Water For Consumption Research Articles

Influence of climate change on water quality in Terra Nova River basin, Pernambuco, Brazil

Climate changes tend to intensify water scarcity in arid and semi-arid regions, making water management in these areas more challenging, directly influencing hydrological dynamics, causing impacts on ecosystems and society. The Terra Nova River basin is crucial for the water security of the semi-arid region of Pernambuco, especially after the construction of the São Francisco River Integration Project (PISF), which saw the construction of six reservoirs to supply water for human consumption, agricultural, and industrial activities. Therefore, this study aims to analyzes the impacts of climate changes on water quality in the Terra Nova River basin in Pernambuco, using long-term data from the Hydrological Response Unit System for Pernambuco (SUPer). The ARIMA (Autoregressive Integrated Moving Averages) model is employed to predict water quality parameters in climate change scenarios, using data from the Intergovernmental Panel on Climate Change (IPCC) and the Oswaldo Cruz Foundation (Fiocruz). The variables include air temperature, precipitation, dissolved oxygen, nitrogen, and phosphorus. Simulated scenarios were compared with CONAMA No. 357/2005 limits, revealing potential decreases in dissolved oxygen and phosphorus concentrations, alongside an increase in nitrogen concentrations. Irregular rainfall rates, high air temperatures, and evapotranspiration, combined with conflicts by water resources, may exacerbate water access issues in the semi-arid region, worsening the water crisis and threatening water security.

Multivariate statistical analysis as a tool for monitoring drinking water sources in an Atlantic Rainforest Conservation Unit.

Water quality monitoring is paramount in identifying and mitigating pollution sources, protecting aquatic ecosystems, and ensuring safe water for human and wildlife consumption. This study is aimed at evaluating the quality of drinking water sources in three communities located in a Sustainable Use Conservation Unit in the municipality of Mangaratiba, Rio de Janeiro, Brazil, employing a multivariate statistical analysis. A total of 161 water samples were collected from January to December 2022, encompassing 32 surface water and 129 tap water samples. Physicochemical parameters were determined in situ employing a Horiba U50 multiparameter probe. The samples were stored and transported at 4°C to the laboratory for microbiological analyses concerning total coliforms and Escherichia coli using a commercial enzymatic test. All samples contained coliforms, while E. coli were detected in 87% of the samples. The multivariate analysis indicated that the microbiological water quality in sampling region R2 was influenced by rainy periods and that, in general, the water quality within R3 was the most affected by the transport of solids to the water sources. The statistical methods applied herein aided in characterizing the study areas and detecting points of attention regarding physicochemical and microbiological parameters that significantly influence the water quality of each sampling point. Representative points for each study region were identified and may be employed for future monitoring and prevention actions.

Bottled or Tap Water? Factors Explaining Consumption and Measures to Promote Tap Water

The production and consumption of plastic bottled water have several negative environmental impacts worldwide. To identify the barriers and motivations for drinking tap and bottled water, we conducted a nationally representative questionnaire survey among 3411 respondents in the Czech Republic in 2022. People aged 18–34 are moderate consumers of bottled water and very frequent consumers of tap water. Bottled water consumption tends to be less frequent among people with a higher education, while tap water consumption is less frequent among people with lower incomes. The most important factors that explain the frequency of drinking bottled and tap water are taste perception, health concerns and habit. Health concerns about tap water and the unpleasant taste of tap water increase the consumption of bottled water. People with a strong habit of drinking tap water are less likely to consume bottled water. The constructs from the theory of planned behaviour were statistically significant. The results can guide decision-makers in promoting tap water to consumers. To encourage tap water drinking, we suggest measures to increase the availability of tap water in public places in conjunction with campaigns targeting the taste and health perception, as well as the habit, of drinking tap water.

Aerodynamic analysis and hygrothermal transfer characteristics of cellulose evaporative cooling pads: A case study applied to protected agriculture

Evaporative cooling pads are clean media for cost-effective temperature management. However, the spatially integrated microclimate resulting from heat and mass transfer in the evaporative cooling pad is an uncertain and nonlinear complexity. Therefore, this purpose of this study is to present an innovative prediction model with computational fluid dynamics and evaluate the operating scenarios and geometrical properties of wet pads from quantitative metrics such as saturation efficiency and pressure drop. The reliability of the established numerical model of wet pads was verified by wind tunnel experiments and existing experiments, which predicted the outlet conditions in satisfactory conformity. The results showed that a wet pad with 8 mm ripple height and 19.6 mm ripple distance exhibits the best prospective, with energy consumption and specific water consumption reduced by 45.28 % and 26.26 %, respectively. Meanwhile, the cross strategy of 45_45° corrugation obliquity reduces the pressure drop by 18.95 %, providing uniform supply air distributions. The heat exchange of the wet pad is mainly concentrated within the first 35 mm from the inlet section, while the mass exchange of the wet pad is concentrated within the first 60 mm. The range of frontal air velocity with 0.9–2.5 m/s is recommend for the evaporative cooling system.

