Cellulosic Waste Research Articles

A readily accessible quaternized cellulose filter paper with high permeability for IgG separation

Anion-exchange chromatography (AEC) is recognized as a highly effective approach for the purification of immunoglobulin G (IgG). This study introduces an innovative strategy that employs waste cellulose filter paper in the production of AEC media. A quaternized cellulose fiber membrane (CFM-QCS) was successfully fabricated that cellulose fibers were as a structural framework, glutaraldehyde (GA) as a crosslinking agent, and quaternary chitosan (QCS) as a modifying agent. Morphological and chemical characterization revealed that GA and QCS were uniformly crosslinked on the surface of the cellulose fibers, resulting in excellent mechanical properties in both dry and wet states. Benefiting from its 3D network scaffold structure, CFM-QCS demonstrated a high adsorption capacity for bovine serum albumin (BSA), with static and dynamic adsorption capacities of 605.15 mg/g and 88.63 mg/ml, respectively. After treated with extreme conditions and 10 cyclic adsorption and elution, the adsorption capacity of CFM-QCS remains almost unchanged, highlighting its excellent stability. Additionally, a CFM-QCS packed chromatography column exhibited high flux of 10.38 L/h at 0.1 MPa, which can efficiently separate IgG from a mixed solution in the presence of BSA and IgG by gravity-driven. This work presents a straightforward approach for preparing high-performance ion-exchange chromatography membranes for IgG separation.

Valorization of Cellulosic Waste from Artichoke for Incorporation into Biodegradable Polylactic Acid Matrices.

This study presents the development of ecological compounds using polylactic acid (PLA) and artichoke flour with the aim of obtaining materials with properties like commercial PLA. PLA biocomposites with different concentrations of green artichoke (HV) and boiled artichoke (HH) (1, 3, 5, 7, 10 and 20% by weight) were manufactured through an extrusion and injection process. Structural, mechanical, physical and color tests were carried out to analyze the effect of lignocellulosic particles on the biopolymeric matrix. The Shore D hardness, elongation at break and heat deflection temperature (HDT) of the PLA/HV and PLA/HH samples showed similar values to pure PLA, indicating that high concentrations of both fillers did not severely compromise these properties. However, reductions in the tensile strength, impact strength and Young's modulus were observed, and both flours had increased water absorption capacity. FTIR analysis identified the characteristic peaks of the biocomposites and the ratio of the groups regarding the amount of added filler. The SEM revealed low interfacial adhesion between the polymer matrix and the filler. This study represents a significant advance in the valorization and application of circular economy principles to agricultural waste, such as artichoke waste. PLA/HV biocomposites make a substantial contribution to sustainable materials technology, aligning with the goals of the 2030 agenda to reduce environmental impacts and promote sustainable development.

Metabolic pathway analysis of the biodegradation of cellulose by Bacillusvelezensis

A green strategy that using Bacillus velezensis to degrade cellulose in bamboo forest waste was demonstrated. The cultivation conditions of microorganism, identified as Bacillus velezensis by 16S rDNA, were optimized by response surface methodology (RSM). Results showed that with a temperature of 35 °C, a pH of 6 in a Luria-Bertani (LB) medium, and a rotation speed of 140 r/min, the bamboo forest waste powder was added to the purified bacteria at a dose of 1 % (w/v), the cellulose degradation rate reached the highest value of 33.12 %. Besides, the fourier-transform infrared (FTIR), X-ray diffraction (XRD), scanning electron microscope (SEM) and liquid chromatography-mass spectrometry (LC-MS) indicated that cellulose could be effectively degraded, with possible products including cellobiose, uridine diphosphate (UDP)-glucose, D-glucuronic acid, etc. The metabolic pathways involved in cellulose degradation by this strain include the pentose phosphate, starch, sucrose, and glucuronic acid pathways.

Nanofabrication of Biochar from Cellulosic Waste for Bio-Sensing Application of Waste Water Treatment: Process, Challenges and Future Update

Nanofabrication of Biochar from Cellulosic Waste for Bio-Sensing Application of Waste Water Treatment: Process, Challenges and Future Update

Safe and promising bioconversion of rice cellulosic waste into algal biomass

Safe and promising bioconversion of rice cellulosic waste into algal biomass

Novel Recycling, Defibrillation, and Delignification Methods for Isolating α-Cellulose from Different Lignocellulosic Precursors for the Eco-Friendly Fiber Industry.

