VP6 Nanotubes Research Articles

Intradermal and intranasal immunizations with oligomeric middle layer rotavirus VP6 induce Th1, Th2 and Th17 T cell subsets and CD4+ T lymphocytes with cytotoxic potential

Rotavirus (RV) inner capsid VP6 protein is a potential non-live vaccine candidate due to high degree of conservation and immunogenicity, and ability to self-assemble into oligomeric structures, including nanotubes. These VP6 structures induce strong humoral and T cell immunity and protect mice against RV challenge. It has been suggested that intracellular neutralization by IgA antibody and VP6-specific CD4+ T cells mediate protection. We investigated generation of diverse CD4+ T cell subsets by intradermal and intranasal delivery of recombinant VP6 (rVP6) nanotubes in BALB/c mice. Production of antiviral cytokine interferon-γ (IFN-γ), interleukin-4 (IL-4) and pro-inflammatory cytokine IL-17 was analyzed following in vitro stimulation of immune cells. Cell surface CD107a expression was measured to determine VP6-specific cytotoxic T cells. Both parenteral and mucosal immunization with oligomeric rVP6 induced VP6-specific Th1, Th2 and Th17 cells. For the first time, cytotoxicity-related degranulation (CD107a surface expression) indicated that RV VP6-specific CD4+ T cells had cytotoxic T lymphocyte (CTL) phenotype. These findings demonstrate an ability of rVP6 nanostructures to induce heterogeneous CD4+ T cells with different effector functions, including CTLs with potential to lyse RV-infected cells, suggesting an additional mechanism of RV VP6-induced protection.

Rotavirus capsid VP6 tubular and spherical nanostructures act as local adjuvants when co-delivered with norovirus VLPs.

SummaryA subunit protein vaccine candidate based on norovirus (NoV) virus‐like particles (VLPs) and rotavirus (RV) VP6 protein against acute childhood gastroenteritis has been proposed recently. RV VP6 forms different oligomeric nanostructures, including tubes and spheres when expressed in vitro, which are highly immunogenic in different animal models. We have shown recently that recombinant VP6 nanotubes have an adjuvant effect on immunogenicity of NoV VLPs in mice. In this study, we investigated if the adjuvant effect is dependent upon a VP6 dose or different VP6 structural assemblies. In addition, local and systemic adjuvant effects as well as requirements for antigen co‐delivery and co‐localization were studied. The magnitude and functionality of NoV GII.4‐specific antibodies and T cell responses were tested in mice immunized with GII.4 VLPs alone or different combinations of VLPs and VP6. A VP6 dose‐dependent adjuvant effect on GII.4‐specific antibody responses was observed. The adjuvant effect was found to be strictly dependent upon co‐administration of NoV GII.4 VLPs and VP6 at the same anatomic site and at the same time. However, the adjuvant effect was not dependent on the types of oligomers used, as both nanotubes and nanospheres exerted adjuvant effect on GII.4‐specific antibody generation and, for the first time, T cell immunity. These findings elucidate the mechanisms of VP6 adjuvant effect in vivo and support its use as an adjuvant in a combination NoV and RV vaccine.

Molecular Docking and Aberration-Corrected STEM of Palladium Nanoparticles on Viral Templates

Viral templates are highly versatile biotemplates used for the synthesis of nanostructured materials. Rotavirus VP6 self-assembles into nanotubular hollow structures with well-defined diameters and variable lengths, serving as a nucleic acid-free biotemplate to synthesize metal nanoparticles of controlled size, shape, and orientation. Molecular docking simulations show that exposed residues (H173-S240-D242 and N200-N310) of VP6 have the ability to specifically bind Pd(II) ions, which serve as nucleation sites for the growth and stabilization of palladium nanoclusters. Using VP6 nanotubes as biotemplates allows for obtaining small Pd particles of 1–5 nm in diameter. Advanced electron microscopy imaging and characterization through ultra-high-resolution field-emission scanning electron microscopy (UHR-FE-SEM) and spherical aberration-corrected scanning transmission electron microscopy (Cs-STEM) at a low voltage dose (80 kV) reveals, with high spatial resolution, the structure of Pd nanoparticles attached to the macromolecular biotemplates.

Rotavirus Recombinant VP6 Nanotubes Act as an Immunomodulator and Delivery Vehicle for Norovirus Virus-Like Particles.