Digital Twin Technology and Social Sustainability: Implications for the Construction Industry

To date, a plethora of research has been published investigating the value of using Digital Twin (DT) technology in the construction industry. However, the contribution of DT technology to promoting social sustainability in the industry has largely been unexplored. Therefore, the current paper aims to address this gap by exploring the untapped potential of DT technology in advancing social sustainability within the construction industry. To this end, a comprehensive systematic literature review was conducted, which identified 298 relevant studies. These studies were subsequently analysed with respect to their use of DT technology in supporting social sustainability. The findings indicated that the studies contributed to 8 of the 17 UN Sustainable Development Goals (SDGs), with a strong focus on SDG11 (77 publications), followed by SDG3 and SDG9, with 58 and 48 studies, respectively, focusing on promoting health and well-being and fostering resilient infrastructure and innovation. Other contributions were identified for SDG13 (30 studies), SDG7 (27 studies), SDG12 (26 studies), SDG4 (21 studies), and SDG6 (11 studies), covering areas such as climate action, responsible consumption, affordable energy, quality education, and clean water and sanitation. This paper also proposes future research directions for advancing DT technology to further enhance social sustainability in the construction industry. These include (i) enhancing inclusivity and diversity, (ii) workforce safety and well-being, (iii) training and skill development, (iv) policy and regulatory support, and (v) cross-disciplinary collaboration.

Physiological costs of warning: Defensive hissing increases metabolic rate and evaporative water loss in a venomous snake

To minimize predation risk and the cost of confronting predators, prey have developed a range of defensive strategies and warning signals. Although advantageous, defensive warnings may also induce physiological and energy costs to the emitter. Ventilatory sounds (hissing) are the most distributed warning sound in vertebrates. Because they involve the respiratory apparatus, defensive hissing may substantially increase evaporative water loss. Herein, we examined the determinants of hissing as well as its physiological costs in a medium-sized venomous snake, the long-nosed viper (Vipera ammodytes). We first used a neutral arena and applied standardized stimulation to measure the occurrence and acoustic characteristics of warning hissing. Then, we used open-flow respirometry to quantify changes in respiratory gas exchanges (oxygen consumption and evaporative water loss) during defensive responses. We demonstrated that males are more likely to engage in sound warnings when stimulated. Expirations generated the strongest signals compared to inspiration but did not differ between sexes. We found that defensive hissing dramatically increased average metabolic rate and evaporative water loss during the 10-minute stimulation period, and this effect was more pronounced in males. Metabolic rates and evaporative water loss were closely related to the duration of hissing. Overall, our results indicate that respiratory-based warning sounds induce significant physiological costs and may alter water balance. The higher responsiveness in males than females likely reflects sexually selective pressure (higher mobility for mate acquisition) and enhanced risk exposure.

Seasonal and depth-dependent thermoregulatory benefits of burrows for wombats – the largest burrowing marsupials.

Mammals use burrows to behaviourally thermoregulate, save water and avoid predation. The advantages of burrows vary not only seasonally but also with burrow depth. To quantify these effects, we used biophysical ecological models, which predict an animal’s energetic and hydric costs within a characterised microclimate. For Australia’s three extant wombat species we quantified variation in the energetic advantage of burrows spatially, temporally, and with burrow depth. We simulated resting wombats with different traits (e.g., body size, fur) in different microclimates (above ground and burrows of varying depth) at six sites across Australia, two for each wombat species, over five years (1980, 1990, 2000, 2010, 2020). We assessed time spent within their thermoneutral zone—heat production equals heat loss thus minimising energy and water expenditure —and frequency of extreme heat stress (i.e., no viable hydric solution for the conditions stipulated). Our findings show that burrows are essential for reducing energetic and hydric costs and for survival during the hottest season in areas with no shade, e.g., the semi-arid zone. We found no evidence that extreme heat stress has increased temporally i.e., due to climate change, but it was frequently predicted in shallow burrows in 2020, having rarely been previously forecast. For energy requirements, we found lower thermoregulatory costs for deeper burrows in the cold season and for shallow burrows in the hot season. This work underscores the critical balance between wombat survival, burrow utility, and environmental dynamics, offering new insights into mechanisms that dictate mammal behaviour from a thermoregulatory perspective.

