Voltage Values Research Articles

Design of Level Sensor Prototype for Fuel Tank in Base Transceiver Station Facilities

A monitoring system for fuel availability at Base Transceiver Stations (BTS) is an absolute necessity. The fuel availability in the generator set must be guaranteed because it ensures the energy supply and continuous operation. This research purpose is to create a robust and effective sensor that can be monitored in real-time so that industry players can estimate the consumption of fuel at the BTS in a certain period. The novelty of this research is that instead of looking at the amount of fuel consumption/reduction like the previous research, this study focuses on how much diesel availability is in the generator tank. So, calculating fuel requirements and predicting actual consumption are done directly. The sensor is a reed-switch oil level sensor and is connected to ESP32 as the microcontroller. It's installed horizontally and uses an optimum distance between sensors of 2.5 mm to improve the sensor reading's accuracy. The test results of converting voltage values into ADC signals on sensor readings produced a determination coefficient of 0.9987, which showed the reliability of the sensor-level design. The sensor precision test results produced an RSD value of 0.17% and the accuracy test produced an error range of -3% to 2% with an average error value of 1.59%. These results indicate that the designed level sensor has good precision and accuracy. Through this research, the provider can predict and plan their fuel consumption needs for BTS power supply and increase the Domestic Component Level in the sensor industry.

Tuning the electrochemical performance of a biphenylene coated metal as the anode for K+-ion batteries

The researchers employed density functional theory (DFT) computations to assess suitability of BP-biphenylene (b-BP) monolayers for application in potassium-ion battery systems. In their evaluations, the researchers considered various factors, like adsorption energy (Ead) of the b-BP monolayer with adsorbed potassium adatoms, in addition to diffusion energy barrier (Ebar) and storage capacity and of potassium ions on this surface. The results indicated that the b-BP monolayer has significantly higher potassium-ion storage capacities, reaching 1026 mAh/g, compared to typical graphite anodes and other carbon materials. The Ebar for potassium ions on the b-BP monolayer was determined to be 0.22 eV. Furthermore, anticipated open-circuit voltage (OCV) values for this material were found to lie within acceptable range of 0.25–1.2 V, making it suitable for use as an anode. These research findings underscore the potential of the b-BP monolayer as an appropriate anode material for potassium-ion battery (KIBs) applications.

A Decoupled Modulation Strategy for Constant Voltage/Current Wireless Charging System Under High Coils Misalignment

ABSTRACTOutput fluctuation and lower transmission efficiency under load and mutual inductance variation are hot concerned in the wireless charging system for power batteries. In this paper, a decoupled tracking strategy is proposed to realize constant voltage (CV) or current (CC) output and high transmission efficiency. The circuit model of series–series compensation network is built, and corresponding transmission characteristics can be derived. First, the load and mutual inductance value can be estimated by measuring the primary electrical information, including the inverter output voltage, current, and the phase error between them. Then load‐independent voltage or current output characteristics under coils misalignment can be maintained by tracking the optimal switching frequency of inverter part. In addition, the value of output voltage or current can be adjusted flexibly for different operation occasions by the employment of pulse‐width modulation. As a result, the load‐independent output characteristics realization and output adjustment can be decoupled. Based on only the primary measuring information, the CV/CC output can be maintained via the proposed hybrid control strategy when the coils misalignment and load variation happen, increasing the robustness of whole wireless power transfer (WPT) system. Furthermore, the soft switching of all power switches in the inverter part can be realized to reduce the switching loss. Compared with previous research, the proposed wireless charging system has a higher power density and a simplified control strategy. Finally, an experimental platform with 60‐V charging voltage and 3.6‐A charging current is built to verify the feasibility of the proposed sys‐tem and control method.

Charge Carrier Density in Organic Semiconductors Modulates the Effective Capacitance: A Unified View of Electrolyte Gated Organic Transistors.