We have recently shown that tubular form of rotavirus (RV) recombinant VP6 protein has an in vivo adjuvant effect on the immunogenicity of norovirus (NoV) virus-like particle (VLP) vaccine candidate. In here, we investigated in vitro effect of VP6 on antigen presenting cell (APC) activation and maturation and whether VP6 facilitates NoV VLP uptake by these APCs. Mouse macrophage cell line RAW 264.7 and dendritic cell line JAWSII were used as model APCs. Internalization of VP6, cell surface expression of CD40, CD80, CD86, and major histocompatibility class II molecules, and cytokine and chemokine production were analyzed. VP6 nanotubes were efficiently internalized by APCs. VP6 upregulated the expression of cell surface activation and maturation molecules and induced secretion of several proinflammatory cytokines and chemokines. The mechanism of VP6 action was shown to be partially dependent on lipid raft-mediated endocytic pathway as shown by methyl-β-cyclodextrin inhibition on tumor necrosis factor α secretion. These findings add to the understanding of mechanism by which VP6 exerts its immunostimulatory and immunomodulatory actions and further support its use as a part of nonlive RV-NoV combination vaccine.

Rotavirus capsid VP6 protein acts as an adjuvant in vivo for norovirus virus-like particles in a combination vaccine

ABSTRACTRotavirus (RV) and norovirus (NoV) are the 2 leading causes of acute viral gastroenteritis worldwide. We have developed a non-live NoV and RV vaccine candidate consisting of NoV virus-like particles (VLPs) and recombinant polymeric RV VP6 protein produced in baculovirus-insect cell expression system. Both components have been shown to induce strong potentially protective immune responses. As VP6 nanotubes are highly immunogenic, we investigated here a possible adjuvant effect of these structures on NoV-specific immune responses in vivo. BALB/c mice were immunized intramuscularly with a suboptimal dose (0.3 μg) of GII.4 or GI.3 VLPs either alone or in a combination with 10 μg dose of VP6 and induction of NoV-specific antibodies in sera of experimental animals were measured. Blocking assay using human saliva or synthetic histo-blood group antigens was employed to test NoV blocking antibodies. Suboptimal doses of the VLPs alone did not induce substantial anti-NoV antibodies. When co-administered with the VP6, considerable titers of not only type-specific but also cross-reactive IgG antibodies against NoV VLP genotypes not included in the vaccine composition were induced. Most importantly, NoV-specific blocking antibodies, a surrogate for neutralizing antibodies, were generated. Our results show that RV VP6 protein has an in vivo adjuvant effect on NoV-specific antibody responses and support the use of VP6 protein as a part of the NoV-RV combination vaccine, especially when addition of external adjuvants is not desirable.

Modulating the physicochemical and structural properties of gold-functionalized protein nanotubes through thiol surface modification.

Biomolecules are advantageous scaffolds for the synthesis and ordering of metallic nanoparticles. Rotavirus VP6 nanotubes possess intrinsic affinity to metal ions, a property that has been exploited to synthesize gold nanoparticles over them. The resulting nanobiomaterials have unique properties useful for novel applications. However, the formed nanobiomaterials lack of colloidal stability and flocculate, limiting their functionality. Here we demonstrate that it is possible to synthesize thiol-protected gold nanoparticles over VP6 nanotubes, which resulted in soluble nanobiomaterials. With this strategy, it was possible to modulate the size, colloidal stability, and surface plasmon resonance of the synthesized nanoparticles by controlling the content of the thiolated ligands. Two types of water-soluble ligands were tested, a small linear ligand, sodium 3-mercapto-1-propanesulfonate (MPS), and a bulky ligand, 5-mercaptopentyl β-D-glucopyranoside (GlcC5SH). The synthesized nanobiomaterials had a higher stability in suspension, as determined by Z-potential measurements. To the extent of our knowledge, this is the first time that a rational strategy is developed to modulate the particular properties of metal nanoparticles in situ synthesized over a protein bioscaffold through thiol coating, achieving a high spatial and structural organization of nanoparticles in a single integrative hybrid structure.

Characterization of conductive nanobiomaterials derived from viral assemblies by low-voltage STEM imaging and Raman scattering

New technologies require the development of novel nanomaterials that need to be fully characterized to achieve their potential. High-resolution low-voltage scanning transmission electron microscopy (STEM) has proven to be a very powerful technique in nanotechnology, but its use for the characterization of nanobiomaterials has been limited. Rotavirus VP6 self-assembles into nanotubular assemblies that possess an intrinsic affinity for Au ions. This property was exploited to produce hybrid nanobiomaterials by the in situ functionalization of recombinant VP6 nanotubes with gold nanoparticles. In this work, Raman spectroscopy and advanced analytical electron microscopy imaging with spherical aberration-corrected (Cs) STEM and nanodiffraction at low-voltage doses were employed to characterize nanobiomaterials. STEM imaging revealed the precise structure and arrangement of the protein templates, as well as the nanostructure and atomic arrangement of gold nanoparticles with high spatial sub-Angstrom resolution and avoided radiation damage. The imaging was coupled with backscattered electron imaging, ultra-high resolution scanning electron microscopy and x-ray spectroscopy. The hybrid nanobiomaterials that were obtained showed unique properties as bioelectronic conductive devices and showed enhanced Raman scattering by their precise arrangement into superlattices, displaying the utility of viral assemblies as functional integrative self-assembled nanomaterials for novel applications.

