Water Plumbing Systems Research Articles

Analysis of Water Conservation Management and Plumbing Systems at the Stiba Makassar Campus

Analysis of Water Conservation Management and Plumbing Systems at the Stiba Makassar Campus

Prevalence of Legionella in a Public Building Water Plumbing System During COVID-19 Lockdown.

Although water stagnation is widely accepted as an essential factor supporting Legionella growth in plumbing systems and "water flashing" has become a common action for water quality control, additional monitoring data in practical spaces are still needed to back up this recommendation. The lockdown of public buildings during the COVID-19 pandemic provided an ideal time window to collect such data on a large scale. This study investigated how the long-term lockdown of a public building and the subsequent water stagnation impact water quality and the population of Legionella in water. From June 2020 to May 2021, 192 water samples were collected from a public building during the lockdown and reopening due to the COVID-19 pandemic. Each water sample was assessed for common physicochemical characteristics. Concentrations of Legionella and three species of free-living amoeba (FLA) (Acanthamoeba spp., Naegleria fowleri, and Hartmannella vermiformis) were monitored by qPCR. The data suggest that long-term stagnation promotes the population of Legionella spp., Acanthamoeba spp., and N. fowleri. Notable associations were observed between Legionella and FLA. These relationships were impacted by stagnation. These results provide important evidence that can inform future water quality management actions to minimize the risk of Legionella outbreaks by avoiding the occurrence of water stagnation.

Shotgun Metagenomics Reveals Impacts of Copper and Water Heater Anodes on Pathogens and Microbiomes in Hot Water Plumbing Systems.

Hot water building plumbing systems are vulnerable to the proliferation of opportunistic pathogens (OPs), including Legionella pneumophila and Mycobacterium avium. Implementation of copper as a disinfectant could help reduce OPs, but a mechanistic understanding of the effects on the microbial community under real-world plumbing conditions is lacking. Here, we carried out a controlled pilot-scale study of hot water systems and applied shotgun metagenomic sequencing to examine the effects of copper dose (0-2 mg/L), orthophosphate corrosion control agent, and water heater anode materials (aluminum vs magnesium vs powered anode) on the bulk water and biofilm microbiome composition. Metagenomic analysis revealed that, even though a copper dose of 1.2 mg/L was required to reduce Legionella and Mycobacterium numbers, lower doses (e.g., ≤0.6 mg/L) measurably impacted the broader microbial community, indicating that the OP strains colonizing these systems were highly copper tolerant. Orthophosphate addition reduced bioavailability of copper, both to OPs and to the broader microbiome. Functional gene analysis indicated that both membrane damage and interruption of nucleic acid replication are likely at play in copper inactivation mechanisms. This study identifies key factors (e.g., orthophosphate, copper resistance, and anode materials) that can confound the efficacy of copper for controlling OPs in hot water plumbing.

Legionella in drinking water: the detection method matters.

Legionella concentrations in drinking water have been regulated for decades and are evaluated with regard to their concentrations in drinking water plumbing systems (DWPS). The respective action levels differ at the international level. In Germany, the Federal Environment Agency (UBA) specifies the application of ISO 11731 for the detection of legionella in drinking water and gives a binding recommendation for the methods to be used for culturing and evaluation. Effective from 01 March 2019, the UBA recommendation was revised. The utilized culture media in the culture approach were altered, consequently affecting the spectrum of legionella colonies detected in drinking water. Using data from a routine legionella monitoring of a large laboratory, over a period of 6 years and 17,270 individual drinking water samples, allowed us to assess the impact of the alteration on the assessment of DWPS. By comparing the amount of action level exceedances before and after the method change, it could be demonstrated that exceedances are reported significantly more often under the new method. Consequently, the corresponding action level for evaluation of legionella contamination and the resulting risk to human health needs to be revised to avoid the misleading impression of increased health risk.

