Cooking Water Research Articles

The Influence of Gout Sufferers' Uric Acid Levels On Boiled Water Soursop Leaves (Annona Muricata)

This study sought to ascertain the impact of administering cooked water Soursop leaves (Annona muricata) to gout patients in the village of Plososari Mojokerto on their uric acid levels. This study's design was not experimental. All of the 20 plososari mojokerto individuals with gout made up the study's population. Total sampling is the sample method used in this study. According to the findings of statistical testing, there was a drop in uric acid levels before and after, with 20 (100%) of the respondents having high levels before, 10 (50%) after, and 10 (50%) of the remaining respondents having normal levels. One that results from their excessive consumption of purine-rich foods.

Effect of different cooking methods on S-Alk(en)yl-L-cysteine sulfoxides profile and antiplatelet activity of onion

• Onions are predominant with organosulfur and phenolic compounds endowed with promising functional effects. • Different cooking methods effects on organosulfur composition and bioactivities of onions. • Cooking methods altered the organosulfur content and antiplatelet activity of onions. • Stir-frying cooking was found effective to retain the high amount organosulfur compounds in onion. • Onion extracts showed significant inhibition on collagen-induced antiplatelet activity. Onions are a significant source of organosulfur compounds with promising biological effects. However, the effects of different cooking methods on organosulfur composition and biological properties in onions remain unclear. Therefore, the objective of this study was to determine the composition of organosulfur compounds and the antiplatelet effect of six different onion varieties processed using different cooking methods (boiling, stir-frying, and steaming).The organosulfur compounds were quantified by measuring the S-Alk(en)ey-L-cysteine sulfoxides (ACSOs) contents utilizing and high-pressure liquid chromatography (HPLC). Results showed no significant differences in ACSOs contents among onion varieties. However, ‘Guigum' (GG) and ‘Turbo’ (TB) varieties showed the highest amount of ACSOs at 100.6 and 98.0 mg/100 g fresh weight (FW), respectively. Total ACSOs contents in the other four varieties were 62.7∼72.4 mg/100g FW, showing similar contents. Stir-fried (without the addition of water) onions retained the highest content of total ACSO, followed by steamed treated onions. However, with the boiling method, sulfur compounds were eluted and lost in the cooking water, resulted in a 46.8% loss of ACSOs. Onion extracts showed significant inhibition of the collagen-induced aggregation of rat blood platelets. The highest effect of platelet aggregation was observed in stir-fried onion extracts, whereas the lowest was in boiled extracts. Results demonstrated that stir-frying is an effective cooking method to retain the highest amount of health-beneficial organosulfur compounds in onion.

Effects of different phosphate content on the quality of wheat bran chicken sausage

Introduction. The addition of phosphates improves the emulsifying and gelling properties of meat proteins as well as overall product quality. The effect of phosphate addition on the properties of low-fat chicken sausages containing wheat bran was studied in this article. Materials and methods. Cooking loss, emulsification stability, water distribution, texture and sensory characteristics of wheat bran chicken sausage added with different amounts of complex phosphate were determined. Results and discussion. The positive influence of phosphate addition on technological and textual properties of meat products is known, however taking into account consumer’s acceptability, determination of phosphate content in sausages ensuring their high quality but not but not exceeding this value is needed. Low–fat chicken sausages with increased dietary fiber content due to inclusion in the sausage formulation of wheat bran were used as the object of the study. Comparative characteristics of wheat bran chicken sausage added with different amounts of complex phosphate, namely, 1.0, 1.5 or 2.0 g to 400 g of ground chicken meat were determined. It was shown that the minimum cooking water and fat losses were observed when addition of 1.5 g of complex phosphate was used. Thus, addition of 1.5 g of complex phosphate to 400 g of ground chicken meat ensured better retaining of water and fat, lowest cooking loss and highest emulsifying stability than in cases when 1.0 or 2.0 g of complex phosphate were added. At the same time, the results showed that the sausage containing 1.5 g phosphate per 400 g of ground chicken had the highest hardness, elasticity and chewiness, and the highest overall acceptability score of sensory evaluation, but the difference was not significant (P>0.05). Addition of 1.5 g phosphate per 400 g of ground chicken reduced the fluidity of free water in the sausage, and thus enhanced the water-retaining ability of chicken sausage. In addition, the results of the pseudo-color map showed that the semi-bound water of the S2 and S3 treatment groups increased significantly. Conclusions. Addition of complex phosphate, 0.2 %, in formulation of low-fat wheat bran chicken sausages decreases cooking, moisture and fat losses, and improves the texture and sensory properties of the final product.

