Warner-Bratzler Shear Force Values Research Articles

Correlation of Marbling Characteristics with Meat Quality and Histochemical Characteristics in Longissimus Thoracis Muscle from Hanwoo Steers.

The objective of this study was to investigate the correlations of marbling characteristics, including marbling score, intramuscular fat (IMF) content, and fleck traits, with meat quality traits and histochemical characteristics of the longissimus thoracis muscle from Hanwoo steers. Marbling fleck characteristics, especially area, number, and fineness (F) index, measured by computerized image analysis were strongly correlated with marbling score and IMF content (p<0.05). However, coarseness (C) index and F/C ratio were somewhat limited relationships with marbling score. In contrast, the IMF content and the number of smaller white flecks increased with increasing lightness value (p<0.05). Moreover, beef with higher marbling scores showed lower cooking loss and Warner-Bratzler shear force value compared to beef with lower marbling scores (p<0.05). Regarding the muscle bundle traits, as number of bundle increased, number of marbling flecks increased (p<0.05), although most marbling characteristics did not have significant correlation with muscle fiber or bundle characteristics.

Effects of temperament at feedlot arrival and breed type on growth efficiency, feeding behavior, and carcass value in finishing heifers.

Objectives were to evaluate the effects of temperament at feedlot arrival and breed type on productivity, feed efficiency, feeding behavior, and carcass quality traits in finishing beef heifers, and to examine interactions between temperament and breed type. Heifers (Angus, Braford, Brangus, and Simbrah, N = 411, BW = 280 kg) were fed a high-grain diet (ME = 3.0 Mcal/kg DM) in pens equipped with electronic feed bunks. Quality grade (QG), yield grade (YG), and Warner-Bratzler shear (WBS) force values (day 1 and 14 postmortem) were evaluated. Relative exit velocity (REV) at feedlot arrival was used as a covariate in mixed models to assess the effects of temperament and interactions with breed type, with means compared at ±1 SD from the mean initial REV. Calm heifers (mean REV minus 1 SD) had 4% greater (P < 0.001) initial BW, 12% greater (P < 0.001) ADG, 8% greater (P < 0.001) DMI, and 4% greater (P < 0.02) G:F than heifers with excitable temperaments (mean REV plus 1 SD). A temperament × breed interaction was detected (P < 0.01) for residual feed intake (RFI). Braford heifers had a more (P < 0.05) negative REV covariate slope (-1.49 ± 0.65) than the other breeds, such that excitable Braford heifers had lower (P < 0.05) RFI than the other breeds with excitable temperaments. Temperament × breed interactions were observed (P < 0.001) for DMI per BW0.75 and bunk visit (BV) duration. Braford heifers had more (P < 0.05) negative REV covariate slopes for both traits than Angus, Brangus, and Simbrah heifers such that excitable Braford heifers consumed less (P < 0.05) DMI per BW0.75 and had less BV duration compared to excitable Angus and Brangus heifers. Calm heifers had 9% greater (P < 0.01) meal duration, and consumed meals that were 22% longer (P < 0.001) and 17% larger (P < 0.001) compared to excitable heifers. Calm heifers had 12% more (P < 0.001) BV events per meal then excitable heifers. Carcasses from calm heifers were 4% heavier (P < 0.05) and had 7% greater (P = 0.05) backfat (BF) depth and tended to have 4% greater (P = 0.07) USDA YG than carcasses from excitable heifers. Additionally, loin steaks from calm heifers had 8% lower (P < 0.05) WBS force than steaks from excitable heifers. Based on a carcass grid with discounts and premiums for HCW, QG, YG, and tenderness, calm heifers returned $62 more (P < 0.01) revenue per animal than excitable heifers. These results demonstrate that heifers with divergent phenotypes for temperament on feedlot arrival differ in their performance, feed efficiency, and feeding behavior patterns, as well as carcass quality and revenue.

Comparison of carcass traits, meat quality and expressions of MyHCs in muscles between Mashen and Large White pigs

The aim of this study was to evaluate the differences in carcase traits, meat quality and muscle characteristics (mean fibre diameter and MyHCs levels of expression) between Mashen and Large White pigs. A total of 60 pigs (30 Mashen pigs and 30 Large White pigs, half male and half female in each breed) were used in this experiment. Results showed that Mashen pigs exhibited lower slaughter weight, reduced back-fat thickness, reduced loin eye area and lower lean meat ratio than Large White pigs (p < .05). Meat from Large White pigs had higher pH1, greater drip losses, higher Warner-Bratzler shear force values, higher lightness, higher yellowness, and greater mean diameter of muscle fibres. Also, meat from Large white pigs had lower cooked yield, lower redness, and reduced intramuscular fat content than meat from Mashen pigs (p < .05). The contents of 17 amino acids, total amino acids, essential amino acids and umami amino acids in the longissimus dorsi of Mashen pigs were higher than those in Large White pigs (p < .05). Large White pigs had higher monounsaturated fatty acids and lower polyunsaturated fatty acids than Mashen pigs (p < .05). Meanwhile, the expression of MyHCI was significantly higher and the expression of MyHCIIb was lower in Mashen than in Large White pigs (p < .05). The higher MyHCI and lower MyHCIIb found in muscles from Mashen pigs might partially explain meat quality differences found between the two breeds in the present study. These results provide valuable information for meat quality differences between Mashen and Large White pigs.HighlightsCarcase traits and meat quality between Large White and Mashen pigs exhibited significant differences.The total amino acids, essential amino acids and umami amino acids in Mashen pigs were higher than those in Large White pigs.Large White pigs had higher monounsaturated fatty acids and lower polyunsaturated fatty acids than Mashen pigs.The expression of MyHCI was significantly higher and the expression of MyHCIIb was lower in Mashen than in Large White pigs.

