Volume Phase Transition Temperature Research Articles

Pickering emulsions for stimuli-responsive transdermal drug delivery: effect of rheology and microstructure on performance.

This work investigates the design of stimuli-responsive Pickering emulsions (PEs) for transdermal drug delivery applications, by exploring the impact of stabilising microgels size and interactions on their rheological and release properties. Temperature-responsive poly(N-isopropylacrylamide) microgels modified with 1-benzyl-3-vinylimidazolium bromide (pNIPAM-co-BVI) are synthesized in varying sizes and used to stabilise jojoba oil-in-water concentrated emulsions. The results reveals two distinct behaviours: for small microgels (∼300 nm), the PEs exhibit a smooth, uniform structure characterised by a mild yield stress, characteristic of soft glassy systems. Conversely, larger microgels (∼800 nm) induce droplet clustering, resulting in increased elasticity and a more complex yielding process. Interestingly, transdermal delivery tests demonstrate that microstructure, rather than bulk rheology, governs sustained drug release. The release process can be modelled as diffusion-controlled transport through a porous medium with random traps. At room temperature, the trap size corresponds to the droplet size, and the release time scales with the total dispersed phases volume fraction. However, at physiological temperature (37 °C), above the volume-phase transition temperature of the microgels, the release time increases significantly. The trap size approaches the microgel size, suggesting that microgel porosity becomes the dominant factor controlling drug release. Overall, the results highlight the critical role of microstructure design in optimising stimuli-responsive PEs for controlled transdermal drug delivery.

Phase Transition Behaviors of Poly(N-isopropylacrylamide) Nanogels with Different Compositions Induced by (−)-Epigallocatechin-3-gallate and Ethyl Gallate

Phase transition behaviors of poly(N-isopropylacrylamide) nanogels with different compositions induced by (−)-epigallocatechin-3-gallate (EGCG) and ethyl gallate (EG) has been investigated systematically. Monodisperse poly(N-isopropylacrylamide-co-N-hydroxymethyl acrylamide) (P(NIPAM-co-NMAM)) and poly(N-isopropylacrylamide-co-2-hydroxyethyl methacrylate) (P(NIPAM-co-HEMA)) nanogels with different feeding monomer ratios were prepared by emulsion polymerization. P(NIPAM-co-NMAM) nanogels exhibit rapid isothermal phase transition behavior in EGCG solutions with low concentration (10−3 mol/L) in less than 10 minutes. The thermosensitive phase transition behaviors of nanogels are affected not only by the copolymerized monomers but also by the concentrations of EGCG and EG in aqueous solutions. Nanogels remain in a shrunken state and do not exhibit thermosensitive phase transition behaviors in EGCG solutions (≥5 mmol/L), whereas they display thermo-responsive phase transition behaviors in EG solutions. The volume phase transition temperature (VPTT) shifts to lower temperatures with increasing EG concentration. The diameters of P(NIPAM-co-NMAM) nanogels decrease with increasing EG concentration at temperatures between 29 and 33 °C. In contrast, the diameters of P(NIPAM-co-HEMA) nanogels increase with increasing EGCG concentration at temperatures between 37 and 45 °C. The results demonstrate the potential of nanogels for simple detection of EG and EGCG concentrations in aqueous solutions over a wide temperature range, and EGCG can serve as a signal for the burst-release of drugs from the P(NIPAM-co-NMAM)-based carriers at physiological temperature.

4D Printing Nanocomposite Hydrogel Based on PNIPAM and Prussian Blue Nanoparticles Using Stereolithography

AbstractThe potential of photoactive Prussian blue nanoparticles dispersed in thermo‐responsive PNIPAM hydrogels in 4D printing using a stereolithography is investigated with digital light processing. The proportion of Prussian blue nanoparticles used in the resin is chosen to deliver a significant photothermal effect providing a heating above the volume phase transition temperature of the final nanocomposite hydrogels; while, giving only a limited effect on light scattering during the 3D printing process. Four formulations with various amounts of Prussian blue nanoparticles are used to print 3D structures with different shapes, such as Aztec pyramids, cylinders, gyroid porous cubes, and porous films. The shrinkage effect triggered by light irradiation at 808 nm on the as‐obtained nanocomposite hydrogels is demonstrated through the delivery of a representative molecule fluorescein and a triggered 4D shape‐morphing effect.

