Water-dispersible Nanoparticles Research Articles

Full color control and patterned display device from cyan/magenta/yellow water-dispersed electrochromic polymer nanoparticles systems.

Electrochromic polymers (ECPs) have great application potential in flexible displays, and there is an increasing expectation of using green methods to form ECP films. Herein, we propose a modified microemulsion method to prepare Cyan/Magenta/Yellow (C/M/Y) water-dispersed electrochromic polymer nanoparticles systems. Three polymer films (WDECP-C/M/Y) maintain similar electrochemical properties compared to their corresponding organic solvent-based polymer films. It is intriguing that WDECP-C/M/Y exhibit better electrochromic properties in terms of higher cycling stability (97.24%, 95.05%, and 52.84%, respectively) and faster switching time (0.94 s, 1.09 s, and 1.34 s for coloring time, respectively) due to the introduction of nanoparticles. In addition, it can achieve various desired colors by blending the C/M/Y water-dispersed electrochromic polymer nanoparticles systems in different ratios. The calculated chromaticity coordinates of the blending polymer films show close values to the experimental observation, and the calculated ΔE*ab values range from 2.6 to 10.3, which may provide theoretical guidance for precisely color control. Finally, large-scale and patterned devices were assembled, which can achieve colored-to-colorless reversible electrochromism at a low driving voltage of 0 to 1.5 V. This work puts forward a universal and environmentally sustainable strategy to prepare water-dispersed electrochromic polymer nanoparticles systems, demonstrating their wide range of applications in display devices and electronic tags.

Visible-light-excited robust room-temperature phosphorescence of dimeric single-component luminophores in the amorphous state

Organic room temperature phosphorescence (RTP) has significant potential in various applications of information storage, anti-counterfeiting, and bio-imaging. However, achieving robust organic RTP emission of the single-component system is challenging to overcome the restriction of the crystalline state or other rigid environments with cautious treatment. Herein, we report a single-component system with robust persistent RTP emission in various aggregated forms, such as crystal, fine powder, and even amorphous states. Our experimental data reveal that the vigorous RTP emissions rely on their tight dimers based on strong and large-overlap π-π interactions between polycyclic aromatic hydrocarbon (PAH) groups. The dimer structure can offer not only excitons in low energy levels for visible-light excited red long-lived RTP but also suppression of the nonradiative decays even in an amorphous state for good resistance of RTP to heat (up to 70 °C) or water. Furthermore, we demonstrate the water-dispersible nanoparticle with persistent RTP over 600 nm and a lifetime of 0.22 s for visible-light excited cellular and in-vivo imaging, prepared through the common microemulsion approach without overcaution for nanocrystal formation.

The Molecular Footprint of Peptides on the Surface of Ultrasmall Gold Nanoparticles (2 nm) Is Governed by Steric Demand.

Ultrasmall gold nanoparticles were functionalized with peptides of two to seven amino acids that contained one cysteine molecule as anchor via a thiol-gold bond and a number of alanine residues as nonbinding amino acid. The cysteine was located either in the center of the molecule or at the end (C-terminus). For comparison, gold nanoparticles were also functionalized with cysteine alone. The particles were characterized by UV spectroscopy, differential centrifugal sedimentation (DCS), high-resolution transmission electron microscopy (HRTEM), and small-angle X-ray scattering (SAXS). This confirmed the uniform metal core (2 nm diameter). The hydrodynamic diameter was probed by 1H-DOSY NMR spectroscopy and showed an increase in thickness of the hydrated peptide layer with increasing peptide size (up to 1.4 nm for heptapeptides; 0.20 nm per amino acid in the peptide). 1H NMR spectroscopy of water-dispersed nanoparticles showed the integrity of the peptides and the effect of the metal core on the peptide. Notably, the NMR signals were very broad near the metal surface and became increasingly narrow in a distance. In particular, the methyl groups of alanine can be used as probe for the resolution of the NMR spectra. The number of peptide ligands on each nanoparticle was determined using quantitative 1H NMR spectroscopy. It decreased with increasing peptide length from about 100 for a dipeptide to about 12 for a heptapeptide, resulting in an increase of the molecular footprint from about 0.1 to 1.1 nm2.