Effects of Breed Type, Residual Feed Intake and Post-Mortem Aging on Physio-Chemical Properties of Triceps Brachii Muscle and Their Relationships With Beef Toughness

ObjectivesThe influence of breed type, residual feed intake (RFI) and post-mortem aging on meat and carcass quality attributes and intramuscular connective tissue characteristics were examined in the bovine Triceps brachii, a high connective tissue muscle from the chuck. The hypothesis that selection for low RFI in beef cattle increases beef toughness, increases collagen content and reduces collagen heat solubility of the Triceps brachii was tested.Materials and MethodsSeventy-one beef steers from Angus (n = 23), Charolais (n = 24) and Angus crossbred (n = 24)) genetics were used. Each breed had high RFI and low RFI steers (n = 12). Muscles collected were aged for 3- and 13-days post-mortem (dpm). Final animal live weight, grade marbling, intramuscular pH, water holding capacity (WHC), intramuscular fat, cooking loss, drip loss, protein, temperature, moisture, color, RFI, and Warner Bratzler shear force (WBSF) data were collected for carcass and meat quality measurements. Total collagen, collagen heat solubility, and collagen cross-link Ehrlich’s chromogen (EC) of the isolated perimysium were quantified. Data were analyzed using a split-plot experimental design procedure (R software 3.4.1) with breed and RFI as main effects in the whole plot and postmortem aging included at the subplot level.ResultsFinal weight was significantly greater for Charolais (683 ± 9.58 kg) than Angus (554 ± 9.65 kg) and Angus crossbred (568 kg ± 9.58 kg) steers (P = 0.017), and grade marbling score was higher for high RFI (421 ± 19.85) than for low RFI steer carcasses (385 ± 19.82) (P = 0.001). No significant effects of breed type and RFI (P > 0.05) were observed on meat quality attributes. WBSF value at 3 dpm (3.72 kg) was significantly higher than at 13dpm (3.21 kg) (P < 0.005). Collagen solubility was significantly higher at 13 dpm (25.88%) than at 3 dpm (18.03%) (P < 0.005). Total collagen and wet endomysium were positively correlated (r = 0.44) as were total collagen and EC in raw muscle (r = 0.76), EC and wet perimysium (r = 0.42) and WBSF and EC at 13 dpm (r = 0.27) (P < 0.005). Total collagen and collagen solubility at 3dpm (r = –0.36) and 13 dpm (r = –0.63) were negatively correlated, as were EC and solubility at 3 dpm (r = –0.38) (P < 0.005).ConclusionIncreasing postmortem aging periods reduced WBSF and increased collagen heat solubility of the Triceps brachii muscle. With no effect of RFI on meat quality measurements, the production cost can be reduced by selecting for low RFI animals without sacrificing product quality.Table 7.Least square means (± standard error of the mean) for WBSF, soluble collagen, and collagen solubility of Triceps brachii muscles at 3 and 13 d post-mortem aging (dpm)

Influence of Beef Production System Technology on Calpain-1 Autolysis and Troponin-T Degradation