A framework for electrolyte-gated organic transistors (EGOTs) that unifies the view of interfacial capacitive coupling of electrolyte-gated organic field-effect transistors (EGOFETs) with the volumetric capacitive coupling in organic electrochemical transistors (OECTs) is proposed. The EGOT effective capacitance arises from in-series capacitances of the electrolyte/gate electrode and electrolyte/channel interfaces, and the chemical capacitance of the organic semiconductor channel whose weight with respect to the interfacial capacitance is modulated by the charge carrier density, hence by the gate voltage. The expression for chemical capacitance is derived from the DOS of the organic semiconductor, which it is assumed to exhibit exponential energy disorder in the HOMO-LUMO gap. The analytical expression of the EGOT current is assessed on experimental data and shown to accurately predict the shape of the whole transfer curve of an EGOT thus allowing to extract accurate values for the switch-on voltage and the interfacial transconductance, without assumptions on specific response regime and, in OECT, without invoking the volumetric capacitance. Interestingly, the EGOT model recovers EGOFET and OECT as limit cases and, in the latter case, explicitly represents the volumetric capacitance in terms of the energy disorder and the bandgap of the organic semiconductor.

Physical understanding of a normally off p-GaN/AlGaN/GaN HEMT gate stack and a review of VTH measurement techniques

Abstract In this report a comprehensive review of the variations in threshold voltage (VTH) resulting from diverse VTH measurement bias conditions employed by leading manufacturers, as well as VTH extraction techniques is made. Notably, a standard deviation of 15% is observed in threshold voltage values due to variations in measurement bias conditions. This variation is attributed to the change in the lateral electic field conditions across gate and drain which occurs due to the change in bias conditions. Additionally, a simplified physical interpretation of the gate stack in p-GaN gate normally-off AlGaN/GaN on Si HEMTs is made. The formation of the two-dimensional electron gas (2DEG), the charge balance within the pGaN/AlGaN/GaN gate stack, and an analytical expression for threshold voltage are examined. Furthermore, various trapping mechanisms within the gate stack are reviewed to comprehend the dynamic conditions potentially contributing to threshold voltage instability during nominal operation.

Comprehensive study on the optoelectronic properties of ZnSnP2 compound by DFT and simulation for the application in a photodetector

Abstract This article presents the density function theory (DFT) calculation of ZnSnP2 (ZTP) and its application as a photodetector. A DFT calculation has been performed to determine ZTP's optical and electronic characteristics. The direct bandgap of ZnSnP2 is found to be 1.0 eV which agrees well with the previously reported bandgap (0.95 eV). The total density of states (TDOS) of ZTP is determined to be 1.40 states/eV which is attributed to the 3p orbital of P, with minor impacts from the 3d orbital of Zn and the 5p orbital of Sn to TDOS. The real and imaginary dielectric functions and refractive indices ZTP have been determined to be 16.44 and 17.60, 4.07 and 2.92, respectively. The absorption coefficient and reflectivity of ZTP obtained from this investigation are 2.6×105 cm-1 and 57.5%, respectively. After calculating the electrionic and optical properties, ZTP-based n-CdS/p-ZnSnP2/p+-AlSb photodetector (PD) with CdS and AlSb as the window and back surface field (BSF) layers, respectively, has been computationally analyzed and optimized using solar cell capacitance simulator (SCAPS-1D). In a single heterojunction, the photocurrent, voltage, responsivity, and detectivity values have been obtained at 44.52 mA/cm2, 0.66 V, 0.73 A/W, and 6.81×1013 Jones, respectively. Insertion of a thin AlSb BSF layer improves the photocurrent, voltage, responsivity, and detectivity to 48.75 mA/cm2, 0.78 V, 0.86 A/W, and 8.22×1014 Jones, respectively. The outcomes are highly promising for the fabrication of a high performance ZTP-based PD in the future.

Hunter–Prey Optimization Algorithm for Optimal Allocation of PV, DSTATCOM, and EVCS in Radial Distribution Systems

ABSTRACTThis research article instigates a seminal approach for optimizing reactive power in renewable energy sources (RES) and electric vehicles (EVs) coalescing distribution systems, using the innovative Hunter–Prey Optimization (HPO) algorithm in conjunction with DSTATCOM as a reactive power compensator. The proposed methodology aims to minimize losses, enhance voltage stability, and improve overall system performance by simultaneously optimizing reactive power flows in photovoltaic RES (PV_DG), EV charging stations (EVCS), and DSTATCOMs within the distribution system. Simulations carried on IEEE‐33, IEEE‐69, and IEEE‐118 test bus systems in MATLAB environment demonstrate that the HPO‐based approach achieves a 91.47% and 96.61% reduction in real power losses and an improvement in voltage profile with a minimum voltage value of 0.991 and 0.994 p.u. (respectively for IEEE‐33 and 69 bus systems), compared to traditional algorithms. These results highlight the lofty performance of the HPO method, effectively addressing the challenges posed by the integration of RES and EVs along with DSTATCOM.