Water Dispersible Colloidal Metal and Metal Oxide Nanoparticles Synthesis for Agarwood Inoculation: A Review

Agarwood is one of the most expensive natural products, produced from Aquilaria Spp. These plants produce agar resin through mechanical, biological, or chemical stress. Besides these, the particles having size in the range of 1-100 nm, are known as nanoparticles, have ultra-high surface area and surface plasmon resonance, can create stress on living plants when incorporated into the plant body. Adopting this concept, we intend to produce agarwood by inoculating water-dispersible metal/metal oxide nanoparticles. Therefore, we aim to synthesize water-dispersible four noble metals (Au, Ag, Pt, Pd) and five metal oxides (Fe3O4, TiO2, SnO2, MnO2, CuO) nanoparticles in aqueous colloidal states for application in biotechnology, considering the facile synthetic routes, readily available and inexpensive precursors, and stability of the products under normal laboratory conditions for an extended period, utilizing the synthesis methods of precipitation of metal/metal oxide nanoparticles from an aqueous solution, microwave and ultrasound-assisted rapid heating methods, sol-gel methods, and surfactant-assisted microemulsion methods. We believe that by applying any of these methods, water-dispersible, long-lasting colloidal metal/metal oxide nanoparticles can be synthesized using a simple laboratory setup, without the need for sophisticated tools or instruments. IUBAT Review, 6(2): 41-76

The influence of the polyol solvents on the continuous growth of water-dispersible iron oxide nanoparticles

Magnetic nanoparticles have continued to gain significant attention due to their unique magnetic properties and potential applications. However, it is still challenging to directly synthesize water-dispersible magnetic nanoparticles with controlled size for biomedical applications. This study investigates the influence of solvents on the continuous growth of magnetic nanoparticles, aiming to achieve controlled size and excellent water dispersibility via thermal decomposition in polyol solvents. The size of the nanoparticles gradually increases with longer polyol chain solvents. The increase in nanoparticles size is more significant under a higher reaction temperature (220 °C) compared to a lower temperature (190 °C). These monodispersed nanoparticles exhibit strong superparamagnetic properties, improving with longer solvent chain lengths at the same size. Magnetic resonance imaging (MRI) studies reveal higher relaxivities for magnetic nanoparticles synthesized in longer-chain polyols. This research offers valuable insights for synthesizing magnetic nanoparticles with precise sizes, magnetic properties, and biomedical applications.Graphical abstract

Carbon nano-onions: Individualization and enhanced water dispersibility

Carbon nano-onions (CNOs) are a unique class of carbon nanomaterials, with a concentric fullerene-like structure and sp2-hybridized carbon atoms. Onions present high mechanical strength, good conductivity, the capability to intercalate alkali metals, showing promising applications in diverse fields, such as tribology, energy storage, and nanomedicine. Their production has been developed by several techniques, with the most interesting being the thermal annealing of carbon nanodiamonds because of the easy scalability (gram-scale) and morphologic control (size and shape form perfectly spherical to polygonal). However, this synthesis is commonly affected by the formation of strong aggregates larger than 100 nm, attributed to carbon soot formation or strong van der Waals interactions, hindering the work with small and individual particles, leading to an altered yield of functionalization. In this study we propose a method for CNO individualization based on strong acid treatment, yielding highly water dispersible nanoparticles. Analytical ultracentrifugation (AUC) analysis is employed as a technique to investigate the particle dimensions directly in dispersion, permitting an ensemble analysis free from further sample preparation bias. Moreover, we also provide a comprehensive evaluation of the common post-synthetic treatment methods, and their effects. By means of scanning transmission electron microscopy with medium angle annular dark field detector and electron energy loss spectroscopy (STEM-MAADF and EELS) we have shown images of individual CNOs. Their successful separation achieved in this study is significant for future research and applications in nanomedicine, electrochemistry, and materials composites, where sample homogeneity is critical.

A design strategy of pure Type-I thiadiazolo[3,4-g]quinoxaline-based photosensitizers for photodynamic therapy

Most photosensitizers (PSs) for photodynamic therapy (PDT) can generate singlet oxygen through transferring energy with oxygen, called Type-II PSs. However, the microenvironment of solid tumor is usually anoxic. Type-I PSs can generate reactive oxygen species (ROS) through transferring electron to substrate, showing more efficient in PDT. But pure Type-I PSs are very rare. The relationship between PSs’ chemical structure and Type-I mechanism has not been explicitly stated. In this study, two thiadiazolo [3,4-g]quinoxaline (TQ) PSs (PsCBz-1 and PsCBz-2) are synthesized through introducing carbazole groups to the 4,9-position of TQ backbone. Comparing with their prototype PS, 4,9-dibrominated TQ (TQs-4), the introduction of carbazole groups reverses the reaction mechanism of PSs from pure Type-II to pure Type-I. Excitingly, the water-dispersible nanoparticles (NPs) of PsCBz-1 can achieve strong phototoxicity in vitro under both normoxia and hypoxia through Type-I mechanism. In addition, PsCBz-1 NPs also exhibits remarkable PDT antitumor effect in vivo. This study provides a feasible design strategy for pure Type-I PSs.