ObjectivesBeef production systems utilize implants and β-agonists to improve beef cattle feed efficiency and promote muscle growth. Warner-Bratzler shear force values can be greater in strip loin steaks from cattle treated with implants or β-agonists. Calpain-1 degrades myofibrillar proteins post-mortem, thus altering calpain-1 activation or autolysis which can influence meat tenderness and proteolysis. The objective of this study was to determine the impact beef production system technologies on calpain-1 autolysis and troponin-T degradation as an indicator of tenderness formation and postmortem proteolysis.Materials and MethodsFrom a larger study, beef striploins (n = 16, n = 4/treatment) from cattle finished utilizing four different production systems were collected for analysis: 1) no antibiotics (NA; receiving no technology); 2) non-hormone treated cattle (NHTC; fed 300 mg monensin and 90 mg tylosin during the finishing phase); 3) implant (IMPL; same technologies as NHTC and administered a series of three implants including a low- potency calf implant [36 mg zeranol], a moderate-potency initial feedyard implant [80 mg trenbolone acetate and 16 mg estradiol], and a high potency finishing implant [200 mg of trenbolone acetate and 20 mg estradiol]; and 4) all previous technologies plus fed a β-agonist (IMBA; same technologies as IMPL and fed 200 mg ractopamine hydrochloride per steer per d). Striploins were vacuum packaged, aged for 7 d, and frozen. Western Blots were conducted for calpain-1 autolysis and troponin-T degradation (30 kDa). Abundance of calpain-1 bands and troponin-T degradation product was normalized by a reference on each gel. Treatments were evaluated in PROC MIXED of SAS 9.2 where least squares means and SEM were computed and separated using least significant differences (PDIFF) when tests for fixed effects were significant at P < 0.05 and trending P ≤ 0.10.ResultsCalpain-1 autolysis differed (P < 0.05) in the IMPL group compared to the NHTC group for both active, 78 kDa band, and the fully autolyzed, 76 kDa band. The IMPL group had a greater percentage (P = 0.0048) of active calpain-1 and a lower percentage (P = 0.0048) of fully autolyzed calpain-1 compared to the NHTC group. Also, a trend was detected when comparing both the active, 78 kDa band, and fully autolyzed, 76 kDa band, in the IMBA and IMPL group where the IMPL group had a greater percentage (P = 0.0727) of active calpain-1 and a lower percentage (P = 0.0727) of fully autolyzed calpain-1. Production system did not influence (P > 0.05) 30 kDa troponin-T product abundance.ConclusionThese data indicate level of technology may play a role in the activation and autolysis of calpain-1 from the 80 kDa inactive form to the 78 kDa active product and finally to the 76 kDa autolyzed product. Calpain-1 autolysis was not measured; however, these data suggest calpain-1 autolysis in the IMPL group may be limited compared with NHTC and IMBA groups. Consequently, calpain-1 may remain in the 78 kDa active form in the implanted cattle, actively degrading myofibrillar proteins. However, production system did not influence troponin-T 30 kDa degradation products. Further analysis of the rate of calpain-1 autolysis and troponin-T degradation at different days of postmortem aging could provide further evidence that different beef production technologies impact calpain-1 autolysis and postmortem proteolysis.

Evaluation of Beef Top Sirloin Steaks of Four Quality Grades Cooked to Three Degrees of Doneness

ObjectivesThe objective of this study was to evaluate the impact of quality grade on beef eating quality of top sirloin steaks when cooked to multiple degrees of doneness (DOD).Materials and MethodsBeef top sirloin butts (IMPS #184; N = 60; 15/quality grade) were collected to equally represent 4 quality grades [Prime, Top Choice (Modest and Moderate marbling), Low Choice, and Select]. Top butts were cut into six consecutive steaks, and then divided laterally to get a total of twelve steaks per top butt. Steaks were assigned to one of three DOD: rare (60°C), medium (71°C), and well-done (77°C). Steaks within each DOD were assigned to consumer sensory analysis, trained sensory analysis, fat and moisture analysis, and Warner-Bratzler shear force (WBSF). Consumers (N = 236) were fed samples under red lighting and evaluated steaks for juiciness, tenderness, flavor, and overall liking on continuous line scales. Trained sensory panelists evaluated samples for initial and sustained juiciness, myofibrillar and overall tenderness, connective tissue amount, beef flavor intensity, and off flavor intensity on similar continuous line scales. Data were analyzed as a split-plot, with a whole plot factor of quality grade, and sub-plot factor of DOD.ResultsThere were no interactions (P > 0.05) for all consumer ratings of palatability traits. For quality grade, no differences (P > 0.05) were observed for consumer ratings of tenderness, flavor, and overall liking; however, there was a significant effect (P = 0.01) on juiciness. Prime top sirloin steaks had higher (P < 0.05) juiciness ratings than all other quality grades, except for Top Choice. Additionally, as DOD increased, consumer ratings and the percentage of steaks rated acceptable for all palatability traits decreased (P < 0.05; rare > medium > well-done). There was a quality grade × DOD interaction (P < 0.05) for trained sensory ratings of myofibrillar tenderness, initial juiciness, and sustained juiciness. When steaks were cooked to medium, Prime and Top Choice steaks had higher (P < 0.05) panelist ratings for initial and sustained juiciness than Low Choice and Select steaks. Similar to trained panelist ratings of juiciness, Prime and Top Choice steaks had higher (P < 0.05) ratings of myofibrillar tenderness than Select steaks. Prime and Top Choice steaks had similar (P > 0.05) and higher (P < 0.05) ratings for myofibrillar tenderness when compared to Low Choice steaks. Within DOD, each successive increase in DOD resulted in a concurrent decrease (P < 0.05; rare > medium > well) in trained panelist ratings of myofibrillar tenderness, initial juiciness, and sustained juiciness. There was no quality grade by DOD interactions (P > 0.05) for Warner-Bratzler shear force. Prime steaks were more (P < 0.05) tender than Low Choice and Select steaks but were similar (P > 0.05) to Top Choice. Moreover, as DOD increased, WBSF concurrently increased (P < 0.05; well-done > medium > rare), with well-done steaks having WBSF values 0.8 kg tougher than rare steaks.ConclusionThese results indicate that regardless of DOD, quality grade had minimal impact on the palatability of beef top sirloin steaks. Therefore, unless cooked to a medium DOD, it is unnecessary for consumers, retailers, and foodservice to pay premium prices for higher quality top sirloin steaks, as the same eating experience will be provided.