Assessment of Animal Drinking Water Quality in Livestock Farms in Galapagos Islands

The purpose of this research was to determine the quality of water for bovine consumption on livestock farms in the El Progreso parish - Galapagos by applying a quality index following the Brown methodology proposed by the National Sanitation Foundation of the United States. Information was collected from the livestock farms through a socio-environmental diagnosis of the area, where five localities were considered: San Joaquín, Las Goteras, Cerro Verde, Puerto Chino and El Progreso from which fifteen livestock farms were selected for the respective sampling of the sources. of water. Therefore, nine parameters were considered for the analysis of the respective water sources: pH, TDS, Fecal Coliforms, electrical conductivity, hardness, nitrites, phosphates, temperature and turbidity. Of the total livestock farms monitored, three of them presented a rating of Good quality in a range of 70 to 90, while the remaining farms recorded values with a Medium classification, which are those that recorded AQI values between 51 to 70 according to the criteria established by the NSF. This research highlights the importance of frequently carrying out analyzes of the water sources from which cattle drink to determine the quality of the resource, and also provide technical advice to ranchers in the area on the management and cleaning of the reservoirs.

INTEGRATING LAND USE ANALYSIS WITH WATER DEMAND ESTIMATION: A CASE STUDY OF PUTRAJAYA, MALAYSIA

The challenges posed by population growth, urbanization, and changing land use patterns on sustainable water resource management are significant. This paper puts forth an integrated framework aimed at assessing future water demand in Putrajaya, Malaysia. The proposed framework combines population projections, estimations of water demand, and analyses of land use activities. Through an examination of demographic trends and land use patterns, the framework predicts population growth and identifies areas with high water demand. Daily water use patterns in homes and businesses (temporal analysis) inform the designing future water infrastructure, incorporating temporal aspects. Statistical and spatial analysis techniques are then utilized to merge these projections with water demand estimations to quantify water requirements in various zones and types of land use. This study has unveiled two daily peaks in water demand, which align with household schedules. Residential areas emerge as the primary consumers of water, displaying an evening peak distinct from the midday peak seen in businesses. The current water demand in Putrajaya is estimated at 94 million litres per day, with domestic usage surpassing non-domestic usage in a ratio of 3:2. Projections based on future land use plans foresee a 19% increase in demand, underscoring the urgency for proactive water management strategies. Spatial analysis has highlighted residential areas as the main users of water, with demand levels varying throughout the city. By comprehending these temporal and spatial patterns, water authorities can strategically target interventions, optimize infrastructure siting, and forecast future demand trends. These proactive measures are essential for securing a sustainable water future for Putrajaya.

Efficient biodecolorization of direct black 22 Azo Dye by Aspergillus tamarii Kita UCP1279 isolated from caatinga soil

The textile industry is a major consumer of water, generating large volumes of wastewater contaminated with harmful substances, particularly azo dyes, which contain aromatic rings, amines, and sulfonic groups that contribute to their environmental toxicity. The use of microbial agents for wastewater treatment offers a cost-effective and sustainable solution, minimizing sludge production. Fungi from the Caatinga biome have demonstrated potential for bioremediation, especially under extreme environmental conditions. This study explores the ability of Aspergillus tamarii Kita to decolorize the azo dye Direct Black 22 (DB22) under varying conditions, including the use of both active and inactive fungal biomass, in static and agitated systems (120 rpm), at a controlled temperature of 30°C. Dye concentrations of 50, 125, and 250 mg/L were evaluated over time intervals of 75, 180, and 180 minutes, respectively. The influence of dissolved oxygen concentration and redox potential on the decolorization process was also investigated to identify optimal treatment conditions. Decolorization efficiency was quantified via spectrophotometric analysis. Results revealed decolorization rates of 100%, 97%, and 63% for the respective dye concentrations, with active biomass in agitated conditions achieving the highest removal rates. The study further demonstrated that dissolved oxygen levels and redox potential are critical factors in enhancing dye decolorization. These findings underscore the bioremediation potential of Aspergillus tamarii Kita in treating textile dye effluents, offering a promising approach to sustainable industrial wastewater management.

