due to the overlapped distribution of heat and rainfall, which can conduce roots to maximizing the acquisition of nutrient resources in the soil.

Wastewater desalination for irrigation in inland regions

ABSTRACT Desalination using membrane processes is increasingly being implemented in coastal regions of the world to meet the water needs of the growing population. The use of this water treatment option to meet the growing water needs in inland regions, however, is impeded by the cost and regulatory challenges associated with responsible disposal of the concentrate brine. For inland regions of Australia, the use of evaporation ponds (EPs) is the only available brine management option. The high cost associated with construction and the high land requirements for EPs necessitates low waste brine volume production. This desktop study investigated the feasibility of achieving very high water recoveries and very low waste brine volumes in the reverse osmosis desalination of municipal wastewater for irrigation of crops near the inland town of Horsham, Victoria, Australia. Interstage lime and soda ash softening was selected as the means of removal of the scalants that prevent the achievement of high water recovery. It is hoped that this study will provide valuable information to aid in the planning of water reclamation operations for agricultural applications in inland areas at a time of increasing demand for water for food production and forecasts of population growth and climate change.

Effect of Isotropic and Anisotropic Permeability on Gas Production Behavior of Site NGHP-01-10D in Krishna-Godavari Basin

This study reports an investigation into both isotropic and anisotropic permeability effects on gas production behavior during depressurization-induced natural gas hydrate dissociation at site NGHP-01-10D in the Krishna-Godavari basin. Numerical simulations were performed on a reservoir-scale model incorporating a single vertical well, examining different scenarios of permeability ratios (rrz). The investigation assessed gas and water production rates, cumulative production volumes, the gas-to-water ratio, and the spatial distribution of reservoir parameters throughout a production duration of 3 years. The findings indicate that permeability anisotropy has a substantial impact on hydrate dissociation and gas recovery. For rrz > 1, horizontal pressure propagation was promoted and gas production increased. For example, at t = 1100 days, the total gas production improved from 7.88 × 105 ST m3 for rrz = 1 to 55.9 × 105 ST m3 for rrz = 10. For rrz < 1, vertical pressure propagation resulted in higher water production with concomitantly lower rates of gas production rates. Spatial distribution analysis revealed that higher rrz values led to more extensive radial propagation of pressure drop, temperature decrease, gas saturation increase, and hydrate dissociation. The study concludes that higher horizontal permeability enhances depressurization effects, resulting in higher gas production rates and more favorable gas-to-water ratios.

Impact of heat stress on poultry production: Feed intake, water homeostasis, gut integrity, and meat quality

Heat stress (HS) is a major challenge to the poultry industry, especially as global temperatures continue to rise due to climate change. Heat stress has a negative effect on poultry by disrupting production sustainability, water homeostasis, gut integrity, and meat quality, leading to economic losses and welfare concerns. This review consolidates current research on these issues and explores potential strategies to mitigate the adverse effects of HS. Nutritional interventions, environmental modifications, e.g., ventilation systems and cooling techniques, as well as genetic approaches are discussed as promising solutions to improve poultry resilience to HS. Moreover, this article emphasizes the importance of adopting sustainable and innovative practices to enhance poultry farming’s long-term viability, ensuring that production systems remain both efficient and environmentally friendly. As climate change continues to intensify, the development of holistic and effective solutions becomes critical to support the global poultry industry and meet the growing demand for high-quality protein sources in a sustainable manner.

A rapid-convergent particle swarm optimization approach for multiscale design of high-permeance seawater reverse osmosis systems

Directly solving sophisticated partial differential equation constrained optimization problems is not only extremely time-consuming, but also very hard to find unique optimal solutions. Here, we propose stable and efficient surrogate models for seawater reverse osmosis desalination processes that enable thorough quantitative description of hydrodynamics and local transport characteristics in narrow flow channels. Without iteratively solving complex multi-physics simulation problem taking several hours, the proposed multi-scale design optimization framework significantly reduces the problem complexity by computing the surrogate models in seconds. Moreover, a fast-converging active subspace particle swarm optimization framework is proposed to address the optimal design problem. Compared to the standard particle swarm optimization algorithm, the proposed method enhances the average optimum by 14% and the standard deviation of optimum results for multiple runs is reduced by no less than ten times. The optimized desalination system achieves 9% reduction on energy consumption and 30% improvement on water production efficiency.