A Phase Field Study of the Influence of External Loading on the Dynamics of Martensitic Phase Transformation

An elastoplastic phase field model was employed for simulations to investigate the influence of external loading on the martensitic phase transformation kinetics in steel. The phase field model incorporates external loading and plastic deformation. During the simulation process, the authenticity of the phase field model is ensured by introducing the relevant physical parameters and comparing them with experimental data. During the calculations, loads of various magnitudes and loading conditions were considered. An analysis and discussion were conducted concerning the volume fraction and phase transition temperature during the phase transformation process. The simulation results prominently illustrate the preferential orientation of variants under different loading conditions. This model can be applied to the qualitative phase transition evolution of Fe-Ni alloys, and the crystallographic parameters adhere to the volume expansion effect. It is concluded that uniaxial loading promotes martensitic phase transformation, while triaxial compressive loading inhibits it. From a dynamic perspective, it is demonstrated that external uniaxial loading accelerates the kinetics of martensitic phase transformation, with uniaxial compression being more effective in accelerating the phase transformation process than uniaxial tension. When compared to experimental data, the simulation results provide evidence that under the influence of external loading, the martensitic phase transformation is significantly influenced by the applied load, with the impact of external loading being more significant than that of plastic effects.

LuMA-Functionalized Thermosensitive Hydrogel: A Versatile and Robust Dopamine-Triggered Platform for Diverse Biomolecules Sensing.

It is of great significance for the analysis of multiple biomarkers because a single biomarker is difficult to accurately achieve early diagnosis, disease course monitoring, and prognosis evaluation. Herein, a luminescence thermosensitive hydrogel was synthesized by radical polymerization using a methacrylic acid derivative monomer of luminol (LuMA) as luminescent, N-isopropylacrylamide (NIPAM) as thermosensitive monomer, and acrydite-oligonucleotides [dopamine (DA) aptamer, DNA C1, and DNA C2] as recognition elements. The combined DA based on the affinity interaction between the DA and the aptamer on the hydrogel polymer chain was electrochemically oxidized to dopamine quinone during the electrochemiluminescence (ECL) scanning, which effectively quenched the ECL signal of LuMA due to the resonance energy transfer (RET). In addition, the thermosensitive hydrogel showed swelling-collapse characteristics when the temperature was below and above the volume phase transition temperature. Undergoing the collapse process initiated by the temperature, the RET efficiency was further enhanced due to the shortened distance between the energy donor and acceptor, showing a 1.4 times signal amplification and achieving sensitive detection of DA with a limit of detection (LOD) of 1.7 × 10-10 M. For a proof of concept application, coupled with the target-induced release of DA from the DNA-magnetic beads bioconjugations based on duplex-specific nuclease (DSN)-assisted target recycling amplification strategy and DNAzyme cleavage reaction, this ECL-RET approach was successfully used to evaluate multiple targets including miRNA-141 and MUC1 with the LOD of 2.5 aM and 1.6 fg/mL, respectively. The excellent performances of the versatile and robust ECL-RET hydrogel in multiple target sensing showed potential applications in clinical diagnosis and disease therapeutic assay.