Key environmental parameters and numerical prediction model of jellyfish bloom in Qingchuan Bay Nuclear Power Plant, China

In recent years, there has been a notable increase in cooling water intake blockage caused by marine organism blooms at coastal nuclear power plants worldwide, resulting in shutdowns of nuclear power plants and large economic losses. A sizable portion of these incidents were caused by blooms from jellyfish, a planktonic invertebrate with a unique growth pattern. Suitable external conditions are conducive to the rapid growth of jellyfish, and blooms can occur within a few days. In order to better predict jellyfish bloom and enable nuclear power plants to prepare for it in advance, this study explores the numerical relationship between jellyfish biomass and environmental parameters. A series of time windows (evaluation intervals) were defined and constructed by a time-series recursive approach, which solved the problem of poor correlation between jellyfish biomass and environmental parameters at non-bloom points. The optimal time window length D = 10 was obtained, and the key environmental parameters affecting jellyfish biomass were screened as sea surface temperature, salinity, voltage value, dissolved oxygen, and chlorophyll. According to the ADF and KPSS tests, the key parameters have no significant time dependence, which ensures the stability and reliability of the subsequent predictions. The jellyfish bloom prediction model was derived by calculating the score F through the recursive Principal Component Analysis of the key environmental parameter in the time interval preceding the prediction point. The sudden change moments of score F correspond well to the jellyfish bloom moments, and the sudden change moments are all advanced for a period of time compared to the bloom time, which can provide valuable time for the nuclear power plant to organize manpower to deal with the blockage. Finally, a maximum score F threshold model was proposed to be coupled with the jellyfish bloom prediction model to provide a more robust basis for early warning of jellyfish at nuclear power plants.

ПРИСКОРЕНИЙ ЕКСПЕРИМЕНТАЛЬНИЙ МЕТОД ВСТАНОВЛЕННЯ ФУНКЦІОНАЛЬНОЇ ЗАЛЕЖНОСТІ МІЖ ПУСКОВИМ МОМЕНТОМ АСИ- НХРОННОГО ДВИГУНА ТА НАПРУГОЮ СТАТОРНОГО КОЛА

The features of obtaining the experimental dependence of the starting torque of an induction motor on the supply voltage of the stator have been studied. It is shown that when determining this dependence, the motor operates in short-circuit mode, which leads to rapid overheating of its windings. An accelerated experimental method for determining the functional dependence of the starting torque on the supply voltage has been proposed and justified. This approach allows for a complete series of measurements of the starting torque at different values of stator circuit voltage within a time frame that does not exceed the heating period of the windings from the initial to the rated temperature. A design for the experimental setup has been developed. Mathematical models describing the thermal behavior of the stator windings and the mechanical movement of the analog part of the starting torque measurement channel have been developed, confirming the validity of the proposed method for determining the functional dependence of the starting torque of an induction motor on the stator circuit voltage.

Assessment of homogeneous electro-Fenton process coupled with microbial fuel cell utilizing Serratia sp. AC-11 for glyphosate degradation in aqueous phase

Glyphosate (GLY), a globally-used organophosphate herbicide, is frequently detected in various environmental matrices, including water, prompting significant attention due to its persistence and potential ecological impacts. In light of this environmental concern, innovative remediation strategies are warranted. This study utilized Serratia sp. AC-11 isolated from a tropical peatland as a biocatalyst in a microbial fuel cell (MFC) coupled with a homogeneous electron-Fenton (EF) process to degrade glyphosate in aqueous medium. After coupling the processes with a resistance of 100 Ω, an output voltage value of 0.64 V was obtained and maintained stable throughout the experiment. A bacterial biofilm of Serratia sp. AC-11 was formed on the carbon felt electrode, confirmed by attenuated total reflectance-Fourier transformed infrared (ATR-FTIR) and scanning electron microscopy with energy dispersive spectroscopy (SEM-EDS). In the anodic chamber, the GLY biodegradation rate was 100% after 48 h of experimentation, with aminomethylphosphonic acid (AMPA) remaining in the solution. In the cathodic chamber, the GLY degradation rate for the EF process was 69.5% after 48 h experimentation, with almost all of the AMPA degraded by the in situ generated hydroxyl radicals. In conclusion, the results demonstrated that Serratia sp. AC-11 not only catalyzed the biodegradation of glyphosate but also facilitated the generation of electrons for subsequent transfer to initiate the EF reaction to degrade glyphosate. This dual functionality emphasizes the unique capabilities of Serratia sp. AC-11, it as an electrogenic microorganism with application in innovative bioelectrochemical processes, and highlighting its role in sustainable strategies for environmental remediation.