Alpha-cellulose, a unique, natural, and essential polymer for the fiber industry, was isolated in an ecofriendly manner using eleven novel systems comprising recycling, defibrillation, and delignification of prosenchyma cells (vessels and fibers) of ten lignocellulosic resources. Seven hardwood species were selected, namely Conocorpus erectus, Leucaena leucocephala, Simmondsia chinensis, Azadirachta indica, Moringa perigrina, Calotropis procera, and Ceiba pentandra. Moreover, three recycled cellulosic wastes were chosen due to their high levels of accumulation annually in the fibrous wastes of Saudi Arabia, namely recycled writing papers (RWPs), recycled newspapers (RNPs), and recycled cardboard (RC). Each of the parent samples and the resultant alpha-cellulose was characterized physically, chemically, and anatomically. The properties examined differed significantly among the ten resources studied, and their mean values lies within the cited ranges. Among the seven tree species, L. leucocephala was the best cellulosic precursor due to its higher fiber yield (55.46%) and holocellulose content (70.82%) with the lowest content of Klasson lignin (18.86%). Moreover, RWP was the best α-cellulose precursor, exhibiting the highest holocellulose (87%) and the lowest lignin (2%) content. Despite the high content of ash and other additives accompanied with the three lignocellulosic wastes that were added upon fabrication to enhance their quality (10%, 11%, and 14.52% for RWP, RNP, and RC, respectively), they can be considered as an inexhaustible treasure source for cellulose production due to the ease and efficiency of discarding their ash minerals using the novel CaCO3-elimination process along with the other innovative techniques. Besides its main role for adjusting the pH of the delignification process, citric acid serves as an effective and environmentally friendly additive enhancing lignin breakdown while preserving cellulose integrity. Comparing the thermal behavior of the ten cellulosic resources, C. procera and C. pentandra exhibited the highest moisture content and void volume as well as having the lowest specific gravity, crystallinity index, and holocellulose content and were found to yield the highest mass loss during their thermal degradation based on thermogravimetric and differential thermal analysis in an inert atmosphere. However, the other resources used were found to yield lower mass losses. The obtained results indicate that using the innovative procedures of recycling, defibrillation, and delignification did not alter or distort either the yield or structure of the isolated α-cellulose. This is a clear indicator of their high efficiency for isolating cellulose from lignocellulosic precursors.

Revealing the sodium storage mechanism of cellulose separator-derived hard carbon anode materials for sodium-ion batteries

Hard carbon (HC) shows significant promise as a material for sodium-ion batteries (SIB). Cellulose-derived carbon is considered one of the most promising high-performance anode materials for sodium-ion batteries. In this study, waste cellulose separator-derived HC anode materials were rationally developed using the pre-oxidation-carbonization pyrolysis method. The as-prepared HC possessed advantageous characteristics for Na+ storage, including a unique fibrous structure, a reasonable space layer, and a small specific surface area (SSA). The optimal sample demonstrated a substantial reversible capacity of 361.29 mAh/g at 0.1C, an impressive high-rate performance with a reversible capacity of 272.93 mAh/g at 10C, and an initial coulombic efficiency of 84.85 %. Following 500 cycles at 1C, the capacity retained 96.38 % of its initial value. The sodium storage process was identified as the “adsorption-insertion-pore filling mechanism” through ex-situ XRD and in-situ Raman experiments. Moreover, the as-prepared HCs demonstrated better rate and cycle capability when evaluated as anodes in full-cell sodium-ion batteries (SIBs). This research provides valuable insights into the rational design of high-performance HC anodes for SIBs and other applications.

Chemical recycling of waste cellulose denim fabric and re-dyeing process

Chemical recycling of waste cellulose denim fabric and re-dyeing process

Alkali pretreatment-assisted catalytic pyrolysis of waste cellulose acetate for selective preparation of levoglucosenone

With the increasing demand for cellulose acetate (CA) in industrial and daily applications, the disposal of its waste has emerged as an environmental concern. In this study, a novel and sustainable method for value-added utilization of waste CA was proposed, which involved NaOH pretreatment and subsequent catalytic pyrolysis using phosphoric acid-activated carbon (PAC) to prepare levoglucosone (LGO). The effects of pretreatment temperatures and NaOH concentrations on the physicochemical characteristics of CA were thoroughly investigated. Furthermore, the pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) experiments were conducted to methodically assess the impacts of both pretreatment and pyrolysis conditions on the production of LGO. The results indicated that NaOH pretreatment could effectively hydrolyze the ester bonds in CA, leading to the removal of acetyl groups and a decrease in thermal stability. At a pretreatment temperature of 40 °C, a NaOH concentration of 0.5 mol/L, a catalyst/sample ratio of 1/3, and a pyrolysis temperature of 400 °C, the LGO yield could reach 11.52 wt%, much higher than that obtained from catalytic pyrolysis of CA (2.70 wt%). This study provides an efficient method for treating waste CA and demonstrates its potential for conversion into high-value chemicals, laying a solid foundation for the green recycling of waste plastics.