Bacteriological Evaluation of Drinking Water Quality from Kabul University Taps

Human health is significantly affected by poor-quality drinking water, and water-borne diseases are of the most significant concern. A wide variety of microorganisms contaminate drinking water. Water consumers face substantial challenges due to these pollutants and harmful bacteria. To evaluate the microbiological quality of drinking water samples from different places to identify and count Escherichia coli and Coliform bacteria, multiple tube fermentation technique tests (most likely 100 ml) were used. Bacteria were identified using their morphological, biochemical, and cultural characteristics. Sixty tap water samples were collected from different locations at Kabul University. Of these, 36 samples (60 %) were positive for E. coli and Coliform bacteria, and 24 (40 %) were negative. Girls’ and boys’ dormitories showed the highest bacterial contamination level among the multiple positive water samples collected from different locations. Thirty-one samples (86.1 %) of the water were contaminated with Coliform, and five (13.8 %) samples revealed contamination with E. coli. Therefore, it is suggested that all drinking water sources should plan and carry out regular bacteriological evaluations, water supply monitoring, regular treatment, and adequate sanitation.

GROUNDWATER POLLUTION SOURCE USING PRINCIPAL COMPONENT ANALYSIS IN GUELMA PLAIN, NORTHEAST ALGERIA

This study was conducted in the agricultural region of Guelma, located in northeastern Algeria, where groundwater is the main source of water for human consumption, agriculture, and industry. The objective was to characterize groundwater quality and identify potential pollution sources using multivariate statistical methods, including Principal Component Analysis (PCA), correlation matrix, and the Piper diagram. The analyses revealed strong correlations between certain ions, such as sodium and chloride, suggesting carbonate dissolution processes, such as calcite and dolomite, leading to increased water hardness. The Piper diagram allowed for the classification of water types based on the relative concentrations of major cations (Ca²⁺, Mg²⁺, Na⁺+K⁺) and anions (Cl⁻, SO₄²⁻, CO₃²⁻+HCO₃⁻), showing a predominance of mixed hydrochemical types influenced by both natural and anthropogenic processes.PCA then simplified the interpretation by identifying the most influential variables that could serve as key indicators for the continuous monitoring of water quality. Overall, the results indicate that groundwater chemistry in this region is strongly influenced by human activities and local geological conditions, highlighting the need for sustainable management and continuous monitoring to protect this vital resource.

Optimization of Purchase Decisions: A Segmentation, Targeting, and Positioning Approach at AMIU Malabo Depot

This study investigates how marketing strategies—specifically segmentation, targeting, and positioning—affect consumer decision-making when purchasing refill drinking water at AMIU Depot Malabo, Parepare. Utilizing a quantitative research approach, the study employs various data collection methods, including direct observation, conversations with respondents, distributing questionnaires, and reviewing documents. Participants were selected incidentally from consumers at AMIU Depot Malabo. The findings indicate that both segmentation and targeting have a significant effect on purchasing decisions, while positioning does not appear to have a substantial impact. However, when considered together, these three strategies significantly influence purchasing behavior. Additional analysis shows that the independent variables account for some variation in consumer purchasing decisions. To enhance understanding, it is recommended that future research explore other factors that might affect the decision-making process for refill drinking water consumers.

Improving Water Efficiency Through Channel Lining - A Case Study of the Birinchiguri Runoff Irrigation Project in Assam, India

Water is the most essential commodity for human beings to be alive and so it is very necessary to make proper use of water without wasting it. Irrigation sector is the biggest consumer of water as more than 80% of available water resources in India is being presently utilized for irrigation purposes. However, the average water use efficiency of irrigation projects in the country is assessed to be only of the order of 30 to 35%. In the north eastern region also, performance of the existing irrigation schemes suffer from low water use efficiency due to distribution losses and poor operational maintenance and management and results in non - availability of water in the tail ends. Again, water demand for various purposes namely irrigation, drinking, domestic, power, industrial and other uses is increasing day by day leading to severe seasonal stress on water resources in the region. Its scarcity is more pronounced with increasing population and needs. In the present study, the water use efficiency of the Birinchiguri Flow Irrigation Project is determined as per methodology given in the guidelines for computing the Water Use Efficiency of the Irrigation Projects, Central Water Commission (CWC), February, 2014. It has also been attempted to analyze the scope of improvement of water use efficiency of the same.