Multi-responsive P(DMAEMA-co-COU) hydrogel for temperature sensor and information encryption

Multi-responsive hydrogels for temperature sensor and information encryption were developed through the synergistic application of light, temperature and pH response of the hydrogel. The multi-responsive hydrogels were prepared by copolymerization of dimethylaminoethyl methacrylate (DMAEMA) and 7-(2-methacryloyloxyethoxy)-4-methylcoumarin (CoumMAc). Through incorporating coumarin groups into the hydrogels, the crosslinking degree of hydrogels could be increased by photo-crosslinking of polymer chains based on the photodimerization of coumarin groups. After the hydrogel was irradiated by a photomask under UV light (365 nm), the irradiated and unirradiated region in the hydrogel showed different crosslinking degrees, leading to different volume phase transition temperature (VPTT) in the two region of the hydrogel. The pattern in the hydrogel appeared only within a specific temperature range, and the temperature of the environment can be monitored by the prepared hydrogel sensor. After soaking the patterned hydrogel in the acidic solution, no pattern information was displayed at all temperatures, and the pattern information can only emerge by dual decryption (base and temperature). In addition, the information can be erased by UV light (254 nm), which further ensures information security. This work provide a new way for low-cost unpowered temperature sensors and information encryption with more security.

Photoinduced Mechanical Cloaking of Diarylethene-Crosslinked Microgels.

The serial connection of multiple stimuli-responses in polymer architectures enables the logically conjunctive gating of functional material processes on demand. Here, a photoswitchable diarylethene (DAE) acts as a crosslinker in poly(N-vinylcaprolactam) microgels and allows the light-induced shift of the volume phase-transition temperature (VPTT). While swollen microgels below the VPTT are susceptible to force and undergo breakage-aggregation processes, collapsed microgels above the VPTT stay intact in mechanical fields induced by ultrasonication. Within a VPTT shift regime, photoswitching of the DAE transfers microgels from the swollen to the collapsed state and thereby gates their response to force as demonstrated by the light-gated activation of an embedded fluorogenic mechanophore. This photoinduced mechanical cloaking system operates on the polymer topology level and is thereby principally universally applicable.

Dynamic Behavior of Heavy Water Inside and Outside of Poly (N-Isopropylacrylamide) (PNIPAM) Microgel Using Broadband Dielectric Spectroscopy

One pot free radical precipitation polymerization was used to synthesize an aqueous suspension of non-ionic poly ( <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">N</i> -isopropylacrylamide) [PNIPAM] microgel particles. For dielectric measurements in the frequency range of 100 MHz to 50 GHz and temperature range of 288 K to 323 K, 10 wt. % of freeze-dried PNIPAM microgels dispersed in heavy water were used. The relaxation process was seen at around 15 GHz, which corresponds to the entire rotational motion of the heavy water, both within and outside the microgel. Furthermore, in the high frequency relaxation spectrum, heavy water outside the microgel (h1-process with a relaxation time of h1, τ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">h1</sub> , fixed as that of pure heavy water) and confined heavy water within the microgel (h2-process with a relaxation time of h2, τ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">h2</sub> ) were evaluated in view of the two-water model’s assumption and contribution. Under volume phase transition temperature (VPTT), τ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">h2</sub> is about 4 to 5 times larger than τ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">h1</sub> , and it does not change much even though the temperature is raised. However, τ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">h2</sub> rapidly increases above VPTT from 7 to 14, which reveals that the dynamics of heavy water are severely constrained inside the shrunken state of the PNIPAM microgel. The obtained results are compared to the dynamics of pure water in PNIPAM microgels aqueous suspension to better understand the effect of deuterium substitution for hydrogen on the dynamics of heavy water inside and outside of PNIPAM microgels.

Modified Sulfanilamide Release from Intelligent Poly(N-isopropylacrylamide) Hydrogels.