Pilot-scale assessment reveals effects of anode type and orthophosphate in governing antimicrobial capacity of copper for Legionella pneumophila control

Copper (Cu) is sometimes applied as an antimicrobial for controlling Legionella in hot water plumbing systems, but its efficacy is inconsistent. Here we examined the effects of Cu (0 - 2 mg/L), orthophosphate corrosion inhibitor (0 or 3 mg/L as phosphate), and water heater anodes (aluminum, magnesium, and powered anodes) on both bulk water and biofilm-associated L. pneumophila in pilot-scale water heater systems. Soluble, but not total, Cu was a good predictor of antimicrobial capacity of Cu. Even after months of exposure to very high Cu levels (>1.2 mg/L) and low pH (<7), which increases solubility and enhances bioavailability of Cu, culturable L. pneumophila was only reduced by ∼1-log. Cu antimicrobial capacity was shown to be limited by various factors, including binding of Cu ions by aluminum hydroxide precipitates released from corrosion of aluminum anodes, higher pH due to magnesium anode corrosion, and high Cu tolerance of the outbreak-associated L. pneumophila strain that was inoculated into the systems. L. pneumophila numbers were also higher in several instances when Cu was dosed together with orthophosphate (e.g., with an Al anode), revealing at least one scenario where high levels of total Cu appeared to stimulate Legionella. The controlled, pilot-scale nature of this study provides new understanding of the limitations of Cu as an antimicrobial in real-world plumbing systems.

Impact of the surface aging of potable water plastic pipes on their lead deposition characteristics

The use of plastic potable water pipes to replace corroded metallic plumbing and construct new potable water plumbing systems is rapidly increasing due to the low cost, noncorrosive characteristics, and easy installation of plastic water pipes.

Density-dependent microbial calcium carbonate precipitation by drinking water bacteria via amino acid metabolism and biosorption

Drinking water plumbing systems appear to be a unique environment for microorganisms as they contain few nutrients but a high mineral concentration. Interactions between mineral content and bacteria, such as microbial calcium carbonate precipitation (MCP) however, has not yet attracted too much attention in drinking water sector. This study aims to carefully examine MCP behavior of two drinking water bacteria species, which may potentially link scaling and biofouling processes in drinking water distribution systems. Evidence from cell density evolution, chemical parameters, and microscopy suggest that drinking water isolates can mediate CaCO3 precipitation through previously overlooked MCP mechanisms like ammonification or biosorption. The results also illustrate the active control of bacteria on the MCP process, as the calcium starts to concentrate onto cell surfaces only after reaching a certain cell density, even though the cell surfaces are shown to be the ideal location for the CaCO3 nucleation.

Using Compliance Data to Understand Uncertainty in Drinking Water Lead Levels in Southwestern Pennsylvania.

The historical use of lead in potable water plumbing systems has caused significant public health challenges. The Lead and Copper Rule requires utilities to take action if the 90th percentile lead concentration exceeds the action level (AL) of 15 ppb. Assessment of the AL is based on a sample of homes representing a relatively small fraction of connections. Due to the intentional nonrepresentative sampling approach, the full set of conditions influencing lead concentrations in a large distribution system may be poorly characterized. Further, there is uncertainty in assessing statistical parameters such as the 90th percentile concentration. This work demonstrates methods to compute the uncertainty in the 90th percentile statistic and assesses the associated effect on compliance outcomes. The method is demonstrated on four utilities in southwest Pennsylvania (referred to as A, B, C, and D). For Utility A, evaluation of the 90th percentile showed an increase over time in observed and estimated values and the value's uncertainty. This type of change in the uncertainty might have served as an early warning of the exceedance that followed. This could have triggered more timely review of operational changes in order to avoid the effects of noncompliance on utility costs and consumer confidence.