Laser-Synthesized Elemental Boron Nanoparticles for Efficient Boron Neutron Capture Therapy

Boron neutron capture therapy (BNCT) is one of the most appealing radiotherapy modalities, whose localization can be further improved by the employment of boron-containing nanoformulations, but the fabrication of biologically friendly, water-dispersible nanoparticles (NPs) with high boron content and favorable physicochemical characteristics still presents a great challenge. Here, we explore the use of elemental boron (B) NPs (BNPs) fabricated using the methods of pulsed laser ablation in liquids as sensitizers of BNCT. Depending on the conditions of laser-ablative synthesis, the used NPs were amorphous (a-BNPs) or partially crystallized (pc-BNPs) with a mean size of 20 nm or 50 nm, respectively. Both types of BNPs were functionalized with polyethylene glycol polymer to improve colloidal stability and biocompatibility. The NPs did not initiate any toxicity effects up to concentrations of 500 µg/mL, based on the results of MTT and clonogenic assay tests. The cells with BNPs incubated at a 10B concentration of 40 µg/mL were then irradiated with a thermal neutron beam for 30 min. We found that the presence of BNPs led to a radical enhancement in cancer cell death, namely a drop in colony forming capacity of SW-620 cells down to 12.6% and 1.6% for a-BNPs and pc-BNPs, respectively, while the relevant colony-forming capacity for U87 cells dropped down to 17%. The effect of cell irradiation by neutron beam uniquely was negligible under these conditions. Finally, to estimate the dose and regimes of irradiation for future BNCT in vivo tests, we studied the biodistribution of boron under intratumoral administration of BNPs in immunodeficient SCID mice and recorded excellent retention of boron in tumors. The obtained data unambiguously evidenced the effect of a neutron therapy enhancement, which can be attributed to efficient BNP-mediated generation of α-particles.

Acceptor engineering of semiconducting oligomers for improved NIR-II fluorescence imaging and therapy

Fluorescence imaging (FI) conducted over second near-infrared (NIR-II) window shows superior performance with deeper penetration, higher temporal and spatial resolution than that over the first near-infrared (NIR-I) window. Various attempts have been made to develop ideal fluorophores with high brightness, longer emission wavelength and good biocompatibility for NIR-II FI. Here, we design and synthesize three D-A-D type oligomers through acceptor engineering approach to compare their optical properties. The newly prepared oligomer (O3) based on thiadiazolobenzotriazole (TBZ) acceptor exhibits the highest NIR-II brightness compared with the counterparts because of the weakest intramolecular charge transfer transition. Water-dispersed O3 nanoparticles (NPs) are then fabricated via nanoprecipitation method, which demonstrate superior NIR-II imaging ability for in vivo vascular imaging and tumor-targeted imaging. Furthermore, O3 NPs exhibit significant photothermal performance, thus inducing obvious cancer cell elimination upon 808 nm light irradiation. Taken together, TBZ unit is a promising electron acceptor for constructing bright and functional NIR-II dyes. This acceptor engineering method has offered us a feasible strategy to develop versatile NIR-II fluorophores.

Fabrication of water-dispersible and cell-stimulating calcium phosphate nanoparticles immobilizing basic fibroblast growth factor.