Determination of Water Quality Index of Drinking Water in Aligarh District, UP, India

Water is perhaps the most precious natural resource after air. Though the surface of the earth is mostly consists of water, only a small part of it is usable, which makes this resource very limited. This precious and limited resource, therefore, must be used with prudence. As water is required for different purposes, the suitability of it must be checked before use. Nowadays fresh water cannot be used directly for drinking purposes due to contamination and pollution. So treatment is used before it is used for drinking or for industrial processes. Also, sources of water must be monitored regularly to determine whether they are in sound health or not. Poor condition of water bodies are not only the indictor of environmental degradation, it is also a threat to the ecosystem. In industries, improper quality of water may cause hazards and severe economic loss. Thus, the quality of water is very important in both environmental and economic aspects. Thus, water quality analysis is essential for using it in any purpose. The quality of water depends upon its source of history. The history of water signifies the terrain through which water is flowing, its origin and most important the extent to which it is contaminated on its way by impurities, sediments and industrial waste. The solubilisation and fragmentation of the terrain through which it flows determines its quality. The extent of dissolved solid materials present in water decides its quality. Such quality is also decided by the solubility of the geological deposits, contact of water with sediments, time of interaction and special factors related to environment. To ascertain suitability of water for consumption, it is necessary to undertake examination of quality of water. . Major information on the quality of water is obtained by physical examination. considered in the present paper for calculating the WQI such as pH, Total alkalinity, Calcium, Magnesium, Chloride, Sulphate, Nitrate and also calculated the seasonal variations of physio- chemical parameters of water quality of Aligarh District.

Assessing water quality and human health risk near coal mines and industrial area of Singrauli, India: special emphasis on toxic elements.

Water contamination is a major environmental issue, especially in rapidly growing industrialized areas like Singrauli. This study addresses research gaps regarding the hydrochemical characterization, health risk assessment, and source identification of contaminants. Hydrochemistry shows the concentrations of Na+, Ca2+, F-, Mn, As, Mo, Sr, and Ni were above the permissible limit for drinking usage. Water quality index (WQI), heavy metal pollution (HMPI), and evaluation indices (HMEI) revealed As, Mn, Cd, Mo, Co, and Ni were the key heavy elements contributing towards aqueous media pollution in the Singrauli area. Additionally, F was also considered one of the major contaminants. In health risk assessment, the higher values of hazard quotient (HQ) for non-carcinogens were associated with Mn, As, Mo, and F; and hazard index (HI) values > 1 were found in 70% and 55% of samples for children and adults, respectively. Carcinogenic risk (CR) for human health was associated with As. CR values in 56.7% (for adults) and 61.7% (for children) of the total samples exceeded 1 × 10-4. Monte Carlo simulation was applied and highlighted the significant risk factors responsible for both carcinogenic and non-carcinogenic health impacts. 19.2%, 7.3%, and 6.9% of the simulated HQ values for adults and 30.1%, 16.9%, and 10.6% for children were above the safe limit for F, As, and Mn, respectively. Additionally, only 43.8% and 24.8% of the simulated HI for adults and children were within the safe limit. Irrespective of age groups, all the simulated values of As in CR were above 1 × 10-6; and 60% (for adults) and 77.1% (for children) of the values were above 1 × 10-4. This outcome emphasizes the urgency of pollution control measures, especially for As, F, and Mn, to safeguard public health. Moreover, a multivariate statistical approach revealed that both geogenic and anthropogenic sources were responsible for contamination. Therefore, regular monitoring, filtration, and purification are mandatory to ensure safe drinking water for human consumption.

Detection and Measurement of Bacterial Contaminants in Stored River Water Consumed in Ekpoma