English

Water supports life at microscopic and macroscopic levels. Good quality water is essential to economic and social growth of a community and a nation at large. Bangwe township in Blantyre is one of the closest townships to the city and provides a reliable workforce and supply of consumables to the city. Due to its overcrowding, there are a lot of issues to do with illnesses that arise from contamination of portable water. They have water resource points that they share communally, apart from others that have their own individual source points. This work aimed at assessing the quality of the most communally shared water points in Lilaka, Mvula, Chikunda, Namiyango and Ntopwa 2 areas of the township. Three major water source points (tap water kiosks, boreholes and water wells) from each community were selected for the study and samples from these sources were analyzed for conductivity, pH levels, total dissolved solids, total suspended solids, turbidity, fecal coliforms, lead and iron. The results showed that the water from these communal water source points are highly contaminated with a F. coliform maximum record of 350.00±0.03 cfu/100 ml in Chikunda area and of not pleasant organoleptic characteristics which risk the health of the consumers. This work recommends that authorities should plan to intensify monitoring of water from these sources, inspections and preventive maintenance of boreholes and tap water plumbing systems to check the quality and safety of the water and replace any damaged systems or parts thereof. Key words: Water quality, water safety, contamination, water points, portable water.

Development of a dose-response model for Naegleria fowleri.

This study develops novel dose-response models for Naegleria fowleri from selected peer-reviewed experiments on the virulence based on the intranasal exposure pathway. One data set measured the response of mice intranasally inoculated with the amebae and the other study addressed the response of mice swimming in N. fowleri infected water. The measured response for both studies was death. All experimental data were best fit by the beta-Poisson dose-response model. The three swimming experiments could be pooled, and this is the final recommended model with an LD50 of 13,257 amebae. The results of this study provide a better estimate of the probability of the risk to N. fowleri exposure than the previous models developed based on an intravenous exposure. An accurate dose-response model is the first step in quantifying the risk of free-living amebae like N. fowleri, which pose risks in recreational environments and have been detected in drinking water and premise plumbing systems. A better understanding of this risk will allow for risk management that limits the ability for pathogen growth, proliferation, and exposure.

Occurrence of Legionella spp. in Water-Main Biofilms from Two Drinking Water Distribution Systems.

The maintenance of a chlorine or chloramine residual to suppress waterborne pathogens in drinking water distribution systems is common practice in the United States but less common in Europe. In this study, we investigated the occurrence of Bacteria and Legionella spp. in water-main biofilms and tap water from a chloraminated distribution system in the United States and a system in Norway with no residual using real-time quantitative polymerase chain reaction (qPCR). Despite generally higher temperatures and assimilable organic carbon levels in the chloraminated system, total Bacteria and Legionella spp. were significantly lower in water-main biofilms and tap water of that system ( p < 0.05). Legionella spp. were not detected in the biofilms of the chloraminated system (0 of 35 samples) but were frequently detected in biofilms from the no-residual system (10 of 23 samples; maximum concentration = 7.8 × 104 gene copies cm-2). This investigation suggests water-main biofilms may serve as a source of Legionella for tap water and premise plumbing systems, and residual chloramine may aid in reducing their abundance.

Effect of heat shock on hot water plumbing microbiota and Legionella pneumophila control

BackgroundHeat shock is a potential control strategy for Legionella pneumophila in hot water plumbing systems. However, it is not consistently effective, with little understanding of its influence on the broader plumbing microbiome. Here, we employed a lab-scale recirculating hot water plumbing rig to compare the pre- and post-“heat shock” (i.e., 40 → 60 → 40 °C) microbiota at distal taps. In addition, we used a second plumbing rig to represent a well-managed system at 60 °C and conducted a “control” sampling at 60 °C, subsequently reducing the temperature to 40 °C to observe the effects on Legionella and the microbiota under a simulated “thermal disruption” scenario.ResultsAccording to 16S rRNA gene amplicon sequencing, in the heat shock scenario, there was no significant difference or statistically significant, but small, difference in the microbial community composition at the distal taps pre- versus post-heat shock (both biofilm and water; weighted and unweighted UniFrac distance matrices). While heat shock did lead to decreased total bacteria numbers at distal taps, it did not measurably alter the richness or evenness of the microbiota. Quantitative PCR measurements demonstrated that L. pneumophila relative abundance at distal taps also was not significantly different at 2-month post-heat shock relative to the pre-heat shock condition, while relative abundance of Vermamoeba vermiformis, a known Legionella host, did increase. In the thermal disruption scenario, relative abundance of planktonic L. pneumophila (quantitative PCR data) increased to levels comparable to those observed in the heat shock scenario within 2 months of switching long-term operation at 60 to 40 °C. Overall, water use frequency and water heater temperature set point exhibited a stronger effect than one-time heat shock on the microbial composition and Legionella levels at distal taps.ConclusionsWhile heat shock may be effective for instantaneous Legionella control and reduction in total bacteria numbers, water heater temperature set point and water use frequency are more promising factors for long-term Legionella and microbial community control, illustrating the importance of maintaining consistent elevated temperatures in the system relative to short-term heat shock.