Curcumin‐Loaded Co‐Axial Electrospun Chitosan/Polyvinyl Alcohol/Calcium Chloride Nanofibrous Membranes for Wound Healing Enhancement

AbstractNanofibrous membranes were developed by combining chitosan (CS), polyvinyl alcohol (PVA), and calcium chloride (CC) to incorporate curcumin (CCM) through a co‐axial electro‐spinning method to improve CCM bioavailability. The optimal parameters were PVA/CS ratio of 7:3 v/v, PVA/CCM ratio of 8:2 v/v, CC amount of 0.5 g, fiber collection distance of 15 cm, voltage value of 18 kV, and injection flow of 0.1 mL/h (both core and shell layer). The prepared PVA/CCM@CS/PVA/CC nanofiber showed smooth surfaces and uniform bead‐free morphology with core‐shell structure. The average fiber diameter was 301.55 ± 76.77 nm with a narrow distribution. Using the Korsmeyer‐Peppas kinetic release model, the nanofiber membrane effectively released ∼85% CCM at pH 7.4 over 96 h via Fickian diffusion transport mechanism. In vitro antibacterial tests demonstrated that the membrane was efficient against both Gram‐positive (Staphylococcus aureus) and Gram‐negative (Pseudomonas aeruginosa) bacteria. When compared to free CCM, the membrane improved cell survival due to its nontoxic and cytobiocompatible features. In vivo tests found that the membrane significantly improved healing in incised‐wound rats, reducing inflammation, fibroblast proliferation, and collagen deposition. These findings indicate that the novel PVA/CCM@CS/PVA/CC nanofiber membrane, which has numerous biological functions, could be a promising candidate for wound dressing therapeutic applications.

Зависимость потенциала на рельсах от сопротивления заземляющего устройства тяговой подстанции и параметров рельсовой линии

Purpose: to analyse the dependence of the potential on rails on the track coordinate at different values of conductivity of the grounding device of the traction substation (g0 = 0 S, 10 S, 25 S, 50 S). Methods: the analysis was carried out on the developed substitution diagram of the traction rail network section using the method of nodal potentials. The calculation was implemented in Mathcad 15 mathematical package. Selection of initial data was carried out taking into account the values established in the current normative documentation. Results: an equivalent substitution scheme of the traction rail network on a double-track section has been developed, in which each homogeneous section of the rail line is replaced by an equivalent U-shaped quadrupole. This allows to transform an electric circuit with distributed parameters into a circuit with concentrated parameters. If it is necessary to simulate transverse or longitudinal asymmetry of traction current in a section, such a section is replaced by a three-wire substitution diagram in which the earth conductor is taken into account. To improve the accuracy of the modelling results, the inter-track jumpers are taken into account, and the number of nodal potentials is increased to 7. It is established that the highest modulus value of voltage on rails is observed near the traction substation. It has been determined that the voltage value on rails near the traction substation decreases when the conductivity of the earthing device increases. Practical significance: values of rail-ground potential at different values of conductivity of grounding device of traction substation for tracks of both directions of traffic — even and odd tracks — are determined. The value of conductivity of the traction substation grounding device at which it is safe for the personnel to stay on the rails near the traction substation has been determined. The obtained results can be recommended for practical use in railway transport.