Influence of Cook Method and Degree of Doneness on Beef Flavor Attributes in Round Steaks

ObjectivesIt has been well established that cooking method, marbling level, and cooked internal temperature endpoint affect beef flavor, the most important driver of consumer acceptance. However, beef cuts respond differently to cooking method and cooked internal temperature endpoint based on their inherent chemical characteristics.Materials and MethodsTreatments were: beef cuts (inside round, bottom round, and eye of round); USDA beef quality grade (upper two-thirds Choice and Select); cooking methods (pan grill, stir fry, stew no marinade, stew marinade, and roast); and internal cook temperature endpoints (58, 70, and 80°C). The pan grill cook method included 0.25 and 0.75 in samples from each muscle type. The stir fry cook method treatment was limited to 0.25 in cuts, which were cut into 1.00 in strips prior to cooking. The marinated and non-marinated stew cook method treatments included 0.25 and 0.75 in samples from each muscle. These samples were then cut into 0.25 × 1.00 × 1.00 in and 0.75 × 1.00 × 1.00 in samples prior to cooking. Stew marinated samples were marinated with 118 mL water, 90 mL lemon juice, 30 mL canola oil, 5 mL salt, and 2.5 mL pepper. Two lb roasts were cut from bottom round and eye of round subprimals and inside round subprimals were cut into 2.00 in roasts prior to cooking. An expert descriptive beef flavor and texture attribute panel evaluated each sample using 16-point scales for flavor and texture attributes. Warner-Bratzler shear force (WBSF) were determined. The trained panel results and WBSF values were analyzed using Proc Means and Proc GLMMIX procedures of SAS (version 9.4, SAS Institute, Cary, NC) with a predetermined α of 5%.ResultsQuality grade impacted flavor for the inside round (P < 0.05). USDA quality grade had minimal effect on tenderness as expected, as beef round cuts are highly active muscles in the animal and contain considerable amounts of connective tissue. Cooking method and internal cook temperature endpoint, or cooking time for the stewing cooking treatment, impacted beef flavor to a greater extent (P < 0.05). When pan fried, thicker cuts resulted in more positive flavor attributes. For cuts that were roasted, cooking to higher internal temperatures resulted in higher levels of beef identity, roasted, and umami flavors and less serumy/bloody flavors, as well as decreased tenderness (P < 0.0001), especially in inside round roasts. Marinated round cuts were more tender than their non-marinated counterparts (P < 0.0001). Cuts that were thinner and had longer cooking times were more tender but had more off-flavor attributes (P < 0.05).ConclusionCut thickness, cooking method, length of cooking or internal cook temperature endpoint, and presence of marinade affected flavor and texture of bottom round, eye of round, and inside round cuts. This data will be useful in providing consumer and food service personnel recommendation on how to maximize the flavor and texture of beef round cuts.

Detection of Differences in Cook Loss and Tenderness of Aged Pork Chops Cooked to Differing Degrees of Doneness Using Sous-Vide

ObjectivesThe objective was to determine the ability to detect differences in cook loss and Warner-Bratzler shear force (WBSF) value between chops aged for differing time periods and cooked to varying degrees of doneness in a sous-vide style cooker.Materials and MethodsLoins (n = 68) from pigs humanely slaughtered at the University of Illinois Meat Science Laboratory were separated between the 10th and 11th rib into anterior and posterior sections. The posterior section was cut into 6 separate 2.54 cm thick chops. The middle 4 chops were randomly designated for aging of 3 d and cooked to 63°C, aged 7 d and cooked to 63°C, aged 14 d and cooked to 63°C, or aged 14 d and cooked to 71°C. Chops (n = 272) were cooked by placing them in a water bath with an immersion circulator set to the desired end-point temperature for 90 min. Cook loss was calculated for each chop by measuring initial and final weight, and accounting for packaging weight. Four cores measuring 1.25 cm in diameter were cut parallel to the muscle fibers from each chop and analyzed for WBSF. Data were analyzed using a 1-way ANOVA. Least squares means were separated using the probability of difference (PDIFF) option in the MIXED procedure of SAS.ResultsCook loss increased as aging period or degree of doneness increased. Among chops cooked to 63°C, chops aged 3 d had 1.14% units less (P < 0.01) cook loss than those aged 7 d, and chops aged 7 d had 1.13% units less (P < 0.01) cook loss than those aged 14 d. Among chops aged for 14 d, chops cooked to 71°C had 10.06% units greater (P < 0.001) cook loss than chops cooked to 63°C. Differences in tenderness were also detected between aging periods. Among chops cooked to 63°C, chops aged 3 d required 0.27 kg more (P = 0.02) force to shear than those aged 7 d, but chops aged 7 d did not differ (P = 0.15) from those aged 14 d. End-point cooking temperature had a greater effect on tenderness, with chops aged 14 d and cooked to 71°C requiring 0.83 (P < 0.001) kg more force than those aged 14 d and cooked to 63°C. Previous studies have reported a decrease in Warner-Bratzler shear force between 7.10–21.29% when comparing early (1–3 d) and mid (7 or 9 d) aging and decreased between 3.53–15.38% when comparing mid and late (14–21 d) aging. In the present study, Warner-Bratzler shear force decreased 9.00% from early-to-mid aging and 5.86% from mid-to-late aging.ConclusionOverall, these data indicate sous-vide is an acceptable cooking method for use in experiments as expected differences in cook loss and WBSF were detected in chops aged to differing time points or cooked to differed degrees of doneness.