데침 시간에 따른 섬쑥부쟁이의 항산화 활성 및 비타민 B2 함량 변화

This study analyzed the changes in total polyphenol and flavonoid contents of Aster glehni based on blanching time and examined the relationships between their contents and antioxidant activities. In addition, vitamin B2 content in green vegetables was determined to use as basic data for the availability of A. glehni. Compared with non-treatment, the total polyphenol and flavonoid contents considerably decreased to 13.05-52.96% and 36.63-81.75%, respectively, with the passage of blanching time (1-5 min). Furthermore, 2,2-diphenyl-1-picrylhydrazyl and 2,2’-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical scavenging abilities considerably decreased with the antioxidant activity. Before blanching, vitamin B2 content in A. glehni was 1.17 mg/100 g of dried sample, and at the blanching time of 3 min, it decreased to 0.60 mg/100 g (less than 50%) of dried sample. Therefore, further research should be conducted on either additives or cooking methods to prevent the leakage of physiologically active substances in the cooking water at the time of blanching A. glehni.

Preparation of Nitrocellulose by Homogeneous Esterification of Cellulose Based on Ionic Liquids

AbstractThe industrial nitrification system of preparing nitrocellulose (NC) adopts nitric and sulfuric mixed acid, which generates a large amount of waste acid and by‐products, and requires a laborious procedure for the stability treatment. In this study, a novel method was developed for the preparation of NC. NC with a nitrogen content of 12.62 % was prepared in 15 min by homogeneous esterification of cellulose based on [Bmim]Cl (1‐butyl‐3‐methylimidazolium chloride). The samples were characterized by FT‐IR, XRD, Raman, XPS, TG‐DSC, GPC, SEM, and elemental analysis. In addition, the activation energy (Ea) was calculated according to the Kissinger method. The burning rate and chemical stability of samples were also tested. The results showed that the NC had 3D honeycomb structure with pores of 200–300 nm diameter, uniform distribution of nitrogen elements, nitrogen content of 12.62 %, and minimum polydispersity index (PDI) of 1.55. The heat of decomposition (Qdec) released by the samples was increased by 141 J/g, the Ea decreased by 16.4 %, and the burning rate increased by 40.5 % when compared with commercially available NC12.6%. The chemical stability was very well only after water cooking. Compared with the conventional method, this method doesn't use sulfuric acid, generates less waste acid, and doesn't produce by‐products such as sulfate esters. The procedure of stability treatment was also very effortless. The costs could also be reduced by the recycling of ionic liquids.

Toxic Metals (Al, Cd, and Pb) in Instant Soups: An Assessment of Dietary Intake.

Instant soups and noodles are one of the most widely consumed commercial food products. These products are made from ingredients of animal (chicken, meat) and/or vegetable origin, in addition to various food additives that prolong the shelf life of the product. It should be noted that instant soups are a dehydrated product, whose water-removal process can increase the accumulation of contaminants, such as toxic metals (Al, Cd, or Pb), that are harmful to the health of consumers. The content of toxic metals (Al, Cd, and Pb) in a total of 130 samples of instant soups of different types (poultry, meat, and vegetables) was determined by ICP-OES (inductively coupled plasma-optical emission spectrometry). The Al content (32.28 ± 19.26), the Cd content (0.027 ± 0.016), and the Pb content (0.12 ± 0.13) in the vegetable soups were worth mentioning. Considering an intake of twenty grams (recommended by the manufacturer), the dietary intake of Al (19.56% of the TWI set at 1 mg/kg bw/week), the intake of Cd (6.59% of the TWI set at 2.5 µg/kg bw/week), and the Pb intake (16.18% of the BMDL set for nephrotoxic effects at 0.63 µg/kg bw/week and 6.84% of the BMDL set for cardiovascular effects at 1.50 µg/kg bw/week) in the population aged 3-10 years, instant soups are not recommended for the population aged 3-10 years, while their consumption does not pose a health risk for adults. However, it is necessary to consider the cooking water used in the preparation of these products, as it may increase exposure to these toxic metals, in addition to the rest of the diet.