Basic fibroblast growth factor (bFGF) is a therapeutic protein that can enhance angiogenesis, wound healing, and tissue regeneration; however, it is extremely unstable even under a normal physiological environment. Biocompatible calcium phosphate (CaP) nanoparticles (NPs) co-immobilizing bFGF, heparin, and ferucarbotran would be useful as a multifunctional delivery carrier of bFGF. In this study, such NPs were successfully fabricated by a coprecipitation process, using a labile supersaturated CaP solution containing bFGF, heparin, and ferucarbotran. The NPs showed relatively high negative zeta potential (-12mV) because of the negatively charged heparin, which enabled their stable dispersion in water. The hydrodynamic diameter of the NPs was around 200nm. Immunoreactive bFGF was released from the NPs in an acellular medium dose-dependently. The NPs promoted proliferation of baby hamster kidney fibroblasts (BHK-21 cells) and mouse osteoblastic MC3T3-E1 cells at a certain dose range, although they inhibited proliferation of rat pheochromocytoma (PC-12) cells. These results demonstrated that the effect of the NPs on cell proliferation was dependent on the cell type and dose, the details of which should be investigated in a future study.

Oligomerization Strategy of D-A-Type Conjugated Molecules for Improved NIR-II Fluorescence Imaging.

Fluorescence imaging (FI) in the second near-infrared (NIR-II) window has emerged as a promising imaging method for cancer diagnosis because of its superior properties such as deep penetration depth and high signal-to-background ratio. Despite the superiorities of organic conjugated nanomaterials for NIR-II FI, the issues of low fluorescence quantum yield, weak metabolic capability, undefined molecular structure for conjugated polymers, weak light-harvesting ability, short emission wavelength, and high synthetic complexity for conjugated small molecules still remain to be concerned. We herein propose an oligomerization strategy by facilely adjusting the oligomerization time to balance the advantages and disadvantages between conjugated polymers and small molecules, obtaining the candidate (CO1, oligomerization time: 1 min) with the optimal NIR-II optical performance. Then the CO1 is further prepared into water-dispersed nanoparticles (CON1) via a nanoprecipitation approach. By virtue of the suitable size, excellent NIR-II optical properties, low toxicity, and strong cell-labeling ability, the CON1 is successfully employed for in vivo NIR-II imaging, permitting the real-time visualization of blood vascular system and tumors with high sensitivity and resolution. This work thus not only provides a personalized organic conjugated nano-agent for NIR-II FI, but also highlights the molecular strategy for the development of organic conjugated systems with optimal performance for bio-imaging.

Novel Application of NIR-I-Absorbing Quinoidal Conjugated Polymer as a Photothermal Therapeutic Agent.

Conjugated polymer nanoparticles (CP NPs) that could absorb the first near-infrared (NIR-I) window have emerged as highly desirable therapeutic nanomaterials. Here, a quinoidal-conjugated polymer (QCP), termed PQ, was developed as a novel class of therapeutic agents for photothermal therapy (PTT). Owing to its intrinsic quinoid structure, PQ exhibits molecular planarity and π-electron overlap along the conjugated backbone, endowing it with a narrow band gap, NIR-I absorption, and diradical features. The obtained PQ was coated with a poly(ethylene glycol) (PEG) moiety, affording nanosized and water-dispersed PQ nanoparticles (PQ NPs), which consequently show a high photothermal conversion efficiency (PCE) of 63.2%, good photostability, and apparent therapeutic efficacy for both in vitro and in vivo PTTs under an 808 nm laser irradiation. This study demonstrates that QCPs are promising active agents for noninvasive anticancer therapy using NIR-I light.

A short review on the applicability and use of cubosomes as nanocarriers.

Cubosomes are nanostructured lipid-based particles that have gained significant attention in the field of drug delivery and nanomedicine. These unique structures consist of a three-dimensional cubic lattice formed by the self-assembly of lipid molecules. The lipids used to construct cubosomes are typically nonionic surfactants, such as monoolein, which possess both hydrophilic and hydrophobic regions, allowing them to form stable, water-dispersible nanoparticles. One of the key advantages of cubosomes is their ability to encapsulate and deliver hydrophobic as well as hydrophilic drugs. The hydrophobic regions of the lipid bilayers provide an ideal environment for incorporating lipophilic drugs, while the hydrophilic regions can encapsulate water-soluble drugs. This versatility makes cubosomes suitable for delivering a wide range of therapeutic agents, including small molecules, proteins, peptides, and nucleic acids. The unique structure of cubosomes also offers stability and controlled release benefits. The lipid bilayers provide a protective barrier, shielding the encapsulated drugs from degradation and improving their stability. Moreover, the cubic lattice arrangement enables the modulation of drug release kinetics by varying the lipid composition and surface modifications. This allows for the development of sustained or triggered drug release systems, enhancing therapeutic efficacy and reducing side effects. Furthermore, cubosomes can be easily modified with targeting ligands or surface modifications to achieve site-specific drug delivery, enhancing therapeutic selectivity and reducing off-target effects. In conclusion, cubosomes offer a versatile and promising platform for the delivery of therapeutic agents. In this manuscript, we will highlight some of these applications.