Metal Accumulation in Representative Plastic Drinking Water Plumbing Systems

Metal abundance and scale morphology for cross‐linked polyethylene plastic pipes and pipe oxidative condition were examined in a one‐year‐old residential plumbing system. Experiments were also conducted to determine whether plastic pipe surfaces can influence scale formation. Within a single plumbing system, significant differences were found for scale morphology, the amount of metals present on pipe inner walls, and pipe aging condition. Metals found on the plastic pipes (aluminum, calcium, cobalt, copper, iron, lead, magnesium, manganese, nickel, selenium, and zinc) were corrosion products from water distribution and plumbing materials and were present in the source water. Iron was the most abundant contaminant. Bench‐scale experiments revealed that plastic served as a nucleation site for iron crystal growth and expedited crystal formation. Plastic plumbing pipes can adsorb metals that have health and aesthetic drinking water limits, and additional work is needed to understand the conditions that affect metal accumulation and release.

Interactive effects of temperature, organic carbon, and pipe material on microbiota composition and Legionella pneumophila in hot water plumbing systems

BackgroundSeveral biotic and abiotic factors have been reported to influence the proliferation of microbes, including Legionella pneumophila, in hot water premise plumbing systems, but their combined effects have not been systematically evaluated. Here, we utilize simulated household water heaters to examine the effects of stepwise increases in temperature (32–53 °C), pipe material (copper vs. cross-linked polyethylene (PEX)), and influent assimilable organic carbon (0–700 μg/L) on opportunistic pathogen gene copy numbers and the microbiota composition, as determined by quantitative polymerase chain reaction and 16S rRNA gene amplicon sequencing.ResultsTemperature had an overarching influence on both the microbiota composition and L. pneumophila numbers. L. pneumophila peaked at 41 °C in the presence of PEX (1.58 × 105 gene copies/mL). At 53 °C, L. pneumophila was not detected. Several operational taxonomic units (OTUs) persisted across all conditions, accounting for 50% of the microbiota composition from 32 to 49 °C and 20% at 53 °C. Pipe material most strongly influenced microbiota composition at lower temperatures, driven by five to six OTUs enriched with each material. Copper pipes supported less L. pneumophila than PEX pipes (mean 2.5 log10 lower) at temperatures ≤ 41 °C, but showed no difference in total bacterial numbers. Differences between pipe materials diminished with elevated temperature, probably resulting from decreased release of copper ions. At temperatures ≤ 45 °C, influent assimilable organic carbon correlated well with total bacterial numbers, but not with L. pneumophila numbers. At 53 °C, PEX pipes leached organic carbon, reducing the importance of dosed organic carbon. L. pneumophila numbers correlated with a Legionella OTU and a Methylophilus OTU identified by amplicon sequencing.ConclusionsTemperature was the most effective factor for the control of L. pneumophila, while microbiota composition shifted with each stepwise temperature increase. While copper pipe may also help shape the microbiota composition and limit L. pneumophila proliferation, its benefits might be constrained at higher temperatures. Influent assimilable organic carbon affected total bacterial numbers, but had minimal influence on opportunistic pathogen gene numbers or microbiota composition. These findings provide guidance among multiple control measures for the growth of opportunistic pathogens in hot water plumbing and insight into the mediating role of microbial ecological factors.