Physicochemical, Textural and Sensory Characteristics of Instant Noodles Produced from Wheat and Plantain Flour Blends, Spiced with Ginger

The work was aimed at evaluating the physicochemical, textural, cooking and sensory characteristics of instant noodles produced from wheat and plantain flour blends, spiced with ginger. The unripe plantain was dried to final moisture content of 11.28% (wt/wt) and finely ground into powder. Wheat, plantain and ginger flour were prepared and blended in the following ratios; 100:0:0, 90:10:4, 80:20:4, 70:30:4, 60:40:4, 50:50:4 and labelled WF, WPGF1, WPGF2, WPGF3, WPGF4, and WPGF5, respectively. Increasing levels of unripe plantain flour, caused significant decrease in the whiteness index of the noodles from 77.23 to 57.08. The protein content of the composite noodles decreased from 10.70% (control) to 10.05% for 10% noodle sample. The decrease in the carbohydrate contents of the noodles from 65.27% (Control) to 64.83% for 10 % noodle sample was not significant. Percentage Ash, fiber and fat content of the noodles increased with increase substitution of plantain flour from 1.18 to 2.61, 0.40 to 1.13 and 16.01 to 19.75%, respectively. Cooking time decreased significantly from 4.40 to 3.2 8 while cooking loss and water absorption increased significantly from 5.92 to 10.01% and 9.82 to 13.15% respectively. Unripe plantain increase resulted in significant increase in noodle hardness but to a great extent did not affect noodle springiness, cohesiveness, gumminess, chewiness and resilience. There was no significant difference between the 7.20 and 7.67 values obtained from appearance of cooked noodles for control and 10% composite. Overall acceptability score of 7.80 and 7.60 between control 100% (100:0:0) and 10% (90:10:4) composite noodles were not significantly different. Noodles substituted with 10 % plantain flour is most recommended, with regards to cooking quality, acceptability, textural characteristics and improved nutrient.

From farm to plate: Spatio-temporal characterization revealed compositional changes and reduced retention of γ-oryzanol upon processing in rice.

Antioxidants detain the development and proliferation of various non-communicable diseases (NCDs). γ-oryzanol, a group of steryl ferulates and caffeates, is a major antioxidant present in rice grain with proven health benefits. The present study evaluated the distribution and dynamics of γ-oryzanol and its components in spatial and temporal scales and also delineated the effect of processing and cooking on its retention. Six rice varieties (four Basmati and two non-Basmati) belonging to indica group were analyzed at spatial scale in four different tissues (leaf blades, leaf sheaths, peduncle and spikelets) and temporal scale at three developmental stages (booting, milky and dough). Additionally, the matured grains were fractioned into husk, embryo, bran, and endosperm to assess differential accumulation in these tissues. Further, milling and cooking of the samples was done to assess the retention upon processing. After extraction of γ-oryzanol by solvent extraction method, individual components were identified by UPLC-QToF-ESI-MS and quantified by RP-HPLC. The non-seed tissues were significantly different from the seed tissues for composition and quantitative variation of γ-oryzanol. Cycloartenyl caffeate was predominant in all the non-seed tissues during the three developmental stages while it showed significant reduction during the growth progression toward maturity and was totally absent in the matured grains. In contrary, the 24-methylenecycloartanyl ferulate, campesteryl ferulate and β-sitosteryl ferulate showed significant increment toward the growth progression to maturity. Milling caused significant reduction, retaining only an average of 58.77% γ-oryzanol. Cooking of brown rice in excess water showed relatively lower average retention (43.31%) to samples cooked in minimal water (54.42%). Cooked milled rice showed least mean retention of 21.66%. The results demonstrate prominent compositional variation of γ-oryzanol during different growth stages. For the first time, the study demonstrated that ferulate esters of γ-oryzanol were predominant in the seed tissues while caffeate esters were dominant in non-seed tissues. Basmati cultivars show differential expression of γ-oryzanol and its components compared to non-Basmati cultivars. Cooking in excess water causes maximum degradation of γ-oryzanol. Post-harvest losses due to milling and cooking indicate the necessity of biofortification for γ-oryzanol content in rice grain.