Effect of metal catalyzed oxidation in recombinant viral protein assemblies

BackgroundProtein assemblies, such as virus-like particles, have increasing importance as vaccines, delivery vehicles and nanomaterials. However, their use requires stable assemblies. An important cause of loss of stability in proteins is oxidation, which can occur during their production, purification and storage. Despite its importance, very few studies have investigated the effect of oxidation in protein assemblies and their structural units. In this work, we investigated the role of in vitro oxidation in the assembly and stability of rotavirus VP6, a polymorphic protein.ResultsThe susceptibility to oxidation of VP6 assembled into nanotubes (VP6NT) and unassembled VP6 (VP6U) was determined and compared to bovine serum albumin (BSA) as control. VP6 was more resistant to oxidation than BSA, as determined by measuring protein degradation and carbonyl content. It was found that assembly protected VP6 from in vitro metal-catalyzed oxidation. Oxidation provoked protein aggregation and VP6NT fragmentation, as evidenced by dynamic light scattering and transmission electron microscopy. Oxidative damage of VP6 correlated with a decrease of its center of fluorescence spectral mass. The in vitro assembly efficiency of VP6U into VP6NT decreased as the oxidant concentration increased.ConclusionsOxidation caused carbonylation, quenching, and destruction of aromatic amino acids and aggregation of VP6 in its assembled and unassembled forms. Such modifications affected protein functionality, including its ability to assemble. That assembly protected VP6 from oxidation shows that exposure of susceptible amino acids to the solvent increases their damage, and therefore the protein surface area that is exposed to the solvent is determinant of its susceptibility to oxidation. The inability of oxidized VP6 to assemble into nanotubes highlights the importance of avoiding this modification during the production of proteins that self-assemble. This is the first time that the role of oxidation in protein assembly is studied, evidencing that oxidation should be minimized during the production process if VP6 nanotubes are required.

Understanding internalization of rotavirus VP6 nanotubes by cells: towards a recombinant vaccine

Rotavirus VP6 nanotubes are an attractive option for a recombinant vaccine against rotavirus disease. Protection against rotavirus infection and an adjuvant effect have been observed upon immunization with VP6 nanotubes. However, little information exists on how VP6 nanotubes interact with cells and trigger an immune response. In this work, the interaction between VP6 nanotubes and different cell lines was characterized. VP6 nanotubes were not cytotoxic to any of the animal or human cell lines tested. Uptake of nanotubes into cells was cell-line-dependent, as only THP1 and J774 macrophage cells internalized them. Moreover, the size and spatial arrangement of VP6 assembled into nanotubes allowed their uptake by macrophages, as double-layered rotavirus-like particles also displaying VP6 in their surface were not taken up. The internalization of VP6 nanotubes was inhibited by methyl-β-cyclodextrin, but not by genistein, indicating that nanotube entry is specific, depends on the presence of cholesterol in the plasma membrane, and does not require the activity of tyrosine kinases. The information generated here expands our understanding of the interaction of protein nanotubes with cells, which is useful for the application of VP6 nanotubes as a vaccine.

Structural Characterization of Rotavirus-Directed Synthesis and Assembly of Metallic Nanoparticle Arrays

Self-assembled structures derived of viral proteins display sophisticated structures that are difficult to obtain with even advanced synthesis methods and the use of protein nanotubes for synthesis and organization of inorganic nanoarrays into well-defined architectures are here reported. Nanoparticle arrays derived of rotavirus VP6 nanotubes were synthesized by in situ functionalization with silver and gold nanoparticles. The size and morphology of metal nanoparticles were characterized by transmission electron microscopy (TEM) and high resolution TEM (HR-TEM). Processing of micrographs to obtain fast Fourier transforms (FFT) patterns of nanoparticles shown that the preferred morphologies are fcc-like and multiple twinned ones. Micrographs were used to assign structure and orientation, and the elemental composition analysis was performed with energy dispersive spectroscopy (EDS). Structural characterization of functionalized rotavirus VP6 demonstrated its utility for directed construction of hybrid anisotropic nanomaterials formed by arrays of metallic nanoparticles.