Influence of the copper-induced viable but non-culturable state on the toxicity of Pseudomonas aeruginosa towards human bronchial epithelial cells in vitro

The viable but non-culturable (VBNC) state of the opportunistic bacterium Pseudomonas aeruginosa was previously shown to be induced by copper ions in concentrations relevant to those in drinking water plumbing systems. This decrease of bacterial culturability without loss of viability might have an influence on human health due to an underestimation of the actual contamination in drinking water systems. The aim of this study was to investigate the influence of culturable P. aeruginosa, viable but not culturable as well as culturable again after resuscitation from the VBNC state on human bronchial epithelial cells (BEAS-2B) in vitro. Cyto- and genotoxic effects of P. aeruginosa at different states were studied using trypan blue, MTT, xCELLigence as well as the micronucleus assay. While P. aeruginosa in the VBNC state did not have any cytotoxic or genotoxic effect on BEAS-2B cells, untreated (culturable) and resuscitated P. aeruginosa did show cell damage, including disruption of cell membranes, inhibition of mitochondrial activity and cell proliferation as well as DNA-damaging effects. We conclude from our study that P. aeruginosa after resuscitation from the VBNC state regains its viability and cyto-/genotoxicity and therefore might influence human health.

Surveillance of surgical site infections by Pseudomonas aeruginosa and strain characterization in Tanzanian hospitals does not provide proof for a role of hospital water plumbing systems in transmission

BackgroundThe role of hospital water systems in the development of Pseudomonas aeruginosa (P. aeruginosa) surgical site infections (SSIs) in low-income countries is barely studied. This study characterized P. aeruginosa isolates from patients and water in order to establish possible epidemiological links.MethodsBetween December 2014 and September 2015, rectal and wound swabs, and water samples were collected in the frame of active surveillance for SSIs in the two Tanzanian hospitals. Typing of P. aeruginosa was done by multi-locus sequence typing.ResultsOf 930 enrolled patients, 536 were followed up, of whom 78 (14.6%, 95% CI; 11.6–17.5) developed SSIs. P. aeruginosa was found in eight (14%) of 57 investigated wounds. Of the 43 water sampling points, 29 were positive for P. aeruginosa. However, epidemiological links to wound infections were not confirmed. The P. aeruginosa carriage rate on admission was 0.9% (8/930). Of the 363 patients re-screened upon discharge, four (1.1%) possibly acquired P. aeruginosa during hospitalization. Wound infections of the three of the eight P. aeruginosa SSIs were caused by a strain of the same sequence type (ST) as the one from intestinal carriage. Isolates from patients were more resistant to antibiotics than water isolates.ConclusionsThe P. aeruginosa SSI rate was low. There was no evidence for transmission from tap water. Not all P. aeruginosa SSI were proven to be endogenous, pointing to other routes of transmission.

Interactive Effects of Corrosion, Copper, and Chloramines on Legionella and Mycobacteria in Hot Water Plumbing.

Complexities associated with drinking water plumbing systems can result in undesirable interactions among plumbing components that undermine engineering controls for opportunistic pathogens (OPs). In this study, we examine the effects of plumbing system materials and two commonly applied disinfectants, copper and chloramines, on water chemistry and the growth of Legionella and mycobacteria across a transect of bench- and pilot-scale hot water experiments carried out with the same municipal water supply. We discovered that copper released from corrosion of plumbing materials can initiate evolution of >1100 times more hydrogen (H2) from water heater sacrificial anode rods than does presence of copper dosed as soluble cupric ions. H2 is a favorable electron donor for autotrophs and causes fixation of organic carbon that could serve as a nutrient for OPs. Dosed cupric ions acted as a disinfectant in stratified stagnant pipes, inhibiting culturable Legionella and biofilm formation, but promoted Legionella growth in pipes subject to convective mixing. This difference was presumably due to continuous delivery of nutrients to biofilm on the pipes under convective mixing conditions. Chloramines eliminated culturable Legionella and prevented L. pneumophila from recolonizing biofilms, but M. avium gene numbers increased by 0.14-0.76 logs in the bulk water and were unaffected in the biofilm. This study provides practical confirmation of past discrepancies in the literature regarding the variable effects of copper on Legionella growth, and confirms prior reports of trade-offs between Legionella and mycobacteria if chloramines are applied as secondary disinfectant residual.