Effect of red beet cooking water on yoghurt's physico-chemical, textural and antioxidant characteristics.

This study aimed to evaluate the effect of red beet cooking (Beta vulgaris L.) water on the quality properties of yoghurts prepared with different levels (2, 4, 8, and 10% w/w) compared to the nature sample. Results showed a decrease in pH value and an increase in titratable acidity (TA), fat content, and dry matter with the increasing red beet cooking water concentration. Consumer test revealed that incorporating 4% (w/w) red beet cooking water into yoghurt influences the product's overall acceptability compared to the other formulations. The addition of red beet cooking water at the level of 4% induces significant increase in gel firmness with a decrease in syneresis compared to the control sample. The lightness and yellowing of the product decreased while the redness increased. Furthermore, the effect of red beet cooking water addition was significant (p < 0.05) on total phenolic contents (0.369 ± 0.024) as well as antioxidant activity (0.140 ± 0.008). Beet cooking water may be a potential ingredient in the formulation of functional products.

Pemanfaatan Tepung Pisang-Singkong Sebagai Alternatif Pengganti Tepung Terigu Pada Pembuatan Mie Dengan Penambahan Putih Telur atau Isolat Kedelai

In general, wheat flour noodles have a chewy and elastic texture, due to the presence of amylose, amylopectin and gluten proteins. People with celiac disease are gluten intolerant, so to enjoy noodles like people in general, an alternative gluten-free flour is needed to replace wheat flour, one of which is banana-cassava flour. To increase the nutritional value and texture of noodles, such as using wheat flour, egg white protein or soybean isolate and xanthan gum or ash water are added. This study aims to determine the effect of adding egg white protein or soybean isolate and the effect of xanthan gum or water ash on banana-cassava flour noodles on the physicochemical and sensory profiles. The research stages are the production of banana-cassava flour noodles, physicochemical profile analysis includes chemical profiles (moisture content, ash content and protein content), physical profile (optimum cooking time, swelling index, cooking loss and water absorption) and gluten content and sensory testing. The results of the analysis showed that the chemical profile of banana-cassava flour noodles met the wet noodle quality standard set by SNI 2987-2015, while the ash content was higher than the quality standard. Some good formulas, the water and ash content in the addition of egg white and xanthan gum (PTX) were around 4.95% and 1.80%, respectively, while the protein content in the addition of soybean isolate and water ash (PKA) was 12.89%. . Physical profiles for cooking time and swelling index on the addition of soybean isolate and water ash (PKA) were 2.50 minutes and 186.10%, respectively, cooking loss on the addition of egg white and xanthan gum (PTX) was 5.85%, while the water absorption in the addition of egg white and water ash (PTA) was 73.95%. Gluten levels in the addition of soybean isolates and water ash (PKA) ranged from 1.10%. The physicochemical profile of banana-cassava flour noodles was influenced by the type of protein and the best formula for gluten-free noodles was the addition of soy isolate. While the ash content, swelling index, water absorption, and gluten content are influenced by the type of agglomerate, and the best formulation for gluten-free noodles is the addition of ash water. The results of the organoleptic test obtained an average score of 4 (out of a scale of 5) on the attributes of color, aroma, taste, texture, and overall preference for the banana-cassava flour noodle sample.

Production of tomato powder from tomato puree with foam-mat drying using green pea aquafaba: drying parameters and bioaccessibility of bioactive compounds.

The purpose of this study was to valorize green pea cooking water (aquafaba) as a foaming agent in foam-mat drying of tomato. For this aim, density of foam-mats (green pea aquafaba+tomato puree) changed between 1.06 and 0.45 g/mL depending on the aquafaba concentration. Foam-mats with 5 mm thickness were dried at 50, 60 and 70°C at 1.3m/s air velocity. The results showed that the porous structure of foams with lower densities resulted in higher drying rates and moisture diffusivities. Redness (a* ) value decreased with increasing aquafaba content (p < 0.05). Total phenolic content (TPC) and antioxidant activity (CUPRAC, DPPH and FRAP) of the resulting tomato powders were also determined. Moreover, bioaccessibility of phenolics and antioxidant activities were also determined using in vitro digestion. All of the bioactive parameters are positively affected by foam-mat drying process. Using aquafaba as a foaming agent accelerated the drying period and improved bioactive characteristics of the powders. © 2022 Society of Chemical Industry.