In situ assembly of bioresorbable organic bioelectronics in the brain.

Bioelectronics can potentially complement classical therapies in nonchronic treatments, such as immunotherapy and cancer. In addition to functionality, minimally invasive implantation methods and bioresorbable materials are central to nonchronic treatments. The latter avoids the need for surgical removal after disease relief. Self-organizing substrate-free organic electrodes meet these criteria and integrate seamlessly into dynamic biological systems in ways difficult for classical rigid solid-state electronics. Here we place bioresorbable electrodes with a brain-matched shear modulus-made from water-dispersed nanoparticles in the brain-in the targeted area using a capillary thinner than a human hair. Thereafter, we show that an optional auxiliary module grows dendrites from the installed conductive structure to seamlessly embed neurons and modify the electrode's volume properties. We demonstrate that these soft electrodes set off a controlled cellular response in the brain when relaying external stimuli and that the biocompatible materials show no tissue damage after bioresorption. These findings encourage further investigation of temporary organic bioelectronics for nonchronic treatments assembled in vivo.

Magnetic heating of water dispersible and size-controlled superparamagnetic cobalt iron oxide nanoparticles

Magnetic nanoparticles have been of great interest for various biomedical applications due to their controllability in the distance. Monodisperse superparamagnetic CoFe2O4 (CFO) nanoparticles were synthesized by solvothermal method with oleic acid. The oleic acid ligands are exchanged with citric acid to obtain water-dispersible citric acid-coated CA (CFO–CA) nanoparticles. The M–H curve recorded at room temperature shows the superparamagnetic nature of CFO nanoparticles for both oleic- and citric-coated samples. The magnetic heating performance of CFO–CA shows an exciting dependence on the particle size and surface functionality. The hyperthermia efficiency of CFO–CA nanoparticles increases with increasing magnetic field strength and nanoparticle concentration. A specific absorption ratio value of 152.7 W/g obtained in this study is comparable to other investigations, demonstrating a great potential of CFO–CA nanoparticles for hyperthermia-based treatments. This controlled synthesis process can be applied to various functional biomedical nanoparticles to prepare nanoparticles with designed surface moieties for further potential applications.

Palladium supported on hydrophilic magnetic nanoparticles as a new efficient catalyst in aqueous media✰

Designing efficient hydrophilic catalysts for applying in aqueous media is still a great sustainable processes challenge. In this research, glycerol as a nontoxic and biodegradable chemical was used for preparation of water dispersible magnetic nanoparticles which was applied for stabilization of Pd NPs. Resulting composite (Fe3O4@SiO2-T-G@Pd) was characterized using multiple techniques including FTIR, SEM mapping, TEM, XRD, VSM, and TGA. Hydrophilic property of the Fe3O4@SiO2-T-G@Pd was proved by experiments. This magnetic palladium catalyst showed high catalytic performance in the conversion of nitro compounds to corresponding amines as well as in CC coupling reactions in aqueous media with high efficiency and selectivity. Using this catalyst and NaBH4 as reducing agent, structurally different nitroarenes were reduced to corresponding amines with very good to excellent yields in aqueous media at room temperature. Furthermore, typical Suzuki-Miyaura coupling reaction of 4-bromoanisole with phenylboronic acid was proceeded very well in aqueous media at 60 °C. The magnetically water dispersible catalyst was recycled and reused several cycles in the reduction of nitrobenzene without significant loss in its activity and stability such as confirmed TEM, SEM and XPS analyses.

Luminescent Water-Dispersible Nanoparticles Engineered from Copper(I) Halide Cluster Core and P,N-Ligand with an Optimal Balance between Stability and ROS Generation