Strategies for specifically directing metal functionalization of protein nanotubes: constructing protein coated silver nanowires

Biological molecules that self-assemble in the nanoscale range are useful multifunctional materials. Rotavirus VP6 protein self-assembles into tubular structures in the absence of other rotavirus proteins. Here, we present strategies for selectively directing metal functionalization to the lumen of VP6 nanotubes. The specific in situ metal reduction in the inner surface of nanotube walls was achieved by the simple modification of a method previously reported to functionalize the nanotube outer surface. Silver nanorods and nanowires as long as 1.5 μm were formed inside the nanotubes by coalescence of nanoparticles. Such one-dimensional structures were longer than others previously obtained using bioscaffolds. The interactions between silver ions and the nanotube were simulated to understand the conditions that allowed nanowire formation. Molecular docking showed that a naturally occurring arrangement of aspartate residues enabled the stabilization of silver ions on the internal surface of the VP6 nanotubes. This is the first time that such a spatial arrangement has been proposed for the nucleation of silver nanoparticles, opening the possibility of using such an array to direct functionalization of other biomolecules. These results demonstrate the natural capabilities of VP6 nanotubes to function as a versatile biotemplate for nanomaterials.

Strategies for the purification and characterization of protein scaffolds for the production of hybrid nanobiomaterials

Rotavirus VP6 self-assembles into high order macrostructures useful as novel scaffolds for the construction of multifunctional hybrid nanobiomaterials. This application requires large quantities of high quality pure material with strict structural consistency. Strategies for obtaining high quality recombinant VP6 and different characterization techniques are explored and compared in this work. VP6 was expressed in the insect cell–baculovirus system. VP6 assemblies were selectively purified utilizing an ion exchange and size exclusion (SE) chromatography. Purification steps were monitored and characterized by dynamic light scattering (DLS), ELISA, SDS-PAGE, HPLC and Western blot. DLS showed that the initial ultrafiltration step removed small particles, the intermediate anion exchange chromatographic step completely removed the baculovirus, whereas the final size exclusion chromatography permitted the selective recovery of correctly assembled VP6 nanotubes and discrimination of non-assembled VP6, as confirmed by transmission electron microscopy. VP6 assembled into tubular structures with diameter of 75 nm and several nanometers in length. The purification yield was 20% of multimeric assemblies with a purity >98%. The resulting material was suitable for the production of functionalized hybrid nanobiomaterials through in situ synthesis of metallic nanoparticles.

Use of recombinant rotavirus VP6 nanotubes as a multifunctional template for the synthesis of nanobiomaterials functionalized with metals

The structural characteristics and predefined constant size and shape of viral assemblies make them useful tools for nanobiotechnology, in particular as scaffolds for constructing highly organized novel nanomaterials. In this work it is shown for the first time that nanotubes formed by recombinant rotavirus VP6 protein can be used as scaffolds for the synthesis of hybrid nanocomposites. Rotavirus VP6 was produced by the insect cell-baculovirus expression vector system. Nanotubes of several micrometers in length and various diameters in the nanometer range were functionalized with Ag, Au, Pt, and Pd through strong (sodium borohydride) or mild (sodium citrate) chemical reduction. The nanocomposites obtained were characterized by transmission electron microscopy (TEM), high-resolution TEM (HRTEM) with energy dispersive spectroscopy (EDS), dynamic light scattering, and their characteristic plasmon resonance. The outer surface of VP6 nanotubes had intrinsic affinity to metal deposition that allowed in situ synthesis of nanoparticles. Furthermore, the use of preassembled recombinant protein structures resulted in highly ordered integrated materials. It was possible to obtain different extents and characteristics of the metal coverage by manipulating the reaction conditions. TEM revealed either a continuous coverage with an electrodense thin film when using sodium citrate as reductant or a discrete coverage with well-dispersed metal nanoparticles of diameters between 2 and 9 nm when using sodium borohydride and short reaction times. At long reaction times and using sodium borohydride, the metal nanoparticles coalesced and resulted in a thick metal layer. HRTEM-EDS confirmed the identity of the metal nanoparticles. Compared to other non-recombinant viral scaffolds used until now, the recombinant VP6 nanotubes employed here have important advantages, including a longer axial dimension, a dynamic multifunctional hollow structure, and the possibility of producing them massively by a safe and efficient bioprocess. Such characteristics confer important potential applications in nanotechnology to the novel nanobiomaterials produced here.