Effect of Traditional Cooking and Sous Vide Heat Treatment, Cold Storage Time and Muscle on Physicochemical and Sensory Properties of Beef Meat.

Consumers are avoiding the consumption of highly processed foods, aware of the negative effects of the additives or high temperatures used on the biological value of the food. This causes an interest in ways of minimal processing or low-temperature cooking procedures. However, to achieve the desired organoleptic quality, it is necessary to know the relationship between the parameters of the treatments and the type of raw material. The purpose of this study was to investigate the complex effects of traditional cooking and sous vide heat treatment, cold storage time and muscle on the physicochemical and sensory properties of beef. The study material consisted of samples of musculus longissimus thoracis and musculus semitendinosus obtained from beef half-carcasses. The muscles were subjected to traditional cooking in water at 95 °C until the temperature inside the piece reached 65 °C and sous vide treatment at 65 °C for 2 h. The study was performed after 2 and 21 days of cold storage. Instrumental evaluation of texture parameters, color and sensory evaluation of meat was carried out. Meat stored for 21 days was characterized by more favorable TPA test (Texture Profile Analysis) results compared to meat evaluated 48 h post mortem. The study also showed positive effects of sous vide heat treatment on texture parameters and sensory properties (especially on tenderness and palatability), as well as differences in the formation of quality traits between muscles. Given the trends associated with energy-saving technologies, it is desirable to seek the optimal combination of temperature and time of fixation treatments at an acceptable level of quality. The use of low-temperature cooking for as little as 2 h, yields positive results in sensory evaluation of juiciness, tenderness, or palatability.

Active aroma compounds assessment of processed and non-processed micro- and macroalgae by solid-phase microextraction and gas chromatography/mass spectrometry targeting seafood analogs

The odor of four algae was investigated and compared to evaluate the potential of these algae to mimic shrimp aroma. Solid-phase microextraction followed by gas chromatography analysis coupled with sensory analysis was used for performance assessment. The volatile organic compounds were determined in non-processed, raw samples (r), and processed cooked (c) and cooking water (w) samples for two microalgae [Nannochoropsis oceanica (NO) and Tetraselmis chuii (TC)], two macroalgae [Ulva rígida (UR) and Saccharina latíssima (SL)], and shrimp Vannamei cong (SH). The results showed significant differences in the composition of volatile compounds between macroalgae and microalgae. The key odorants in macroalgae were octanal, 2-octenal, nonanal, and β-ionone, and in microalgae were 1,5-octadien-3-ol, hexanal, 2,4-decadienal, 2-octenal, octanal, nonanal, 3,5-octadien-2-one, and terpenes. The PCA analysis of GC-MS data showed odor similarities between the studied samples, which were divided into five main groups: (1) TC(c) and TC(w); (2) TC(r) and NO(c); (3) NO(r), NO(w), and SL(w); (4) SL(c), UR(r), UR(c), and UR(w); and (5) SL(r). The data from the sensory analysis show bigger similarities between the macroalgae and the shrimp odor. Overall, the data provided indicate that the cooking water and cooked samples are very similar in key components of odorants. These features allow the possibility to use algae and their processed resulting products as a shrimp flavor replacement in non-animal-based food formulations, thus decreasing the pressure on seafood crops and aquaculture-associated issues leading to more sustainable livestock. Furthermore, circularity and waste reduction may be further enabled by the use of otherwise wasted cooking water as an odorant agent.

Effects of Glucono-δ-Lactone and Transglutaminase on the Physicochemical and Textural Properties of Plant-Based Meat Patty.