Development of a method for producing carbon sorbents by thermochemical pyrolysis of liquid cellulose waste

Development of a method for producing carbon sorbents by thermochemical pyrolysis of liquid cellulose waste

Lipid production from corn straw by cellobiohydrolase and delta-6 desaturase engineered Mucor circinelloides strains under solid state fermentation

Previously, we constructed engineered M. circinelloides strains that can not only utilize cellulose, but also increase the yield of γ-linolenic acid (GLA). In the present study, an in-depth analysis of lipid accumulation by engineered M. circinelloides strains using corn straw was to be explored. When a two-stage temperature control strategy was adopted with adding 1.5% cellulase and 15% inoculum, the engineered strains led to increases in the lipid yield (up to 1.56 g per 100 g dry medium) and GLA yield (up to 274 mg per 100 g dry medium) of 1.8- and 2.3-fold, respectively, compared with the control strain. This study proved the engineered M. circinelloides strains, especially for Mc-C2PD6, possess advantages in using corn straw to produce GLA. This work provided a reference for transformation from agricultural cellulosic waste to functional lipid in one step, which might play a positive role in promoting the sustainable development of biological industry.

MXene assisted simple recycle of waste cellulose fiber with alginate fiber into fireproof and electromagnetic interference shielding composite

Textile wastes rapidly grow into a challenge when a significant portion of them are processed by landfilling or incineration, leading to hazardous solid and volatile pollutants. This work investigated the utilization of wasted cellulose fiber by recycling it with calcium alginate fiber into a fireproof composite filler as a circular economy strategy, followed by the modification with MXene dispersion to further enhance its fire resistance and offer it the electromagnetic interference shielding ability. A comprehensive investigation elucidated the flame retardant mechanism of the composite felt via studying its combustion behavior, the microstructural morphology of residue char, and the gasous compounds produced. The results indicated that this composite felt generated a large number of nonflammable gas species and fibrous residue char, serving as a natural barrier to impede the fuel supply and suppress heat diffusion, thereby endowing the composite felt with an outstanding fire retardant performance and reduced carbon footprint. Compared to other textile waste recycling processes, the opening-carding-needling punch technique employed in this study was more energy-efficient and environmentally friendly. The recycling of waste cellulose fiber into functional fireproof composites not only extended the practical applications of waste resources but also mitigated the negative environmental impact of textile disposal.

Possibilities of producing lightweight aggregates from silica-clay raw material and cellulosic waste

AbstractThe subject of the work is the characterization of lightweight aggregates intended for construction using the example of silica-clay raw material from south-eastern Poland (Dylągówka-Zapady deposit). The primary objective of the research is to assess the possibility of managing the accumulated organic waste, including cellulose pulp. This storage is problematic for processing plants and local government bodies and incurs high costs annually. Therefore, based on the patent (Kukułka et al. Method of producing raw meal, dried clay granules, and fired clay granules and the production line of raw meal, dried clay granules, and baked clay granules. Patent RP no P.429284.), an attempt was made to confirm the assumptions of the technology of fired clay granules, which can be used for zootechnical, agricultural, and construction purposes. The presented work assessed the physicochemical transformations in the clay-silica raw material after adding a significant amount of cellulose waste (10%, 20%, and 30%) in the temperature range of 25–1300 °C were assessed. Thermal methods such as thermodilatometry, Hot-Stage Microscopy with image analysis (IA-HSM) and thermal DSC/TG analysis with gas analysis were used for this purpose. Based on the first method, a temperature range was established in which sintering occurs without an apparent effect of densification. Therefore, the range of 850–950 °C was used to obtain fired granules, which were tested as a material for lightweight aggregates.