Influence of the Wind Generator and Thermal Electrical Modules in the Solar Still in the Continuous Production of Fresh Water

Influence of the Wind Generator and Thermal Electrical Modules in the Solar Still in the Continuous Production of Fresh Water

Bottled or Tap Water? Factors Explaining Consumption and Measures to Promote Tap Water

The production and consumption of plastic bottled water have several negative environmental impacts worldwide. To identify the barriers and motivations for drinking tap and bottled water, we conducted a nationally representative questionnaire survey among 3411 respondents in the Czech Republic in 2022. People aged 18–34 are moderate consumers of bottled water and very frequent consumers of tap water. Bottled water consumption tends to be less frequent among people with a higher education, while tap water consumption is less frequent among people with lower incomes. The most important factors that explain the frequency of drinking bottled and tap water are taste perception, health concerns and habit. Health concerns about tap water and the unpleasant taste of tap water increase the consumption of bottled water. People with a strong habit of drinking tap water are less likely to consume bottled water. The constructs from the theory of planned behaviour were statistically significant. The results can guide decision-makers in promoting tap water to consumers. To encourage tap water drinking, we suggest measures to increase the availability of tap water in public places in conjunction with campaigns targeting the taste and health perception, as well as the habit, of drinking tap water.

The Israeli Water Policy and Its Challenges During Times of Emergency

In a time of growing climate crisis, and despite the global warming trend, Israeli citizens routinely enjoy a regular constant supply of clean fresh water thanks to local desalination plants. Establishment of the desalination plants has become a model of water management for many countries in an era of growing climate crisis. At the same time, Israel’s water sector is faced with challenges and threats related to earthquakes, various states of warfare, and security confrontations. In such times of emergency, Israel’s water sector is particularly vulnerable to disruptions of the water infrastructure and its adequate operation by both contamination of the water sources and damage to the desalination plants. This study examines the challenges of the Israeli water sector that require it to contend with these emergency situations in an era of reliance on desalination plants. The research findings lead to the conclusion that public policy on managing the water sector, manifested in the development and establishment of water desalination plants, has resolved Israel’s water crisis, put an end to its dependency on the amount of precipitation and on natural water sources, and allowed for an increase in water production to match the rise in consumption. Nonetheless, as successful as this public policy may be, it does not consider the possibility of extreme scenarios and does not develop the entire range of steps necessary to confront them, and thus it undermines the ability of the Israeli water sector to provide its citizens with water in times of emergency.

Numerical Estimation of Potable Water Production for Single-Slope Solar Stills in the Caspian Region

This study provides a detailed numerical assessment of the productivity of single-slope solar stills across key cities in the Caspian region, including Aktau, Atyrau, Astrakhan, Makhachkala, Baku, Tehran, and Turkmenbashi. Employing a mathematical model based on heat balance equations and the Fourth Order Runge–Kutta method, we simulated the distillation process under various climatic conditions. The results reveal that productivity is significantly influenced by geographic location and local meteorological conditions. Tehran demonstrated the highest productivity across all seasons, with values of 1.75 × 103 kg/(m2·year) and an efficiency of 0.53, due to its optimal solar irradiation and ambient temperature. In contrast, Atyrau and Makhachkala exhibited lower productivity, particularly in colder months, highlighting the effect of ambient temperature on solar still efficiency. The analysis identified the optimal water depth at 2 cm and insulation thickness between 4 and 9 cm for enhancing productivity in continental climates like Aktau. Additionally, the lowest cost of distilled water was USD 0.024 per kilogram in Baku. These findings align with the existing literature, validating the numerical model’s accuracy. Future research will explore integrating solar stills with other renewable and fossil fuel-based technologies.

Identification and Evaluation of Synergy Between Carbon Emissions and Air Pollutants in Inter-Industrial Trade Among Provinces in China

With the vigorous promotion in China of efforts to reduce pollution and carbon emissions, examining their synergies becomes increasingly crucial. This study used the multi-regional input–output (MRIO) table to build the consumption-based industrial emissions inventories of CO2 and three major air pollutants (PM2.5, NOx, and SO2) and constructed synergistic emission indices of the intensity and magnitude to identify and evaluate the synergy between carbon emissions and air pollutants in inter-industrial trade among 30 provinces in mainland China. The results show that more than 85% and 40% of inter-provincial and inter-industrial trades have synergistic emissions between CO2 and air pollutants, respectively. We identified 77 inter-provincial trades and 84 inter-industrial trades among provinces with strong synergistic emissions. They are mainly reflected in the demand of the construction industry in Zhejiang and Guangdong for the nonmetal mineral products manufacturing industry in Henan, and the metal smelting and processing industry in Hebei, along with the demand of the service industry in Beijing for the electric power, steam, and hot water production and supply industry in Inner Mongolia. Our study provides new insights into the synergistic reduction of CO2 and air pollutants within the supply chain, thereby enriching the discourse on regional and industrial synergies in achieving sustainable development goals.