Comparative analysis of pork tenderness prediction using different optical scattering parameters

This study aimed at the assessment of pork tenderness using hyperspectral backscattering imaging technique. Backscattering images for 54 pork samples in the spectral range of 480–900 nm were characterized by 3-parameter Lorentzian distribution function (LD) and diffusion equation (DE), which represent a statistical model and a theoretical model respectively. Characteristic parameters spectra were obtained and employed to establish partial least squares regression (PLSR) models for the Warner-Bratzler Shear Force (WBSF) values of pork samples. By contrast, the results showed that LD function interpreted pork scattering profiles more accurately than DE model between 480 and 600 nm. The PLSR model based on two-LD parameter combinations (the asymptotic value a and the peak value b of the backscattering profile) gained the best prediction results, with correlation coefficient in the prediction set (Rp) of 0.902, root mean square error of prediction (RMSEP) of 5.218 N, indicating that hyperspectral backscattering imaging technique coupled with LD model is preferable for rapid and nondestructive evaluation of pork tenderness.

Comparison of Blood Loss and Meat Quality Characteristics in Korean Black Goat Subjected to Head-Only Electrical Stunning or without Stunning.

This study assessed the effects of non-stunning (NS) and head-only electrical stunning (HOES) slaughtering condition on meat quality traits of longissimus lumborum (LL) muscle from Korean black goat (KBG). Ten KBGs (18 months) were assigned into two groups and exposed to either NS or HOES treatments. Blood loss (BL) % was measured after exsanguination, and meat quality traits including muscle pH, meat color measurements (CIE L*, a*, b*, Chroma, and hue angle), water-holding capacity (WHC), Warner-Bratzler shear force (WBSF), and sarcomere length were measured at 24 h postmortem. Results indicated that NS and HOES had no significant difference on BL %, the rate of pH decline, meat color properties, and WHC (p>0.05). It has only a small effect on WBSF and sarcomere length values, but the difference was marginal. These results suggested that meat quality of LL muscle from goat might not be affected by slaughter methods because neither NS nor HOES did result in poor quality of meat.

Comparison of Drying Yield, Meat Quality, Oxidation Stability and Sensory Properties of Bone-in Shell Loin Cut by Different Dry-aging Conditions.

This study aimed to investigate the drying yield, meat quality, oxidation stability and sensory properties of Hanwoo beef loin subjected to different dry-aging conditions. A total of 54 Hanwoo beef loins (bone-in, 6th–13th ribs) with fat cover at 2 d postmortem were assigned to four groups and hung in a dry-aging room at a controlled temperature (2℃–4℃), humidity (65%–85%) and air velocity (3 m/s). Four treatment conditions were tested; the respective temperature, humidity and treatment duration are as follows: T1, 2℃, 85%, 60 d; T2, 2℃, 65%, 20 d+2℃, 75%, 20 d+4℃, 85%, 20 d; T3, 2℃, 75%, 20 d+4℃, 85%, 40 d; T4, 4℃, 85%, 60 d. The drying yield, total aerobic counts and fat contents increased, whereas the moisture content, meat color (CIE L*, a*, and b*), and Warner-Bratzler shear force values decreased significantly during the aging period for all treatments (p<0.05). The cooking loss (%) did not change significantly until 40 d, and it was significantly higher in T1 and T4 than in T2 and T3 at 60 d (p<0.05). The water-holding capacity, pH and lipid oxidation [thiobarbituric acid reactive substance (TBARS) values] increased during aging (p<0.05). The sensory scores for tenderness, juiciness, flavor, and overall acceptability of dry-aged loin muscles increased as the aging period increased. T2 and T3 had significantly higher sensory scores and T1 had significantly lower scores for tenderness, juiciness, flavor, and overall acceptability at 20, 40, and 60 d for loin muscles (p<0.05).

Feeding distillers grains to cattle may affect beef tenderness early postmortem.