Synthesis and characterization of biocompatible hydrogel from textile–garment waste for personal hygiene products

The objective of the present study is to synthesise cellulose-based hydrogel from cellulosic waste that is produced in the garment and textile industries. Carboxymethyl cellulose was synthesized via carboxymethylation subsequent to the separation of cellulose. The progress of reaction was monitored by measuring the degree of carboxymethyl cellulose substitution. Carboxymethyl cellulose was graft co-polymerized with acrylic acid and acrylamide in the presence of N,N-methylene-bis-acrylamide to develop a superabsorbent hydrogel. The generated hydrogel was put through several mechanical and physical tests, as well as FTIR, XRD, TGA and SEM investigations, to evaluate its real formation and characteristics. The prepared hydrogel demonstrated favorable swelling properties, as well as excellent adsorption of ions and dyestuffs. The maximum water absorption capability of the superabsorbent material obtained from textile and garment waste was 182 g/g. Furthermore, the prepared hydrogel exhibits exceptional biocompatibility, biodegradability, environmental friendliness, and non-toxicity. These qualities make it an exceptional material for use in personal care items and protective gear.

Upcycling of tetra pack waste cellulose into reducing sugars for bioethanol production using Saccharomyces cerevisiae

Bioethanol production from waste materials offers a promising avenue for sustainable energy and waste management. In this study, fermentable sugars derived from tetra pack waste cellulose were bio-transformed into bioethanol using Saccharomyces cerevisiae. Tetra pack waste (180 g) yielded tetra pack cellulosic pulp (TPCP) of 145 g, after removing the different layers representing 80.56 ± 0.32% of the original weight. Cellulase from Bacillus sp. RL-07, with a cellulolytic potential of 6.98 ± 0.36 U/ml, released 32.72 ± 0.12 mg/ml of reducing sugars, achieving 44.60 ± 0.56% saccharification of TPCP under optimized conditions. Subsequent fermentation of the broth (1 L) with tetra pack cellulosic pulp hydrolysate (TPCPH) (50% v/v), containing 5.12 g of reducing sugars, by S. cerevisiae yielded 1.42 g of bioethanol per g of reducing sugars under optimized conditions, with a volume productivity of 0.24 g/l/h and a purity of 96.42% was confirmed by GC/MS analysis.The results of this study underscore the viability of utilizing tetra pack waste for bioethanol production, offering a sustainable solution for waste management while alleviating energy deficits and reducing environmental pollution. These findings align with objectives aimed at fostering sustainable progress and development.

Biodegradation of Cellulosic Wastes and Deinking of Colored Paper with Isolated Novel Cellulolytic Bacteria

Biofuels are the cheapest source of energy, and the continuous decline of traditional sources of energy with the increasing population leads to looking for alternatives to reduce the consumption of traditional sources of energy. Bioethanol production from lignocellulosic wastes and cellulosic wastes is not a new approach for fuel production but a cheap and accessible way for the production of fuel. Bacillus is one of the major species that can act as a source of diversified enzymes. In this study, it was emphasized on screening and isolation of a novel, characterization, and best catalytic action on both celluloses and proteins in the presence of different carbon and nitrogen sources. It was observed the effective catalytic breakdown of cellulose with the crude enzyme to glucose allowed fur for fermentation with Saccharomyces, ultimately leading to the generation of alcohol. The study aims to isolate the microbes that can produce cellulases and enzymes and could be used for biodegradation to produce ethanol in the reaction. The maximum enzyme activity was achieved at 3.112 UI with optimized pH and temperature, and the maximum conversion of sugars into alcohol was about 70% in the newspaper, cartons, colored paper, and disposable paper cups. An essential observation was the decolorization of the origami craft paper within 24 hours. The study was involved in enhancing the maximum Enzyme activity of cellulases from different cellulosic raw materials. Hence, it was achieved by JCB strain, optimization of pH, temperature, and acids for the biodegradation. The presence of peaks at 3200 and 2900 was a confirmation of ethanol bonds in the biodegradation reaction mixtures.

Upcycling of cellulosic textile waste with bacterial cellulose via Ioncell® technology

Currently the textile industry relies strongly on synthetic fibres and cotton, which contribute to many environmental problems. Man-made cellulosic fibres (MMCF) can offer sustainable alternatives. Herein, the development of Lyocell-type MMCF using bacterial cellulose (BC) as alternative raw material in the Ioncell® spinning process was investigated. BC, known for its high degree of polymerization (DP), crystallinity and strength was successfully dissolved in the ionic liquid (IL) 1,5-diazabicyclo[4.3.0]non-5-enium acetate [DBNH][OAc] to produce solutions with excellent spinnability. BC staple fibres displayed good mechanical properties and crystallinity (CI) and were spun into a yarn which was knitted into garments, demonstrating the potential of BC as suitable cellulose source for textile production. BC is also a valuable additive when recycling waste cellulose textiles (viscose fibres). The high DP and Cl of BC enhanced the spinnability in a viscose/BC blend, consequently improving the mechanical performance of the resulting fibres, as compared to neat viscose fibres.