The aim of this study was to examine homopolymeric poly(N-isopropylacrylamide), p(NIPAM), hydrogels cross-linked with ethylene glycol dimethacrylate as carriers for sulfanilamide. Using FTIR, XRD and SEM methods, structural characterization of synthesized hydrogels before and after sulfanilamide incorporation was performed. The residual reactants content was analyzed using the HPLC method. The swelling behavior of p(NIPAM) hydrogels of different crosslinking degrees was monitored in relation to the temperature and pH values of the surrounding medium. The effect of temperature, pH, and crosslinker content on the sulfanilamide release from hydrogels was also examined. The results of the FTIR, XRD, and SEM analysis showed that sulfanilamide is incorporated into the p(NIPAM) hydrogels. The swelling of p(NIPAM) hydrogels depended on the temperature and crosslinker content while pH had no significant effect. The sulfanilamide loading efficiency increased with increasing hydrogel crosslinking degree, ranging from 87.36% to 95.29%. The sulfanilamide release from hydrogels was consistent with the swelling results-the increase of crosslinker content reduced the amount of released sulfanilamide. After 24 h, 73.3-93.5% of incorporated sulfanilamide was released from the hydrogels. Considering the thermosensitivity of hydrogels, volume phase transition temperature close to the physiological temperature, and the satisfactory results achieved for sulfanilamide incorporation and release, it can be concluded that p(NIPAM) based hydrogels are promising carriers for sulfanilamide.

Synthesis of thermoresponsive PNIPAm nanogel adsorbent by microwave-assisted polymerization for wastewater treatment application

This research demonstrated the fast synthesis technique using microwave-assisted polymerization for the preparation of thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) nanogel which was to be used for paraquat pesticide adsorption. PNIPAm nanogel was synthesized by free-radical polymerization in an aqueous solution using water-soluble ammonium peroxodisulfate (APS) and N,Ń-methylenebisacrylamide (BIS) as initiators and cross-linker, respectively. Microwave irradiation was used as an alternative heating technique and its efficiency was compared to that of the conventional heating method. The results showed that reaction time could be greatly shortened from several hours to only 20 min with the yield of PNIPAm nanogel of approximately 65 % using microwave heating method. The FTIR analysis confirmed that microwave irradiation did not alter the chemical structure of PNIPAm nanogel. The cross-linker concentrations and the sequence of cross-linker addition affected the hydrodynamic diameter of PNIPAm nanogel. The hydrodynamic diameter of swollen PNIPAm nanogels at 25 °C decreased as increasing the cross-linker concentrations and then further decreased when the cross-linker was added after 10 min of the irradiation time. Besides, all PNIPAm nanogel showed well thermoresponsive reversibility over 5 cycles, across the volume phase transition temperature (VPTT) at around 32 °C. The adsorption and release mechanisms of the paraquat took advantage of the phase transition change (swelling-collapse) in response to temperature stimuli, respectively. The PNIPAm nanogel synthesized from the microwave heating method had a profound effect on paraquat adsorption, having 60 – 70 % adsorption with a paraquat release of around 35 – 45 %. These results demonstrated that PNIPAm nanogels could be used as an alternative adsorbent material for industrial wastewater treatment.

PH Modulated Formation of Complexes with Various Stoichiometry between Polymer Network and Fe(III) in Thermosensitive Gels Modified with Gallic Acid.

Thermoresponsive gels based on N-isopropylacrylamide functionalized with amino groups were modified with gallic acid, with gallate (3,4,5-trihydroxybenzoic) groups being introduced into the polymer network. We investigated how the properties of these gels were affected at varying pH, by the formation of complexes between the polymer network of the gels and Fe3+ ions (which form stable complexes with gallic acid, exhibiting 1:1, 1:2, or 1:3 stoichiometry, depending on pH). The formation of complexes with varying stoichiometry within the gel was confirmed using UV-Vis spectroscopy, and the influence of such complexes on swelling behavior and volume phase transition temperature were investigated. In the appropriate temperature range, complex stoichiometry was found to strongly affect the swelling state. Changes in the pore structure and mechanical properties of the gel caused by the formation of complexes with varying stoichiometry were investigated using scanning electron microscopy and rheological measurements, respectively. The volume changes exhibited by p(NIPA-5%APMA)-Gal-Fe gel were found to be greatest at close to human body temperature (~38 °C). Modification of thermoresponsive pNIPA gel with gallic acid opens new opportunities for the development of pH- and thermosensitive gel materials.