The objective of this study was to evaluate the effects of dietary fat source with modified distillers grains plus solubles (MDGS) on beef tenderness through examination of sarcoplasmic reticulum (SR) membrane fatty acid composition, changes in sarcoplasmic calcium concentration, Warner-Bratzler shear force (WBSF), sarcomere length, and proteolysis early postmortem. Steers (n = 256) were fed for 134 d on either corn, or a diet containing 40% full-fat MDGS, 40% de-oiled MDGS, or 38% de-oiled MDGS plus 2% corn oil. Twenty-four USDA Choice carcasses (three carcasses per pen; eight pens per treatment) were selected within each dietary treatment, and strip loins were collected and aged for 2, 9, 16, or 23 d postmortem and subject to retail display (RD) for an additional 7 d. Feeding MDGS increased (P < 0.05) concentrations of linoleic acid (18:2) and tended to increase (P = 0.06) total polyunsaturated fatty acids (PUFA) in the SR membrane. Steaks from cattle fed MDGS had greater sarcoplasmic calcium concentration than steaks from cattle fed corn at day 2 postmortem (P = 0.05). Steaks from steers fed de-oiled MDGS and de-oiled MDGS plus corn oil tended to have lower WBSF values (P = 0.08) than steaks from cattle fed corn at 2 d of aging with 0 d of RD. There were no differences among dietary treatments for sarcomere length (P = 0.92) and troponin-T degradation at 2 d postmortem (P = 0.60). Results suggest that feeding MDGS may increase early postmortem release of calcium into the sarcoplasm due to increased 18:2 and PUFA concentration in the SR membrane, which could result in increased beef tenderness early postmortem.

Palatability of beef chuck, loin, and round muscles from three USDA quality grades.

The objective of this study was to determine the palatability of various beef cuts from 3 USDA quality grades. Five different beef subprimals from USDA Prime, Choice, and Select (n = 10/quality grade) carcasses were utilized for the study, including: strip loins, inside rounds, bottom rounds, shoulder clods, and chuck rolls. Subprimals were fabricated into 9 retail cuts, which contained the following beef muscles: longissimus lumborum (LL); longissimus thoracis, complexus, and spinalis dorsi (LCS); infraspinatus (IF); serratus ventralis (SV); triceps brachii (TB); teres major (TM); adductor (AD); semimembranosus (SM); and biceps femoris (BF). The pH and percentage of fat, moisture, protein, and collagen was determined for each muscle on a raw basis. Additionally, cooked steak measurements included Warner-Bratzler shear force (WBSF) and slice shear force (SSF). Consumer and trained sensory panelists evaluated palatability traits of each cut and quality grade combination. A quality grade × muscle interaction was determined for trained panelists assessment of overall tenderness (P = 0.03), SSF (P = 0.02), proximate composition (P < 0.01), and pH (P < 0.01). In all objective and subjective measurements of tenderness, the LCS was the most tender (P < 0.05), while cuts from the round (BF, AD, and SM) were among the toughest and least juicy (P < 0.05). Conversely, consumers and trained sensory panelists identified the LCS, IF, and SV to be juicier (P < 0.05) than all others. The TB, TM, and LL were perceived by consumers most often as being everyday quality. The LCS was found by consumers to be the most acceptable (P < 0.05) across all attributes, with the SM being the least (P < 0.05) acceptable muscle. For each muscle, fat percentage was the greatest (P < 0.05) in Prime cuts. Slice shear force determined Prime IF, LL, and SV to be more tender (P < 0.05) than Choice and Select. No SSF differences (P > 0.05) were found among quality grades for the AD, BF, and SM. The WBSF values decreased (P < 0.05) across all muscles, as quality grade increased (Prime < Choice < Select). The results of this study indicate that muscles from the chuck may be utilized to provide consumers with a positive eating experience. Meanwhile, muscles from the round are likely to provide consumers with a lower quality eating experience.

Carcass characteristics and meat quality of purebred Pakchong 5 and crossbred pigs sired by Pakchong 5 or Duroc boar.

ObjectiveThis study investigated carcass characteristics and meat quality of purebred Pakchong 5, crossbred pigs sired by Pakchong 5, and crossbred pigs sired by Duroc.MethodsForty-eight pigs (average body weight of 22.25 kg) were composed of three groups as purebred Pakchong 5 (PP), Large White×Landrace pigs sired by Pakchong 5 (LWLRP), and Large White×Landrace pigs sired by Duroc (LWLRD). Each group consisted of eight gilts and eight barrows. At 109-day-raising period, pigs were slaughtered, and carcass characteristics were evaluated. Longissimus thoracis (LT) muscles from left side of carcasses were evaluated for meat quality and chemical composition. Data were analyzed using general linear model procedure, where group, sex, and their interaction were included in the model.ResultsThe PP had greater carcass, total lean, and ham percentages than crossbred pigs (p< 0.05). LWLRP had thicker backfat and more carcass fat percentage than LWLRD (p<0.05). There were no differences (p>0.05) on cutting percentages from tender loin, loin, boston butt, and picnic shoulder among groups. The PP and LWLRP had larger loin eye area (LEA) than LWLRD (p<0.05). Gilts had more loin percentage and lower L* value than barrows (p<0.05). No meat color parameters (L*, a*, and b*) were affected by groups (p>0.05). PP and LWLRP had larger muscle fiber diameters than LWLRD (p<0.05). However, water holding capacity, Warner-Bratzler shear force values, and chemical composition of LT were not affected by group or sex (p>0.05).ConclusionPakchong 5 purebred has good carcass and lean percentages. Compared to Duroc crossbred pigs, Pakchong 5 crossbreds have similar carcass and lean percentages, larger LEA, and slightly more carcass fat, with comparable meat quality and chemical composition. Pakchong 5 boars are more affordable for very small- to medium-scale pig producers.