Environmental and economic life cycle assessment of PEX and copper plumbing systems: A case study

Cross-linked polyethylene (PEX) pipe has become viable alternative to traditional copper pipe to be used as residential water plumbing systems. PEX pipe is relatively cheaper and more versatile compared to a copper pipe. This study employs Life Cycle Assessment (LCA) to compare the economic and environmental performances of PEX and copper pipes over the life cycle of a student housing project in Lancaster, Pennsylvania. To achieve this objective, the costs in different life stages were extracted from three different sources in the market (RS Means book and two material suppliers; “Residential Copper Plumbing Products Limited Warranty” and “Uponor PEX”) and a Life Cycle Inventory (LCI) was used to quantify the energy and emissions of the two plumbing systems during the manufacturing process, in-service and end of life. The Building for Environmental and Economic Sustainability (BEES) model and SimaPro 8.0 software (Ecoinvent 3.0 database) were employed to develop the life cycle inventory of the piping system through all life cycle stages. BEES model adopts Tool for Reduction and Assessment of Chemical and other environmental Impacts (TRACI) life cycle impact assessment methods developed by the U.S. EPA Office of Research and Development. The LCA framework used in this study was based on a life cycle methodology that follows the International Organization for Standardization (ISO) 14,040 standard for LCA. The results of the analysis indicate that use of PEX piping instead of the traditional copper piping systems in residential buildings, would considerably reduce the total cost of the building up to 63% over its life cycle. Moreover, it can significantly reduce the carbon dioxide (CO2) emissions (approximately 42%) and lessen the negative effect of environmental impacts to land, water and air.

Survival of pathogens in drinking water plumbing systems: impact factors and sanitation options

The objective was to determine impact factors that would allow Pseudomonas aeruginosa and Legionella pneumophila to survive sanitation measures of household drinking water systems. Therefore, different disinfectant concentrations were tested under different operating conditions in close-to-practice experiments. Particular attention was paid to the viable but non-culturable (VBNC) state of the pathogens. Legionella pneumophila was able to survive disinfection with ClO2 in a culturable state in the biofilm at 37 °C while successful sanitation could be achieved at 11 °C, however non-culturable cells were still present. Culturable P. aeruginosa outlasted disinfection in biofilms of pipes at elevated nutrient concentrations and in built-in parts at 37 °C. Overall, the VBNC state was not the predominant factor for its survival. Additional experiments showed that the lack of an autochthonous biofilm may promote the growth of P. aeruginosa. This emphasizes the importance of localization and elimination of contamination sources in a plumbing system before disinfection is performed and the need for compliance with operating conditions and construction requirements defined by generally recognized standards of good practice in Germany.

Convective Mixing in Distal Pipes Exacerbates Legionella pneumophila Growth in Hot Water Plumbing.

Legionella pneumophila is known to proliferate in hot water plumbing systems, but little is known about the specific physicochemical factors that contribute to its regrowth. Here, L. pneumophila trends were examined in controlled, replicated pilot-scale hot water systems with continuous recirculation lines subject to two water heater settings (40 °C and 58 °C) and three distal tap water use frequencies (high, medium, and low) with two pipe configurations (oriented upward to promote convective mixing with the recirculating line and downward to prevent it). Water heater temperature setting determined where L. pneumophila regrowth occurred in each system, with an increase of up to 4.4 log gene copies/mL in the 40 °C system tank and recirculating line relative to influent water compared to only 2.5 log gene copies/mL regrowth in the 58 °C system. Distal pipes without convective mixing cooled to room temperature (23–24 °C) during periods of no water use, but pipes with convective mixing equilibrated to 30.5 °C in the 40 °C system and 38.8 °C in the 58 °C system. Corresponding with known temperature effects on L. pneumophila growth and enhanced delivery of nutrients, distal pipes with convective mixing had on average 0.2 log more gene copies/mL in the 40 °C system and 0.8 log more gene copies/mL in the 58 °C system. Importantly, this work demonstrated the potential for thermal control strategies to be undermined by distal taps in general, and convective mixing in particular.