KCl-Modulated Hydration and Subsequent Thermoresponsive Behavior of Poly(sulfobetaine)-Based Diblock Copolymer Thin Films

The KCl-modulated swelling of double thermoresponsive diblock copolymer (DBC) thin films in D2O atmosphere and their subsequent responsive behavior are investigated via spectral reflectance (SR), in situ time-of-flight neutron reflectometry (ToF-NR), and Fourier-transform infrared (FT-IR) spectroscopy. The copolymer consists of a short zwitterionic (poly(4-(N-(3-methacrylamidopropyl)-N,N-dimethylammonio) butane-1-sulfonate)) (PSBP) block and a long non-ionic poly(N-isopropylmethacrylamide) (PNIPMAM) block. DBC thin films are prepared via spin-coating from solutions containing 5 mM or devoid of KCl. The addition of KCl to the DBC thin films leads to a higher swelling ratio and D2O content during vapor treatment with D2O. Upon the subsequent heating of the hydrated DBC films, the films swell further and reach a maximum thickness before contracting. Two separate volume phase transition temperatures (VPTTs) are observed, namely where a further swelling plateau is reached (VPTTfs), and where contraction starts (VPTTc). Based on complementary SR studies of the effect of KCl on the swelling behavior of the respective PSBP and PNIPMAM homopolymer thin films, we conclude that the “further-swelling” period is mainly a consequence of the UCST-type phase transition of PSBP, whereas the “film contraction” period is due to the LCST-type phase transition of PNIPMAM in thin-film geometry. We observe that KCl reduces the VPTTc of the PNIPMAM blocks. Moreover, the salt migrates or aggregates inside the thin film upon heating, thereby forming a KCl enrichment layer in the intermediate section of the film. Furthermore, the observations by FT-IR prove that macroscopic and mesoscopic D2O absorption and desorption are correlated with the effect of KCl on hydration and de-hydration of the hydrophilic groups.

Hot Brownian Motion of Thermoresponsive Microgels in Optical Tweezers Shows Discontinuous Volume Phase Transition and Bistability.

Microgels are soft microparticles that often exhibit thermoresponsiveness and feature a transformation at a critical temperature, referred to as the volume phase transition temperature. Whether this transformation occurs as a smooth or as a discontinuous one is still a matter of debate. This question can be addressed by studying individual microgels trapped in optical tweezers. For this aim, composite particles are obtained by decorating Poly-N-isopropylacrylamide (pNIPAM) microgels with iron oxide nanocubes. These composites become self-heating when illuminated by the infrared trapping laser, performing hot Brownian motion within the trap. Above a certain laser power, a single decorated microgel features a volume phase transition that is discontinuous, while the usual continuous sigmoidal-like dependence is recovered after averaging over different microgels. The collective sigmoidal behavior enables the application of a power-to-temperature calibration and provides the effective drag coefficient of the self-heating microgels, thus establishing these composite particles as potential micro-thermometers and micro-heaters. Moreover, the self-heating microgels also exhibit an unexpected and intriguing bistability behavior above the critical temperature, probably due to partial collapses of the microgel. These results set the stage for further studies and the development of applications based on the hot Brownian motion of soft particles.

Microgel-enhanced thermal-sensitive hydrogel electrolyte enables active heat management, controllable energy storage and mechanical flexibility of supercapacitors

Thermal runaway is a critical issue in energy storage process, leading to damage even failure of energy storage devices. Herein, active heat management, controllable energy storage and mechanical flexibility of supercapacitors are achieved by utilizing microgel-enhanced thermal-sensitive hydrogels as electrolytes. Because of the improved thermal sensitivity of microgel-enhanced hydrogel electrolyte, heat can be efficiently consumed by volume phase transition process, and meanwhile the energy storage process is also weakened by slowing down the ion transport. Reversibly controlled energy storage is also demonstrated in such supercapacitors. By varying temperature below and above volume phase transition temperature (VPTT) of hydrogel electrolytes, the specific capacitance is switched between 124 mF cm−2 and 9 mF cm−2. Moreover, the hydrogel electrolytes also endow such supercapacitors mechanical flexibility and stable charge–discharge under a bending angle from 0 to 180° has been demonstrated. Overall, this work has provided a new clue to construct intelligent hydrogel devices by elegant structure design.