Carcass traits and consumer acceptability of striploin steaks from band-castrated, intratesticular zinc-injected, or sexually intact beef cattle.

One hundred and eighty beef bulls (BW = 337 ± 10.9 kg) were blocked by BW (6 blocks) and assigned randomly to one of three treatments on day 0: 1) INJ; received 1 mL (100 mg Zn) of a Zn solution in each testis, 2) BAN; received blood-restrictive rubber band placed upon the dorsal aspect of the scrotum, and 3) BUL; bulls with testicles remaining intact. Cattle were grouped by weight block in a randomized complete block design (three treatment pens/block and 10 cattle/pen) and harvested by block on three separate dates when blocks reached similar BW and visual subcutaneous fat thickness depth. Striploins were removed from the left carcass sides, vacuum packaged and aged for 14 d, and then frozen at −20 °C. Frozen striploins were sliced into 2.54-cm-thick steaks and remained frozen until analyses. Steaks (n = 3/animal) were used to assess consumer acceptability via consumer taste panel (n = 152 panelists), Warner-Bratzler shear force, percentage cook loss, and cooked color values. Data were analyzed using mixed model procedures; pen was the experimental unit for all dependent variables. Hot carcass weights and LM area were greater (P < 0.01) for the INJ and BUL treatments compared with BAN. Mean yield grade did not differ between treatments (P = 0.12), although BAN carcasses had smaller LM area (P < 0.01) than BUL or INJ carcasses. Percentage of USDA Choice or better carcasses was greater (P < 0.01) for BAN than INJ and BUL treatments. Consumer panelists detected a difference in perceived tenderness; BAN steaks had greater (P = 0.02) tenderness scores than BUL steaks, whereas INJ steaks were intermediate. Panelists rated juiciness of BAN steaks greater (P < 0.01) than either BUL or INJ steaks. Panelists rated beef flavor greater (P = 0.01) for BAN and BUL steaks than INJ steaks. Overall acceptability was greater (P < 0.01) for BAN compared with INJ steaks, whereas BUL steaks were intermediate. Percentage cook loss of striploin steaks (P = 0.47) and Warner-Bratzler shear force values (P = 0.11) did not differ. Cooked color lightness (L*) and redness (a*) values were not affected (P ≥ 0.23) by treatment. Striploin steaks from BAN and BUL treatments had greater (P = 0.02) yellowness values (b*) than INJ steaks. The ratio of red-to-brown (630:580 nm) of cooked striploin steaks was greater (P = 0.05) for INJ than either BAN or BUL treatments. Carcass and palatability outcomes of INJ were more similar to BUL than BAN, suggesting limited efficacy of INJ in mature beef bulls at feedlot entry.

Effect of Ultrasound and Calcium Chloride on the Ultrastructure and the Warner-Bratzler Shear Force Value of Beef Shank Muscle Fibers

Meat tenderness is a major factor in consumer satisfaction. Tenderness may be quantified by changes in muscle sarcomere length, roughness (ultrastructure) and shear force. The ultrastructure and the Warner-Bratzler shear force value of beef shank muscle fibers were experimentally measured in controlled applications of ultrasound and calcium chloride. Uncooked beef samples were treated with ultrasound at 40 kHz at different intensities for 6 min, and then immersed in a range of calcium chloride solutions for 24 h. Warner–Bratzler shear analysis and atomic force microscopy (AFM) data collection were performed for each sample. AFM height derived data (the sarcomere length and roughness values) and the Warner–Bratzler shear force values indicate optimum ranges of ultrasound intensity and calcium chloride concentration for meat tenderization. While the effect of low intensity ultrasound alone was not significant, calcium chloride treatment increased the sarcomere length and decreased shear force values. Furthermore, the combination of ultrasound and calcium chloride increased the sarcomere length significantly and simultaneously reduced the Warner–Bratzler shear force tolerance of the sample. These data suggested that low intensity and frequency ultrasound alongside Calcium Chloride immersion can promote the transmembrane transport of calcium ions via the calpain system to improve meat tenderness.

Application of tension to prerigor goat carcasses to improve cooked meat tenderness

In two separate experiments, carcasses of intact Kiko × Boer male kids were assigned randomly to tension treatments applied 30 min postmortem: 1) suspended by the Achilles tendon (AT); 2) suspended from the pelvic bone with front and hind legs tied together (TS); or 3) suspended by the Achilles tendon, and the fore- and hindsaddle were separated at the 12th/13th thoracic intervertebral disk, external fat, accessory muscles and epimysium surrounding the longissimus muscle (LM) were cut (TC), and a 2.3-kg weight attached to the neck (TC + W). Warner-Bratzler shear force values for the LM were reduced (P < 0.05) 24.4 to 35.9 N in TS carcasses compared to AT carcasses, and WBSF values of SM from TS carcasses were 25.0 and 20.3 N less (P < 0.05) than those for AT and TC + W carcasses, respectively. Results indicated that cooked goat meat tenderness, particularly the LM and SM, may be improved greatly by suspending goat carcasses by the pelvic bone.