Design and study of a separated stick-slip piezoelectric actuator

ABSTRACT The stick-slip type actuator based on the stick-slip driving principle has the characteristics of simple structure, high precision, large travel and no electromagnetic interference. However, the stick-slip driving principle leads to the existence of the displacement backward phenomenon when it is driving in a single direction, which reduces the output performance of the driver. In order to solve the above problem, a stick-slip separated piezoelectric actuator with separable stator and actuator is designed by combining the advantages of lever mechanism and triangle mechanism in this paper, and theoretical calculations and simulations on the flexible hinged amplification mechanism are carried out. The prototype of the stick-slip separable piezoelectric actuator is made, and the output characteristics and speed characteristics of the actuator are experimentally tested to determine the optimum voltage and frequency values for practical operation.

Total ionization dose and electromagnetic pulse synergistic effects on low dropout linear regulator

As a power management chip widely used in various electronic systems, the low dropout regulator (LDO) plays a crucial role in the normal operation of electronic systems. Ionizing radiation and electromagnetic pulse (EMP) radiation can cause interference and damage to the LDO, posing risks to the proper functioning of electronic systems in large-scale scientific devices. In this study, through separate experimental investigations on the Total Ionizing Dose (TID) effects, EMP effects, and synergistic effect of the LDO, it was found that parameters such as the LDO output voltage decreases with increasing irradiation dose, with more severe degradation observed under grounded bias. The EMP effects mainly cause oscillations in the LDO output voltage and a slight increase in its mean value. The results of the synergistic effect experiments indicate that there is a certain synergistic interaction between the TID effects and the EMP effects. The synergistic effects lead to an increase in the amplitude of the oscillations and changes in the mean value of the output voltage.

Non-Volatile Resistive Switching in Nanoscaled Elemental Tellurium by Vapor Transport Deposition on Gold.

Two-dimensional (2D) materials are promising for resistive switching in neuromorphic and in-memory computing, as their atomic thickness substantially improve the energetic budget of the device and circuits. However, many 2D resistive switching materials struggle with complex growth methods or limited scalability. 2D tellurium exhibits striking characteristics such as simplicity in chemistry, structure, and synthesis making it suitable for various applications. This study reports the first memristor design based on nanoscaled tellurium synthesized by vapor transport deposition (VTD) at a temperature as low as 100°C fully compatible with back-end-of-line processing. The resistive switching behavior of tellurium nanosheets is studied by conductive atomic force microscopy, providing valuable insights into its memristive functionality, supported by microscale device measurements. Selecting gold as the substrate material enhances the memristive behavior of nanoscaled telluriumin terms of reduced values of set voltage and energy consumption. In addition, formation of conductive paths leading to resistive switching behavior on the gold substrate is driven by gold-tellurium interface reconfiguration during the VTD process as revealed by energy electron loss spectroscopy analysis. These findings reveal the potential of nanoscaled tellurium as a versatile and scalable material for neuromorphic computing and underscore the influential role of gold electrodes in enhancing its memristive performance.

Sensor response and radiation damage effects for 3D pixels in the ATLAS IBL Detector

Pixel sensors in 3D technology equip the outer ends of the staves of the Insertable B Layer (IBL), the innermost layer of the ATLAS Pixel Detector, which was installed before the start of LHC Run 2 in 2015. 3D pixel sensors are expected to exhibit more tolerance to radiation damage and are the technology of choice for the innermost layer in the ATLAS tracker upgrade for the HL-LHC programme. While the LHC has delivered an integrated luminosity of ≃ 235 fb-1 since the start of Run 2, the 3D sensors have received a non-ionising energy deposition corresponding to a fluence of ≃ 8.5 × 1014 1 MeV neutron-equivalent cm-2 averaged over the sensor area. This paper presents results of measurements of the 3D pixel sensors' response during Run 2 and the first two years of Run 3, with predictions of its evolution until the end of Run 3 in 2025. Data are compared with radiation damage simulations, based on detailed maps of the electric field in the Si substrate, at various fluence levels and bias voltage values. These results illustrate the potential of 3D technology for pixel applications in high-radiation environments.

