Bottled Water Research Articles

Understanding consumption and purchase of tap water and diverse tap-alternative drinking water sources in Detroit, Michigan

ABSTRACT Several gaps remain in understanding individuals' water consumption reliance outcomes in disadvantaged communities. We utilize a cross-sectional sample of household-level survey data from predominantly low-income, minoritized households in Detroit, MI, to examine the relationship between tap and tap-alternative drinking water consumption and purchase behavior. We collected survey data from one English-speaking adult per household in May–October 2021 (n = 259). Consistent with past studies, tap water consumption is negatively correlated with single-use bottled water consumption and consuming drinking water from multiple sources. We also find tap distrust is correlated with tap-alternative water consumption, yet there is a surprising positive relationship between tap and overall bottled water consumption levels. Very low-income households were more likely to rely on bottled water and multiple other water sources simultaneously. Female respondents reported lower levels of most types of water consumption. Black respondents reported lower tap water and bottled water consumption but had higher levels of other tap-alternative source consumption. Our results call into question whether higher tap water consumption is synonymous with tap trust or with reduced bottled water consumption. Public health interventions must further address high levels of bottled water consumption among low-income individuals, and low tap water consumption among Black individuals.

In vial thin-film solid-phase microextraction using silver nanoparticles as coating for the determination of phenols in waters

A novel thin-film solid-phase microextraction (TF-SPME) device based on glass vials internally coated with silver nanoparticles (AgNPs) was developed for the first time, and used for determining five phenols in wastewater, bottled water, and irrigation water samples by high-performance liquid chromatography coupled to a photodiode array detector (HPLC-PDA). Different AgNPs were synthesized varying the ratio of metallic salt versus the reduction agent, and the pH of the synthesis. The preparation of the TF-SPME glass vial device was optimized in terms of the type of AgNPs used and the number of layers of AgNPs. Besides, the TF-SPME procedure was also optimized. The TF-SPME method was very simple, only requiring the addition of 18 mL of water and 5 min of agitation, followed by the disposal of the water and addition of the 750 µL as desorption solvent, and direct HPLC-PDA injection. The entire method showed adequate analytical performance, with limits of detection ranging from 3 to 8 μg·L-1, and intra-day and inter-day precision (as RSD), both evaluated with different vials and therefore showing inter-batch precision, with values between 8.70 and 16.4 %, and 6.0 and 19.7 %, respectively. The TF-SPME-HPLC-PDA procedure was compared with previous methods for the determination of phenols, both in terms of analytical performance and greenness assessments applying different metrics, showing clear advantages.

Performance assessment of food safety systems (FSMSs and FSC) in water bottling factories in view of their contextual characteristics

Foodborne illnesses affect 30% of people in developed nations and lead to financial difficulties in less wealthy countries. Insufficient understanding of pathogens and inadequate food safety practices in water bottling facilities impede progress. To prevent illnesses, ensuring clean water, proper sanitation, and good hand hygiene are essential in order to decrease the 829,000 annual deaths related to diarrhea. This study aimed to evaluate the performance of food safety systems in water bottling factories in view of their contextual characteristics. A study was conducted in northwestern Ethiopia at water bottling factories from January 2023 to August 2023. This study used a mixed method approach to collect and analyze data through laboratory testing, observations, interviews, questionnaires, and document analysis. The Kruskal‒Wallis H test was used to compare mean scores of context riskiness and food safety output across four clusters, while the Mann‒Whitney U test was used to compare means between certified and noncertified factories. In our study, 43% of the samples showed positive total plate count. The result also indicated the presence of potentially dangerous by-products of chlorine, trihalomethanes was found in bottled water. On average, the manufacturers operated in a moderate risk context. Inadequate food safety outcomes resulted from lower food safety management systems scores. Factories with insufficient Food Safety Management Systems often face challenges marked by safety protocol discrepancies, leading to higher risks of contamination and non-compliance with regulations. This assessment underscores the need for tailored interventions focusing on specific contextual barriers to improve food safety outcomes in the bottled water industry.