Poly(N-vinylcaprolactam)-Gold Nanorods-5 Fluorouracil Hydrogels: In the Quest of a Material for Topical Therapies against Melanoma Skin Cancer.

Chemically crosslinked hydrogels based on poly(N-vinylcaprolactam) (PNVCL) were synthetized by a photoinitiated chemical method. A galactose-based monomer, 2-lactobionamidoethyl methacrylate (LAMA), and N-vinylpyrrolidone (NVP) were added with the aim to improve the physical and chemical properties of hydrogels. The effects of both comonomers on the swelling ratio (Q), volume phase transition temperature (VPTT), glass transition temperature (Tg), and Young's moduli by mechanical compression below and above the VPTT were studied. Gold nanorods (GNRDs) and 5-fluorouracil (5FU) were embedded into the hydrogels, to study the drug release profiles with and without the excitation of GNRDs by irradiation in the near-infrared region (NIR). Results showed that the addition of LAMA and NVP increased the hydrogels' hydrophilicity, elasticity, and VPTT. The loading of GNRDs in the hydrogels changed the release rate of 5FU when irradiated intermittently with an NIR laser. The present study reports on the preparation of a hydrogel-based platform of PNVCL-GNRDs-5FU as a potential hybrid anticancer hydrogel for chemo/photothermal therapy that could be applied against skin cancer for topical 5FU delivery.

Thermal Lens Measurements of Thermal Expansivity in Thermosensitive Polymer Solutions

The weak absorption of a laser beam generates in a fluid an inhomogeneous refractive index profile acting as a negative lens. This self-effect on beam propagation, known as Thermal Lensing (TL), is extensively exploited in sensitive spectroscopic techniques, and in several all-optical methods for the assessment of thermo-optical properties of simple and complex fluids. Using the Lorentz-Lorenz equation, we show that the TL signal is directly proportional to the sample thermal expansivity α, a feature allowing minute density changes to be detected with high sensitivity in a tiny sample volume, using a simple optical scheme. We took advantage of this key result to investigate the compaction of PniPAM microgels occurring around their volume phase transition temperature, and the temperature-driven formation of poloxamer micelles. For both these different kinds of structural transitions, we observed a significant peak in the solute contribution to α, indicating a decrease in the overall solution density-rather counterintuitive evidence that can nevertheless be attributed to the dehydration of the polymer chains. Finally, we compare the novel method we propose with other techniques currently used to obtain specific volume changes.

Redox-responsive degradable microgel modified with superparamagnetic nanoparticles exhibiting controlled, hyperthermia-enhanced drug release

A novel degradable microgel based on poly(N-isopropylacrylamide) (pNIPA) cross-linked with N,N’-bisacryloylcystine (BISS) and containing superparamagnetic iron oxide nanoparticles (SPION@CA) was synthesized by semi-batch precipitation polymerization and examined as a potential hyperthermia-enhanced drug carrier. The pNIPA provided the microgel with temperature sensitivity, the BISS was responsible for degradation in the presence of glutathione (GSH) (an –S–S–bond reductor naturally present in cells), while the SPION@CA permitted remote control of temperature to improve drug release. The microgels exhibited volume phase transition temperature at ca. 34 °C, which is near the human body temperature, and were stable across a wide range of temperatures and ionic strengths, as well as in the blood plasma at 37 °C. It was found that the presence of SPION@CA in the polymer network of the microgels enabled the temperature to be increased up to 42 °C by an alternating magnetic field, and that increasing the temperature from 37 to 42 °C significantly enhanced the releasing of the anticancer drug doxorubicin (DOX). The highest DOX release (82%) was observed at pH 5, 42 °C, and in the presence of GSH, and the lowest (20%) at pH 7.4, 37 °C, and in the absence of GSH. MTT assay indicated that compared to free doxorubicin, the microgel particles loaded with doxorubicin have comparable cytotoxicity against MCF-7 cancer cells while being significantly less toxic to MCF-10A healthy cells.Graphical abstract

Conductive and Thermo-Responsive Composite Hydrogels with Poly(N-isopropylacrylamide) and Carbon Nanotubes Fabricated by Two-Step Photopolymerization.