Fungal co-culture enabled co-fermentation of food waste for production of endoglucanase enzyme

The primary scenarios of biochemical industries include diverse applications with high demand and the costly manufacturing of microbial cellulolytic enzymes. Using these enzymes to turn cellulosic waste into fuel is one of the prime applications of these enzymes to produce green fuel. Nevertheless, low production and weak functional abilities make these enzymes expensive and technically non-viable. This study presents multifactor bioprocess approaches to enhance cellulolytic enzyme production and efficiency using a low-cost strategy. Co-fermentation of pea pods (PPs) and potato peel (PP) wastes as food wastes has been conducted for solid-state fermentation (SSF) using fungal strain-based co-culture. To set the SSF, the nutrient medium and moisture balance of SSF have been maintained using an extract of PPs and PP waste, which are found to be rich in sugar and starch composition. Starch may function as a natural inducer in the SSF process to alleviate enzyme production in the presence of sugar composition. At 37 oC and pH 5.0, a maximum of 2.4 U/mL FPA (filter paper activity) has been produced at a substrate ratio of 4:04 (PPs:PP) using 50% of the moisture content on day 5 of the harvesting period. Additionally, 24.7 IU/mL of CMCase (carboxymethyl cellulase) in day 8 and 18.8 IU/mL of BGL (β-Glucosidase) in day 7 have been obtained. A temperature of 37 oC was found to be optimal, while a pH range of 5.0–9.0 was noticed to be optimal for maximum CMCase activity. Thus, the study may provide a sustainable approach to valorizing domestic solid food waste for the economic production of hydrolytic enzymes.

Co-fermentation of acid treated coconut wastes using mixed Bacillus cultures for enhanced production of extracellular enzymes: Application in bioconversion of raw coconut fibers

Higher cost of production and functioning efficiency are the two most important aspects of cellulolytic enzymes, as they directly affect the bioconversion of cellulosic waste into fermentable sugars. Thus, the current study aims to investigate the production of cellulolytic enzymes from low-cost waste biomass for use in the sustainable hydrolysis of biomass to yield fermentable sugars. Since coconut waste is a major contributor to biodegradable waste, two different parts of coconut, including the hard shell of coconut (CS) and the fibers of the shell (FS), have been used for enzyme production as feedstock. Further, enzyme production has been carried out on co-fermentative and acid-pretreated coconut substrates (CS and FS) at different quantities using mixed bacterial cultures. Following this, a crude enzyme with a maximum 20 U/gds FPA, 62 U/gds BGL, and 167 U/gds EG has been produced by mixed Bacillus cultures under co-fermentation of 0.5 % acid-pretreated CS and FS substrates at a quantity of 5:5 (g:g) at 35 oC and pH 5.0. The crude enzyme showed its thermal stability for 16 h at 50 oC and released ∼34 g/L of sugars from the hydrolysis of untreated FS biomass in 24 h. This work may have significant applications in the area of biomass-based biorefining as well as waste management.

Resource recovery from soiled sanitary napkin waste-a state-of-the-art review.

With ever-improving social and medical awareness about menstrual hygiene in India, the demand for sanitary napkins has increased significantly. The utilization of high-quality and environment-friendly raw materials to produce these pads is further supporting the growth of the market. However, with improving demand and usage, the need for proper disposal techniques becomes more relevant, since all of these pads get contaminated with human blood which makes them a biohazard and can cause significant damage to human health and the environment. One sanitary pad takes around 800years to degrade naturally and the plastic and super absorbent polymers (SAPs) in sanitary pads are non-biodegradable and can take multiple decades to degrade. Waste management technologies such as pyrolysis, gasification, and resource recovery can be adopted to manage tons of sanitary waste. Currently, sanitary waste treatment mainly focuses on landfilling, incineration, and composting, where biohazard wastes are mixed with tons of solid waste. Disposable sanitary pads have a high carbon footprint of about 5.3kg CO2 equivalent every year. Innovative solutions for sanitary pad disposal are discussed in the manuscript which includes repurposing of derived waste cellulose and plastic fraction into value-added products. Future aspects of disinfection strategies and value addition to waste cellulose recovered from napkins were systematically discussed to promote a circular economy.