Assessment of Coliform Bacteria in Sokoto Metropolis' Public Portable Water Supply: Implications for Health and the Environment

Assessment of Coliform Bacteria in Sokoto Metropolis' Public Portable Water Supply: Implications for Health and the Environment

Utilizing the Concept of Entropy in the Second Law of Thermodynamics to Determine Risk Levels Associated with Groundwater and Bottled Drinking Water Using Rainwater Quality as a Clean Reference

The concept of entropy as a state function is employed in this paper within a radiation system designed to address the role of atomic disturbance in determining the levels of physical permeability changes in the studied states, comparing the results with those of a clean phase. This investigation begins with samples prepared for characterization tests using a unique technique for electromagnetic irradiation. The samples included: (1) a rainwater sample carefully collected during the first week of February 2024, serving as a high-quality natural reference in its aqueous phase; (2) a sample from a 42-meter-deep drinking water well (GW) in Ghout al-Dees, west of Tripoli, Libya; and (3) a bottled water sample (AA-WS3) commonly available in the Libyan market. The test results focused on the values of the physical property (τC), identified from the relationship between the entropy operator and time, as a physical fingerprint that accurately detects disturbed material permeability. The study concludes with a section linking the properties of the natural reference phase to the fingerprint characteristics of the studied samples, providing an approach to assess the quality of the tested water samples against the ideal chemophysical quality of rainwater. This led to findings that (1) the groundwater quality (QAA-WS2) was 76.92%, and (2) the quality of bottled water available in the Libyan market (QAA-WS3) was 74.57%, highlighting the role of the polymer composition in plastic container packaging as an additional factor, alongside the structures enclosing water sources, as in the case of the groundwater well exposed to contamination. Keywords: atomic disturbance, entropy, chemical identity, atomic irradiation, wave gaps

Resolving Tongue Entrapment: A Comprehensive Review with Case Report

AbstractObjectiveTo report a case of oral tongue entrapment due to a metal water bottle and review clinical considerations for managing this rare pathology.Study DesignCase report and literature review.SettingTertiary care hospital.MethodsA 6‐year‐old female presented with her tongue trapped in a threaded aluminum water bottle. Upon admission, her tongue was edematous and actively bleeding, though she was spontaneously breathing. A systematic review was then performed to document similar case studies found in the literature.ResultsEmergency removal of the foreign body was performed in the operating room using drill cutting burrs and metal shears. The bottle was successfully removed with minimal injury to the oral tongue. The patient required nasal intubation for seven days to allow the tongue edema to subside. Subsequent literature review identified 14 similar cases, with the vast majority occurring with similar brand of aluminum water bottle.ConclusionThe increasing use of reusable bottles may lead to a higher incidence of tongue entrapment cases. Awareness of this complication and appropriate management strategies are crucial to prevent severe outcomes in pediatric patients.

The state of food safety and hygiene in bottled water production facilities in the five provinces of the Central Highlands region in 2023

A cross-sectional descriptive study was conducted from March 2023 to December 2023 to assess the implementation of food safety regulations in bottled water production facilities across the five provinces of the Central Highlands region (Kon Tum, Gia Lai, Dak Lak, Dak Nong, Lam Dong) in 2023. The study evaluated food safety conditions, practices of direct production personnel, and collected bottled water samples for testing five bacterial indicators according to QCVN 6-1:2010/BYT. The results showed that the majority of facilities did not meet the criteria of physical infrastructure conditions at 74.7% (56/75), equipment and utensil conditions at 74.7% (56/75), conditions of direct production personnel at 44.0% (33/75), personal hygiene practices at 65.3% (49/75), and bottle cleaning practices at 72% (54/75). The rate of microbial contamination in bottled water products was 70.7% (53/75), of which the main contamination was Pseudomonas aeruginosa 45.3% (34/75), total Coliforms 42.7% (32/75), Clostridia 6.7% (5/75) and Streptococci feacal 2.0% (2/75). Some factors related to bacterial contamination in bottled water products are the condition of facilities, practicing personal hygiene, and practicing bottle hygiene.