A simple hot wire temperature drift correction based on temperature sensitivity applied to a turbulent shear layer

A procedure is proposed to correct temperature drift for hot wire anemometry measurements in turbulent fields where the facility is not equipped with temperature control. The procedure consists of evaluating the wire sensitivity to the temperature by building a voltage-temperature curve. The voltages of both the calibration points and the measurement points are corrected, shifting the voltage values to an arbitrary reference temperature. The correction can be applied to the instantaneous voltages by performing synced temperature measurements with constant current anemometry or constant voltage anemometry cold wire. The efficacy of the method is tested on a turbulent shear layer that develops on the side of an open jet wind tunnel not equipped with temperature control. The velocity statistics show a good match with respect to reference particle image velocimetry measurements, evidencing the self-similarity of the shear layer in contrast with the non-corrected data and the data corrected using the semi-empirical and analytical relation based on King's law modification. A correction based only on the temperature statistics shows indistinguishable results with respect to the instantaneous correction.

Electronic modulation towards MOFs as template derived CoP via engineered heteroatom defect for a highly efficient overall water splitting

The reasonable design of material morphology and eco-friendly electrocatalysts are essential to highly efficient water splitting. It is proposed that a promising strategy effectively regulates the electronic structure of the d‐orbitals of CoP using cerium doping in this paper, thus significantly improving the intrinsic property and conductivity of CoP for water splitting. As a result, the as-synthesize porous Ce-doped CoP micro-polyhedron composite derived from Ce-ZIF-67 as bifunctional electrocatalytic materials exhibits excellent electrocatalytic performance in both the oxygen evolution reaction (OER) and the hydrogen evolution reaction (HER), overpotentials of about 152 mV for HER at 10 mA cm−2 and about 352 mV for OER at 50 mA cm−2, and especially it shows outstanding long-term stability. Besides, an alkaline electrolyzer, using Ce0.04Co0.96P electrocatalyst as both the anode and cathode, delivers a cell voltage value of 1.55 V at the current density of 10 mA cm−2. The calculation results of the density functional theory (DFT) demonstrate that the introduction of an appropriate amount of Ce into CoP can enhance the conductivity, and can induce the electronic modulation to regulate the selective adsorption of reaction intermediates on catalytic surface and the formation of O* intermediates (CoOOH), which exhibits an excellent electrocatalytic performance. This study provides novel insights into the design of an extraordinary performance water-splitting of the multicomponent electrocatalysts.

Design of a Conformal Ablation System Based on Independent Control of Radiofrequency Electrode Arrays

This study aims to develop an independent control system for radiofrequency electrode arrays, intended for the conformal ablation of unwanted tissues. Unlike traditional single radiofrequency voltage applications, this study employs high-frequency transformer isolation and radiofrequency load matching technologies to divide the radiofrequency signal source into eight independent groups. Each group operates at the same phase and frequency but with different voltage values. Experimental results indicate that the designed system can independently output various combinations of radiofrequency signals. The actual output voltage has a relative error controlled within 6%, the frequency error is less than 0.5%, and the phase difference among the groups is less than 1°. In the biomimetic tissue heating experiments, it is found that by controlling the voltage of each electrode within the electrode array, ablation of different shapes can be achieved, and the ablation depth is positively correlated with the applied radiofrequency voltage.

Rotaxane Based Molecular Junctions Have Emerged as Promising Components For Electronic and Optoelectronic Applications

Background: Rotaxane molecule consists of three main parts: wheel, axle, and stoppers. This study was conducted to increase the number of wheels to get the electronic, electrical and thermal properties of Nano molecular junctions based on rotaxane. Materials and Methods: Calculations were performed to evaluate the transport properties and the geometrically optimization of these molecular junctions using a combination of DFT, SIESTA code, Gollum code and a non-equilibrium Green’s function formalism. Each molecule was attached to opposing 35-atom (111) directed pyramidal gold electrodes. DFT and GGA were used to compute the ground state energy of various molecular junctions. Results: The results of the T(E) showed high values, and this is evidence of that constructive interference that is controlled and reinforced by changing the number of wheels in the rotaxane molecules, which affected the HOMO-LUMO gap and thus contributed to raising or lowering the T(E) values. The relationship between G/Go and thermopower showed that the highest G/Go yields to low thermopower. The decay constant is a fundamental property that influences the transmission of electrons, conductance properties, and threshold voltage in the rotaxane molecules. Conclusion: Molecular junctions based on Rotaxane showed high values of the T(E), which increase the electrical conductivity, making them promising for electronic applications. The smaller value of threshold voltage is a useful property for different applications. The results of power factor bring to us an important conclusion, which is that the impact of G/G0 is more dominant than that of thermopower in the case of rotaxane molecular junctions.