Biocompatible and conductive polymer hydrogels are the subject of intensive research in the bioengineering field because of their use in bioelectronic devices and for the fabrication of electro-responsive tissues and drug delivery systems. In this study, we report the synthesis of conductive composite hydrogels consisting of a poly(N-isopropylacrylamide) (PNIPAM) matrix embedding carboxyl-functionalized multi-walled carbon nanotubes (MWCNT-COOH) using a two-step photopolymerization method. Thermo-responsive hydrogels with controlled hydrophilicity and conductivity were prepared by varying the carbon nanotube concentration in the range 0.5-3 wt%. The thermal response of the PNIPAM-based composite hydrogels was measured by differential scanning calorimetry with both ultrapure water and PBS solution as swelling liquid. Results show that the endothermic peak associated with the temperature-induced volume phase transition (VPT) shifts to higher temperatures upon increasing the concentration of the nanotubes, indicating that more energy is required to dissociate the hydrogen bonds of the polymer/filler network. In PBS solution, the swelling ratios and the VPT temperatures of the composite hydrogels are reduced because of salt-induced screening of the oppositely charged polymer/filler assembly, and the electrical resistivity decreases by a factor of 10 with respect to the water-swollen hydrogels.

Temperature-Modulated Changes in Thin Gel Layer Thickness Triggered by Electrochemical Stimuli.

A series of thermoresponsive hydrogels containing positively charged groups in the polymeric network were synthesized and modified with the electroactive compound 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS). ABTS, which forms a dianion in aqueous solutions, acts as an additional physical cross-linker and strongly affects the swelling ratio of the gels. The influence of the amount of positively charged groups and ABTS oxidation state on the volume phase transition temperature was investigated. A hydrogel that possesses a relatively wide and well-defined temperature window (the temperature range where changes in the ABTS oxidation state affects the swelling ratio significantly) was found. The influence of the presence and oxidation state of ABTS on mechanical properties was investigated using a tensile machine and a rheometer. Then, a very thin layer of the gel was deposited on an Au electrochemical quartz crystal microbalance with dissipation (EQCM-D) electrode using the electrochemically induced free radical polymerization method. Next, chronoamperometry combined with quartz crystal microbalance measurements, obtained with an Au EQCM-D electrode modified by the gel, showed that the size of the thin layer could be controlled by an electrochemical trigger. Furthermore, it was found that the electrosensitivity could be modulated by the temperature. Such properties are desired from the point of view construction of electrochemical actuators.

Poly(N-allyl acrylamide) as a Reactive Platform toward Functional Hydrogels.

The synthesis of poly(N-allyl acrylamide) (PNAllAm) as a platform for the preparation of functional hydrogels is described. The PNAllAm was synthesized via organocatalyzed amidation of poly(methyl acrylate) (PMA) with allylamine and characterized by 1H NMR spectroscopy, size exclusion chromatography (SEC), and turbidimetry, which allowed an estimation of the lower critical solution temperature of ∼26 °C in water. The PNAllAm was then used to make functional hydrogels via photoinitiated thiol-ene chemistry, where dithiothreitol (DTT) was used to cross-link the polymer chains. In addition, mercaptoethanol (ME) was added as a functional thiol to modulate the hydrogel properties. A decrease of the volume-phase transition temperature of the resulting hydrogels was observed with increasing ME content. Altogether this work introduces a straightforward way for the preparation of PNAllAm from PMA and demonstrates its value as a reactive polymer platform for the generation of functional hydrogels.