Research to Improve the Design of Label-Free Water Bottles -Focusing on Consumer Needs and Case Analysis-

Research to Improve the Design of Label-Free Water Bottles -Focusing on Consumer Needs and Case Analysis-

From crisis to prevention: mining big data for public health insights during the flint water crisis

This study investigates the utility of Google Trends and Google Search data in retrospectively analyzing the Flint Water Crisis, a significant public health event. By examining keywords relevant to the crisis, such as “lead,” “bottled water,” “water filters,” “pneumonia,” and “Legionnaires’ Disease,” we aimed to uncover patterns in public awareness and response during a public crisis and explore how such awareness and responses could potentially aid in reducing the risk of similar crises in the future. Our analysis reveals a clear correlation between search frequencies and the crisis timeline, with spikes in search terms corresponding to key events. This suggests that such data can serve as a valuable tool for understanding public sentiment and behavior in the face of environmental disasters. The research underscores the potential of “Big Data,” led by search engines and social media platforms, in shaping public policy and informed decision-making. However, it also addresses the limitations and challenges in using these data sources, including issues of data consistency, replicability, and the influence of sociocultural contexts on search behaviors. The study advocates for the combined use of Google Trends and Google Search data, complemented by other datasets, for a more comprehensive understanding of public engagement in environmental crises. This work contributes to the growing field of infodemiology, emphasizing the importance of big data analysis in environmental science and public health research.

Synthetic Microplastics in UK tap and bottled water; Implications for human exposure

There is increasing concern for public health over inadvertent human exposure to MPs due to potential adverse health effects linked to MPs polymeric composition, toxic chemical additives, and/or harmful microorganisms adsorbing onto their surfaces. While numerous studies have reported MPs occurrence and risk in the freshwater aquatic environment and drinking water sources (e.g., rivers, lakes, and reservoirs), the current state-of-knowledge on MPs pollution in drinking water (i.e., tap water and bottled water) remains limited at a global level. This paper provides the first comprehensive study of the occurrence, concentrations, size distribution, shape, and polymer type of MPs in 177 tap water samples from 13 cities in the United Kingdom, as well as 85 samples of bottled water from 17 popular brands, with various packaging materials, on the UK market.MPs were detected in all tap water samples (range 6–100 MP/L) and bottled water samples (range 12–62 MP/L). Average MPs concentration in tap water (40 ± 16 MP/L) was statistically indistinguishable from that in bottled water (37 ± 11 MP/L). However, the average MPs particle size in tap water (32.4 μm) exceeded significantly (p < 0.05) that in bottled water (26.5 μm), indicating the various purification processes applied to bottled water may help remove larger MPs, but raises concern over the potential adverse health effects from exposure to smaller MPs. The most frequently detected polymer types were: polypropylene (PP), polyethylene (PE), and polyvinyl chloride (PVC) in tap water, and PE, PP and polyethylene terephthalate (PET) in bottled water. A strong correlation was observed (r = 0.68, P = 0.049) between the plastic cap material (PE) and the predominant polymer type in the bottled water. In terms of morphology, fragments and fibres were the most abundant MPs, together constituting 92 % and 96 % of MPs detected in tap and bottled water samples, respectively.Using EFSA (European Food Safety Authority) recommended daily water intakes, the corresponding exposures to MPs in different UK age groups were estimated. On a body weight (BW) basis, infants and toddlers were exposed (4 MP/kg BW/day) at a higher level than adults (1 MP/kg BW/day). This raises concern, given the former's incompletely developed immune/nervous systems rendering them at higher risk of adverse health effects from such exposure.