Enhancing the sustainability of cowpea production through the integrated use of fish effluents and animal manure

AbstractThe integration of aquaculture and agriculture in arid and semi‐arid environments is crucial for maximizing water and land productivity, especially considering the increasing global water scarcity and the simultaneous use of water for crop and fish production. A greenhouse study was conducted to determine the effects of fish effluent on the growth, yield parameters, and yield of cowpea (Vigna unguiculata). The experiment involved 13 fertilization treatments, including three types of irrigation water (river water—control, Nile tilapia (Oreochromis niloticus), African sharp‐toothed catfish (Clarias gariepinus), four fertilizers (poultry, cattle, and sheep manures at 10 t ha−1), recommended rate of inorganic fertilizer (150 kg ha−1 of NPK 6‐20‐10), and six mixed treatments with fish effluent and 50% of the applied rate of manure alone (5 t ha−1). The combined use of C. gariepinus effluent + 50% poultry manure significantly increased stem diameter, nodules per plant, pods per plant, and seed yield compared to NPK treatments. The shortest days to reach 50% flowering were obtained with the effluent of O. niloticus + 50% sheep manure, C. gariepinus/O. niloticus + 50% poultry manure, and 10 t ha−1 poultry manure. However, fertilization treatments did not significantly influence the number of branches, pod and root length, number of pods per plant, 100‐seed weight, and leaf chlorophyll concentrations. This study suggests that fish effluents, when combined with manure, can improve plant growth and seed yield, providing a cost‐effective alternative to inorganic fertilizers for smallholder farmers.

Cashew Clones Water Productivity and Production Responses to Different Biochar Levels

Cashew Clones Water Productivity and Production Responses to Different Biochar Levels

Physics-based prediction of moisture-capture properties of hydrogels

Moisture-capturing materials can enable potentially game-changing energy-water technologies such as atmospheric water production, heat storage, and passive cooling. Hydrogel composites recently emerged as outstanding moisture-capturing materials due to their low cost, high affinity for humidity, and design versatility. Despite extensive efforts to experimentally explore the large design space of hydrogels for high-performance moisture capture, there is a critical knowledge gap on our understanding behind the moisture-capture properties of these materials. This missing understanding hinders the fast development of novel hydrogels, material performance enhancements, and device-level optimization. In this work, we combine synthesis and characterization of hydrogel-salt composites to develop and validate a theoretical description that bridges this knowledge gap. Starting from a thermodynamic description of hydrogel-salt composites, we develop models that accurately capture experimentally measured moisture uptakes and sorption enthalpies. We also develop mass transport models that precisely reproduce the dynamic absorption and desorption of moisture into hydrogel-salt composites. Altogether, these results demonstrate the main variables that dominate moisture-capturing properties, showing a negligible role of the polymer in the material performance under all considered cases. Our insights guide the synthesis of next-generation humidity-capturing hydrogels and enable their system-level optimization in ways previously unattainable for critical water-energy applications.

Perforation design coupled with heterogeneity during underground hydrogen storage in steeply dipping anticline aquifers

Hydrogen has been recognized as a crucial energy carrier to reduce greenhouse gas emissions. However, as it is not always possible to meet current energy demands, underground hydrogen storage (UHS) is required for energy supply and consumption. UHS is an emerging field of study with limited investigations regarding structural conditions and wellbore perforation design in steeply dipping anticline aquifers. This study investigates different perforation schemes with respect to UHS within steeply dipping anticline aquifers to find the most suitable injection/production design while examining small-scale reservoir heterogeneities. Several UHS improvement techniques are evaluated, including water and CO2 injection through flank wells during hydrogen production. The results indicate that the highest hydrogen production is achieved with a fully perforated H2 well located at the crest as it provides the maximum contact between the hydrogen and aquifer layers during H2 injection/production. In contrast, hydrogen production is diminished with increased heterogeneity, as higher heterogeneities raise the chance of H2 being trapped. To enhance UHS performance, first H2 initialization before UHS beginning was evaluated but the results showed that it does not enhance UHS performance in a steeply dipped anticline aquifers, as effectively as it does in gas reservoirs. Water injection from flank wells during H2 production cycles showed improvement in hydrogen withdrawal, while water production experienced a slight increase. CO2 injection from flank wells was evaluated to effectively increase H2 recovery as a cushion gas and to maintain hydrogen purity during production. According to results, hydrogen purity was not affected only in high heterogeneity, since more hydrogen gets trapped in the small-scale high heterogeneity level, which prevents the mixing zone from reaching the H2 well during production. While the method prevents hydrogen contamination in anticline aquifers due to the high dip angle coupled with high heterogeneity levels, it leads to a lower hydrogen recovery.