Comparing Honduran and United States Consumers’ Sensory Perceptions of Honduran and U.S. Beef Loin Steaks

The objective of this study was to compare the eating quality characteristics of beef from the United States and Honduras and to assess the willingness of Honduran and U.S. consumers to pay for these products. All U.S. sourced strip loins from grain-finished cattle, aged 21 d, were selected to equally represent USDA Select (SEL; n = 6) and upper 2/3 (Top) Choice (TC; n = 6) quality grades. Additionally, strip loins (n = 6) from Honduran grass-finished (HGRASS) cattle and grain-finished (HGRAIN) cattle (n = 6) were collected from a commercial abattoir in Siguatepeque, Honduras and aged 21 d. Samples were evaluated on 8-point hedonic scales for flavor, tenderness, juiciness, and overall liking by 240 consumers in each country. Consumers indicated if each trait was acceptable, and willingness to pay for each sample was rated in U.S. dollars (or the Honduran Lempiras equivalent): $0, 3, 6, and 10 per 0.45 kg. Chemical composition and Warner-Bratzler shear force (WBSF) were also determined. The TC had greater (P &lt; 0.05) fat percentage than SEL and HGRASS, but did not differ (P &gt; 0.05) from HGRAIN. The HGRAIN had greater WBSF values than TC and SEL, which did not differ (P &gt; 0.05); however, HGRASS was similar (P &gt; 0.05) to all other treatments. The TC had greater tenderness and flavor liking scores (P &lt; 0.05) than all other treatments, followed by SEL, HGRASS, and HGRAIN, with a significant difference between each treatment. Honduran consumers assigned greater ratings for tenderness and flavor liking when compared to U.S. consumers. The lowest rated treatment in both countries was Honduran grain-finished followed by Honduran grass-finished. Consumers in Honduras were willing to pay more for samples when compared to U.S. consumers. Consumers were also willing to pay a premium for products with greater palatability, regardless of the country of origin.

Role of myofibers, perimysium and adipocytes in horse meat toughness

Horse meat is a good source of iron with low cholesterol but consumers consider tenderness most important when purchasing meat. Myofibers and intramuscular connective tissue, the main structural components of muscle, play major roles in meat toughness. The effects of myofibers and perimysium characteristics on Warner-Bratzler Shear Force (WBSF) values of horse semimembranosus were investigated on muscles previously assessed as tough (mean WBSF 68.87 ± 3.21 N, n = 8) or tender (mean WBSF 46.21 ± 2.27 N, n = 8). Mean Type IIA myofiber diameter was significantly greater in tender than in tough muscles. Secondary thick perimysium was thicker and collagen fibers more loosely arranged in tender muscles than in tough. A negative correlation was observed between WBSF values and perimysium thickness and a trend between WBSF and intramuscular fat. Adipocytes in perimysium of tender muscles may have contributed to thickening of perimysium and loosened collagen fibers thus contributing to tenderness of the meat.

The effect of 25-hydroxyvitamin D3 and phytase inclusion on pig performance, bone parameters and pork quality in finisher pigs.

The objective of this study was to investigate the effects of supplementing both phytase and 25-hydroxyvitamin D3 (25-OH-D₃) on pig performance, nutrient digestibility, carcass characteristics, bone parameters and pork quality in finisher pigs. The experimental design was a 2×2 factorial comprising of four dietary treatments. One hundred and twenty pigs (60 male, 60 female) were blocked according to live weight and sex and allocated to the following dietary treatments: low P (4.81g/kg) diet (basal) (T1); low P diet + phytase (T2); low P diet + 25-OH-D₃ (T3) and low P diet + phytase + 25-OH-D₃ (T4). Pigs supplemented with phytase had a lower average daily feed intake (ADFI) (2.45kg vs. 2.59kg; p<0.05) and lower feed conversion ratio (FCR) (2.74kg/kg vs. 2.85kg/kg; p<0.05) compared to pigs offered the nonphytase diets. Pigs offered phytase diets had a higher (p<0.05) coefficient of apparent total tract digestibility (CATTD) of ash, phosphorous (P) and calcium (Ca) compared with pigs offered the nonphytase supplemented diets. Pigs offered the 25-OH-D3 diets had a higher CATTD of N and ash. Pigs offered the phytase diets had increased (p<0.05) bone DM, ash, Ca, P and density compared to the nonphytase diets. There was a significant interaction (p<0.05) between phytase and 25-OH-D3 on cook loss. Pigs offered 25-OH-D3 had increased cook loss over the basal diet; however, there was no effect on cook loss when phytase and 25-OH-D3 were offered in combination compared to the phytase only diet. Pigs offered 25-OH-D3 exhibited higher (p<0.05) Warner Bratzler shear force values and lower (p<0.05) pork lightness (L*) surface colorimeter values. In conclusion, there was no benefit to offering a combination of phytase and 25-OH-D3 on pig performance, bone parameters or pork quality.