Natural deep eutectic solvent-based dispersive liquid-liquid microextraction of pesticides in drinking waters combined with GC-MS/MS detection

The current research aims to develop a new analytical method applying a dispersive liquid-liquid microextraction (DLLME) assisted by vortex and using an environmentally friendly extractant for the preconcentration of organochlorine and organophosphorus pesticides followed by gas chromatography-tandem mass spectrometry (GC-MS/MS) analysis. The extractant (i.e., natural deep eutectic solvent (NADES)) is safe, cheap, biodegradable and can be prepared by simply mixing DL-menthol and decanoic acid (molar ratio 2:1). The main experimental factors affecting the extraction of all analytes evaluated (19 organochlorine and organophosphorus pesticides) have been optimised using a multivariate analysis consisting in two steps: a Plackett-Burman design followed by a central composite design (CCD). Seven experimental factors have been evaluated: (i) sample volume; (ii) NADES volume; (iii) sample pH; (iv) extraction time; (v) centrifugation time; (vi) centrifugation speed; and (vii) ionic strength (NaCl %, w v−1). For the significant variables, the optimum values were 10 mL sample and 45 μL NADES. No pH adjustment as well as addition of NaCl were needed. The other variables were set at 3 min extraction time, 5 min centrifugation time and 900×g centrifugation speed, respectively. Under the optimised extraction conditions, the limit of quantification (LOQ) values ranged between 0.2 and 78 ng L−1 for all analysed pesticides. Furthermore, the proposed analytical method has been successfully applied to drinking water (bottled spring water). The recovery study (n = 3) has been evaluated at 0.1, 1.0 and 5.0 μg L−1 spiking levels, obtaining relative recovery values within the range of 70 % and 117 % and RSD values between 1 % and 20 % for all the analytes studied, except for p,p-DDT (56–77 % in high conductivity water samples).

Assessment of Radioactivity Levels in Bottled Drinking Water Consumed by Different Age Groups of People in Kampala City, Uganda

The activity concentrations of natural radionuclides in drinking water may be enhanced depending on the geological strata from which it is extracted. The demand and consumption of bottled drinking water is increasing every year in Uganda mainly in Kampala city. Therefore, the study was purposed to assess the levels of natural radioactivity using a gamma spectrometer in commonly bottled drinking water in Kampala City. The mean specific activities for Ra-226, Th-232, and K-40 in bottled drinking water were 4.45±0.20, 1.32±0.27, and 46.33±0.24 Bq/l respectively which exceeded the specific World Health Organization recommended guidance level of 1.0 Bq/l except for K-40. The mean activity concentrations were however comparable to the mean concentration of tap water used in Kampala City, that is 4.00±0.16, 1.4±0.19, and 47.05±0.21 Bq/l for Ra-226, Th-232, and K-40 respectively. The annual effective dose contributed by two radionuclides of Ra-226 and Th-232 in the bottled water exceeded the maximum dose limit of 0.1 mSv/y recommended by the World Health Organization (WHO). The mean estimated excess lifetime cancer risk due to Ra-226 (0.00177) exceeded the recommended limit of 0.001 while that due to Th-232 (0.0001) was below the recommended limit. Therefore, the main contributor to the total annual ingestion dose was Ra-226. Due to the high solubility and toxicity of Ra-226, there is a significant concern warranting further investigation. Finally, the results from the study revealed that there was not any trace of contamination from artificial radionuclides in the bottled drinking water manufactured and consumed within Kampala City. With the growing populational demand for bottled drinking water, it's recommended that radioactivity levels comply with the WHO recommended radioactivity levels. Therefore, this study contributes to the revision of standards and development of regulations for radiological protection of the public and the environment from risks of radiation exposure associated with bottled drinking water.

Examining Drinking Water Preferences among University Students: A Comparative Assessment