This study was conducted in Ekpoma, a town dependent on rainwater and river water from nearby areas because of a lack of groundwater sources, and the physicochemical and bacteriological (heterotrophic plate count [HPC], total coliform count [TCC], and fecal coliform count [FCC]) properties of 123 stored river water samples grouped into five collection districts (EK1 to EK5). The results were compared with regulatory standards and previous regional studies to identify water quality trends. While most physicochemical properties met drinking water standards, 74% of samples had pH values > 8.5. Twenty-seven samples were fit for drinking, with EK4 having the highest number of bacterio-logically unsuitable samples. Ten bacterial species were identified, with Gram-negative short-rod species such as Escherichia coli, Klebsiella pneumoniae, and Salmonella typhimurium being predominant. HPC values varied from 367 × 10⁴ to 1320 × 10⁴ CFU/mL, with EK2 (2505 × 10⁴ CFU/mL) and EK5 (1320 × 10⁴ CFU/mL) showing particularly high counts. The TCC values ranged from 1049 × 10⁴ to 4400 × 10⁴ CFU/mL, and the FCC values from 130 × 10⁴ to 800 × 10⁴ CFU/mL, all exceeding WHO limits (1.0 × 102 CFU/mL). Historical data show no improvement in water quality, emphasizing the need for individuals to treat water properly before consumption. The findings provide baseline data for local water authorities and serve as a wake-up call for adequate water treatment, storage interventions, and community education on water security. Additionally, this study offers a practical process for improving the quality of water stored in similar regions.

Study of Escherichia coli, EPEC, ETEC AND STEC, in water offered in schools in a municipality with low human development index in Maranhão State, Brazil

This study examined the EPEC, ETEC and STEC pathotypes in E. coli isolates from water supplied to schools in a municipality in Maranhão, Brazil with a low human development index. For this, 57 bacterial strains isolated from 19 water samples were used. All strains were confirmed as belonging to the E. coli species, by Gram staining and phenotypic tests. From pure cultures of E. coli, DNA was extracted followed by characterization of the isolates by polymerase chain reaction (PCR). This is the first study carried out in the state of Maranhão on the research of the diarrheagenic strains EPEC, ETEC and STEC in water for human consumption offered in schools, with the detection of virulent genes characteristic of enterotoxigenic E. coli (26.31%; n = 15/57) and E. coli producing Shiga toxin (8.78%; n= 5/57). Of the strains identified, 8.78% (n= 5/57) corresponded to combinations of est + stx1 genes. It is concluded that the detection of the diarrheagenic strains ETEC and STEC in E. coli isolates from water samples for human consumption indicates that, in addition to the water being contaminated, it harbors strains with pathogenic potential to cause diarrheal infection in its users. Keywords: ETEC, school environment, STEC.

Long-term analysis of drinking water quality in poultry and pig farms in Northwest Germany

Hygienically safe drinking water is essential for the health, well-being, and efficient production of livestock. In contrast to drinking water for human consumption, there are guidelines but no legal limits for drinking water for animals. Risk factors due to hygienically relevant microorganisms or chemical compounds in drinking water are known from literature, but there is little information on the quality of drinking water for livestock in Germany. To gain an overview of the quality of drinking water, data from samples collected from pig and poultry farms in Northwest Germany over a 10-year period were analyzed retrospectively. Data consisted of 326 samples analyzed chemically, and 519 samples analyzed microbiologically. Of these, 80 water samples were analyzed for both chemical and microbial contaminants. There was no correlation between samples exceeding chemical and microbial guideline levels. The number of samples exceeding the chemical guideline values (58.0%) was higher than the number of samples exceeding the microbiological guideline values (47.4%). This long-term study illustrated the potential risk to pigs and poultry from drinking water and highlights the need for effective hygiene measures to prevent the transmission of microorganisms and chemicals residues through water to maintain animal health and safe food products.

Profile and Different Approaches for Size Characterization of Microplastics in Drinking Water from the Lisbon Water Supply System.

Microplastics (MPs) contribute to the overall pollution of water sources, affecting not only aquatic ecosystems but also water for human consumption (WHC). Currently, there needs to be a global consensus on safe levels of microplastics in WHC, which will allow regulatory efforts and risk assessments to be carried out. Therefore, this study aims to characterize MP particles in WHC of the Lisbon water supply system (LWSS) and compare two approaches to quantify these particles (length and width of the particles, and the area equivalent diameter (AED) of the particles). The quantification of MP particles was made via micro-FTIR (Fourier Transform Infrared Spectroscopy) on transmission mode after water filtration on 5 µm silicon filters. Thirty-eight WHC samples from the LWSS showed MPs up to 836 MPs/L, with an average value of 196 MPs/L. The most representative polymer was polyethylene (PE, 77.2%). The other eight polymers were also quantified. The length and width of MPs ranged between 84 µm and 41 µm, respectively. The AED of MPs ranged between 24 µm and 405 µm. The MP dimensions of both approaches can differ significantly.