Due to growing interest in health and sustainability, the demand for replacing animal-based ingredients with more sustainable alternatives has increased. Many studies have been conducted on plant-based meat, but only a few have investigated the effect of adding a suitable binder to plant-based meat to enhance meat texture. Thus, this study investigated the effects of the addition of transglutaminase (TG) and glucono-δ-lactone (GdL) on the physicochemical, textural, and sensory characteristics of plant-based ground meat products. The addition of a high quantity of GdL(G10T0) had an effect on the decrease in lightness (L* 58.98) and the increase in redness (a* 3.62). TG and GdL also decreased in terms of cooking loss (CL) and water holding capacity (WHC) of PBMPs. G5T5 showed the lowest CL (3.8%), while G3T7 showed the lowest WHC (86.02%). The mechanical properties also confirmed that G3T7-added patties have significantly high hardness (25.49 N), springiness (3.7 mm), gumminess (15.99 N), and chewiness (57.76 mJ). The improved textural properties can compensate for the chewability of PBMPs. Although the overall preference for improved hardness was not high compared to the control in the sensory test, these results provide a new direction for improving the textural properties of plant-based meat by using binders and forming fibrous structures.

Chickpea cooking water (Aquafaba): Technological properties and application in a model confectionery product

This study aimed at evaluating the techno-functionalities of chickpea cooking water (aquafaba, AF) produced from dry chickpeas, and investigating its application in a model confectionary product. Pasteurized egg white (EW) was used as the reference sample. The addition of guar gum (GG; 1% of AF) and acidification with lactic acid (LA; down to pH 4) were explored to enhance AF foaming capacity and stability. The presence of GG hydrocolloid helped increase foam (F) stability (i.e., F_AFGG showed no syneresis in comparison to the 27% of F_AF) and hardness (+92% than F_AF), while acidification doubled overrun. Significantly (p < 0.05) different foaming stabilities (i.e., syneresis, geometrical indices and air bubble coalescence) up to 120 min at 6 ± 2 °C were evidenced according to the foaming agent used. The technological properties of meringues made by using the different foaming agents and sucrose (ratio 1:1.64 w/w) were also investigated. The presence of hydrocolloid resulted in the highest whipped batter density (0.59 g/mL) and the lowest baking loss (30.6%) associated with intermediate water activity (0.398) and moisture content (2.40g/100g) but the lowest height (13.1 mm). Conversely, acidification improved AF performance in terms of meringue height (17 mm) and texture (3.24*10−3 J). This study proved that AF, a recycled ‘waste’ product, possesses interesting technological properties - further enhanced by adding GG and LA - useable for plant-based food applications.

Physicochemical and Sensorial Characterization of Artisanal Pasta from the Occitanie Region in France.

Artisanal pasta made from wheat or underutilized cereal flours has grown in popularity with the expansion of the local and short food chains. Artisanal pasta makers do not use the same raw materials or production processes, leading to great variability in the final product. The purpose of the study is to determine the physicochemical and sensory characteristics of artisanal pasta made from durum wheat flour. Seven brands of fusilli pasta manufactured in the Occitanie region (France) were selected and analyzed in terms of their physicochemical composition (protein and ash content in dry samples), cooking properties (optimal cooking time, water absorption, and cooking loss), sensory characteristics (Pivot profile), and consumer appreciation. Differences in the physicochemical characteristics of the dry pasta samples partly explain the variations in pasta characteristics measured after cooking. The Pivot profile varied among pasta brands, but no major differences in hedonic properties were identified. To our knowledge, this is the first time that artisanal pasta made from flour has been characterized in terms of its physicochemical and sensory properties, which highlights the diversity of products on the market.

Development and characterisation of structurally reforming engineered flat‐rice xerogel for hot water cooking

SummaryShape transforming foods are an emerging area of interest that could be customised according to consumer needs with the desirable structure and reduced package space. The current work aims to investigate the shape transformation behaviour of a 2D xerogel developed from rice hydrogel at the concentration of 4% and 90 °C. This flat xerogel is coated with ethyl cellulose as constraint material in the form of linear equally spaced strips. Immersing the xerogels in hot water over a temperature of 70 °C, resulted in a 3D transformation of the discs in 12 s (Video S1). The transformation is achieved owing to xerogel's increased swelling power (0.27–0.78) due to the anisotropic nature. This is confirmed by the SEM images of top (smooth) and bottom (rough) xerogel. In order to characterise the process of shape transformation bending analysis was done wherein a significant difference in bending angle (35.86–63.10°), height (24.73–50.26 mm), curvature (0.57–2.38 μ mm−1) and end‐to‐end distance (118.23–15.11 mm) from 2 to 12 s. The formed 3D shape was similar to the commercial tubular (penne) pasta. This study opens up the utilisation of less concentrated rice xerogel in shape transformation for designing engineered food.