In recent years, there has been a clear increase in bottled water consumption globally, which has led to significant health and environmental concerns. This cross-sectional study aims to understand the attitude and preferences of university students in Qatar towards the use of bottled and tap drinking water using an online survey questionnaire (September and October 2022). The number of students who responded to the online survey was 14% (n = 688) of the student population, with a mean age of 22.23 ± 5.15 years from the different colleges. Overall, a higher fraction of students preferred plastic bottled water as the main drinking source on campus (n = 468; 68.02%), with a majority of them being females (72.08%). Out of the 468 students who preferred plastic bottled water, safety was the most important factor (43.80%), followed by convenience (16.88%) and taste (15.60%). Cost (15.17%), personal/family habits (5.13%), environmental concerns (2.14%), and mineral content (1.28%) were found to be the least important factors. Among the 45 students (6.54%) who preferred tap water over plastic bottled water, cost (46.67%) was the dominant factor, followed by convenience (20.00%), environmental concerns and safety (13.33% each), taste (4.44%), and personal/family habits (2.22%). Around 72% believed that plastic water bottles were more harmful to the environment, yet the greater majority still resorted to this source. The research study underscores safety as the major factor favoring bottled water over tap water. Further, it suggests that knowledge alone does not fully explain student behavior, implying other influential factors. This study recommends campaigns focus on attitude and behavior change and not solely emphasize knowledge. There is an immediate need to further educate students through environmental and health literacy programs on water consumption and quality. Enabling the population to understand the positive and negative aspects of their choices may be an effective remedy for ensuring a healthy population and healthy environment.

Unveiling bisphenol A toxicity: human health impacts and sustainable treatment strategies

Abstract Introduction The widespread presence of bisphenol-A (BPA) in consumer goods like water bottles and eyeglass frames raises serious concerns about the chemical’s ability to accumulate in human tissues. Molecular filtration and activated carbon adsorption are two of the many BPA treatment technologies that have emerged in response to these issues; both are essential in the removal or degradation of BPA from water sources and industrial effluents. Content To secure the long-term health and environmental advantages of BPA treatment approaches, sustainable development is essential. Both the efficient elimination or destruction of BPA and the reduction of the treatment operations’ impact on the environment are important components of a sustainable approach. Different search engines like Pub-Med, MEDLINE, Google Scholar and Scopus are used for these systematic reviews and analyzed accordingly. This can be accomplished by making treatment facilities more energy efficient and using environmentally friendly materials. Greener ways to deal with BPA pollution are on the horizon, thanks to innovative techniques like bioremediation and improved oxidation processes. Reducing dependence on conventional, resource-intensive procedures can be achieved by investigating the use of bio-based materials and natural adsorbents in treatment processes. Summary and Outlook This review article tackling the health and environmental concerns raised by BPA calls for an integrated strategy that incorporates sustainable development principles and technology progress. We can reduce the negative impacts of BPA contamination, improve environmental stewardship in the long run, and ensure human health by combining cutting-edge treatment technologies with sustainable behaviours.

Radioactivity Levels, Spatial Distribution, and Radiological Risk Assessment of 226Ra, 228Ra, 40K, and 3H in Water Samples from Dhaka City and Savar, Bangladesh.

This investigation was conducted to measure the radioactivity levels of 226Ra, 228Ra, 40K, and 3H in the 13 most popular branded bottled mineral water (BMW), 12 groundwater sources consumed in Dhaka city, Bangladesh, and six water samples collected from the nuclear object site at Savar, adjacent to Dhaka. The activity of 3H was measured by using a liquid scintillation counter, and a gamma-ray spectrometer with an HPGe detector was used to measure the activity of other radionuclides. The average activity concentrations of 226Ra, 228Ra, 40K, and 3H in BMW samples and groundwater were found to be 1.81 ± 0.43, 1.74 ± 0.40, 43.08 ± 6.23, 2.42 ± 0.16, and 1.61 ± 0.51, 1.69 ± 0.45, 57.42 ± 3.16, and 3.02 ± 0.19 Bq/L, respectively. In addition, the activity concentrations of identified radionuclides in water samples collected from Savar were found to be 1.59 ± 0.43, 1.53 ± 0.50, 99.83 ± 3.05, and 2.95 ± 0.20 Bq/L. With the exception of 3H, the activity concentration and the annual effective dose of 40K, 226Ra, and 228Ra surpassed the acceptable thresholds of the WHO. The combined activity of radium (Rac) also exceeds the USEPA recommended maximum permissible limit of 0.185 Bq/L. The excess lifetime cancer risk results were below the permissible threshold of 10-3 for radiological risks. Groundwater was subjected to an AAS analysis for common metals (Na, Mg, and Ca) and heavy metals (Fe, Cr, Cu, and Pb). The results showed that the heavy metals were below the detection limit. Radionuclide contents in groundwater of Dhaka city were mapped spatially using a GIS technique. Statistical analyses such as one-way ANOVA, one sample t test, and Pearson's correlation analysis were also performed. According to Pearson's correlation analysis, 228Ra is mostly responsible for radiation risk in BMW and groundwater.