Evidence of Microbial Activity in Coal Seam Production Water and Hydrochemical Constraints

Evidence of Microbial Activity in Coal Seam Production Water and Hydrochemical Constraints

Carbon Ink Enhanced Calcium Alginate-Based Hydrogel with Response Surface Methodology Optimized for Solar-Driven Salt-Tolerant Desalination.

The global shortage of freshwater resources is becoming more and more serious; therefore, it is necessary to obtain freshwater by desalinating seawater resources. Solar-driven interfacial photothermal evaporation, which is an environmentally friendly and energy-efficient technology, has been used to desalinate seawater for water purification and production. Herein, the IPCA hydrogel with abundant pores consisting of carbon ink as a photothermal conversion material and PU sponge loaded with calcium alginate as a water transport medium was successfully prepared and used to obtain portable water. The parameters of the synthesized IPCA are optimized by Response Surface Methodology analysis, and it was found that the IPCA exhibits a high evaporation efficiency of 3.779 kg m-2 h-1 and up to 95.98% of photothermal conversion capacity under one solar intensity. It maintains a high evaporation efficiency and salt resistance after 10 cycles of evaporation in actual seawater. Moreover, IPCA shows a high removal of various organic dye pollutants in wastewater. The results suggest a new approach for the preparation of simple, efficient, and green solar evaporators in practical application.

Techno-economic process design of multi-stage flash- reverse osmosis for water and power production using solar-wind resources

This paper introduces a newly developed hybrid power plant design that combines renewable energy sources to produce both electricity and freshwater. The design offers a higher gain output ratio (GOR) and improved efficiency in power and freshwater production, all at a lower cost compared to existing research papers. To generate power, the power plant incorporates a range of technologies, such as a horizontal-axis wind turbine (WT), photovoltaic panels (PV), parabolic trough collectors (PTC), a steam Rankine cycle, a multi-stage flash (MSF) desalination unit that cleverly harnesses excess heat from the Steam Rankine cycle, and an Reverse osmosis (RO) unit. With the assistance of ASPEN Plus, ASPEN Economic, and HOMER PRO software, the process parameters undergo significant improvement. According to the results, the power plant has the capacity to generate 57.63 MW of electricity and produce 2505 m3h of freshwater. Additionally, it has a GOR of 9.09 and utilizes 7285 m3h of seawater, which has a renewability factor of 97.6 %. In addition, the efficiency of the steam Rankine cycle stands at 32 %, providing notable energy savings. The production costs for electricity and freshwater are 0.037 $kW and 1.38 $m3, respectively, indicating their affordability. The economic analysis reveals promising results for the project, with an anticipated annual profit of 41 % and a relatively short capital payback period of 2.4 years. By implementing the proposed hybrid cogeneration power plant, the region can tackle its water and energy scarcity issues with a sustainable and long-lasting solution.

Advances in bimetallic metal organic frameworks (BMOFs) based photocatalytic materials for energy production and waste water treatment

Advances in bimetallic metal organic frameworks (BMOFs) based photocatalytic materials for energy production and waste water treatment

Microbial fuel cells: A potent and sustainable solution for heavy metal removal

The global water pollution problem is becoming increasingly crucial. One of the major contributors to water pollution is the presence of heavy metals. Heavy metals pose significant threat to both humans and all ecosystems. Various factors influence the removal of heavy metals from wastewater, including pH, temperature, natural organic matter (NOM), and ionic strength, which vary based on the chemical properties of the pollutants. More effective and modern approaches receive attention and extensively researched to substitute traditional methods such as adsorption, membrane filtration, and chemical-based separation. Among these methods, Microbial fuel cells (MFCs) are particularly intriguing. This review article focuses on MFCs and their potential applications in various fields, including clean water production. MFCs represent an innovative technology that not only generates electricity, but also demonstrates significant potential for heavy metal removal from wastewater. Cathodic chamber of MFCs effectively reduces heavy metals, while organic substrates act as carbon and electron donors in the anodic chamber. Through various mechanisms, including direct and indirect metal reduction, biofilm formation (metal sequestering), electron shuttling, and synergistic interactions among microbial communities, microorganisms exhibit remarkable efficiency in removing metals. Studies showed that dual- and single-chamber MFCs could efficiently remove a range of heavy metals, including chromium, cobalt, copper, vanadium, mercury, gold, selenium, lead, magnesium, manganese, zinc, and sodium, while simultaneously generating electricity, achieving high removal efficiencies ranging from 25% to 99.95%. This range of efficiency varies depending on the specific contaminant being targeted, the concentration of the contaminant, as well as the operating conditions such as pH and temperature. Moreover, MFCs demonstrated a wide range of power outputs, typically ranging from 0.15 W/m² to 6.58 W/m², depending on the specific configuration and conditions. These findings underscore the potential of MFCs as a sustainable and efficient approach for both wastewater treatment and energy generation.