The present work introduces the solvent exchange procedure as a route for conversion of the Cu4I4L2 complex, where the Cu4I4 cluster core is coordinated with two P,N-ligands (L), into an aqueous colloid. The analysis of both colloidal and supernatant phases revealed some losses in CuI going from the initial Cu4I4L2 complex to Cu2I2L3-based nanoparticles. The comparative analysis of IR, 31P NMR spectroscopy, ESI mass-spectrometry and luminescence data argued for a contribution of the “butterfly”-like structures of the Cu2I2 cluster core to Cu2I2L3-based nanoparticles, although the amorphous nature of the latter restricted structure evaluation from the PXRD data. The green luminescence of the colloids revealed their chemical stability under pH variations in the solutions of some amino acids and peptides, and to specify the temperature and concentration conditions triggering the oxidative degradation of the nanoparticles. The spin trap-facilitated ESR study indicated that the oxidative transformations were followed by the generation of reactive oxygen species (ROS). The physiological temperature level (310 K) enhanced the ROS generation by nanoparticles, but the ROS level was suppressed in the solution of GSH at pH = 7.0. The cytotoxicity of nanoparticles was evaluated in the M-HeLa cell line and is discussed in correlation with their cell internalization and intracellular oxidative transformations.

Aggregation-Enhanced Photophysical Performance of D-π-A Structured Hemicyanine for NIR-II Fluorescent and Photoacoustic Imaging-Guided Photothermal Therapy

Near-infrared (NIR)-II fluorescence and photoacoustic (PA) dual-model imaging-guided photothermal therapy (PTT) can precisely diagnose and treat tumors and evaluate the therapeutic efficacy in real-time. Herein, we utilized a donor-π-acceptor (D-π-A) structured hemicyanine dye (named M1) with a large conjugated structure and strong intramolecular charge transfer effect and demonstrated that the aggregation of M1 could significantly enhance its photophysical performance by improving its photostability and photothermal conversion capability as compared with M1 in a single molecular state. Furthermore, we prepared water-dispersible NIR-II fluorescent nanoparticles (M1 NPs) by wrapping M1 with DSPE-PEG2000-NH2. The obtained M1 NPs exhibit strong NIR-I absorption and NIR-II fluorescence with their maxima at 734 and 1040 nm, respectively, with a fluorescence quantum yield of 2.84%. Moreover, M1 NPs also exhibit excellent biocompatibility, good photostability, and high photothermal conversion efficiency of 77.5%. In vitro and in vivo experiments reveal that M1 NPs can effectively image tumors through NIR-II fluorescence and PA signals, inhibit DNA replication, trigger cytoskeleton collapse, and eventually induce tumor cell apoptosis under 808 nm laser irradiation. Based on these outstanding properties, the application of M1 NPs in PA and NIR-II fluorescence imaging-guided PTT of tumors is demonstrated.

Re-Examination of the Polymer Encapsulation of Quantum Dots for Biological Applications

The application of semiconductor core–shell quantum dots in biology requires the dispersion of these nanoparticles in water. A widely used phase transfer strategy is their encapsulation with amphiphilic polymers, a method that is believed to preserve the original ligand shell of quantum dots. In this contribution, we test this belief for the first time using a common encapsulation protocol based on poly(styrene-co-maleic anhydride) and ethanolamine and demonstrate that the original quantum dot ligand shell is in fact altered during the polymer encapsulation. In particular, our results show that primary amines, which are typically added to increase the hydrophilicity of the encapsulating polymer, displace the original ligands as a necessary step in the phase transfer process. We demonstrate that the surface of quantum dots synthesized using phosphinic acid as a ligand is readily modified by ethanolamine and hence shows high phase transfer efficiency, whereas quantum dots synthesized using oleic acid ligands did not show reactivity toward the primary amine and failed to transfer in the same conditions. Instead, a thiol, mercaptoethanol, was employed to displace the original oleic acid ligands and promote efficient poly(styrene-co-maleic anhydride) encapsulation. This work also provides practical guidelines for how the quantum dot community can better design and implement phase transfer protocols for a given composition, in order to maximize the efficiency and durability of the resulting water-dispersible nanoparticles for biological applications.

Solvent-Dispersible Nanostructured MIMI: An Experimental and Computational Study

A MIMI (metal–insulator-metal–insulator) nanoparticle was conceived and synthesized. It consists of a core of gold nanoparticles of different shapes, covered by a silica shell in turn covered by a layer of gold and finally by another silica shell. This hybrid nano-matryoshka, completely dispersed in water, was characterized by UV–Vis and TEM spectroscopy, comparing the architecture and photophysical properties of each synthetic step. Through a numerical simulation, it was possible to study in depth the absorption and extinction cross sections, determining the role of the various layers. This is an example of architecture used in the construction of metamaterials, the first in the form of a water-dispersed nanoparticles.