Evaluation of potential human health risks associated with Li and their relationship with Na, K, Mg, and Ca in Romania's nationwide drinking water.

Increasing lithium (Li) demand worldwide due to its properties and role in renewable energy will raise water reservoir pollution and side effects on human health. Divergent results regarding Li concentration in water and affective disorders are found in the literature, which is why regional reports are expected. The present study evaluated the occurrence and human health risks resulting from oral exposure, respectively, and the relationship between alkali metals (Li, Na, and K) and minerals (Mg, Ca) in balanced purified water (bottled) and spring water. The ICP-MS technique was used to measure a national database with 53 bottled and 42 spring water samples randomly selected. One-way ANOVA, Pearson correlation, and HCA analysis were applied to assess the possible relationship between metals in water. The possible side effects of Li poisoning of water resources on human health have been evaluated using the Estimated Daily Intake Index (EDI) and Total Hazard Quotient (THQ). The toxic metals (As, Hg, and Pb) were measured, and the results indicate values above the detection limit of 22.3% of samples in the case of lead but not exceeding the safety limits. Depending on the water sources, such as bottled and spring water, the Li concentration varied between 0.06-1,557 and 0.09-984% μg/L. We found a strong positive correlation between Li and Na and Mg, varying between bottled and spring waters (p% <%0.001). Li exceeded the limit set by the Health-Based Screening Level (HBSL) in 41.37 and 19% of bottled and spring water samples. The oral reference doses (p-RfDs) for the noncancer assessment of daily oral exposure effects for a human lifetime exceeded threshold values. The THQ index shows potential adverse health effects, requiring further investigations and remedial actions in 27.58% of approved bottled waters and 2.38% of spring waters. We can conclude that water is safe based on the Li concentration found in drinking water and supported by a gap in strict regulations regarding human Li ingestion. The present study can serve decision-makers and represent a starting database with metals of interest for further clinical studies. Decision-makers can also use it to find solutions for sustainable management of clean and safe drinking water.

Evaluation of Exposure to Bisphenol A, Bisphenol F, and Phthalates in Patients with Phenylketonuria and Its Differences According to Dietary Status.

Phenylketonuria (PKU) is the most common amino acid metabolism disorder. Patients with blood phenylalanine (Phe) levels of ≥6 mg/dL require treatment, and the most definitive treatment is the Phe-restricted diet. Bisphenols and phthalates are widely used endocrine-disrupting chemicals (EDCs) found in personal care products, baby bottles, and food packaging. In this study, we evaluated the possible routes of exposure to these EDCs in patients diagnosed with PKU (n = 105, 2-6 years of age) and determined the relationship between the plasma levels of bisphenol A (BPA), bisphenol F (BPF), di-butyl phthalate (DBP), di-(2-ethylhexyl) phthalate (DEHP), mono-(2ethylhexyl) phthalate (MEHP), and dietary regimens. Participant characteristics and exposure routes were evaluated according to their dietary treatment status. Thirty-four of these patients were on a Phe-restricted diet, while the remaining 71 had no dietary restrictions. DBP and DEHP levels were higher in those using plastic tablecloths (p = 0.049 and p = 0.04, respectively). In addition, plasma DBP levels were higher in those who used bottled water (p = 0.01). Being under 4 years of age, using plastic food containers, and using plastic shower curtains were characteristics associated with higher MEHP levels (p = 0.027, p = 0.019, and p = 0.014, respectively). After adjustment for baseline characteristics (Model 1), the odds of having a plasma BPA level in the upper tertile were 3.34 times higher in the free-diet group (95% CI = 1.09-10.25). When we additionally adjusted for plastic exposure (Model 2), the odds ratio was found to be 18.64 (95% CI = 2.09-166.42) for BPA. In the free-diet group, the probability of having plasma DEHP levels in the upper tertile was increased by a relative risk of 3.01 (p = 0.039, 95% CI = 1.06-8.60). Our results indicate that exposure to bisphenols and phthalates varies with dietary treatment. The difference in sources of exposure to EDCs between the diet and non-diet groups indicates that diet plays an important role in EDC exposure.