Effect of Gamma Irradiation on Shelf Life, Nutritional, and Glycemic Properties of Three Indian Brown Rice Varieties

Brown rice (whole grain, BR) has lower glycemic index (GI), is a healthy replacement for white rice (WR). However, BR has a short shelf life, is susceptible to pest infestation. Gamma irradiation is a safe approach to prevent the latter. This study examines effect of gamma irradiation on the physical, cooking, nutritional, shelf life and glycemic properties of three Indian parboiled BR. Parboiled BR of ADT-43, BPT-5204, and Swarna rice varieties were packed in polyester and polypropylene pouches (60 µ thickness) and subjected to gamma irradiation [750–820 Gy] (IR). Appropriate controls without irradiation (NIR) were maintained. Irradiation did not induce major changes in the physical and nutritional properties, except for resistant starch which significantly increased after irradiation in ADT-43 and BPT-5204. Irradiation reduced the cooking time, increased loss of solids in the cooking water and decreased apparent water uptake (particularly in BPT-5204). IR varieties exhibited longer shelf life (8–9 months) compared to 6 months shelf life of NIR varieties. The shelf stability of IR Swarna rice was superior in terms of delayed rancidity development compared to all other rice. All BR samples exhibited the ranking of ‘like moderately’ in the sensory acceptability tests at 6 months of storage and scores decreased subsequently. Irradiation did not affect GI [all showed medium GI, except a high GI for IR BPT 5204] and helped in shelf life extension of parboiled BR by preventing insect infestation.

Inulin from Globe Artichoke Roots: A Promising Ingredient for the Production of Functional Fresh Pasta.

Globe artichoke roots represent an alternative and sustainable source for inulin extraction and are well-noted for their technological and functional properties. Therefore, the aim of our study was to exploit inulin with high degree of polymerization as a replacement of durum wheat semolina for the production of functional fresh pasta. The effect of increased level of substitution (5, 10, 15%) on cooking, structural, sensory, and nutritional properties were evaluated and compared with a control sample consisting exclusively of durum wheat semolina. Inulin addition caused changes to internal structure as evaluated by scanning electron microscopy. The enriched samples showed a lower swelling index, an increasing cooking time, and values of cooking loss (2.37–3.62%), mainly due to the leaching of inulin into the cooking water. Cooked and raw enriched pasta was significantly darker and firmer than the control, but the sensory attributes were not negatively affected, especially at 5 and 10% of substitution levels. The increase of dietary fiber content in enriched pasta (3.44–12.41 g/100 g) resulted in a significant reduction of glycaemic index (pGI) and starch hydrolysis (HI). After gastrointestinal digestion, inulin-enriched pasta increased prebiotic growth able to significantly reduce E. coli cell density.

Effects of concentration methods on the characteristics of spray‐dried black soybean cooking water

SummaryLegume cooking water (CW) is a food by‐product with the potential of becoming a plant‐based egg white replacement; however, limited research has been performed on processes to propel its industrialisation. Consequently, this study assessed the impact of concentration methods (thin‐film evaporation; cryoconcentration [CC]; and stove‐top boiling [BL]) on the composition and characteristics of spray‐dried CW powders. CW was concentrated from 6.8 to 22 °Brix. Subsequent analyses showed that the powder characteristics were an outcome of their particle size and composition. CC powders with 18.56 ± 0.85% protein and D50 = 0.14 ± 0.01 μm presented the lowest‐performing functionality. Conversely, BL powders (25.13 ± 0.50% protein and D50 = 3.70 ± 0.47 μm) displayed enhanced emulsification and foaming. Hence, the properties of CW improved with thermal concentration. These results lay the ground for selecting and optimising a concentration procedure aiming to industrialise the production of CW.