Multiplex aptamer cluster detection platform and systems toxicology study for 17β-estradiol, bisphenol A, and diethylstilbestrol

Intake of 17β-estradiol (E2), bisphenol A (BPA), and diethylstilbestrol (DES) from food can contribute to endocrine disorders. Therefore, developing a sensitive method for the simultaneous detection of E2, BPA, and DES and understanding their combined effects on endocrine disruption are crucial. We developed a fluorescence aptasensing platform utilizing DNase I–assisted cyclic enzymatic signal amplification in conjunction with an aptamer/graphene oxide complex. Using PEG 20000 as a surface-blocking agent, the aptasensor achieved ultralow detection limits of 2.643, 0.3039, and 0.6996 for E2, BPA, and DES, respectively. The sensor demonstrated accurate detection in plastic bottled water at spiked levels of 10 and 100 ng/mL. Systems toxicology revealed 30 potential targets for mixture-induced endocrine disruption. Molecular docking showed binding affinities of E2, BPA, and DES for ESR1 of −9.94, −8.29, and − 8.98 kcal/mol, respectively. These results highlight the effectiveness of the aptasensor and provide valuable insights into endocrine disruption mechanisms.

Image Recognition for Floating Waste Monitoring in a Traditional Surface Irrigation System

In the traditional surface irrigation system of Vega Baja del Segura (Spain), large amounts of floating waste accumulate at certain points of the river, irrigation channels and drainage ditches, causing malfunctioning of the irrigation network and rising social problems related to the origins of waste. This work proposes a standardized and quick methodology to characterize the floating waste to detect changes in its amount and components. A dataset was created with 477 images of floating plastic items in different environments and was used for training an algorithm based on YOLOv5s. The mean Average Precision of the trained algorithm was 96.9%, and the detection speed was 81.7 ms. Overhead photographs were taken with an unmanned aerial vehicle at strategic points of the river and channels, and its automatic count of floating objects was compared with their manual count. Both methods showed good agreement, confirming that water bottles were the most abundant (95%) type of floating waste. The automatic count reduced the required time and eliminated human bias in image analysis of the floating waste. This procedure can be used to test the reach of corrective measures implemented by local authorities to prevent floating waste in the river.

Per- and polyfluoroalkyl substances contamination of drinking water sources in Africa: Pollution sources and possible treatment methods

Despite the detection of poly- and perfluorinated alkyl substances (PFAS) in the water system in Africa, the effort towards mitigating PFAS in water in Africa needs to be better understood. Therefore, this review evaluated the contamination status and mitigation methods for handling PFAS-contaminated water systems in Africa. The findings revealed the presence of PFAS in wastewater treatment plant (WWTP) effluents, surface water and commercially available bottled and tap water in African countries. The concentration of PFAS in drinking water sources reviewed ranged from < limits of quantification to 778 ng L−1. The sources of PFAS in water systems in Africa are linked to uncontrolled importation of PFAS-containing products, WWTP effluents and inappropriate disposal of PFAS-containing materials. The information on treatment methods for PFAS-contaminated water systems is scanty. Unfortunately, the treatment method is challenged by poor water research infrastructure and facilities, lack of awareness, poor research funding and weak legislation; however, adsorption and membrane technology seem favourable for removing PFAS from water systems in Africa. It is essential to focus on monitoring and assessing drinking water quality in Africa to reduce the disease burden that this may cause. Most African countries' currently implemented water treatment facilities cannot efficiently remove PFAS during treatment. Therefore, governments in Africa need to fund more research to develop an efficient water treatment technique that is sustainable in Africa.